Volume down 5% after you connect the removable device

Similar Questions

• Cannot connect the removable devices to virtual machines

  Hi people,

  I'm trying to connect any device USB to my virtual machine, having read all the guides, I don't see any of my USB dconnected the removable devices tab.

  VMware tools are installed.

  I'm using VMware Workstation - 8.0.6 build 1035888 on Windows 8, 1 - updated with the latest updates.

  

  Can someone help me?

  Thank you

  D.

  Following your response, I found the solution:

  Configuration of Windows compatibility:

  '

• Qosmio G50 - 12 q - Vista does not load after you connect the external USB keyboard

  I could acquire an enermax acrilux usb keyboard and have connected the keyboard taken 12 q at the same level where another keyboard was attacked the qosmio g50 usb and it worked without problem.

  After to start the PC with keyboard eneramx connected the qosmio has not loaded windows vista Ultimate edition and the inside wheels have been activated.
  Never happened before. I doubted the enermax

  Reconnected to the position of the qosmio USB, there on the back not granted to start-up of turbines problems
  As the enermax, that he has never blocked the startup of the operating system and to activate turbines also have plugged into the same USB port to which priority was connected a keyboard?

  Tank you

  Hi mate

  Sorry, but you message I am really hard to understand
  What I understand is that you connected an external keyboard on the Qosmio and now the laptop will not boot properly. Is this good?

  What to say; Maybe you disable USB legacy mode in the BIOS.
  Please check this!
  To enter the BIOS press F2 and everything by turning on the laptop.

• No sound after you connect the headphones.

  I have a pavilion dv6 laptop.  I have a headset that I want to use for the games, but I can't hear sound through them.  When I do my helmet of communication to the default device it doesn't let me.

  Hello Jack,.

  I certainly understand the inconvenience that you cross.

  It is possible that this problem would have occurred due to some incorrect settings or because of an incompatible or corrupted audio drivers.

  Important: Make sure that your headphones are not connected to the line (headphone) jack of your sound card or computer (unless you want to be listening with headphones rather than speakers). When you connect in the headphones, most computers automatically cut the sound to the speakers. Ensure that the headset is completely and firmly inserted into the correct socket. Plug in the headphones and see if the same appears in Device Manager.

  In order to understand the issue more clearly, I would ask that kindly provide me with the following information.

  1. Have you tried plugging in external speakers or any other helmet and checked if you are able to hear the audio?
  2. You are able to get the sound on your laptop's built-in speakers?

  If you are not able to hear the audio on the built-in speakers or other external speakers or any other headset, I would suggest trying the following methods and check if it helps.

  Method 1:

  Open the hardware and devices troubleshooter.

  Note: If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  If the problem persists, please follow method 2.

  Method 2:

  Check with the volume controls. Please follow the steps below and check if it helps.

  (a) right click on the speaker icon in the taskbar, then select volume control options.
  (b) check on "all devices evolving sound.
  (c) make sure that you have "Default uncontrolled communication device".
  (d) place a check on the speakers and headphones. Click on apply and OK.

  If the problem persists, follow method 3.

  Method 3:

  This occurs when you have the speakers, by default. We need to put the headset as default. Please follow the steps below and check if it helps.

  • Exercise the functions mentioned below to set the speakers as default.

  • Click Start and click on Control Panel.

  • Click sound, and then a new window will open.

  • In the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.

  • Now, check if the headset is listed there and right-click on it and choose activate.

  • To highlight this helmet and click "set as default".

  Also try to install the latest drivers from the chipset in the system and check if it helps.

  If the problem persists, follow method 4

  Method 4:

  I suggest you to refer to the procedure described in the article below and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The above article will help you identify and solve its current problems in Windows, including no sound from your speakers or headphones.

  I hope this information is useful.

  If the problem persists, you can write to us and we will be happy to help you further.

  Thank you

• Message: this device could better work with usb 2.0 when you connect the USB device.

  Original title: USB 2.0

  I get the message "this device could better work with usb 2.0", how do I change 1.0?

  I get the message "this device could better work with usb 2.0", how do I change 1.0?

  To answer your question directly: you replace with USB 1.0 (most likely USB 1.1) USB 2.0 by the purchase of new equipment.

  If you have a desktop computer, you can buy an internal with several Sockets USB 2.0 card.

  If you have a laptop, you can get a card with 2 ports USB PC Adapter 2.0

  Before you buy anything, however, if you have a desktop computer, it is possible that some (but not all) of your taken USB is 2.0.  Open the Device Manager (start > run > devmgmt.msc > OK), click on the + sign next to the category "Controllers of Bus USB" and watch the 'Host controllers' listed there.  If any host controller is 'enhanced' then you have at least one (and probably 2) USB 2.0 taken somewhere on the computer.

• How to remove a schema after having connected the expdp session

  Dear Experts,

  How to remove a schema after you connect the expdp session?

  I'm not able to reach a work

  
  [oracle@orcl28 ~]$ expdp system/****  attach=SYS_EXPORT_SCHEMA_01
  
  
  Export: Release 12.1.0.1.0 - Production on Mon Jan 18 02:23:26 2016
  
  
  Copyright (c) 1982, 2013, Oracle and/or its affiliates.  All rights reserved.
  
  
  Connected to: Oracle Database 12c Release 12.1.0.1.0 - 64bit Production
  ORA-39002: invalid operation
  ORA-39000: bad dump file specification
  ORA-31640: unable to open dump file "/home/oracle/datapump/UREPJ.dmp" for read
  ORA-27037: unable to obtain file status
  Linux-x86_64 Error: 2: No such file or directory
  Additional information: 3
  

  You have this table in the schema of SYSTEM-SYS_EXPORT_SCHEMA_01?

  Delete this table, and then try again.

  Aman...

• Unable to connect to the Internet after you install the update

  My computer crashed this afternoon. I restored it since restoration, but Firefox lost disk and my Trend Micro antuvirus.  I downloaded the two products, but when I try to install them, they are trying to reconnect to the internet to complete the download.  Or the program is able to do.  I can log on the Internet and to allow them there have turned off the Windows Firewall and Windows Defender, suspecting one of them was blocking the remote connection.  I am running Windows Vista and IE8.  When I Windows Update, I lose all internet connections and have to use system restore to go back before the updates.

  Original title: remote connections

  Hi Cauvagee,

  ·        You are able to access remote desktop connection now after you disable the firewall and Windows Defender?

  It seems that one of the update is at the origin of the problem of Internet connectivity. You can follow the steps below and check it it helps you solve the problem.

  Step 1

  You can access to view the history of update on your computer and the Coachman, who was the last update that was installed when this problem occurred and post back the details of the update.

  To view the update history, follow the steps below:

  a. open the control panel (all items view), and click the Windows Update icon.

  b. click on the link to view update history.

  Step 2

  Check out who are the updates which has been installed on the computer before that the problem began, later, uninstall it and check if that helps.

  1. Open installed updates by clicking on theStart button, clickingControl Panel, clickingPrograms and then underPrograms and features, clickingView updates installed. Note the number KB for the updates have been installed before this problem started.
  2. Select the update that has been installed and uninstall the updates one by one and check the update which is at the origin of the problem.

  Step 3

  Once you take note of the update that causes this problem, you can download the stand-alone version of the update on your desktop and try to install it manually and check to see if it helps you to solve the problem of internet access. To download the standalone version of windows updates follow the steps below:

  a. take note of the update with the Ko only when your computer tries to update and install it.

  b. visit the following Microsoft Web site:http://www.microsoft.com/downloads/Search.aspx

  c. search by downloading the update.

  d. save it on the desktop.

  e. try to install it manually.

  If the problem persists after you have installed the stand-alone version of update, you can try to start the computer in safe mode with network and check if you can connect to the internet and post back the result. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start it in safe mode with select network and press ENTER.

  Access the link to learn more about how to start the computer in safe mode:http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to the home network after you connect to the internet at Duke University

  Noteboook W7 Pro cannot reconnect to the network after you connect to the internet as a comments/visitor at Duke University.  The Duke system is predatory changes to my computer, and I can't fix it with the restoration of the system.   The home network is a Windows workgroup with most XP, no password only required machines.  This has happened in the past when the guest was an XP machine too, and then he had something to do with the DNS settings.  Cost me a lot of time and anguish and loss of productivity.

  Hello

  1. do you get an error message? If Yes, what is the exact full error message?

  2. are you able to connect to the internet?

  See the help article and check if it helps.

  Method 1

  Identify and resolve home network problems

  http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows#section_2

  Method 2: Check if the problem persists in the boot.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know the status of the issue.

• After you import the virtual machines in LM, can I remove VC

  Hello

  I had a couple of machines to import the configuration of another admin... After you import the virtual machines in LM, can I remove the virtual machines, I imported VC? I now have more need to fight them with VC. LM depends on of these always after import?

  I do not believe, but you can rename the folder and see if something is complaining.  If it isn't, it is probably safe to delete.

• How can I find the results of a 'chkdsk' after you restart the computer?

  Original title: checkdisk

  How can I find the results of a 'chkdsk' after you restart the computer. I am running "Vista Home Premium"

  Hello

  CHKDSK (short for Checkdisk)-<-- see="" the="" vista="" log="">
  http://en.Wikipedia.org/wiki/chkdsk

  Journal of checkdisk is EventViewer which is easy to read with the 2nd utility here.

  Look in the Event Viewer to see the newspaper.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  Control Panel - Classic view - administrative tools - event - left panel - Windows logs Viewer - under the
  above - click on request - in the middle column, scroll down the list that indicates the Source - click Wininit.
  good Panel - Wininit event - click on the event properties - new window will open with the journal you want.
  Scroll as needed. Event ID is 1001.

  ---------------------------------------------------------------------------------

  If you clear the log before you checkdisk annex, it is easier to find but by time and Date
  should be easy enough.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The event GWX.exe messages must remain on the computer after you made the reservation for a copy and agree to receive their copy?

  The event GWX.exe messages must remain on the computer after you made the reservation for a copy and agree to receive their copy?  It certainly is learning to be OVERLOAD on these messages and would like to know if it is OK to remove them and what to do to STOP these messages.  I asked the program and I've been accepted/approved/reassured that will ship a copy - JUST WANT TO KNOW IF I CAN REMOVE THIS sort of THINGS NOW, OR should she REMAIN ON MY COMPUTER?  It's the only question I have that needs to be answered. Thank you

  ybliku2

  Since early may, Microsoft began providing updates prerequisite for these systems for the upgrade. Known as the get Windows 10 app (GXW) this KB update installs the mechanisms to verify your system readiness and download Windows 10 through Windows Update. Users will see a notification added to the taskbar allowing users of the availability of the operating systems and of the possibility to book the update and download automatically on July 29^th 2015.

  You can also download Windows 10 as one. ISO file and do the upgrade manually:

  How to: upgrade previous versions of Windows using the file ISO for Windows 10

• I'm trying to install Office note 8.1 but get this error message immediately after you enter the serial number and authentication code.

  Remark Office OMR

  I've been remark office omr 8.1 installed on 32-bit windows vista (intel pentium DC) for the last year laptop. Now plan to move it to a more recent hardware and the OS.

  I'm trying to install Office note 8.1 on Windows 7 Home Basic 64 bit (on laptop AMD E450 DC base). But am getting this error message immediately after you enter the serial number and authentication code. I tried to install different versions of the .net Framework (from 1.1 to 4), but nothing seems to solve the problem.

  I even tried to install it in mode compatibality. but no luck.

  Here is the error message (between BEGIN and END lines)

  -BEGIN-

  An error occurred instantiating the object of authentication. Please restart your computer, and they run the Setup again.
  Error number = 2147219705

  Error = description

  ------ END--------

  Appreciate any help

  Thank you

  SJ

  Just for the follow-up of this: I have sent comments, and they responded in 20 minutes with:

  Please contact the Support of the note.  I'm sorry that you are experiencing this error, but it seems by the error message that you install note on a Windows 7 computer.  This error is caused by a Microsoft security update that was released in July 2011 for Windows 7 and caused upward to change our software.  Here is access to our Download Center for you to install the version 8.4 of note.  You will use your current serial number, license key and authentication code.
  They then provided a link to their Download Center where I could download 8.4
  E - mailer to * address email is removed from the privacy * and they will answer you. They have great customer service.

• having problems become my printer to work after you download the compatible driver loading. Also I can't open a Web site from a link

  2 problems

  1. always problems to get my printer to work after you download the compatible driver loading.  I have a HP7660 and was instructed to use a driver for HP 5600.  Printer still does not print.
  2. when I go on a website of my e-mail address, Web site opens, but if I click on a link in this site open, the connection is not open.
  Any suggestion would be appreciated.  Thank you

  In regard to # 2 have a look here.
  For hyperlinks doesn't work does not (usually in email)

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;310049

  The printer will print even a test page? Have you tried that?

  HP Print doctor for help with many printing problems

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c02073861&JumpID=ex_r4155/HHO/IPG/ccdoc/trailhead_doc&lang=en

  I hope this helps.

• Why the highlighting of text in a PDF document does not work after you save the file

  Why the highlighting of text in a PDF document does not work after you save the file

  What application you use to highlight?

• Apple tv 3 - after you enter the pwd wifi which button do to support on submit?

  Apple tv 3 - after you enter the pwd wifi what the control button I press to submit?

  Apple TV V3

  Using data of the remote control, select submit, click on the Center button.