Dirt problems

Similar Questions

• I have a problem loading with my iPad Air2.  I used other cables and Chargers but still doesn't load.  I plugged the iPad to iTunes and a DFU after he took a few hours that the iPad has been completely restored and apps reloaded.  In addition to the

  My iPad will not normally charge.  I tried different cables and Chargers.  I plugged the iPad to iTunes and reset a DFU.  After only a few hours the iPad finished reloading all software and reloaded new apps, it had also charged the battery but the problem remains, I still can't load the iPad normally.  Any help out there?

  There are very few things that keep loading an iPad. Some of these (other charger plugged into a good outlet, different cable) you have already tried. Others are:

  1 dirt, lint or fuzz in the port of loading of the charger or the iPad. Check and clean carefully if necessary.

  2. a software failure. Reset the iPad. Press and hold the Home button and the sleep/wake button until the Apple logo appears. Then release the button and let the appliance restarts. You lose no data by doing this. It's like a restart of the computer.

  3. failure. Make an appointment at an Apple store to have a technician look at your device. Or contact the Apple Support.

• Problem with the microphone, I can record voices, but nobody hears me

  While talking with my iphone, the person on the other line is not able to hear my voice well, but I can hear them perfectly, this problem occurs when I talk with my sim card while talking with FaceTime or WhatsApp or speaking with Siri I can hear and speak without problems, and also there is no problem in voice recording. And also it is no problem if I respond with my MacBook.

  I was wondering what could be the problem!

  P.S:I also tried to call with EarPods and it did not work, and reset network setting did not work!

  You have 3 microphones in your phone, all assigned to different applications. It is likely that your main microphone (at the bottom of the phone) is defective or has dirt stuck in port.

  Are you able to record a voice memo?

• Error 90 b - cooling fan problem

  Hello

  A few days ago I started getting message, with a cooling fan problem, error 90 b

  But this error was only occurring when I started my laptop after 5-6 hours

  I mean when I started this morning, at the first moment it showed this error, and when it will stop automatically (it says, ENTER to continue starting or it will stop in 10 or 15 seconds) and then I start it again, but this time, no error started end

  So guyz, I wanted to know whether hardware or software problem or something else

  Still my warranty period which goes, so should I goto HP support center?

  I'm on HP Pavilion dv6

  It is material but may be repairable before you send it. Bend over a paperclip and stick it through the grid to hold the fan and prevent it from running out of control and blow compressed air in the grid to dislodge any dirt or dust that can be hung up the fan. If it does not the fan may need to be replaced.

• Solutions to the problem of CD/DVD drive cannot read DVD discs

  This article will tell you 3 ways to solve the problem of the CD/DVD drive do not read the DVD disc. Please the process step by step.

  Solution1. Clean the DVD disc

  If your Player cannot detect the DVD disc, the first thing you need to do is to clean the DVD disc. Use a soft and dry cloth (not painted) to wipe the disc from the center of the disc to the edge. Please take care to not to use a paper to clean the disc with a circular motion, it will scratch the disc.

  After cleaning, inert the DVD on the drive to see if it works, if the reader can't read the disc, use a cloth of cotton wet with water or alcohol to clean the disc. After the disc dry, inert re the disc on the drive. If the reader can read, the operation is complete. If this isn't the case, please turn to the option2.

  Option2. Check the disc to see if it has been damaged

  Draw the DVD from the drive and check if there are some scratches or small cracks on the disc. If the disc is damaged, please try another DVD disc to see if the drive can read. If the drive cannot recognize the new disk, there could be a problem with the CD/DVD drive. Please turn to solution 3.

  Solution3. Clean or repair the CD/DVD drive

  When a CD/DVD drive has been used for a long time, its ability to play disc will only get worse. Then, the reader can not read some discs, or blocking your computer in the middle of the reading disc. This is usually due to the aging of certain parts of the disc, CD/DVD player dirty.

  Open the drive to check if the DVD reader accumulates dust and dirt, if so, the cold air from the hair dryer allows you to clean the inside of the DVD drive. Be sure to not blow on the optical sensor orally, or clean it with a cloth of cotton with water or alcohol. After cleaning, insert a DVD disc on the drive to see if it works. If still no, you need to call the s command customer service or take the reader to a computer repair shop.

  Post edited by: Newhampshireguy

  Thanks for sharing your experience with us!
  I think your assignment might be useful to others here in the community.

• Problem with start

  Hello! I'm new to the forum and I have a serious problem with my laptop, it's the starup my pc keeps everyone to suddenly stop and the message that appears tells me that it's supposedly overheating and there I tried to remove the battery and work directly on the sector, but the problem is still not resolved. Who can help me to quickly solve the problem? Thank you
  PC brand: HP G72

  Hi, start screen display 30 b error?  If so, it should be associated with fan. You will need to check the fan - something that doesn't work don't as appropriate no - dust-dirts or sth captured inside fan... Thank you!

• Satellite P200 - 1 K 9 - dirt inside the LCD screen

  Hello

  I have a problem with my screen, it works fine, but there seems to be a specification of the dirt of somekind inside the screen, it is not dead pixels because you can see them when the screen is off. another poster commented on this problem, but the response was not very helpful. any suggestions?

  And yes my warranty ran out. the laptop is a P200 - 1 K 9, about 3 years now and it is very annoying. about a dozen small spots around my screen, they look almost like chips little plastric, nothing more than 5 mm long, and in different directions. This laptop has never been anywhere except in and around my house.

  I put t know what kind of suggestions you want to read here.
  If you want to clean screen must be disassembled, cleaned and put together.

  Either ask the service to do this on the professional track and for costs or try to do it on your own including risk of damaging something.

  Out of curiosity, what kind of answers you have before?

• A key on keyboard on Satellite L100 problem

  Bought my L100 Satellite in July last year. Problem is that I need a lot more pressure to press the key 'a' all the others. How can I fix?

  Can I get the keyboard to check why it is almost blocked? I had no problem when I bought this laptop.

  If you remove all of the keyboard you will lose the warranty and I would not risk the guarantee because of the unique keyboard key.

  But you can remove the unique key of the keyboard Plug and check if there is dirt or something else with a bad influence for the key mechanism.

  For a replacement keyboard, you will need to contact the service partner in your country? ¦

• dust behind the screen LCD - common problem?

  Hi, I recently bought a toshiba EQUIUM A60-181, and I'm
  facing a problem with the LCD screen.
  There seems to be a defect or the dirt behind the glass
  because it blocks the light of a pixel. Any attempt of
  apply moderate pressure to move this filth that has failed. I was
  I was wondering if it is common with screens LCD expect a sort
  I can't believe that this has passed quality of imperfection
  control. Have I not justification for firing
  toshiba for fixing, it is barely 1 week old?
  I have read the warranty booklet and there is no mention of
  dead pixel return policy can you elaborate on what is
  and what is not covered by the warranty?

  see you soon,

  Richard.

  Hello

  In my opinion, you should contact the Service partner. You have purchased a new product and if you see that there is something wrong, you can contact them. I'm sure that the technicians can give you more information on this issue.

• Overheating problem on my Equium A60

  Hi all

  I've posted a few more heating problems, a few months ago I've followed the instructions and cleaned the areas necessary, but the problem persists
  I ve downloaded a program that monitors the temperature of the different aspects of your machine, as HHD and CPU
  He claims that my CPU critical temp rises to 105, but it never reaches above 86 before his stop

  Anyone know if this problem is caused by the synchronization of heat or something like that being broken and no one knows everything good free programs that help manage your CPU and keep it cool?

  Has anyone else had this problem or something similar?

  Thanks in advance

  Jake

  Hello

  All portable Toshiba have preinstalled power management software.
  This application run by the processor and the use of cooling.
  Usually, this app works perfectly and controls many options like the processing speed of the CPU, cooling method, turn off settings, etc.

  If you laptop will stop because of overheating problems, so there must be something wrong with the cooling module. I guess that it doesn t work full implementation.
  I can't give you an exactly the answer why it is not working properly, but usually dust and dirt inside the laptop is responsible for the failure. But if this problem persists after cleaning if the cooling module has a failure.

  In this case, the only way to solve this problem is to contact the service of Toshiba. It can check the module.

• I have problem after cleaning LCD on my SP U200

  Hello

  I have the following problem with my U200. I regularly clean my monitor with LCD cleaner foam. But due to some reason, the foam has penetrated the monitor, seems to be between the trubrit and LCD. Because of the experience, I think that it wasn't my fault.

  For me is the sealing between the trubright and LCD that have the problem. Now, the monitor has some dirt that is to say that the froth evaporates.
  The guys at Toshiba insist it's my fault.
  Anyone before this show with its monitor? What has been your Toshiba service center approach?

  Best regards
  Pantelis

  Hello Pantelis

  Please don't be crazy on me, but I believe also that it is your fault and you can't call for replacement of view covered by the warranty. I cleaned the LCDs much over the past 7 years and I never noticed anything like that. I really can't imagine how much liquid you used to clean the LCD screen.

  It must be done very carefully and the liquid should be administered as necessary. Sorry, but I see no solution here. Maybe the LCD disassembly and cleaning can help. Try to talk to the technicians.

• Satellite P30 turn off - also problems with burning DVDs

  Hi Please help me.
  I had a row with my brother and it won't help.

  My Pc is only a year old and it turns off. I would say it was because of overheating, but he just did and it isn't really that hot.
  I put on the books, not on my knees, keep him away heat, crash back to the desktop.
  It makes me crazy, please, any help or advice or anything like that would be a great help.

  I also have problems with my dvd burner, always, he gets to about 17% and said that there is a mistake, thought it was the discs but surely it can be all 100 of them, I tried turning on and off but no use.
  Also the advice would be great!

  Please help a girl in need of a working Pc! Who does not know a lot of technical stuff!

  Hello

  Overheating problems usually occur because the cooling module cannot work properly.
  Fans are unable to work because of the dirt and dust inside the laptop.
  The best way to clear the fans is to use the vacuum cleaner.

  On the problems of DVD writer: well, it's not easy to say why it happens. Have you checked media dvd from different manufacturers? Many CD/DVD media works differently, and you should check it out.
  In addition, there is a problem with the burning software. I put t know what application you're using, but you should try to use Nero. It's very nice software and I m very happy. Check it out

• Qosmio F50 - light screen problems

  I bought my Qosmio F50 less then one year in Croatia. The first day I turned it on I already have problems.

  When the laptop has been marketing, before the BIOS startup screen, lines and weird models appeared on the screen and computer laptop itself blocked, then restarted.
  This is is spent every 4 - 5 times I turned it on, sometimes during restart also.

  Also when I had a black wallpaper, in the middle of the screen we saw as if the screen was dirty, lines that are on the screen that are not dirt or anything else you can clean.

  Finally, after some time, I sent the laptop to the service and they said that the graphics card had gone wrong. Then they replaced. I also mentioned on the lines of "dirt" that can be seen when a darker background was on the screen. They replaced the graphics card, but they said nothing on the lines of "dirt" on the screen.

  Now, a week, I have problems with the screen. Brightness of the screen is going crazy, for example when I'm on the web, the screen becomes a little darker and brighter and darker and brighter, and it goes like this very quickly. And it does that when I surf the web. Sometimes when I watch a film or do anything.

  Its amazing, the Qosmio gives me so much trouble.

  When I sent my laptop last time to the service provider in Croatia, they were extremely rude and they have not solved all my problems. They also said that the graphics card gone bad because of the improper use of the laptop, due to overheating or so. But this is not correct since the first time after I bought the laptop and turned on the lines before the BIOS screen appears.

  I have returned the laptop the next day, but I did not. Now that I have problems with the brightness of the screen going crazy I'm not sure what to do.

  Any suggestions would be welcome.

  Thank you.

  > Now that I have problems with the brightness of the screen going crazy I'm not sure what to do.

  Well, I think you should contact the technician of the ASP again and should explain your problem and should say that this behavior strange screen still persists and that it has not been resolved in the first attempt.

  One of my friends owns a Qosmio F50 (don t know exactly the model number) and he is very satisfied. It of really a large notebook supporting many different multimedia functions and he didn t notice graphics problems or screen.

  As I said above; get in touch with the ASP to get the verified material.

• New Satellite A350 - dirt inside the LCD screen

  Someone at - experienced this kind of problem? The laptop is new (bought today). "Dirt" covers about 5 pixels (it is not regular) and looks like a gray shadow. Unfortunately, it is placed in a very bad place get my attention: /.

  I am sure that these aren't the dead/stuck pixels because I can see it even if the laptop is turned off. To be 100% sure, I did a picture of this 'anomaly' and when I Zoom I see that the pixels work correctly but there is a grey "smudge" above them. I want to download the pictures, but I left my cable somewhere elese.

  Can someone tell me if it is covered by the warranty or would I meet problems if I ask for a panel replacement for laptop / LCD monitor?

  Thanks in advance for answers!

  Post edited by: JustDidIt

  I agree with Akuma.
  If something like this happens it is certainly covered by the warranty and authorized maintainer can help you with this.
  Addresses and phone numbers, you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  Good luck!

• Satellite Pro A40 inside cleaning due to overheating problems

  Hi Forum,
  I want to clean my Satellite Pro A40 carefully inside due to overheating problems.

  Can someone provide me with a sort of manual how to open the SPA40 correctly resp. How to clean it.

  I think that indoor air to blow a few tablets will not solve the problem, there is a lot of dirt and dust inside.

  IWant to do myself, so please do not recommend you speak to a technical expert.

  Thanxx in advance...

  Hello

  > I want to do it myself, so please don't recommend me to contact a technical specialist.

  In my own opinion, generally it s not a bad suggestion if some advises to contact a technician for laptop to a radiator cleaning because the dismantling of most of the computers mobile new generation is very delicate and not easy. Mostly one or the other has no experience and in this case, it is best contact an ASP to help him try to clean the laptop and probably damage parts.
  If the warranty is valid such procedure will void the warranty

  But don t worry buddy ;) I'll try to help you as much as I can
  I have goggled a bit and found it nice [statement | http://www.irisvista.com/tech/laptops/ToshibaA45/Satellite-A45-remove-hinges-1.htm] how to disassemble the Satellite A45.
  The A45 is very similar to the A40 and so pictures of the laptop must be the same.

  Step 4 (photo) and step 5 shows the dirty radiator and how to remove it.
  You do not need to disassemble the laptop full but only the radiator at the bottom of the unit cover.

  Notes; Always be careful and don't use force to remove anything ;) and you know everything you do are at your own risk

  I hope I could help. Best regards and Merry Christmas ;)

  Good bye