Vostro V131 using the Microphone via the headset.

Hello

I wonder if I can use my mic (3.5 mm jack) via the headphone jack of my Vosto V131.

According to the German site, the V131 has a "combi" and a technician confirmed, too.
But he told me that I should ask in the forums.

But I have not found a way to make it work.
The "Dell Audio" driver only detects the microphone in the headphones and I have not found anything useful in the Internet.
And of course not only another device is listed in the menu "sound"and I can not change anything in the "Speaker".

BTW, I found something interesting:
If start "Dell Audio", then the Windos Soundmenu musicplayback quality changes as I have to switch between the playback and recording.

Im looking forward to your answers
Best regards, Chris

Buschwald
According to the German site, the V131 has a "combi" and a technician confirmed, too.

That is right. the Jack is designed to be used with headphones iphone like that.

Note that the decision-making has 4 segments that is not the standard configuration. If you want to use a standard microphone with it, you need an adapter, something like this:

http://www.Amazon.com/headset-buddy-Smartphone-computer-BlackBerry/DP/B002SK66OY

Tags: Dell Laptop

Similar Questions

  • Problems of transfer/answering a call when using the headset with 79XX phone - CSCun26289

    Hello

    Runing on CUCM 8.6.2 and preparing an upgrade to v9, we have recently updated our IP phone firmware.

    We use the 79xx series. We have updated the firmware to * SCCP41.9 - 3-1 SR 4 - 1 s *

    We are now facing a very strange problem that is referenced in the bug below.

    When you use the helmet our users cannot transfer an ongoing call or answer a call when ther is already active.

    There seems to be a fix in 1.0000 ES27

    Does anyone know where this fixed version?

    https://Tools.Cisco.com/bugsearch/bug/CSCun26289

    See you soon,.

    Olivier

    9.4 (2) Firmware was released Friday. There is no release notes for this version, but in tests, it seems that the bug has been squashed.

    GTG

  • Satellite U400-11U - no sound when using the headset

    Hello world.

    get a Toshiba Satellite U400 (u400-11u) with Vista installed and on first use all nice work and I have never tried the headphones, but after sometimes, when I put on the headphones Jack connector there no sound only when I put on the plug connector, the speaker works.

    I learn that I have to update my BIOS and I did: no solution, there is no sound, so I change to XP SP3 some problem and now I'm with Windows 7 with a few problems.
    So if you have information about this problem, please give'it for me!

    I tried all of the solutions in the FAQ, but no way!

    PS: Sorry for the mistakes of language!

    Have you tried to test with another helmet? Maybe your neadphones's MUTE switch. Please check this box.
    Sorry, but it is not easy to say what the problem is here.

  • I can't use the microphone in my headset for Skype and recording programs

    Hello...

    I can't use my microphone in my headset for Skype and recording programs.
    Can someone pls help? I tried the camera on my phone, it works perfectly.
    I use v8.00.03 (T) Edition Premiun.

    Post edited by: worldliner

    Sorry mate but could you be more specific?

    > I use v8.00.03 (T) Edition Premiun.
    What does that mean? Toshiba BT stack or what?

    There is a new BT stack:
    http://APS2.toshiba-tro.de/Bluetooth/?page=download-Toshiba
    Its v8.00.12

  • Toshiba 32DV502: is it possible to use speakers while the headset is connected

    Is it possible that the loudspeakers of the TV can be activated when you use headphones?
    I use the headset to get a sound in a stereo amp output but I want TV sound when the car radio is turned off.

    The only way it works is to unplug the cable from the headphones.
    The reaso for the use of the headphone output is so I can have a stereo sound during playback of a dvd.

    > Is it possible that the loudspeakers of the TV can be activated when you use headphones?
    No, I don't think that this is possible.

  • Do not hear sound on the speakers of the laptop when the headset is connected

    Hello, I have laptop Alienware14 with windows 7. I hear the sound very well on the speakers of the laptop, but when I plug my headphones, I can't get sound in the headphones and not on the speakers of the laptop. For example, I want to be able to use the headset to talk to people (like Skype) while listening to music in the speakers of the laptop in the game I play. My old laptop Inspiron does that very well, but it won't. Any suggestions on this... a framework that I did put right or something?

    Thanks for any help you can give me!

    Laptops that have its IDT have a framework for "Helmet of Communications". Which allows communication as Skype through the helmet, while the regular audio continues through the speakers.

    However the 14 Alienware has audio Realtek who doesn't have this feature, I think.

  • 10 that the headset does not deal with blackBerry

    My new Passport this problem

    The helmet does not. Answer phone calls on a channel, but it does not work for music, videos and applications of x-rays

    The headphones supplied with the Passport works on blackberry 9900

    Someone had this problem? Any suggestions? Thank you

    Dear,
    I've analyzed all the functions of the passport and one of them is configured with the ATS (TTS), serve as a teletype. What is very interesting. But to turn this off, the helmet worked perfectly. In other words, if configured for teletype, makes no sense to use the headset. Will be? Was configuration. Could not be the software because the passport version is 10.3.0.908.

  • How to get sound from the speaker, while the headset is inserted into the laptop?

    In my laptop 15-E034tx Hp - Pavilion, I used the headset. While disconnecting the headset, the headset was broken. And headphones Jack of 3.5 mm of endpoint kept inside the laptop. You cut the wire. Only the tip of the helmet is inside the laptop. Now the speaker does not work because of this problem. If the headphone out only the speaker will work. Now, I want to how to disable the headset using software or Windows operating system?

    You should check the sound setting and depends on your sound card.

  • My computer (win 7) does not detect the new lx1000 lifechat headset. Cannot use the microphone while I am on Skype.

    My computer (win 7) does not detect the new headset.

    Cannot use the microphone while I am on Skype.
    I Can hear music, but I can't record any sound, for the most part the microphone does not work as it should. (Which is terrible for a MS product)
    Can not see the device on the list of Audio material.
    Help?
    Thanks in advance
     
    Original title: lx1000 lifechat

    Not sure, but maybe - http://support.microsoft.com/kb/935748/en-gb

    It will be useful.

  • What BT dongle to activate the microphone with Bluetooth headset?

    Hello

    I recently bought a Bluetooth headset stereo with microphone so that I can use it to make calls from Skype (VoIP) through my Dell Inspiron laptop with factory Toshiba Bluetooth stack.

    I could pair and connection between my laptop and the headset (Plantronics 590 A), but can not get the microphone to work. I spoke with the helmet provider who said the following:

    If your computer has generated in Blue Tooth, it must support audio handsfree and A2DP profile. How you can find out is to go to start, programs, accessories, entertainment, select sound recorder, change, audio properties, and he has to say under sound, playback and sound recording or high quality BT or BT stereo if it's not you, it will take a dongle that supports the profiles of school boards.

    Mine said 'wave of Toshiba Bluetooth".

    They said that they could not recommend third party products. Therefore, I would be very grateful if someone could tell me what kind of Dongle that I need to solve this problem and ideally suggest where I could get one of (I'm in the United Kingdom). Thank you very much.

    Dewi.

    You should take a look at the following Web site. It should solve your problem:

    http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/FAQ.html
    "Why my microphone work?

  • How to use an external microphone, using the speakers (like using external speaker?)?

    I'm trying to use the microphone to an external webcam (logitech C200), which is connected via USB to the laptop (vista, service pack 2). Now the broblem is that I managed to get the external speakers that are connected through the socket of the enclosure, BUT I can't for the life of do me use the microphone on the external webcam. He keeps trying to use the microphone internal cameras (those integrated) instead.

    I tried to disable the internal camera (which now allows me to use the webcam) and I even tried to disable the internal microphone, but who also disbaled speakers (includes those used through the socket).

    I'm at a TOTAL loss, how to solve this problem, I know you can do what I want, I just can't for the life of me get by.

    PLEASE HELP ME< any="" and="" all="" suggestions="" will="" be="" gladly="" accepted="" and="">

    THANK YOU FOR YOUR TIME AND THANKS FOR ANY HELP I RECEIVE!

    BJ!

    Try this:
    Go to control panel, double click sound. In the recording tab, you should see the icon of your microphone with a green check mark on the subject. If there is no checkmark, it means it is disabled. To activate the Microphone, right click on Microphone and click Activate. If you do not see the Microphone in the list, right click on the white space and select devices see the disabled. Then, you'd see the Microphone. However, if you don't see the green check mark on it, right-click on it and click Activate. And also to select Microphone and click the set as default below (if defined as default button is active).

    Now, set the microphone sensitivity level:

    1. Select Microphone and click the properties button.
    2. click the levels tab and adjust the slider to the right for 50 to 100% of its range.
    3. If the mute is enabled, click the button mute to reactivate the device.
    4. If the Microphone Boost is available, amplify the volume.
    5. click apply and then OK to make the changes.

    I hope I could help

  • Headphones without microphone... Using the internal one?

    The phone redirects the entries and exits to 3.5 mm when using a set of foot of headphones that can be a problem when you answer a call from standerd helmet obviosly don't have a built-in microphone. Y at - it an app (or plans to be implemented in the next update) which allows a way to manually use the microphone internal everything using a headset. I know that android uses PulseAudio for sound and a Linux power user know it can handle input/output switches and of same same time entry or exit, but I have yet to see an application that allows the configuration for this. If there is no apps so I can develop one but I'm inexperienced in Java (I use Python most of the time [probably could have write in A.S.E but then it can be distributed] and shell scripts) I'd be happy to release an app for that (without advertising), but as I said I don't know not java, so I can't do it any time soon.

    PS: Do Androids PulseAudio run in system or user mode?

    HM, I had a different experience.

    My car has a plug ' audio in '.  When I take my Droid in the car, I plug a standard audio jack in the Droid directly into my car's stereo system.  It plays music very well.  If I want to make or receive a call, the sound comes over the speakers, but I pick up the droid and speak into the microphone and it works like a charm.

    The same thing happens when I plug my old Bose headphones of reuglar.  No microphone on them, I mean just down the phone when the microphone is...

    Is it not what you've been through?

  • Record without using the audio microphone

    I want to record from a file without using themicraphone on my laptop Inspiron 15 7537.  He had instlled software Realtek but no option to use the IDT internal microphone or Audio CODEC so he picks up background noise which is not good.  When I try to save the only option it is the Realtek microphone.

    Can someone season solution

    Thank you

    dlb21a
    He had instlled software Realtek but no option to use the IDT internal microphone

    Hello. As you say, your laptop has audio Realtek so it is unclear what you mean by "Microphone internal IDT. Dell doesn't use audio Realtek so IDT in the same model of laptop.

    Here are some other ways to save in addition to using the built-in microphone.

    > External mic. Because the Inspiron 7537 only has a headphone jack, you can't use a regular computer microphone which would have a TRS plug, but instead, you must use a headset with a plug from SOCKET that looks like this:

    "Headphones" is the headphones with a microphone. You can also use a regular mic which has a TRS plug if you get an adapter to convert it to a plug from SOCKET. The adapter is called a "helmet buddy."

    > A usb microphone.

    > If you want to record a stereo signal, you can do that through your headphone socket because its entry is mono only. To save the stereo, you need an adapter usb audio with a "line-in" socket Don't get one that has only a mic jack because it will be only mono too.

    dlb21a
    I want to record from a file

    > If the file is already in your computer, you can internally record in the computer by selecting 'stereo mix' as default device in the recording of the sound Properties tab. If you do not see the stereo mix, right-click in the empty area of the tab to open the context menu and select "Show disabled devices". (You must have your installed Realtek audio driver).

  • Microphone does not work when the headset is connected (Windows 7 with Realtek HD Audio).

    I am a user in advance, but this got to be one of the funniest problems ever. First, I had 2 headphones with microphone.

    1. An old helmet specified with microphone
    2. A new headphones A4Tech HS-100 with microphone that I just bought
    Problem:
    • Using the new helmet I bought, when I plug the microphone (pink jack even) it works, but also when I plug in the headphones (same headphone jack), the microphone no longer works (cannot receive all the sounds, even if it is detected clear as already plugged) and only the work of helmet.
    The most funny thing is:
    • The old headset works fine when I plug the microphone (jack Pink) and headphones (headphones) to my ASUS N81V laptop.
    • When I plug the microphone on my laptop and plug the headphones to my iphone, the microphone and the headphones work!
    • To experiment more, my laptop has a HDMI output connected to an external HDMI monitor, when I connect the microphone on my laptop, only it works, but as soon as I connect the headphones to the headphone jack on the external HDMI monitor, the microphone works again!
    Things, I tried and does not work:
    • Maximize the microphone amp
    • Separate entry made in the audio Panel
    • Ensure the microphone is not dumb anywhere
    • Install the latest drivers from the manufacturer and realtek Web sites
    I want to get both my mic and headphones works when plugged the laptop, what exactly is the problem? Any help? Thank you very much.

    I have a similar problem with my netbook a built-in microphone running Windows Starter, that's how mine to get the fix:

    Control Panel - his - recording tab - click on Configure button - set up micro - Configuration of the Microphone Wizard.

    You'll see three choices 1. Headphones Microphone 2. Table microphone 3. Others.

    All what I have to do to fix my netbook is to select the desktop instead of headphones with Microphone Microphone (it has been revived somehow).

  • Im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected.

    Hi im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected. What should I do? Thank you

    Hello

     
    1. have you checked the problem by plugging the headset to another computer?
    2. it worked before?
    3. What are you talking about ""device"is not connected?
     
     
     
    I suggest you to connect to another computer and check.
    Also check if the device is compatible with Windows 7.
    Reference:
    Windows 7 Compatibility Center
    If it's compatible, perform the methods below
    If it is not compatible, see the following articles:
     
     
     
     
     
     
     
    Method 1: Run the audio Troubleshooter and see if it helps.
     
     
     
    Method 2:
    Run the Fixit described in the article and perform the steps:
    See also:
     
     
     
     
     
    I hope this helps.

Maybe you are looking for

  • How can I reopen it a tab that was a confirmation of a form (e-mail)?

    I accidentally closed a tab in which I had filled out a form to send an email and got the confirmation. I have opened the closed tab but it just open the page with the form. How can I get this back conformation? I really need and assume its could be

  • hard drive RMA

    Hello Primary hard drive Self test Quick test 01% full Hard drive 1 fast (303) Full test01% Complete Hard drive 1 full (305) Intelligent control Hard drive 1 SMART (301) It is apparent from the foregoing that I need to replace my Samsung portable pla

  • Downloads folder now organized as a library of music

    My Downloads folder now organizes all under the following headers, 'name' ' # ', 'Title', 'Album' "contribution...". "It is NOT a music library; It's my download folder. I want to see and to use the standard organizing features such as file name, dat

  • LAPTOP BLACK SCREEN

    EVS SONY notebook PC series turns on, but no display so that the lights are on, rotating fan and it turns off automatically after one minute. What can be the reason? How to solve this problem? Hoe to reset a motherboard?

  • InDesign cc 2015.4 - display settings

    In the display preferences default Performance is high quality, now, I have some fairly large images that can kill my machine seen high quality, when I change the typical and click ok out of preferences by default return of high quality.Is there a fi