Volume Touch button light

Similar Questions

• Z570 - no touch button lights, can not hibernate

  I've had my z570 for about 6 months now, and all is well until now. Except today, when I started and a few seconds once windows had started, the lights on the touch buttons (volume, speed fan etc.) on top came out. Tried rebooting but after a few seconds, it's the same thing. They still work, and the power button is still on. Of course, this isn't a major problem, but I don't worry because it wasn't a particularly good laptop market, and I go to the University in 2 days.

  Also, I tried to put the laptop into hibernation last night. The screen went as usual, but after about 10 minutes the power button / stop and tactile buttons were still on, hard drive and the fan still runs. Had to force the laptop turned off with the power button which I never do.

  These things could be related? They are signs of a more serious problem? Thanks in advance

  Will be

  Have you tried a key recovery? Follow these steps
  1 backup all DAT files in c drive
  2. close the laptop
  3. press the small button with the arrow pointing down next to the switch to turn on laptop. It would start as usual.
  4. He would show that windows is loading files. It would then start in the recovery environment.
  5. click on a key recovery
  6a selected then press and the initial backup.
  He would show 2 warning messages. Then he would start.
  Before doing so, try restoring the system to a restore point before the problem arised. If System Restore work, then do a key recovery. If it does not then no onekeyrecovery.
  Onekeyrecovery would be your laptop factory reset, removing all the data in the c drive
  CAUTION:-If you have changed the size of the partition then onekey custom more.

• Satellite A660: Comment and a question about button lighting / mute

  Note:

  Hi, I'm the proud owner of a satellite A660-166 (3 days) and I installed everything from scratch on the win 7 pro because I got my laptop with a home (need pro for work) version... I met some problems, but this forum really answered my questions :) Never found such a useful for technical support forum. I wanted to express my gratitude and my support for everything you do for users :)

  Problem: well, this isn't really a problem, more a curiosity... I had a few problems with the key eco, at this time there button lighting / mute was to mute... Thank you guys, I found out what needed to be done, I reinstalled the Flash card software and everything worked properly more the lighting button / mute has been for enlightenment now. I have nothing against that, I prefer it like this, but I wonder how to change that... I found some response on the use of toshiba wireless Assistant and the illumination tab... Because my laptop is fairly new, that I do not have a tab of enlightenment, I was wondering how to change the mute button if I want to?

  Thanks, keep up the good work!

  It's nice to hear that you found answers to your questions here. Many people here trying to help.

  Back to your question: it is not easy to give a precise answer and I really put t know if you can change the settings of a single button. I think it has something to do with the registry entries, but how to change, that's another question.

  If you use this button for lighting ON / OFF, you can use FN + ESC for the mute button so you have two options that can be used with a touch or quick key combination.
  Can you please test and confirm that it works correctly?

• Equium A300D - 16 c touch sensitive light does not illuminate

  I have a 16 c on Windows Vista Edition A300D Home premium and touch sensitive lights used to light up when I press the first button to turn on, but the lights work again simply not always where I want the equium inside sign should illuminate.

  Thank you

  Hello Jonny

  These buttons are controlled by the Toshiba button support utility and this utility is part of the package of added value. To be honest I don't know if there is way to toggle buttons features, but if you want you can try to follow:

  Remove the system pre-installed VAP (Control Panel > programs and features), restart the computer and install the last PPV for your laptop model Toshiba Support page under http://eu.computers.toshiba-europe.com > support & downloads.

  Please let me know if everything works well again.

• Touch (buttons) does not not on HP pavilion DV7

  Hello I'm new here. I just bought a HP pavilion DV7 laptop 1285dx of entertainment 5 days ago, and the touch buttons for volume, mute, play, pause, before, back buttons and WiFi stop working. They never really seem to work perfectly. kind of hit and miss and the scroll of volume would be a little crazy. They don't quite work now and I was wondering if there could be something that I could try before I return the laptop to Best Buy? Again, what are the tactile buttons between the keyboard and screen. Any help would be appreciated.

  Hi Esteban1976.  I think I found the solution (at least this is what finally worked for me).

  Follow these steps:

  1 shutdown the computer laptop completely (not in standby or Hibernate).

  2. unplug the power adapter AC laptop.

  3 remove the battery from the laptop.

  4. press on and hold down, the button for 30 seconds.

  5. replace the battery, plug in the adapter and turn on the laptop.

  HP says that these actions will remove all capacitive and static charges in the laptop.

  He has worked both times that I had the problem.

  Don't know exactly why it worked, but I guess it's because the tactile buttons have registers of memory who associated with them that becomes insensitive (or closed) due to static charge/discharge of 'touch' and do not lose their charge until all energy sources have been removed, and the circuit to ground out.

  Let me know if this worked for you also.

• dv9260nr volume high/low lights don't light up

  I have recently upgraded to windows 8, then 8.1 pro, now the volume up/down lights do not work, the muted light works.  I can change the volume up/down work that just the lights do not work.

  I have the pc hp pavilion dv9260nr laptop.

  Hi Bakerdmw,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion Notebook dv9260nr and volume buttons does not.  Here's a solution.
  Try to open Device Manager by pressing the Windows key + X, clicking Control Panel, clicking system and Maintenance, then clicking Manager.In Device Device Manager, look for the network adapter, and then double-click the device name. Click on the driver tab, then click on set to update driver. Reboot the laptop.

  I hope this helps.

  Thank you.

• Hello, bright on top of keyboard touch-buttons no longer work.

  I have a Pavilion dv7-3065dx notebook.  With windows 7.

  The lit touch buttons near the screen (in accordance with the power button) on top of keyboard without function longer. As well as the light for the numbers pad.

  I have no idea why these buttons no longer work.

  Please help, thanks.

  First uninstall Hp Qucik buttons launch the program and features in the control panel and restart you Notebook and check if new drivers are installing and the buttons work correctly.

  If the problem exists then connect to www.Hp.com and click on support and drivers and enter the product number and click search and then select software and drivers down load and select your operating system and then click driver - keyboard, mouse and input (6) devices , and then click the HP Quick Launch Buttons ►2010 / 04 / 09, Version: 6.50.16.1, 26.05 M and click donwload and install on nb and check if the problem is resolved, and if the problem exists , and then click Start > Search > the Device Manager and in Device Manager > mice and other pointing device and uninstall the Synaptics ps2 device and restart laptop and check if the buttons work properly, if the problem exists and then contact the Hp Support to set up the bench event for laptop

  Please select the button "Accept as Solution" on the post that answers your question better. In addition, you can select the 'Congratulations' button on any post helpful to give this person a quick thank you.

• Touch buttons on my Qosmio G50/04j stopped working

  Hello

  I have a small problem that I see is common for new Toshiba laptops, my touch buttons on the top of my keyboard on my laptop stopped working.
  I am slot than Vista Home 64 bit.

  I tried to reinstall the value Toshiba add as suggested in another thread, but that doesn't seem to work.
  I also tried to uninstall Toshiba to re - install (reboot) (Reboot) value without any result.
  Fn keys still work very well.

  I don't know when the problem occurred, I only had the phone for a little over a month and I was installing some software, so obviously something has developed bad there.

  Does anyone else have any other suggestions? Other than reinstalling the OS?

  Thank you

  Holger

  Hello
  Go into the BIOS and check the
  Front control panel
  must be enabled

• Touchpad can connect to the PC, after the boot USB power and volume-up button top

  My Touchpad can connect through port USB of PC Web - OS is functioning OK, but when I reboot the Touchpad mode USB the PC recognizes it as a "Palm", but cannot load drivers and why it does not appear in 'my computer '.

  You try to run the webOS doctor? This is the first time, or he worked before?

  Here is my help file standard for doctoring a touchpad:

  How to doctor an HP TouchPad (reflash the ROM)
  
  On your Touchpad, make sure you have:
  
  USB cable.
  The battery is charged at least 30%.
  
  Computer:
  
  Windows 7, Windows XP, Windows Vista
  USB port available (not a hub or a secondary port).
  Java 1.5 or later version is installed. If you are not sure what version of Java, you have, or even if Java is installed, go to www.java.com and click the Do I have Java? link to install the latest version of Java.
  210MB of storage space.
  Connection to the Internet.
  
  Various information:
  
  The update process will take about 15 minutes.
  During this process, your device will be unavailable for use.
  
  Download webOS Doctor
  
  Download webOS Doctor on your desktop. If you have a profile of webOS, get it from http://ws.hpwebos.com/webosdoctor/sorry.htm
  
  If not, check the webOS Internals page: http://www.webos-internals.org/wiki/Webos_Doctor_Versions
  
  Prepare your TouchPad update
  
  Hold the Power button for a few seconds until a menu.
  Press on stop to turn your unit off completely.
  
  WebOS Doctor running
  
  Double-click on the downloaded file to start webOS Doctor.
  Follow the directions on the screen until you are prompted to connect your device.
  Select the language that you have selected on your device and click Next.
  Confirm your choice of language.
  Click on accept to accept the terms of use.
  Click Next. webOS Doctor checks your system. BE PATIENT! I saw this part take a few minutes to complete.
  After webOS doctor ends your control system, you will be asked to connect your device.
  
  Connect your device and the finishing of the webOS Doctor update
  
  Connect your device to your computer via the USB cable. You must connect your device directly to your computer, not through a USB hub or other intermediate device.
  Now the tricky part. Hold the Volume Up button on the device and insert the USB cable. After the USB great symbol appears on the screen, release the Volume button upward. If you see the HP logo instead of the large USB symbol, can the Volume Up button is released prematurely. If this happens, wait for your device to start, stop your device and then repeat step 2.
  Windows identifies your component and may offer to install two different drivers.
  When asked to install the drivers of OMAP, choose no not at the moment.
  When asked to install the drivers for Palm Novacom (liner), select Yes, and then leave the drivers to install. This can take some time. Once the drivers have been installed, the next button will become available in webOS Doctor.
  Click Next.
  Do not disconnect your device from the computer during the update process.
  When the reset is complete screen, click done.
  Wait a few minutes for your device to reset.
  You're done!
  
  WyreNut

• digital touch button

  Hello

  We are 2 Apple Watch. and we want to send the stickers and share our heart rate but find Apple Watch digital touch button .my was able to find. but my friend can find me.

  Please help me

  Thank you

  HI - try the following steps, which can also help address other issues:

  • In the Contacts application on your iPhone:
    • Verify that you have set up a contact card for your friend and it contains their iPhone phone number and email address Apple ID.
    • Check that your own contact card contains your phone number iPhone and Apple ID email address.
  • Check that you have added your friend to the friends list on your Apple Watch:
    • On your iPhone, in the application of the Watch: Watch My > friends.
    • To add more friends: friends list > add friend > tap someone in the contacts list.
  • On your iPhone and Apple Watch, remove old iMessage conversations with your friend:
    • iPhone: app Messages > swipe to the left on a message thread > delete.
    • View: Open the Messages app (from the home screen, which is accessible by pressing the digital Crown) > swipe to the left on a message thread > tap on Trash / delete.
  • Set new conversations of Messages from your iPhone phone number:
    • iPhone: settings > Messages > Send and receive > scroll to start new Conversations of > choose your iPhone phone number.
  • Check the email addresses to which you can be reached via iMessage:
    • iPhone: settings > Messages > Send and receive > under you are reachable by iMessage to > allow email address Apple ID (with a scale) (do not enable others who are not only yours).
  • On your iPhone in the app Watch: Watch My > general > reset > press reset sync data:
    • You won't see anything happen after pressing it (the process runs in the background, invisible to the user).
    • Wait a minute or two, so that the data of contacts up to date on your watch.
  • Disable and re-enable iMessage on your iPhone:
    • iPhone > settings > iMessage > enable/disable / enable again.
  • Restart your iPhone and your watch (turn the two together off the coast, then restart your iPhone first):
    • To turn off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off. To restart: press and hold the side button until you see the logo.
  • To send a Digital Touch:
    • Press the side button on your watch > choose your friend (turn the digital Crown and then press the icon or image in the middle of the screen) > tap the digital touch (finger pointing).
    • Send a sketch (drawing on the screen with your finger), a tap (tap the screen once or more) or your heart rate (place two fingers on the screen until you see and feel your heart rate).

  More information:

  Use the touch-Apple Support

• HP Pavilion Notebook PC g6: MUTE button light order 10 Windows Installer of workstation

  Post install Windows 10 working stopped button light MUTE. Button still works, just does not shine.

  I saw old Questions and answer to this anomaly, but for different models and Audio Drivers (Realtek HD Audio install).

  I think this model has ' AMD high definition Audio Device ".

  Can someone please advise what downloads are required REC Daniel this anomaly.

  Tri finally got.

  RELOADED "IDT High Definition Audio CODEC" according to HP Forum questions / answers below.

  http://h30434.www3.HP.com/T5/notebook-audio/no-sound-after-update-to-Windows-10/TD-p/5437738

  Thank you

• Re: Qosmio F50 - 12 L - Touch buttons do not work

  Hello

  My Touch button cell phone doesn't work and I don t know why.

  I have Toshiba Qosmio F50 - 12L.
  Please help me

  Hello

  I have a Qosmio F50 too and it s really a great book. The design is nice and this laptop really fast.

  On my Qosmio F50 I can t notice a problem with the buttons of the illumination. So maybe you have installed a software application that isn't compatible with the software.
  In your case, I would try to reinstall the Toshiba value added Package. It controls the keys FN, illuminating buttons and all the other special function keys:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?

  Last but not least, let me give you a little advice: Please read this helpful thread on the problems with the buttons of enlightenment:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165724𨝜

• Satellite A300-14s feather touch button does not

  Hello

  I installed VMWare player on my satellite A300-14 running Windows Vista 32-bit. But after the installation, my pen touch buttons (esp. enlightenment and CD/DVD) has stopped working.
  Then I uninstalled it but still the problem persists.

  I don't have any system point before the installation of restore.

  What should I do?

  Thank you.

  Hello

  You must reinstall the VAP (value added package) for Vista.
  Usually, this should help.

  PS: Clean the BONES and the front register of insatlling the VAP. You can use CCleaner for that...

  Welcome them

• Volume up button does not work like the shutter of the camera

  I have an iPhone 5 with iOS 9.2.1 (13D 15). The volume up button does not work on it like a camera shutter. I think that it used for, and iPhone to my wife 6 with the same iOS version works fine. It is a problem, because I am using this phone with a stick of selfie, which triggers photos by simulating the volume press up button, so it doesn't work at all for me. The physical button works - I can control the volume with her settings. And when I try to use the stick selfie, I get the volume until the display on the phone, so I can see that the signal of the selfie stick is received correctly by the phone. And the stick of selfie works with my other phone that is not a problem with the volume up button.

  Work began after restarting the phone. So it's a bug to Apple report, the solution is to reboot the phone.

• Satellite P745 - touch buttons do not work

  The touch buttons above the keyboard for media on my Toshiba Satellite P745 series controls and shortcut keys do not work.

  Any solution for this?

  N

  At a first try reinstalling additional package from Toshiba and verify functionality.

  Post comments.