Volume / Mute does not not work with IntelliType Pro and ergonomic 4000 KB

A few months ago, controls for volume/mute on my 4000 ergonomic keyboard stopped working. I searched this forum for solutions and found a number of similar problems, but none of the solutions worked on my system. Here is my configuration:

  • Windows XP SP3
  • Card SB Live PCI (audio embedded is disabled)
  • IntelliType Pro 8.15.406 software (updated 5.1; the problem began under this version)

Here is what I tried:

  • Updated drivers SB
  • Use the original car audio system
  • Disable/re-enabling all audio devices
  • Removing the audio streaming software
  • New keyboard 4000 (not for this problem - just need a new one)
  • Return to the Bank of keys customized by default in the keyboard control panel

None of them have worked. Any other ideas?

Thank you...

Chris B

I had the same problem, after a few hours of reading, I found my problem;

  • Run "services.mcs" without the quotes.
  • Locate "Human Interface Device Access.
  • Try restarting the service is running, if it is not executed.
  • Change the "Startup type" to "Automatic" and start the service.

I started the service, and my buttons started working again.

I hope this helps.

Tags: Windows

Similar Questions

  • My Vaio gesture control does not work with MO Pro 2013 Power Point and 14 Ultra CyberlinkPDVD

    My Vaio gesture control does not work with MO Pro 2013 Power Point and 14 Ultra CyberlinkPDVD

    Original title: control sign Vaio

    Hello

    According to my research, the actions must be enabled for individual applications. Check out the following link and activate the gesture for Power Point and Cyberlink PDVD.

    https://us.en.kb.sony.com/app/answers/detail/a_id/36487/~/how-to-configure-vaio-gesture-control-settings.

    For more help, you can contact Sony support.

    https://community.Sony.com/?XID=M:kb_header:eSupport

    Hope that the information provided is useful. Do not respond if you need more help.

  • On HP DV9000 (DV9700) volume slider does not work with Windows 7

    There is not too long, the volume button, next to the volume on my laptop cursor no longer works.  After reviewing the comments I found, has been able to adjust the volume switch number, by shutting down the PC, unplug and remove the battery and put again.  I still can't get the volume slider to work!  I can go in the audio mixer and volume control, but it would be nice to make it work again.  I had this problem with the original operating system (Vista) and have upgraded to 7 Ultimate and it still continues.

    I found the solution me!... I installed the software of quick launch (because it isn't a Windows 7 post yet, my old OS is Vista Home) and it worked!  My volume slider works, as it did before!

  • Firefox 5 does not work with the AVG and Google toolbar, among other problems

    I downloaded Firefox 5, invited by Filehippo. Among other things, my anti-virus sw were not compatible, the Google toolbar disappeared and could not be put back because I was using an old browser! I did a system restore with the result that Firefox did not work at all. I went back to version 4, only because a guardian program requires firefox, otherwise I'd returned to Windows Explorer. It cost me a lot of valuable time.
    I tried to make this complaint under the feedback, and the button send didn't work.

    Google must update the program toolbar for Firefox 5.0.

    The 7.1.20110512W version Google toolbar works in Firefox 5.0 using the add-on Compatibility Reporter, I tried it myself because of the large number of comments on the problems of the GTB.

    https://addons.Mozilla.org/en-us/Firefox/addon/add-on-compatibility-reporter/

  • Site intertwined for Acrobat 9 Standard API does not work with Acrobat Pro XI

    Y at - it a new version of the API work intertwined for integration with Acrobat Pro XI

    After speaking with the support of the autonomy, I discovered that they do not yet support Acrobat XI.  The new API will be available in 1-2 months for integration between Acrobat XI and Interwoven innocuous.

  • Does not work with a calendar and design - data

    I downloaded the demo of master cs5 and installed. When I open the Flash Catalyst, I am not able to open the timelines Panel and design-data, it is reduced at the bottom of the workspace, but there is no way to open it by clicking it, or by dragging the gray bar Manager. Even the menu calendar is disabled.

    I post a screenshot of the problem.

    catalyst.jpg

    Hey!

    Double click on each tab (or data design time timelines) should open for you.

    Nothing is activated in the menu of a calendar at the time of your capture screen, is because your project currently contains no States/pages, or any selectable items.

    If you select State 1, and then click 'Duplicate State' of the timeline become active and develops.

    Let me know if the work above for you, and if you have any other questions about the timeline.

    Thanks for posting!

    Tara

  • iPhoto 1.2 does not work with El Capitan and 'Help' pages ignored by Apple!

    Update to Apple iPhoto with El Capitan on a MacBook Pro is a disaster: it is a completely new version with NO INSTRUCTIONS! It is impossible to edit uploaded photos, events seems to have totally disappeared and the news of 'Help' are a joke. Also, Apple do not answer questions, such as this, put online.

    It must be a solution or inline instruction manual, but where is it please!  Thank you very much!

    Photos for Mac is not an iPhoto update, it is a completely different application.  You open iPhoto libraries in Photos, but the photo library will turn it into albums iPhoto events, because there is no events.  Photos creates rather Moments based on the date and place, and they are created automatically.

    Take a look at the online help: Help the Photos

    And also: How Photos handles content and metadata for iPhoto and Aperture - Apple Support

    You can continue to use iPhoto.  9.6.1 iPhoto works well on El Capitan.

    The EL Capitan upgrade uninstall not iPhoto. Open the Applications folder and drag iPhoto to the dock.  If the icon is blocked, try updating to iPhoto 9.6.1:

    If you have a version of the AppStore in iPhoto, you can try updating iPhoto to 9.6.1 iPhoto as described by Barney:

    https://discussions.Apple.com/docs/doc-8431

  • I bought a Panasonic camcorder, software as HD WriterLE1.1 discovered it does not work with XP pro any other software I can use?

    Panasonic HD HC-V100 software HD Writer 1.1

    XP had around HD video.

    Unless you have a XP spec machine' really good ed, I doubt that it will work well with the hd video that record you.

    You can buy all sorts of editing programs, such as adobe first elements, which will work on a XP computer, but even once, I insist on your pc have enough power to edit HD video.

    You can download a 30 day trial version, if do and see.

    If you are not going to the release of the video in HD, so you're going to make a dvd SD, you can convert HD to SD video, and then edit, using movie maker.

    To get the video from the camera to the pc, use a card reader and place the cam card and simply copy the video files.

  • Why nikon view nx2 does not work with El Capitan, and what can be done to remedy this?

    Why software nikon transfer 2 no longer work after upgrading my operating system of El Capitan iMac?

    Get in touch w/Nikon tech support and ask them.

  • Re: Satellite L300D-13s - WiFi does not work with Vista

    I have a L300D-13s that came with Visa Home Premium on it.

    His work very well outside the wireless that refuses to work.
    I always "Wireless Association failed because Windows did not receive response from the access point or wireless router.

    The wiresless is a Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
    I am running the latest version of the BIOS and the 6.1148.924.2008 drivers dated 2008-09-24. If I use the latest drivers on the RealTek site, I get a message about an unknown error.

    If I use the NETWORK Ethernet card, then he gets a fine IP address so this isn't the show indicator to publish.
    Its not wireless security (I understand that Vista does not support WEP 128 bit). I turned off and it still does.

    Other laptops running XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux.
    If the problem obviously lies with Vista and/or the drivers.

    If someone has solved this.

    And no - don't tell me to go out and buy a router "Vista compatible".
    If Vista does not work with router XP and other operating systems compatible with Vista is wrong.

    Hello

    > Other portable XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux. If the problem obviously lies with Vista and/or the drivers.
    I would say it is not a Vista problem or a Realtek driver problem because I have a Vista and Realtek WLan card and I can connect properly to my router.
    In you case, I would say that there is a compatibility problem between the router and the Vista because as you said the laptop can connect properly using Linux.

    I have goggled a bit and could solve most of the people who have had this issue, update the firmware on the router s.

    Maybe you should try that too.

  • Satellite A300 - built-in Chicony webcam does not work with Win Live Messenger

    Hello

    I just bought a * Satellite A300-1MC * (works on Vista Home Premium) and downloaded Windows Live Mail and Live Messenger.
    The integrated webcam does not work with Live Messenger; and when you select the tool, Audi + Vieo Setup in Messenger I get thye following message: "we are unable to launch the Audi video installation.
    The webcam works fine with the Camera Assistant Software.

    I tried: 1) killing the AC software and from Messenger. (2) dowanloading one driver webcam Toshiba Web site; (3) update of Windows Vista
    None of the above works.
    Any suggestion received with joy...
    Thomas

    You can try to install the CAM such as ManyCams software - http://www.manycam.com/
    Basically, the program to access your webcam video and redistribute it as a video device ManyCam.

    Richard S.

  • My webcam does not work with live chat

    Original title: webcam problem

    my webcam does not work with live chat and it happened last time specially when the computer do the update of rutin and I used to restore my computer to bring it back to the work of the web camera

    Thank you

    Hello

    ·         What is the brand and model of the webcam?

    ·         You're using a built-in or external webcam?

    Method 1:

    Try to run the Microsoft fixit from the link tool and check if it helps.

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 2:

    I suggest updating the drivers of webcam on the manufacturer's Web site, click on the link below:

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  • WinHTTP.dll does not work with TLS 1.1 and TLS 1.2

    We cannot send https requests to our payment processors using windows 7 with winhttp.dll or msxml6.dll because it is not support TLS 1.1 and TLS 1.2

    on Windows 7 and windows 2008 R2 server I have the same version of winHTTP.dll 6.1.7601.17514;

    winHTTP.dll version 6.1.7601.17514 does not work with TLS1.1 and TLS 1.2

    WindowsServer 8.1 and windows 2012 I have winHTTP.dll version 6.2.9200.16451
    winHTTP.dll version 6.2.9200.16451 works well

    Here is a sample of my test code:
    Set obj = CreateObject ("WinHttp.WinHttpRequest.5.1")
    obj. Open "COMPUTER", "https://www.paymnt.com/".
    obj. SetTimeouts 30000, 60000, 60000, 60000
    obj. SetRequestHeader 'Content-Type', ' application/x-www-formulaires-urlencoded.
    obj. Option (6) = false ' disable redirects
    obj. Option (9) = 512' force TLS 1.1 - error
    "obj. Option (9) = 2048' force TLS 1.2 - error

    How can we improve the winhttp.dll version or msxml6.dll in windows 7 to work with TLS 1.1 and TLS 1.2?

    This is the e eprint screen with winHTTP.dll version 6.1.7601.17514

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • SideWinder X 4 does not work with my computer

    Original title; SideWinder X 4

    I can confirm that the keyboard works with other computers, but the keyboard does not work with your computer and with which I intend to use it. The keyboard works in the BIOS and turn on until at halfway through the Windows startup animation and then turns off and unresponsive. I have the drivers installed on the site, but the keyboard does not work, and Device Manager reports the missing pilot. The problem told to install a driver, but this utility is unable to find a driver.

    Steps to try to solve this problem, I took:
    Uninstall, reinstall
    Keyboard to use free software (still doesn't)
    Install the version 8.x from the site
    Any suggestions?
    Configuration:
    Windows 7 Professional 64-bit with the latest windows updates
    Intel Core i7 860 2.8 GHz
    8 GB RAM
    EVGA Nvidia GTX 460

    Hello

    Put the computer to boot and check which application third party is added to the element start and the origin of the problem:

    http://support.Microsoft.com/kb/929135

    Note: follow step 7 to restore the computer to a normal startup.

  • Windows Media Player 12 volume up-down does not work with the mouse scrolling

    Windows media high-low Player volume does not work with mouse scroll... why?

    It is a simple function just add this option... plse something... wish...

    Hello

    I suggest you submit your feedback using the link below.

    http://mymfe.Microsoft.com/Windows%207/feedback.aspx?formid=195

Maybe you are looking for