The ADMA00 interface driver has a problem; No audio or the sound of the computer

Similar Questions

• Error message: CD-ROM DRIVER has a PROBLEM when inserting disk on the new laptop.

  Original title: CD-ROM DRIVE

  tried my new laptop by inserting a disc in the CD-ROM drive and the message... CD-ROM DRIVER has a PROBLEM, I clicked on fix of the problem and still nothing.what can do to solve this problem? This is a brand new laptop

  Hi kempie2011,

  1. What is the number of brand and model of the laptop?

  2. you receive error codes?

  I suggest you try the fix it from the link given below and check if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Also read the following article:

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I get the message that the NVIDIA graphics driver has a problem

  maintenance cleaning disc

  get the message that the NVIDIA graphics driver has a problem

  Hello

  I suggest you uninstall the drivers from the Device Manager and software programs and features Nvidia.

  1. on start and then click Control Panel.
  2. click on system and Maintenance, click System, and then click Device Manager.
  Note: If the control panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  1. in Device Manager, look for graphics card, right-click, and then click on uninstall.
  If you are unable to locate it, then go to view, then select 'show hidden devices '.
  2. When you are prompted to confirm that you want to remove the device, click OK.
  3. restart the computer.
  After the computer restarts, the drivers will be installed automatically. Check if it works very well.

  If this is the case, update the drivers from windows update.
  See also:

  I suggest update you also the drivers and check.

  Update of the hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest you to contact NVIDIA support and check.

  http://www.nvidia.com/object/windows_7_overview.html

• I can't print because my Lexmark x 422 driver has a problem, where can I get this driver?

  I don't know why it's not working, but it does not leave my wireless printer works

  Hello
  You failed to mention which version of the Windows operating system you are using. You will need to do, is go to the Lexmark support site and search for your printer. Once you find it, you should see a section for drivers and downloads. You'll want to choose one that is which version of Windows you have.

  This should dissipate any printing problems you have.

  I hope this helps. Just reply to the results.

• Cannot connect the Olympus camera to transfer pictures to the computer with 10 and 31 error codes

  Original title: Codes error Windows 7 31 and 10

  Trying to get my photos on my camera (Olympus) on the computer using the USB cable.  Error report getting is the USB mass storage device driver has a problem.  Device cannot start (10) Port_ #0007.Hub_ #0001 C:\Windows\system\Drivers\vwifimp.sys also microsoft virtual wifi miniport adapter code 31 error.

  Have tried to uninstall the device in Device Manager and the system hangs when the computer is restarted.

  Disabled people of Microsoft virtual wifi miniport adapter.

  Have you tried to update drivers using windows update and it said that all updates are up-to-date.

  Have tried troubleshooting and not fixed.

  Have you tried Mr fix it and not fixed.

  Hello

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. What is the camera Olympus model number?

  3. other USB devices work properly with the computer?

  4 that Mr. Fix it you try?

  I suggest you to connect the Olympus camera to another USB port and check with the question.

  Also try to connect to another computer and see if that fixes the problem.

  According to the error codes, you must Access the site of Olympus and install the drivers updated to the Windows 7 operating system.

  Follow the links below:

  Method 1:

  I suggest you to run the tool and troubleshooting hardware devices and check with the question:

  Open the hardware and devices Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 2:

   

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Method 3:

   

  Also, download and install the latest Chipset drivers from the website of Olympus, since they also include drivers for USB.

   

   

  Update the drivers from the Olympus website by typing the model number:

  http://www.olympusamerica.com/cpg_section/cpg_downloads.asp

   

  For reference:

   

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers:

  http://support.Microsoft.com/kb/943104

   

  For more information:

   

  Contact Olympus Support:

  http://www.olympusamerica.com/cpg_section/cpg_consumercontact.asp

   

  I hope this helps.

• Pavilion 17: Problem of closure for the Intel Management Interface driver

  I solved a problem of closing roll back driver version 11 IMEI to version 9.  The latest updates of Windows 10 installed driver version 11 IMEI but installation back roll in Device Manager is greyed out.   I downloaded IMEI driver version 9 but the exe file will not open and install.  Can anyone help please?

  Hello

  Try the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

  When windows has reloaded, download the driver directly from Intel IMEI on the following link, unzip the and run the installer.

  https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-nu...

  Once the installation is complete, restart the laptop.

  When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

  Kind regards

  DP - K

• Local disk C has the least space, where the Local D drive has much more space: problem is drive C starts instead of because...

  I had to reinstall XP. Before reinstallation, D drive was the drive started on my computer and I have not had any problems with space. Obviously I screwed up letting it keep the partitioned drive or what I had to do at some point, because after reinstalling XP C drive the drive that begins (C has no space and D wants everything as before). Now, I don't have enough space to download programs, I need to work from. In fact, I don't have enough room to do anything! C drive only has 7. something GB on it compared with with 30 0r 32 GB!

  How can I get the D drive and do what is now drive C? Alternatively, I can change somehow D drive where all downloads to go and work from there anyway? I don't know how to change where a download will. Can someone please help me out here because I'm way behind with work; cannot afford professional maintenance COMP.; and have no idea what to do.

  Hello

  You may need to back up important data on the computer and and then format the D; drive to remove all the installation files and creates the disk space.

  Also I suggest you perform a disk cleanup on the computer. To get the procedure you can refer: Description of the tool in Windows XP Disk Cleanup: http://support.microsoft.com/kb/310312

  And uninstall unwanted computer programs, see: remove programs you don't need more: http://www.microsoft.com/windowsxp/using/setup/maintain/removeprog.mspx

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Signature of the problem:
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: PCI\VEN_10DE & DEV_0428 & SUBSYS_110B1734 & REV_A1
  Configure the class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
  PnP problem code: 0000002B
  Driver name: nvlddmkm.sys
  Driver version: 8.17.13.142
  Driver date: 15/05/2012
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033

  Hi, Senga,

  Start > right click on computer

  Select manage

  Click on continue in the UAC window

  Click on Device Manager

  Click on the + sign next to the device

  Right click on driver and select rollback

  If the cancellation is dimmed, select uninstall

  Close Device Manager

  Back to zero computer and Windows will reinstall the driver

  Go to the manufacturer website, download the updated driver to update and save it to the desktop

  Double-click the .exe file to install

  You can also try booting in safe mode with network.  Download the following tool and run a scan complete to rule out malware.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

• My cd/dvd drive has disappeared. All trying to solve the problems of the code 19 appears. How can I get the cd/dvd drive F?

  my cd/dvd drive has stopped working.  He said after a repair code 19.  How to restore the drive?

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• [Solved] HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device.

  Recently, I noticed that my CD/DVD stopped working. He turns, but nothing happens; the disc is not read.
  I use Windows 7 Home Premium 64 - bit on an HP Touchsmart tx2z.

  I ran the Microsoft FixIt program through http://support.microsoft.com/kb/982116 and it has identified the following problem: 'HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device. »

  However, FixIt said that he was unable to solve the problem and discs are still read.

  I manually uninstalled the driver in Device Manager and then scanned for the hardware changes. The driver was reinstalled, but with the same problems as before.

  Any ideas?

  Thank you!

  Also, try following the steps for Windows Vista, which should also work in Windows 7, in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• I'm unable to connect the Sony Walkman to my PC, receive error message WPD Enhanced peripheral of storage drive has a past problem cannot start [code 10].

  Original title: drive WPD Enhanced password storage has a problem cannot start [code 10]

  I tried to uninstall and install but nothing works I'm unable to connect my sony walkmann more

  It does not charge or sync with the device.

  apears there is a problem with the password for the improved wpd storage disk

  Hello
  1 did you change on your computer before this problem?
  2. What is the model of the Sony walkman?
  3. what happens when you load the device?
  4. What is the brand and model of the computer?
  WPD (Windows Mobile) devices allows computers to communicate with attached and peripheral storage media. WPD offer a flexible and robust way to computers communicate with readers of music, storage devices, mobile phones, cameras, and many other types of connected devices.
  Check if the device works fine on another computer.
  You can also follow the steps in the article mentioned below:
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104
  Post your answer for you help in this matter.

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• A driver for my CD drive has been disabled. How to identify the driver and solve the problem?

  Lately, I have not been able to use my CD-ROM drive. When I put a disc in, the player starts to turn, but Windows does not recognize the disc. When I navigate to the CD-ROM drive in the Explorer, a message appears telling me "Please insert a disk into drive D:." When I look at the properties of the device, I get the following device status:

  A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32)

  Click Troubleshoot to start the troubleshooter for this device.

  Trouble shooting steps me to uninstall and reinstall the device, but this has no effect - the drive still does not work.

  I am running Windows XP Professional. My CD drive is a LG CRD - 8482B CD-ROM. The driver files are:

  CDROM.sys
  GEARAspiWDM.sys
  IMAPI.sys
  PxHelp20.sys
  Redbook.sys
  c:\windows\system32\storprop.dll

  Does anyone have a solution?

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 31.

  Signature of the problem

  Additional information about the problem

  Hello

  1. Once you get this error?

  2 have you made changes on the computer before this problem?

  3. which device is causing the problem?

  Code 31: This device does not work properly because Windows cannot load the drivers required for this device.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the Fixit from Microsoft Fixit article and if that helps.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Update the driver and check if that helps.

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  For more information, see the following Microsoft article.

  The hunt for drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardware

  Hope the information is useful.

• What is a Teredo Tunneling Interface Pseudso has a disk problem and can I fix it?

  My Windows 7 was freezing after I let it idle for a while. I have to do a hard reboot. Recently, I noticed that I had Dell support help agent and Dell update on my computer but I did not the it. They have been installed at the time my warranty missed. A forum said they had the same problem and the problem stopped after uninstalling them. It did for me too, for about two days but I'm back to freezing.

  Another forum says run diagnostics from the manufacturer. I did and I received two error messages. One was 0F00133C and the other was 0F001332 MAG DRIVE - request BIOCIC interrupt (IRO) has not indicated in time. At this point, the computer froze and wouldn't it be fun to just try again. Once again a forum said it was a sign of a dead hard drive.

  Just now under system and security of the Control Panel, I had Pseudso - Interface Teredo Runneling has a disk problem and hardware problem cannot have been detected.

  This computer can be solved without costing a fortune. They said I should also have other problems with a hard to die, but I did not. Would appreciate any help.

  Hello

  Thank you for giving us the opportunity to help you.

  I suggest you try the step provided by Nithyananda J replied on March 27, 2010 in the thread mentioned below. The steps helped a lot of people facing the issue with Teredo Tunneling Pseudso-Interface. Hope this will help you too.

  Teredo Tunneling Pseudo-Interface this device cannot start. (Code 10)

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards