On the latest nightly of Firefox when viewing YouTube videos, or any other site that offers html5 video, my sound is automatically triggered, about 50%, or 100%. This happens with both h.264 and VP8. I tried in safe mode and with a new profile, does not. I have alsa and pulseaudio, but if I open a YouTube tab and watch alsamixer, he will jump from there where I got 100% as soon as the video starts to play.
I tell myself that I will probably need to post a bug report, but I thought I'd try here everything first.
I put "dish-volumes = no" in my etc/pulse/daemon.conf. He's not big, but it solves the problem for now.
I copied a few videos from Sony (Mini-DV) camcorder via the Firewire connection on my machine.
Image and sound quality... usually brilliant!
However some scenes include high volume music (in a case from a choir in a church and the other a 'disco' with a load of children dancing). In both cases, I noticed that the volume has increased the video began to become jerky and freeze periodically. At first I thought that the problem was with the files but I found if I turned off the volume on my computer has become smooth image with no stutters at all (by chance). Then I found that I could increase the volume up to 30-40% and the image was reasonably smooth with only the odd momentary gel.
In conclusion, nothing wrong with the files (avoid in any case), but something wrong with my computer (or at least it has a severe limitation) that I can't play those avi files at full volume.
I'm not a fan of computer, so all I could think to do was watch CPU useage while the video I did played by using the Task Manager - while the video was in use between 9 and 12% CPU.
Grateful for any help that I can enjoy the full glory of these videos on my machine, especially choral bits.
Concerning
Lindsay
Hope someone can advise.
I copied a few videos from Sony (Mini-DV) camcorder via the Firewire connection on my machine.
Image and sound quality... usually brilliant!
However some scenes include high volume music (in a case from a choir in a church and the other a 'disco' with a load of children dancing). In both cases, I noticed that the volume has increased the video began to become jerky and freeze periodically. At first I thought that the problem was with the files but I found if I turned off the volume on my computer has become smooth image with no stutters at all (by chance). Then I found that I could increase the volume up to 30-40% and the image was reasonably smooth with only the odd momentary gel.
In conclusion, nothing wrong with the files (avoid in any case), but something wrong with my computer (or at least it has a severe limitation) that I can't play those avi files at full volume.
I'm not a fan of computer, so all I could think to do was watch CPU useage while the video I did played by using the Task Manager - while the video was in use between 9 and 12% CPU.
Grateful for any help that I can enjoy the full glory of these videos on my machine, especially choral bits.
Somehow, I got an incredibly high score from 1292 to Spider Solitaire. I was playing on beginner level. Looks like a bug. What should I do?
Hi IanCandy,
If you think you have found a bug in a Microsoft product, please contact our Department of Support technique Microsoft to report a bug to Microsoft product.
Hope the helps of information.
Concerning Joel S Microsoft Answers Support Engineer Visit our Microsoft answers feedback Forum and let us know what you think.
I find myself having to manage my OS (win 7) levels of volume constantly with the new video player default html5 when moving between programs (foobar, vlc, youtube, etc.). Youtube HTML5 videos are now really quiet. In the past, I was able to configure my os volume really low master because flash become saturated and move seamlessly audio, production of programs. For example I have attached two sample screenshots, volume counters, one html5 on the other with the playback of the flash. Those that have been taken at the same time and the video. Is there something that can be done? Is this a firefox bug (37.0.2)? I tried this in chrome and it did not have this problem. Any help would be appreciated
The HTML5 audio player not support since apparently version 11 volume control. We are now at version 26. Is there a plan to restore a volume control
Here is a variation on the script. Two major differences. First, it inserts a little bubble with a character and only shows the cursor when you hover over that. Second, it is designed to add the controls next to any audio < > without any customization, so there is a chance that it will work on your PBX page, assuming it is the space for the cursor.
I've got G20 (2.13 Ghz processor) and nVidia 128 MB GeForce Go 6600 and I noticed that when you run video that my CPU utilization goes up high enough. View tv goes up to about 80%, video in media player substantially the same, but the video clips on Web sites and sites with video banner Web can get up to 100%.
I don't know if this normal that I had not really noticed before, but lately, with this hot weather, I found that on the days hottest occasionally my system stopped, probably because the fan may not follow.
My question is if these ages CPU usage % are normal for this system, or I have some setting wrong that puts the load on the processor and not the graphics card. Can someone tell me if I can check how the video processing is done by the graphics card or how I can assure that this is the work and only in passing on overloading the CPU.
Thank you very much.
PS I am running the latest drivers video for this machine, obtained from the Toshiba draft.exe page.
Hi William
I had a lot of experiences with Qosmio G20 and activity of the CPU under pressure. With the use of the highest processor unit was never overheated just a little harder because of cooling fan.
As you know Qosmio G20 is powerful multimedia and video unit problem described in your message is really strange. If you wrote that you don't l l notice that before, I assume your personal configuration is responsible for this. On this path, it is not easy to say why this is happening. Try to check the processes running and at the end all of them you don't need. On this way the CPU use should be much lower.
Hi, I was wondering if someone could help me incase im just stupid, before the firmware update, I have been able to affect the level of normal volume or high (not quite sure, where I also had, but it was in music / audio settings) but now I can not find. Does anyone know if it is still there or if we remove them?
The largest volume I can get with the wheel turn, the level is too low to hear it on the machines, the YMCA, when doing the exercises. I have the latest firmware update (I'm in the U.S. region.). Y at - it a setting I can use to enhance the level of noise?
Phil
PRPluta wrote: I'm reading the forum that the EU sets lower volume, but I put the settings for the region of the USA. I have updated the firmware... bought yesterdaya you laatest Fuze yesterday so this is my first experience of rocket.
Phil
There is a setting you may have missed. On the "rocket", go to settings / system settings / Volume and make sure it is set on high. This is the setting that the EU region is not available.
I've done a video no audio in Adobe Captivate, I do a project, while I recorded my audio on my iphone when I imported the video from adobe it lost QUALITY look this photo Imgur , you see on the right (low quality), on the left (high quality)
What is the size of the image of the clip, and what is the sequence? As in both 1920 x 1080 or what? Also what is the frame rate of the clip and it is constant or variable rate (CFR). If you are unsure you can download MediaInfo and drop a clip on it. Do a screengrab of the tree of this and post back here using the camera icon.
I'm trying to transfer high definition 1080i video from my Sony camcorder to my desktop HP [HP Pavilion Elite e9160f desktop PC]. I need to know the appropriate method on the transfer. I have been informed that I need to have an internal firewire card installed in order for me to transfer video HD on my PC. Can you get it someone please let me know if this is correct and if yes is my PC/motherboard able to manipulate the internal firewire card and also the type of firewire card I need i.e. PCI/PCI Express, minimum or maximum speed I need to transfer video high definition without framing or gel, for example if it is to be a minimum of 400 MB/s. And tips and suggestions are appreciated.
Windows 7 probably has the drivers for the card. The latest firewire cards are included with the built-in drivers in Windows 7
Captivate 8 - video integration problems. Video won't play Web server when published under the title of course HTML5 and video is selected to play in the same screen. Play video it works only in a new window. The problem is the customer's requested integrated video and it shows as an option in Captivate 8. In addition, the video screen is not at the same place on the screen, the image moves to the top of the browser window in Internet Explorer. Graphics problems appear ONLY in IE and Chrome for PC. We have updated browsers, installed all updates to Captivate 8 etc.
The issue seems to be with internet explore. The url is *.mp4, if IE browser opens Media player in a new window to read the files.
Workaround solution:
Instead of using the interaction of the Web object, you can use a Web object (objects-> Web) site in the menu object.
After insertion, select the code incorporated in the style of the real property section. (Screenshot below)
Encapsulate the url in an HTML video tag and use it as input.
I use Premiere Elements 4.0, and I would like to create a Flash video in 720 p from a 720 p input file.
Use the presets, I can create a MPG 720 p without problem, but there seems not to be greater than 640 X 480 setting of Flash Video. Is there a way to create a FLV to HD format so that it will be displayed as HD on You Tube?
Thank you
Rich Locus
The best solution we found is the video as a MP4 high-definition output and YouTube re - encoding in FLV format, by the frequently asked questions to the right of this forum.
You're not going to get any higher quality ranging from FLV to FLV, because the program still him convert to its workflow in any case format (AVI or MPEG and HDV) while working with her. Additionally, the biggest quality problems appear when YouTube starts to screw with it, that there is no way around.
Give him a H.264 file, and you will get the best possible results.
I had the battery replaced last month in my Macbook pro 15 "on the apple store and since then the speakers looks blurry / distortion when the volume is completely.
I have a 8100 Tecra which was under Windows 98. I upgraded to Win2000P but I can't get the right amount of colors or greater than 600 x 800 resolution. Also, I can't load the former driver of BT's broadband services.
In Device Manager, it is required for the video controller (VGA Compatible). I searched the site of Toshiba for a suitable download and can't find something like this.
Does anyone know if the solution to this problem exists on this Web site or if Toshiba can send me a disc with the necessary info.
Another idea of the problem is that it may need a mother board driver, if what can be downloaded?
Sorry if it's vague but I am writing this on behalf of my stepfather, so it is second hand information.
Any help would be greatly appreciated, thanks
Hey Buddy
Looks like you a little confused re. I think I can help you
So to me it looks like a missing display driver. What do you think? Did you install the display driver for W2k?
On the European Toshiba driver page I found a drivers needed for W2k and the display driver is also available. There are 2 display drivers, so check everything first to support it.
You mentioned the driver BT broadband. Did you mean Bluetooth? To my knowledge this device does not have Bluetooth support.
Hi, I wonder if anyone else has problems with the latest iOS. I had lag occur at random points. For example, I could be using safari or an application and have a significant drop in pace. I intend to do a full backup and restore in the future. I did
Hello Planet Earth (HD DVD) to order from amazon and was hopeful that she would be executed on my new laptop. Shame on me!The Toshiba player works well until the menu when it crashes.After some research on googled around and especially looking at the
my laptop keeps going to the start page. No matter which option I choose, IE. safe mode, safe mood with networking, safe mode with command prompt, last known, good configuration start windows normally, it always comes back to the same screen. saw thi
I have a dv71029 and the screen is black. pluged in big screen tv n pc works. what I need to get an LCD from an another dv7 1029 or others done this size? Silver n tight cannot afford news at the moment. Help, please.
Hello I have a fairly old, broken computer that precedes the installed operating system. This system can be removed from the old computer and installed in a newly built computer. Kind regards Steve Bradley.
