Vostro 1000 Audio in the problems section

Similar Questions

• When I add a video on my calendar, it allows only the audio, not the video. It is in MOV format.

  I'm working on my first project with elements first, and when I add a video to my computer, it will add it only for audio, not the film section. All my files are in MOV format. I am able to open the same file in Microsoft Movie Maker, but not in the first of the elements.

  geigerlau

  Your specifications video camera and your lack of QuickTime presets, it's almost a certainty that the installation of the first Elements needed as QuickTime will solve your problem.

  What could be your problem is the use of a video codec MotionJPEG for your video. Your camera seems to offer MotionJPEG video codec, but only as an .avi file. The video codec that goes with the file from your camera .mov is H.264. Thus, with an extension of the .mov file, you do not have the question common to Premiere Elements MotionJPEG any version.

  Please let us know if the installation of QuickTime works for you. It should based on what I've read online on your camera and knowing the requirement of Premiere Elements for QuickTime.

  Thank you.

  RTA

• With media player, I get audio but no video. What is the problem?

  Whether it's a wvm file or not, I get a black screen with audio only.

  Hi newbewon1

  1. you try to play a WMV file?
  2. what operating system is installed on the computer?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  For resolution, please refer to the procedure below and identify what codec was used to compress the file. You must install the codec even on the computer to read the file. There is no absolute way to do that, but here are your best options:

  ·          To determine what codec was used with a specific file, play the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On the file tab, look at the Audio codec and Video codec sections.

  ·          Use a non-Microsoft codec identification tool. Many are available on the Internet.

  So you can check if the installation using the correct codec solve you the problem. You can use your favorite search engine to download and install the codec. Refer to the below help links -.

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  http://www.Microsoft.com/downloads/en/default.aspx

  http://support.Microsoft.com/kb/316992

  NOTE- Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps.

• Inspiron 17r - 5720 problems audio - static, hum, during playback of any audio and the sound of the speaker rear

  Hi, I got my laptop for less than a week and there are several problems with the audio. When no matter what audio is supposed to play, only a static noise comes from loudspeakers. This happens when the music plays, or when a sound system is supposed to play.

  Occasionally when I start the computer, the rear speaker makes a wooshing, a static sound (like a TV white noise) and will continue when I open programs.

  Hello. Unplug the power cable from the computer and listen on the batteries. If the audio improve, then you have a problem of material known with this model.

  The problem is documented in the FAQ Audio Choppy/jump. Look in the section for model Inspiron 7720 and 5720.

  Hello, Zohaib_R welcome on the portable Audio discussion Forum. Feel free to browse the FAQ portable Audio.

• Dell Vostro 1510 Audio has stopped working after the update of Windows Vista.

  Nice day!

  My computer (vostro 1510) began to revolt recently and I wonder if you could help me with this.

  Basically, last week I was talking to my friend on Skype when suddenly my computer restarted due to the update of Windows (I have Windows Vista Business 32-bit). After he turned his back, I realized that there is no audio from the speakers. I tried using headphones but still - no sound.

  Immediately, I went to the 'Sounds' menu and checked if my speakers were still 'active '. They have been.
  Next thing I decided to do was to reinstall the Realtek audio driver, however, did not help or the other. Since then, I tried to reinstall several times but, unfortunately, everything remained the same.

  Then, I thought that maybe something was wrong with my hardware, however, audio spent ALL Dell diagnostics audio tests (so my hardware is very good, yes?). I also tried "System Restore" option and returned to the point before the update... Nothing has changed!

  In addition, as far as I know, all the audio settings in Windows (checked in Registry Editor) are OK.

  What should I do now? My last hope is to completely reinstall the system, however, I decided to contact you first.

  Thanks in advance!

  Solved the problem by reinstalling the operating system.

  Thank you!

• 9.2 Organization repeat audio to fill after empty sections of the audio in the timeline panel. No work around? I'm on a MacPro to 2014.

  Just noticed this problem with empty sections of the audio in the timeline panel. 9.2 organization wants to fill then with audio of the previous element rather than let their silence when it is rendered. No work around for this bug?

  Hello

  On Mac, you can export via SOUL with sequences of import in native mode. Alternatively, you can export directly from Premiere Pro. It should be resolved. You can also export with a "Virgin" audio section where you have gaps.

  This is a known issue that we should have fixed in our next update. Sorry for the problem.

  Thank you

  Kevin

• Dropped audio at the end of one. File VOB (problem with the import. VOBs, I guess)

  Here's what I did. I created several DVDs by recording VHS videos for them. I copied these DVD on my PC, giving me dozens of DVD files with. VOB files in them. I imported the. VOB files for each DVD in Premiere Pro sequences, but still get (which means that every time) dropped audio since the last images of each. VOB file in the sequence. So, in between all of them. VOB file in a video DVD full, there is a very brief break in audio. To be exact, the audio is 'cut' last 13 executives of each. VOB. However, the start of the next. VOB in the sequence begins with the audio as it should (at the very 1st picture). Video is not cut at the end of each. VOB and usually the transitions in the next. VOB smoothly, with no problems. However, occasionally, the latest image of one. VOB looks "glitched" (imagine two sequential images overlapping each other, but within a framework... so that you can see two of the same person who overlap who move from the 1st to the 2nd section). When this happens, the start of the next. VOB file in the sequence is largely pixelated for the first 2 or 3 images.

  I guess it's a problem with the import of first Pro CC. VOB files (she just can't handle.) VOBs). I would like to know if anyone has had a similar problem, and if you have found a solution.

  It is a long-standing problem.  Here's my work around.

  http://www.videohelp.com/software/XviD4PSP

  (Download version 5, not 7.)

  

• When I access internet, there is about a band of two inches across my screen, below the toolbar that does not respond to my mouse. Where is the section that don't meet pluse I connect on Facebook, but the problem is on every Web page.

  For example, on the Firefox help page, my mouse cannot select options in the blue section at the top of the page.

  The extension of the Yahoo! toolbar reported that causes this problem.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Fighting the problem of Audio Equalizer

  So I got my laptop about 2 weeks ago, there is no problem, until about the last week when I opened the Manager tab LISTENING EXPERIENCE, and his Beats Audio was missing some things. But a few days before then, I was using it and it was working fine, and now is not. The bars do nothing no more.

  Here is a picture of my equalizer

  

  Touchsmart HP ENVY (ENERGY STAR) m6-n015dx

  Running WINDOWS at 08:32 bits

  Under the guarantee

  Hello

  Try to use Recovery Manager to reinstall your driver Realtek HD Audio original as this will reinstall also the interface Audio Beats - the procedure to use to reinstall Recovery Manager the drivers and the software is detailed in the document at the link below.

  Recovery Manager - Windows 8.

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• IDT - Audio - IDT High Definition Audio CODEC-updated, problems with the audio

  I recently installed successfully IDT - Audio - IDT High Definition Audio CODEC and after that none of my audio worked. Everything indicates that the audio is working as usual, but no sound. Also, when I did a test "sound" in the control panel > sound, it is said "the test could not be played. (Translated from Finnish Windows Vista, but anyway). I went to IDT Audio settings (from the bottom right icon) and noticed that my headphones and speakers had been cut so I removed the 'secret' of these two, but nothing happened. I tried to restart the computer several times and recheck the IDT Audio settings but nothing found which could cause the problem.

  Hey Andyy27,

  My HP Support Assistant tried to make me update this driver I have the computer in mid-August.  Same thing; whenever I have install the driver, there is no sound either - I have not known what you mentioned above on the sound slowly disappears.  Thahaseena, good to have you hear.  I am running Windows 7 family on a HP Pavilion dv6 Notebook PC.  After installation, there is no request to restart or stop to install updates; my sound card lists an error and I have to roll back the driver to make it work again.

  My driver date is January 13, 2010, version 6.10.6265.0.  It's one that I continue to back and it works.  I will install the update now and tell you what I get for audio driver is not working.

  The properties of my IDT HD Audio CODEC says:

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  You must restart your computer before the changes made to this device will come into force.

  New driver that disables my sound: June 17, 2010, version 6.10.6289.0.  Well now, it asks me to restart, but I'm not having good hope... will write if this time it solves the problem (4th time charm?).

• error message: "no audio output device is installed" I have no sound - how to rectify the problem please?

  reinstall audio devices-error message: "no audio output device is installed" I have no sound - how to rectify the problem please? tried most of the quick fix ideas, but nothing seems to work

  Hi Jammyhorse,

  1. What is the number of brand and model of the PC?

  2. when the problem started?

  3. you remember to make changes to the computer before this problem?

  Step 1:

  You can check the following link and run the Fixit and see if helps solve the problem.

  Diagnose and automatically repair audio playback problems

  http://support.Microsoft.com/mats/NO_SOUND/

  Also check out the link:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Step 2:

  In the BIOS settings advanced, you can also check if the onboard sound is enabled.

  You can see the manual of the system manufacturer or contact the system manufacturer for more information on how to make the changes in the BIOS.

  Note: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Keep having to disable and reactivate my IDT High Definition Audio CODEC, what's the problem?

  Hello!

  I have a Pavilion Touchsmart Sleekbook 14 "with Windows 8, I bought the news about 7 months ago. I have not yet updated to Windows 8. 1.

  Recently, I noticed that my audio suddenly stops working. This happens usually when my computer has been asleep and I start it again. No sound through headphones or loudspeakers when I plug them in. I have not tried external speakers, but I imagine that the result would be the same.

  If I go into my device manager and disable and re-enable the IDT High Definition Audio CODEC the sound comes back. All the audio devices I have listed are associated with this IDT High Definition Audio. I tried to update the drivers, but he informs me that the most up-to-date drivers is already installed.

  I'm not entirely sure what causes this problem, but I remember to install a HP Windows Update or a while back about IDT High Definition Audio. I think it's an optional update.

  EDIT: after doing some more research, it looks like it is related to that Windows update and compatibility of their audio driver IDT with Windows 8 or 8.1 does not look very good. If all else fails I'll try to uninstall the IDT CODEC all together and use default HP audio.

  Someone at - he found a solution that works for them in this regard?

  Thanks Viktoria, thank you for spreading the word

  If you can mark my post on this topic with an acceptable Solution and Bravo, it help me and will allow the post to appear more frequently on research conducted on the Internet. Providing congratulations to my other posts about the issue would help a lot

  As I said, I will change my guide to troubleshooting on the issue soon (probably in the next day or two). There is no more sense to have the fix for a problem with crazy

  Mario

• The ADMA00 interface driver has a problem; No audio or the sound of the computer

  * Original title: no sound in Windows 7

  device of reading levels ok but no sound. problem ADMA00 driver interface has a problem. its supposed to be fixed. I have no sound

  Hello

  Please contact Microsoft Community.

  I understand that you are faced with the question on the sound.

  I will definitely help you with this.

  Please provide the information below.

  1. What is the exact error message you are getting?

  2. don't you make changes to the pc before that?

  3. how many time you are faced with this?

  I suggest you go through the below methods:

  Method 1: Try running the Sound Troubleshooter:

  1. Press Windows + R key.

  2. Type command and press ENTER.

  3. Click on troubleshooting.

  4. In the left pane, click View all.

  5. In the list, double-click the audio playback and run the troubleshooter.

  Method 2: Try the clean boot:

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in 8.1 of Windows, Windows 8, Windows 7, or Windows Vista. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Also check out the link below and check if it helps:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• Problem with no audio on the use of the Webcam.

  My webcam has no audio, any ideas what the problem may be?

  Hello

  Please answer these questions to get more clarity on this issue.

  -Don't you make changes to the computer before this problem?

  -Is the specific issue of webcam?

  This problem may occur because of software or hardware issues. This problem may also occur due to corrupted drivers or broken and missing updates.

  This tutorial can help you identify and resolve its current problems in Windows, including no sound from your speakers or headphones.

  No sound in Windows: http://windows.microsoft.com/en-us/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  You can also try using a different application with webcam and check if there is sound on this request.

  Response with the State of the question and we will be happy to offer you our help.

• No sound from computer troubleshooting returns the message: "device driver IDT high definition audio CODEC driver problem.

  I can't get any sound from the computer.  Worked, but quit when I tried to watch a UTube video several hours
  After leaving the computer.  While troubleshooting, AutoCorrect could not solve the problem of the message
  has received "device driver IDT high definition audio CODEC driver problem.   I have the Windows 7 operating system.

  Hello Sharon,

  When you say "AutoCorrect" do you mean this:

  http://windows.microsoft.com/en-IN/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1 ?

  If not, or you are looking for a driver try, here's one from Sony. Note that you may need to run in compatibility mode (with the right button on the file (or its icon on the desktop), select Properties, select the compatibility of the top row): http://download.cnet.com/AR5-Drivers-zip/3000-2108_4-180025.html .

  Let me know if one of them fixes the problem for you.

  Kind regards

  BearPup