VPN L2TP does not / / Android 4.4.3
My vpn connection does not work.
The installer is: L2TP/IPSec with PSK in my network private.
Given that my old phone (Xperia S), located on android 4.3.X, still works
I see no problem of configuration, but I guess that it is a problem with android 4.4.X
The same problem occurs on my sony tablet z since the update to 4.4.X
Is there any fix from sony?
I read on a google fix, that should be in place on the 4.4.4, version but updated for 4.4.4 on the
Tablet does not solve this problem.
We got a test account of another user with this issue and have found the cause of this. It will be fixed in a future software update.
Tags: Sony Phones
Similar Questions
-
Windows 7 64 bit ultimate - VPN L2TP does not
Hello
On a brand new with windows 7 64 bit ultimate laptop, I set up a VPN L2TP connection but it still fails with error 789.
On the same network, I have an XP machine that connects to the remote gateway even.
After a long search, here's what I did:
1. Add a Dword AssumeUDPEncapsulationContextOnSendRuleregistry in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\PolicyAgentand set it to 2 as shown in the MS KB - http://support.microsoft.com/kb/926179
2. set correctly the two political generation of IPSEC Agent & key services
3 reboot several times the PC
4. to pass the local gateway connecting directly to the ISP
Nothing works.
On the XP machine, it runs immediately without problem: same gateway, local gateway, remote and local network, access, etc...
Any help will be greatly welcome!
Thank you.
Have you tried to delete / create the VPN connection again?
-
Windows - Internet access, no split Tunnel L2TP VPN Clients does not
Greetings!
I have four ASA 5505 that I configured with 4 site to site VPN tunnels (works perfectly) to connect to our company facilities 4. The ASA is also configured with remote access L2TP/IPsec so that a specific group of users of portable computers can connect to and access to all facilities. It also works very well except for one important exception - my split tunnel setting doesn't seem to work, because I can't connect to the Internet outside the VPN resources.
I accept the inherent risk of allowing tunnels to split from a security point of view since I take the necessary steps to secure the systems used for remote access. I would appreciate any feedback on how to get the job of split tunnel.
Here is the configuration:
: Saved
:
ASA Version 1.0000 11
!
SGC hostname
domain somewhere.com
names of
COMMENTS COMMENTS LAN 192.168.2.0 name description
name 75.185.129.13 description of SGC - external INTERNAL ASA
name 172.22.0.0 description of SITE1-LAN Ohio management network
description of SITE2-LAN name 172.23.0.0 Lake Club Network
name 172.24.0.0 description of training3-LAN network Southwood
description of training3 - ASA 123.234.8.124 ASA Southwoods name
INTERNAL name 192.168.10.0 network Local INTERNAL description
description of name 192.168.11.0 INTERNAL - VPN VPN INTERNAL Clients
description of Apollo name 192.168.10.4 INTERNAL domain controller
description of DHD name 192.168.10.2 Access Point #1
description of GDO name 192.168.10.3 Access Point #2
description of Odyssey name 192.168.10.5 INTERNAL Test Server
CMS internal description INTERNAL ASA name 192.168.10.1
name 123.234.8.60 description of SITE1 - ASA ASA management Ohio
description of SITE2 - ASA 123.234.8.189 Lake Club ASA name
description of training3-VOICE name Southwood Voice Network 10.1.0.0
name 172.25.0.0 description of training3-WIFI wireless Southwood
!
interface Vlan1
nameif outside
security-level 0
IP address dhcp setroute
!
interface Vlan2
nameif INSIDE
security-level 100
255.255.255.0 SGC-internal IP address
!
interface Vlan3
nameif COMMENTS
security-level 50
IP 192.168.2.1 255.255.255.0
!
interface Ethernet0/0
Time Warner Cable description
!
interface Ethernet0/1
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/2
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/3
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/4
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/5
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/6
Description for Wireless AP Trunk Port
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/7
Description for Wireless AP Trunk Port
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
boot system Disk0: / asa821-11 - k8.bin
Disk0: / config.txt boot configuration
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS domain-lookup outside
INTERNAL DNS domain-lookup
DNS domain-lookup GUEST
DNS server-group DefaultDNS
Name-Server 4.2.2.2
domain somewhere.com
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
DM_INLINE_TCP_1 tcp service object-group
EQ port 3389 object
port-object eq www
EQ object of the https port
EQ smtp port object
the DM_INLINE_NETWORK_1 object-group network
network-object SITE1-LAN 255.255.0.0
network-object SITE2-LAN 255.255.0.0
network-object training3-LAN 255.255.0.0
object-group training3-GLOBAL network
Southwood description Global Network
network-object training3-LAN 255.255.0.0
network-object training3-VOICE 255.255.0.0
network-object training3-WIFI 255.255.0.0
DM_INLINE_TCP_2 tcp service object-group
EQ port 5900 object
EQ object Port 5901
object-group network INTERNAL GLOBAL
Description Global INTERNAL Network
network-object INTERNAL 255.255.255.0
network-object INTERNALLY-VPN 255.255.255.0
access-list outside_access note Pings allow
outside_access list extended access permit icmp any CMS-external host
access-list outside_access note that VNC for Camille
outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_2
access-list outside_access note INTERNAL Services
outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_1
DefaultRAGroup_splitTunnelAcl list standard access allowed INTERNAL 255.255.255.0
access-list sheep extended ip INTERNAL 255.255.255.0 allow INTERNAL VPN 255.255.255.0
access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
access-list extended sheep allowed ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
access-list INTERNAL-to-SITE1 extended permit ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
access-list INTERNAL-to-training3 extended permitted ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
access-list INTERNAL-to-SITE2 extended permit ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
no pager
Enable logging
exploitation forest asdm warnings
Debugging trace record
Outside 1500 MTU
MTU 1500 INTERNAL
MTU 1500 COMMENTS
192.168.11.1 mask - local 192.168.11.25 pool IN-HOUSE VPN IP 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 623.bin
enable ASDM history
ARP timeout 14400
Global 1 interface (outside)
(INTERNAL) NAT 0 access-list sheep
NAT (INTERNAL) 1 0.0.0.0 0.0.0.0
NAT (GUEST) 1 0.0.0.0 0.0.0.0
5900 5900 Camille netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
3389 3389 Apollo netmask 255.255.255.255 interface static tcp (INDOOR, outdoor)
public static tcp (INDOOR, outdoor) interface www Apollo www netmask 255.255.255.255
public static tcp (INDOOR, outdoor) interface https Apollo https netmask 255.255.255.255
public static tcp (INDOOR, outdoor) interface smtp smtp Apollo netmask 255.255.255.255
5901 puppy 5901 netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
Access-group outside_access in interface outside
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
RADIUS protocol AAA-server Apollo
Apollo (INTERNAL) AAA-server Apollo
Timeout 5
key *.
AAA authentication enable LOCAL console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
Enable http server
http 0.0.0.0 0.0.0.0 INTERNAL
http 0.0.0.0 0.0.0.0 COMMENTS
No snmp server location
No snmp Server contact
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
SYSTEM_DEFAULT_CRYPTO_MAP game 65535 dynamic-map crypto transform-set ESP-3DES-SHA TRANS_ESP_3DES_SHA
correspondence address 1 card crypto outside_map INTERNAL SITE1
card crypto outside_map 1 set of peer SITE1 - ASA
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
address for correspondence card crypto outside_map 2 INTERNAL training3
outside_map 2 peer training3 - ASA crypto card game
card crypto outside_map 2 game of transformation-ESP-3DES-SHA
address for correspondence outside_map 3 card crypto INTERNAL SITE2
game card crypto outside_map 3 peers SITE2 - ASA
card crypto outside_map 3 game of transformation-ESP-3DES-SHA
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
delimiter group @.
Telnet training3 - ASA 255.255.255.255 outside
Telnet SITE2 - ASA 255.255.255.255 outside
Telnet SITE1 - ASA 255.255.255.255 outside
Telnet 0.0.0.0 0.0.0.0 INTERNAL
Telnet 0.0.0.0 0.0.0.0 COMMENTS
Telnet timeout 60
SSH enable ibou
SSH training3 - ASA 255.255.255.255 outside
SSH SITE2 - ASA 255.255.255.255 outside
SSH SITE1 - ASA 255.255.255.255 outside
SSH 0.0.0.0 0.0.0.0 INTERNAL
SSH 0.0.0.0 0.0.0.0 COMMENTS
SSH timeout 60
Console timeout 0
access to the INTERNAL administration
Hello to tunnel L2TP 100
interface ID client DHCP-client to the outside
dhcpd dns 4.2.2.1 4.2.2.2
dhcpd ping_timeout 750
dhcpd outside auto_config
!
address INTERNAL 192.168.10.100 dhcpd - 192.168.10.200
dhcpd Apollo Odyssey interface INTERNAL dns
dhcpd somewhere.com domain INTERNAL interface
interface of dhcpd option 150 ip 10.1.1.40 INTERNAL
enable dhcpd INTERNAL
!
dhcpd address 192.168.2.100 - 192.168.2.200 COMMENTS
dhcpd dns 4.2.2.1 4.2.2.2 interface COMMENTS
enable dhcpd COMMENTS
!a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
NTP server 192.43.244.18 prefer external source
WebVPN
allow outside
CSD image disk0:/securedesktop-asa-3.4.2048.pkg
SVC disk0:/sslclient-win-1.1.4.179.pkg 1 image
SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 2 image
enable SVC
Group Policy DefaultRAGroup INTERNAL
attributes of Group Policy DefaultRAGroup
Server DNS 192.168.10.4 value
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.com
Group Policy DefaultWEBVPNGroup INTERNAL
attributes of Group Policy DefaultWEBVPNGroup
VPN-tunnel-Protocol webvpn
Group Policy DefaultL2LGroup INTERNAL
attributes of Group Policy DefaultL2LGroup
Protocol-tunnel-VPN IPSec l2tp ipsec
Group Policy DefaultACVPNGroup INTERNAL
attributes of Group Policy DefaultACVPNGroup
VPN-tunnel-Protocol svc
attributes of Group Policy DfltGrpPolicy
value of 192.168.10.4 DNS Server 4.2.2.2
VPN - 25 simultaneous connections
VPN-idle-timeout no
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.com
the value INTERNAL VPN address pools
chip-removal-disconnect disable card
WebVPN
SVC keepalive no
client of dpd-interval SVC no
dpd-interval SVC bridge no
value of customization DfltCustomization
attributes global-tunnel-group DefaultRAGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultRAGroup
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key *.
Disable ISAKMP keepalive
tunnel-group DefaultRAGroup ppp-attributes
No chap authentication
no authentication ms-chap-v1
ms-chap-v2 authentication
attributes global-tunnel-group DefaultWEBVPNGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultWEBVPNGroup
tunnel-group 123.234.8.60 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.60
pre-shared-key *.
tunnel-group 123.234.8.124 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.124
pre-shared-key *.
tunnel-group 123.234.8.189 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.189
pre-shared-key *.
type tunnel-group DefaultACVPNGroup remote access
attributes global-tunnel-group DefaultACVPNGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultACVPNGroup
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the http
inspect the they
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:423c807c0d63cb3e9aeceda977053f84
: end
ASDM image disk0: / asdm - 623.bin
ASDM location Camille 255.255.255.255 INTERNAL
ASDM location INTERNAL CGT-external 255.255.255.255
ASDM location INTERNAL SITE1-LAN 255.255.0.0
ASDM location INTERNAL SITE2-LAN 255.255.0.0
ASDM location INTERNAL training3-LAN 255.255.0.0
ASDM location INTERNAL training3 - ASA 255.255.255.255
ASDM location INTERNAL GDO 255.255.255.255
ASDM location INTERNAL SITE1 - ASA 255.255.255.255
ASDM location INTERNAL SITE2 - ASA 255.255.255.255
ASDM location INTERNAL training3-VOICE 255.255.0.0
ASDM location puppy 255.255.255.255 INTERNAL
enable ASDM historyI should also mention that my test clients are a combination of Windows XP, Windows 7, and Windows Mobile. Other that in specifying the preshared key and forcing L2TP/IPsec on the client side, the VPN settings on clients are the default settings with the help of MS-CHAP/MS-CHAPv2.
You must configure * intercept-dhcp enable * in your group strategy:
attributes of Group Policy DefaultRAGroup
attributes of Group Policy DefaultRAGroup
Server DNS 192.168.10.4 value
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.comIntercept-dhcp enable
-Latptop VPN clients (which I assume are on windows computers) is also the * use on remote network default gateway * box unchecked. It is located on the Advanced tab of VPN client TCP/IP properties. Select Client VPN > properties > Networking > TCP/IP Internet Protocol > properties > advanced and uncheck the box.
Alex
-
SonicWall VPN PIX - does not, could someone help?
Hi all
I'm trying to set up an a 506th PIX VPN tunnel (firmware 6.3 (2)), a firewall SonicWall Pro. It does not at the moment. Phase 1 is ok but the phase 2 is not, the VPN tunnel has not been established, and the security association is removed after a minute or two. I enclose below the PIX config and an attempt to create VPN tunnel debugging output (slightly modified and cut for reasons of confidentiality). The PIX already has other two VPN configured which work perfectly.
I would be very grateful to anyone who could help me answer the following questions about this VPN configuration:
1. to debug output, which means the next?
ISAKMP (0): retransmission of the phase 2 (0/0)... mess_id 0xafc08a94
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
2. in the config, I don't know if the 3 static controls are necessary and how it might interact... What do you think?
3. in what order things happen in the PIX when traffic is from the local network to remote network by VPN? What is NAT then treatment then setting up VPN to access list? or or treatment, then NAT and VPN to access list? or another possibility?
4. How can I get it work?
Thank you very much in advance for any help provided,
A.G.
########### NAMING #################################
vpnpix1 - is the local cisco PIX
remotevpnpeer - is the Sonicwall firewall remote
Intranet - is the local network behind PIX
remotevpnLAN - is the remote network behind the SonicWall
################ CONFIG #############################
6.3 (2) version PIX
interface ethernet0 10full
interface ethernet1 10full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
.../...
hostname vpnpix1
.../...
names of
name A.B.C.D vpnpix1-e1
name X.Y.Z.T vpnpix1-e0
name E.F.G.H defaultgw
intranet name 10.0.0.0
name 192.168.250.0 nat-intranet
name J.K.L.M internetgw
name 10.M.N.P server1
name Server2 10.M.N.Q
name 10.M.N.R server3
name 192.168.252.0 remotevpnLAN
name 10.1.71.0 nat-remotevpnLAN
.../...
object-group network server-group
description servers used by conencted to users remote LAN through a VPN tunnel
network-host server1 object
host Server2 network-object
network-host server3 object
.../...
access allowed INCOMING tcp nat-remotevpnLAN 255.255.255.0 list object-group server-eq - ica citrix
.../...
OUTBOUND ip intranet 255.0.0.0 allowed access list nat-remotevpnLAN 255.255.255.0
access list permits INTRANET-to-remotevpnLAN-VPN ip intranet 255.0.0.0 255.255.255.0 remotevpnLAN
access-list SHEEP, remotevpnLAN permits intranet ip 255.0.0.0 255.255.255.0 nat-remotevpnLAN
.../...
IP address outside the vpnpix1-e0 255.255.255.240
IP address inside the vpnpix1-e1 255.255.252.0
.../...
Global 192.168.250.1 1 (outside)
NAT (inside) 0 access-list SHEEP-to-remotevpnLAN
NAT (inside) 1 intranet 255.0.0.0 0 0
.../...
static (inside, outside) server1 server1 netmask 255.255.255.255 0 0
public static server2 (indoor, outdoor) server2 netmask 255.255.255.255 0 0
public static server3 (indoor, outdoor) server3 netmask 255.255.255.255 0 0
static (exterior, Interior) nat-remotevpnLAN remotevpnLAN netmask 255.255.255.0 0 0
.../...
Access-group ENTERING into the interface outside
Access-group OUTGOING in the interface inside
Route outside 0.0.0.0 0.0.0.0 internetgw 1
Route inside the intranet 255.0.0.0 defaultgw 1
.../...
Permitted connection ipsec sysopt
.../...
Crypto ipsec transform-set esp-3des esp-md5-hmac VPN - TS1
.../...
map BusinessPartners 30 ipsec-isakmp crypto
card crypto BusinessPartners 30 matches the INTRANET-to-remotevpnLAN-VPN address
card crypto BusinessPartners 30 set peer remotevpnpeer
card crypto BusinessPartners 30 game of transformation-VPN-TS1
BusinessPartners outside crypto map interface
ISAKMP allows outside
.../...
ISAKMP key * address remotevpnpeer netmask 255.255.255.255
ISAKMP identity address
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 3des encryption
ISAKMP policy 10 md5 hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 28800
part of pre authentication ISAKMP policy 20
ISAKMP policy 20 3des encryption
ISAKMP policy 20 chopping sha
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 28800
part of pre authentication ISAKMP policy 30
ISAKMP policy 30 3des encryption
ISAKMP policy 30 md5 hash
30 1 ISAKMP policy group
ISAKMP duration strategy of life 30 28800
.../...
: end
################## DEBUG ############################
vpnpix1 # debug crypto isakmp
vpnpix1 #.
ISAKMP (0): early changes of Main Mode
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
Exchange OAK_MM
ISAKMP (0): treatment ITS payload. Message ID = 0
ISAKMP (0): audit ISAKMP transform 1 against the policy of priority 10
ISAKMP: 3DES-CBC encryption
ISAKMP: MD5 hash
ISAKMP: default group 2
ISAKMP: preshared auth
ISAKMP: type of life in seconds
ISAKMP: duration of life (basic) of 28800
ISAKMP (0): atts are acceptable. Next payload is 0
ISAKMP (0): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication
to return to the State is IKMP_NO_ERROR
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
Exchange OAK_MM
ISAKMP (0): processing KE payload. Message ID = 0
ISAKMP (0): processing NONCE payload. Message ID = 0
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): ID payload
next payload: 8
type: 1
Protocol: 17
Port: 500
Length: 8
ISAKMP (0): the total payload length: 12
to return to the State is IKMP_NO_ERROR
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
Exchange OAK_MM
ISAKMP (0): processing ID payload. Message ID = 0
ISAKMP (0): HASH payload processing. Message ID = 0
ISAKMP (0): SA has been authenticated.
ISAKMP (0): start Quick Mode Exchange, M - ID - 1346336108:afc08a94
to return to the State is IKMP_NO_ERROR
ISAKMP (0): send to notify INITIAL_CONTACT
ISAKMP (0): sending message 24578 NOTIFY 1 protocol
Peer VPN: ISAKMP: approved new addition: ip:remotevpnpeer / 500 Total VPN peer: 3
Peer VPN: ISAKMP: Peer ip:remotevpnpeer / 500 Ref cnt incremented: 1 Total VPN peer: 3
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP (0): processing NOTIFY payload Protocol 14 1
SPI 0, message ID = 476084314
to return to the State is IKMP_NO_ERR_NO_TRANS
ISAKMP (0): retransmission of the phase 2 (0/0)... mess_id 0xafc08a94
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
ISAKMP (0): start Quick Mode Exchange, M - ID 1919346690:7266e802
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
ISAKMP (0): retransmission of the phase 2 (1: 1)... mess_id 0xafc08a94
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
ISAKMP (0): retransmission of the phase 2 (0/2)... mess_id 0x7266e802
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
ISAKMP (0): retransmission of the phase 2 (2/3)... mess_id 0xafc08a94
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
ISAKMP (0): retransmission of the phase 2 (1/4)... mess_id 0x7266e802
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
ISAKMP (0): start Quick Mode Exchange, M - ID - 1475513565:a80d7323
ISAKMP (0): delete SA: CBC vpnpix1-e0, dst remotevpnpeer
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: drop msg deleted his
ISADB: Reaper checking HIS 0x10ff1ac, id_conn = 0 DELETE IT!
Peer VPN: ISAKMP: Peer ip:remotevpnpeer / 500 Ref cnt decremented for: 0 Total of VPN peer: 3
Peer VPN: ISAKMP: deleted peer: ip:remotevpnpeer / 500 Total VPN peers: 2
ISADB: Reaper checking HIS 0 x 1100984, id_conn = 0
ISADB: Reaper checking HIS 0x10fcddc, id_conn = 0
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: its not located for ike msg
#####################################################
Get rid of:
static (exterior, Interior) nat-remotevpnLAN remotevpnLAN netmask 255.255.255.0 0 0
You don't need it. Change:
OUTBOUND ip intranet 255.0.0.0 allowed access list nat-remotevpnLAN 255.255.255.0
access-list SHEEP, remotevpnLAN permits intranet ip 255.0.0.0 255.255.255.0 nat-remotevpnLAN
TO:
access list permits OUTGOING ip intranet 255.0.0.0 255.255.255.0 remotevpnLAN
access-list SHEEP, remotevpnLAN permits intranet ip 255.0.0.0 255.255.255.0 remotevpnLAN
This indicates the PIX not NAT IPSec traffic. NAT happens BEFORE IPSec in the PIX, so if you the traffic IPSec nat it will never match your crypto access list and will not be encrypted.
This, however, should not stop the tunnel of Phase 2 of the course of construction, they would stop flowing above the tunnel, traffic, so you still have a problem somewhere. What I'm guessing, is that the Sonicwall (SW) has a different encryption-defined list access, it must be the EXACT OPPOSITE of what is configured on the PIX. In other words, the SW should be encrypting the traffic of "remotevpnLAN-24" "intranet/8", make sure that the subnet mask ar ETHE same too. "
To answer your questions:
1. it simply means that the PIX has not received a response and is to retransmit the last ISAKMP packet. The process_block simply means that the PIX has dropped a package that was to be encrypted because the IPSec tunnel has not been built. If you get the tunnel built, these messages will disappear.
2. the 3 first static does not appear to be linked to the tunnel IPSec, if they are simply to access a server inside, then they will not affect this VPN tunnel. The last of them should be deleted, as I already said.
3. for traffic initiated from inside the PIX, the order is incoming ACL, then NAT, IPSec processing. That's why your OUTGOING ACL must allow traffic first, then your NAT 0 statement refuses to be NAT had, then the encryption function is the traffic and the number.
4 do what I said above :-)
If you still have no luck, re - run debugs, but initiate traffic behind the Sonicwall, in this way the Sonicwall will try and debug of build that the tunnel and you will get more information on the PIX. Mainly, we'll see what traffic model the SonicWall is configured to encrypt (you don't see if the PIX initiates the tunnel).
-
Client VPN suddenly does not work
An external interface address changed on this PIX 501 yesterday - all of a sudden their client VPN does not work. I checked that nothing in the config VPN configuration has changed. I now see a *(HASH.) ("OAK NOTIFY ISAKMP INFO: NO_PROPOSAL_CHOSEN") in the journal on the VPN client.
I crossed referenced on google - nothing in the statements of NAT, Access-list, or VPN configurations have changed. Any ideas?
Thank you
GregYour configuration is absolutely perfect.
Please, try the following:
no interface card VPN crypto outdoors
card crypto VPN outside interface
Remove and reapply the cryptomap on the external interface and see if that helps.
Thank you
Jeet Kumar
-
Site-to-Site VPN Ping does not
I configured a vpn site-to site between two firewalls ASA 5505. Establishes the tunnel, but the icmp traffic does not pass. In fact, ping worked twice, but only at random. I need to work on a regular basis. I have attached the configurations as well as an output of the packet - trace both of the ASA and the IPSec and its ISAKMP. Thanks for any help you can provide.
ASA Configuration 1:
ASA Version 8.0 (3)
!
hostname asa1
activate the encrypted password of A.zMQonBIU0NmOC0
names of
!
interface Vlan1
nameif inside
security-level 100
IP 10.1.50.253 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 1.1.1.1 255.255.255.240
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
OMV1AjIsWknnKr9H encrypted passwd
boot system Disk0: / asa803 - k8.bin
passive FTP mode
acl_out list extended access permit tcp any host 63.76.12.195 eq smtp
acl_out list extended access permit tcp any host 63.76.12.195 eq www
acl_out list extended access permit tcp any host 63.76.12.195 eq 3389
acl_out list extended access permit tcp any host 63.76.12.195 eq ftp
acl_out list extended access permit tcp any host 63.76.12.195 eq ftp - data
acl_out list extended access permit tcp any host 63.76.12.195 eq telnet
acl_out list extended access permit tcp any host 63.76.12.195 eq 5800
acl_out list extended access permit tcp any host 63.76.12.195 eq 5900
acl_out list extended access permit tcp any host 63.76.12.195 eq https
acl_out list extended access permit tcp any host 63.76.12.196 eq www
acl_out list extended access permit tcp any host 63.76.12.196 eq https
acl_out list extended access permit tcp any host 63.76.12.196 eq smtp
acl_out list extended access permit tcp any host 63.76.12.196 eq 3389
acl_out list extended access permit icmp any one
access-list 101 extended allow ip 10.1.50.0 255.255.255.0 10.1.40.0 255.255.255.0
access-list 101 extended allow ip 10.1.50.0 255.255.255.0 10.1.51.0 255.255.255.0
vpn-fargo extended ip 10.1.50.0 access list allow 255.255.255.0 10.1.51.0 255.255.255.0
pager lines 24
Enable logging
debug logging in buffered memory
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
IP local pool ippool 10.1.40.1 - 10.1.40.254
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
ASDM image disk0: / asdm - 523.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
(Inside) NAT 0-list of access 101
NAT (inside) 1 0.0.0.0 0.0.0.0
static (inside, outside) 1.1.1.2 tcp ftp 10.1.50.3 ftp netmask 255.255.255.255
static (inside, outside) 1.1.1.2 tcp ftp - data 10.1.50.3 ftp - data netmask 255.255.255.255
static (inside, outside) 1.1.1.2 tcp telnet 10.1.50.3 telnet netmask 255.255.255.255
static (inside, outside) tcp 1.1.1.2 5800 10.1.50.102 5800 netmask 255.255.255.255
static (inside, outside) 1.1.1.2 tcp 5900 10.1.50.102 5900 netmask 255.255.255.255
static (inside, outside) 1.1.1.2 tcp 3389 10.1.50.5 3389 netmask 255.255.255.255
static (inside, outside) 1.1.1.3 10.1.50.6 netmask 255.255.255.255
Access-group acl_out in interface outside
Route outside 0.0.0.0 0.0.0.0 1.1.1.0 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
Crypto-map dynamic dynmap 10 transform-set RIGHT
map mymap 10-isakmp ipsec crypto dynamic dynmap
card crypto mymap 20 match address vpn-fargo
card crypto mymap 20 peers set 2.2.2.2
card crypto mymap 20 transform-set RIGHT
crypto mymap 20 card value reverse-road
mymap outside crypto map interface
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400
crypto ISAKMP ipsec-over-tcp port 10000
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 5
Console timeout 0
management-access inside
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
internal group vpn3000 strategy
attributes of the strategy group vpn3000
value of server WINS 10.1.50.5
value of 10.1.50.5 DNS server 10.1.50.6
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value 101
asa1.com value by default-field
disable authentication of the user
the address value ippool pools
encrypted vpn Tw.atDK7GScnXkMJ password username
vpn tunnel-group type remote access
VPN tunnel-group general attributes
Group Policy - by default-vpn3000
jtvpn group of tunnel ipsec-attributes
pre-shared-key *.
tunnel-group 2.2.2.2 type ipsec-l2l
2.2.2.2 tunnel-group ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the icmp
inspect the icmp error
!
global service-policy global_policy
context of prompt hostname
: end
ASA 2 configuration:
ASA Version 8.2 (1)
!
hostname asa2
activate the encrypted password of A.zMQonBIU0NmOC0
1vU9VISnc.IQ6OSN encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
IP 10.1.51.253 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address 2.2.2.2 255.255.255.240
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
vpn - dsm extended ip 10.1.51.0 access list allow 255.255.255.0 10.1.50.0 255.255.255.0
IP 10.1.51.0 allow Access-list extended sheep 255.255.255.0 10.1.50.0 255.255.255.0
access outside-access list extended icmp permitted an echo
outside-access extended access list permit icmp any any echo response
outside-access extended access list permit all all unreachable icmp
access outside-access allowed list icmp exceed all once
pager lines 24
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list sheep
NAT (inside) 1 0.0.0.0 0.0.0.0
access-outside group access component software snap-in interface outside
Route outside 0.0.0.0 0.0.0.0 2.2.2.0 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-3DES esp-3des esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto mymap 10 correspondence address vpn - dsm
card crypto mymap 10 set peer 1.1.1.1
card crypto mymap 10 game of transformation-ESP-3DES
crypto mymap 10 card value reverse-road
mymap outside crypto map interface
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400
Telnet 0.0.0.0 0.0.0.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 5
Console timeout 0
management-access inside
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
tunnel-group 1.1.1.1 type ipsec-l2l
tunnel-group 1.1.1.1 ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the icmp
inspect the icmp error
!
global service-policy global_policy
context of prompt hostname
: end
Packet trace of ASA1:
asa1 (config) # entry packet - trace within the icmp 10.1.50.253 1 1 detailed 10.1.51.253
Phase: 1
Type: FLOW-SEARCH
Subtype:
Result: ALLOW
Config:
Additional information:
Not found no corresponding stream, creating a new stream
Phase: 2
Type:-ROUTE SEARCH
Subtype: entry
Result: ALLOW
Config:
Additional information:
in 0.0.0.0 0.0.0.0 outdoors
Phase: 3
Type: ACCESS-LIST
Subtype:
Result: DECLINE
Config:
Implicit rule
Additional information:
Direct flow from returns search rule:
ID = 0xd49dcce0, priority = 500, area = allowed, deny = true
Hits = 5, user_data = 0 x 6, cs_id = 0 x 0, reverse, flags = 0 x 0 = 0 protocol
SRC ip = 10.1.50.253, mask is 255.255.255.255, port = 0
DST ip = 0.0.0.0 mask 0.0.0.0, port = 0 =
Result:
input interface: inside
entry status: to the top
entry-line-status: to the top
output interface: outside
the status of the output: to the top
output-line-status: to the top
Action: drop
Drop-reason: flow (acl-drop) is denied by the configured rule
Packet trace of ASA2:
asa2 (config) # entry packet - trace within the icmp 10.1.51.253 1 1 detailed 10.1.50.253
Phase: 1
Type: FLOW-SEARCH
Subtype:
Result: ALLOW
Config:
Additional information:
Not found no corresponding stream, creating a new stream
Phase: 2
Type:-ROUTE SEARCH
Subtype: entry
Result: ALLOW
Config:
Additional information:
in 10.1.50.0 255.255.255.0 outside
Phase: 3
Type: ACCESS-LIST
Subtype:
Result: DECLINE
Config:
Implicit rule
Additional information:
Direct flow from returns search rule:
ID = 0xc9583648, priority = 500, area = allowed, deny = true
hits = 9, user_data = 0 x 6, cs_id = 0 x 0, reverse, flags = 0 x 0 = 0 protocol
SRC ip = 10.1.51.253, mask is 255.255.255.255, port = 0
DST ip = 0.0.0.0 mask = 0.0.0.0, port = 0, dscp = 0 x 0
Result:
input interface: inside
entry status: to the top
entry-line-status: to the top
output interface: outside
the status of the output: to the top
output-line-status: to the top
Action: drop
Drop-reason: flow (acl-drop) is denied by the configured rule
ASA 1 IPSec security association:
peer address: 2.2.2.2
Tag crypto map: dynmap, seq num: 10, local addr: 1.1.1.1
local ident (addr, mask, prot, port): (10.1.50.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (10.1.51.0/255.255.255.0/0/0)
current_peer: 2.2.2.2
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
decaps #pkts: 5, #pkts decrypt: 5, #pkts check: 5
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, comp #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0
endpt local crypto. : 1.1.1.1, remote Start crypto. : 2.2.2.2
Path mtu 1500, fresh ipsec generals 58, media, mtu 1500
current outbound SPI: 1F3E7E3A
SAS of the esp on arrival:
SPI: 0x1DFAE5E0 (502982112)
transform: esp-3des esp-md5-hmac no
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 77824, crypto-card: dynmap
calendar of his: service life remaining (KB/s) key: (3824999/28036)
Size IV: 8 bytes
support for replay detection: Y
outgoing esp sas:
SPI: 0x1F3E7E3A (524189242)
transform: esp-3des esp-md5-hmac no
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 77824, crypto-card: dynmap
calendar of his: service life remaining (KB/s) key: (3825000/28034)
Size IV: 8 bytes
support for replay detection: Y
ASA 1 ISAKMP Security Association:
1 peer IKE: 2.2.2.2
Type: L2L role: answering machine
Generate a new key: no State: MM_ACTIVE
ASA 2 IPSec security association:
peer address: 1.1.1.1
Tag crypto map: mymap, seq num: 10, local addr: 2.2.2.2
list of access vpn - dsm allowed ip 10.1.51.0 255.255.255.0 10.1.50.0 255.255.255.0
local ident (addr, mask, prot, port): (10.1.51.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (10.1.50.0/255.255.255.0/0/0)
current_peer: 63.76.12.194
#pkts program: 5, #pkts encrypt: 5, #pkts digest: 5
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 5, comp #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0
endpt local crypto. : 2.2.2.2, remote Start crypto. : 1.1.1.1
Path mtu 1500, fresh ipsec generals 58, media, mtu 1500
current outbound SPI: 1DFAE5E0
SAS of the esp on arrival:
SPI: 0x1F3E7E3A (524189242)
transform: esp-3des esp-md5-hmac no compression
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 81920, crypto-map: mymap
calendar of his: service life remaining (KB/s) key: (4374000/27900)
Size IV: 8 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001
outgoing esp sas:
SPI: 0x1DFAE5E0 (502982112)
transform: esp-3des esp-md5-hmac no compression
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 81920, crypto-map: mymap
calendar of his: service life remaining (KB/s) key: (4373999/27900)
Size IV: 8 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001
ASA 2 ISAKMP Security Association:
1 peer IKE: 1.1.1.1
Type: L2L role: initiator
Generate a new key: no State: MM_ACTIVE
Hi Mike,.
I see the following in your configuration:
map mymap 10-isakmp ipsec crypto dynamic dynmap
Sequence number of Th for the peer 2.2.2.2 is 20 so we first hit the dynamic map that could cause this problem.
To avoid this, I suggest you do the following:
No map mymap 10-isakmp ipsec crypto dynamic dynmap
map mymap 65535-isakmp ipsec crypto dynamic dynmap
To validate this fact, if you look at the SA on ASA1 ipsec, you will find that it was negotiated with dymap (card crypto seq 10) and not 20!
ASA 1 IPSec security association:
peer address: 2.2.2.2
Tag crypto map: dynmap, seq num: 10, local addr: 1.1.1.1
local ident (addr, mask, prot, port): (10.1.50.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (10.1.51.0/255.255.255.0/0/0)
current_peer: 2.2.2.2
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
decaps #pkts: 5, #pkts decrypt: 5, #pkts check: 5
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, comp #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0
Hope this helps!
See you soon,.
Manasi!
-
Remote user VPN IPSec does not work
Hello
I'm trying to configure a remote IPsec VPN on a Cisco router user 1921 but it doesn't work for some reason I don't understand. Does anyone have an idea? I forgot something?
Thank you in advance for your help!
This is part of my configuration:
AAA new-model
!
local AuthentVPN AAA authentication login
local AuthorizVPN AAA authorization network
!
AAA - the id of the joint session
!
username password xxxxxx xxxxx 0 0 encrypted
!
crypto ISAKMP policy 1
BA aes 256
preshared authentication
Group 5
life 3600
!
ISAKMP crypto client configuration group vpnclient
key XXXXXXXXXXXXXXXXXXXXXXXX
DNS 192.168.0.254
GVA area. INTRA
pool IPPoolVPN
ACL 100
!
!
Crypto ipsec transform-set esp - aes esp-sha-hmac T1
tunnel mode
!
crypto dynamic-map 10 DynMap
game of transformation-T1
!
list of authentication of crypto client myMap AuthentVPN map
card crypto myMap AuthorizVPN isakmp authorization list
client configuration address map myMap crypto answer
card crypto myMap 100-isakmp dynamic ipsec DynMap
!
interface Dialer1
MTU 1492
the negotiated IP address
IP access-group RESTRICT_ENTRY_INTERNET in
NAT outside IP
IP virtual-reassembly in
encapsulation ppp
Dialer pool 1
Dialer-Group 1
PPP authentication pap callin
PPP chap hostname xxxxxxxxx
PPP chap password 0 xxxxxxxxx
PPP pap sent-name of user password 0 xxxxxxxxxxxx xxxxxxxxxxxxxx
crypto myMap map
!
IP pool local 192.168.10.0 IPPoolVPN 192.168.10.253
!
overload of IP nat inside source list 110 interface Dialer1
!
access-list 100 permit ip 192.168.0.0 0.0.0.255 192.168.10.0 0.0.0.255
access-list 110 deny ip 192.168.0.0 0.0.0.255 192.168.10.0 0.0.0.255
The conflict will be terminated and should be avoided. It might work if you disable split-mining and road, all via the VPN client...
Ideally business networks should not use 192.168.0.0/24; 1 or 2 either since they are common in home routers... you can also have them change their home network easily
Patrick
-
SonicWALL VPN Client does not connect
I use Windows 10 Pro. I can install the NEW Client VPN (4.9.0.2012) very well. When I put in information that works very well. It will even connected, the first time, when you have completed the installation. Here's the crazy part. I can't disable the VPN client. When I try to ACTIVATE the connection he wants to use a telephone line. I can uninstall the client software and tell him NOT to keep data. I can reinstall the client and it will connect the first time. After that it will not. I have already told him to use LAN ONLY entered in the network settings. Only, it crashes and then trying to acquire IP.
Norman
I think you are talking about the Global VPN Client. You must uninstall this version of CVM and install the most recent of 4.9.4.0306 which has been validated to run on Windows 10.
-
Client VPN works does not properly in windows 7
I use the latest version of the VPN client in windows 7 for multiple users and each of them have problems, they connect apparently but when trying to access the network internal no navigation link is set up, someone has the same problem, nothing has been published in reclassification microsoft site this issue they claim, it should work perfectly but aparently not.
Any help will be greatly appreciated
We use VPN client v5.0.05.0290 without problem. Here is a link I found initially when testing with Windows 7 and VPN client... maybe it will help you solve your problem.
I didn't have to resort to this procedure on windows 7 pro 32-bit.
On a different note, can pass you the traffic to hosts on your internal network by IP address or hostname? I found a problem using the AnyConnect client - only to not configure the connection profile to indicate to the client that connects to what our internal domain name was... then my clients have not been able to establish connections incoming withougt manually by adding the domain name until the end of the hostname... shot in the dark...
Good luck!!
-
Site to Site VPN configuration does not
Hello
I just tried to set up a test site to site VPN. Diagram of arrangement is attached. Router R2 is supposed to act as the 'Internet' to allow connectivity between the two networks.
My VPN on ASA1 and ASA2 configs are below:
ASA1
Note to outside_cryptomap_1 to access list VPN traffic to encrypt
outside_cryptomap_1 to access extended list ip 10.10.10.0 allow 255.255.255.0 172.16.10.0 255.225.255.0Crypto ikev1 allow outside
IKEv1 crypto policy 1
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400tunnel-group 11.11.11.2 type ipsec-l2l
IPSec-attributes tunnel-Group 11.11.11.2
Cisco pre-shared key IKEv1Crypto ipsec transform-set ikev1 AES - SHA esp-aes-256 esp-sha-hmac
card crypto outside_map 1 match address outside_cryptomap_1
peer set card crypto outside_map 1 11.11.11.2
card crypto outside_map 1 set of transformation-AES-SHA
outside_map interface card crypto outsideASA2
Note to outside_cryptomap_1 to access list VPN traffic to encrypt
permit access list extended ip 172.16.10.0 outside_cryptomap_1 255.255.255.0 10.10.10.0 255.225.255.0Crypto ikev1 allow outside
IKEv1 crypto policy 1
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400tunnel-group 12.12.12.2 type ipsec-l2l
IPSec-attributes tunnel-group 12.12.12.2
Cisco pre-shared key IKEv1Crypto ipsec transform-set ikev1 AES - SHA esp-aes-256 esp-sha-hmac
card crypto outside_map 1 match address outside_cryptomap_1
peer set card crypto outside_map 1 12.12.12.2
card crypto outside_map 1 set of transformation-AES-SHA
outside_map interface card crypto outsideI can ping with the ASA2 ASA1, but when I try to test the VPN trying from one PC to another, I get nothing.
I tried a few commands show and they came out absolutely empty... as I have not configured:
SH in detail its crypto isakmp
There are no SAs IKEv1
There are no SAs IKEv2
SH crypto ipsec his
There is no ipsec security associations
Anyone have any ideas?
Hi martin,
Your configs are quite right. I tried your script, its works really well. Here's the configs & outputs.
What I mentioned in the previous note follow this.--------------------
ASA1
ASA1 (config) # sh run
: Saved
:
ASA Version 8.0 (2)
!
hostname ASA1
activate 8Ry2YjIyt7RRXU24 encrypted password
names of
!
interface Ethernet0/0
nameif outside
security-level 0
IP 12.12.12.2 255.255.255.0
!
interface Ethernet0/1
nameif inside
security-level 100
10.10.10.2 IP address 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/5
Shutdown
No nameif
no level of security
no ip address
!
2KFQnbNIdI.2KYOU encrypted passwd
passive FTP mode
extended vpn 10.10.10.0 ip access list allow 255.255.255.0 172.16.10.0 255.255.255.0
pager lines 24
Within 1500 MTU
Outside 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Route outside 0.0.0.0 0.0.0.0 12.12.12.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac tset
card crypto cmap 1 match for vpn
card crypto cmap 1 set peer 11.11.11.2
card crypto cmap 1 transform-set tset
cmap outside crypto map interface
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
md5 hash
Group 5
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
!
!
tunnel-group 11.11.11.2 type ipsec-l2l
IPSec-attributes tunnel-Group 11.11.11.2
pre-shared-key *.
context of prompt hostname
Cryptochecksum:00000000000000000000000000000000
: end
ASA1 (config) #.
---------------------ASA2 (config) # sh run
: Saved
:
ASA Version 8.0 (2)
!
hostname ASA2
activate 8Ry2YjIyt7RRXU24 encrypted password
names of
!
interface Ethernet0/0
nameif outside
security-level 0
IP 11.11.11.2 255.255.255.0
!
interface Ethernet0/1
nameif inside
security-level 100
IP 172.16.10.2 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/5
Shutdown
No nameif
no level of security
no ip address
!
2KFQnbNIdI.2KYOU encrypted passwd
passive FTP mode
extended vpn 172.16.10.0 ip access list allow 255.255.255.0 10.10.10.0 255.255.255.0
pager lines 24
Outside 1500 MTU
Within 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Route outside 0.0.0.0 0.0.0.0 11.11.11.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac tset
card crypto cmap 1 match for vpn
card crypto cmap 1 set peer 12.12.12.2
card crypto cmap 1 transform-set tset
cmap outside crypto map interface
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
md5 hash
Group 5
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
!
!
!
tunnel-group 12.12.12.2 type ipsec-l2l
IPSec-attributes tunnel-group 12.12.12.2
pre-shared-key *.
context of prompt hostname
Cryptochecksum:00000000000000000000000000000000
: end
ASA2 (config) #.-------------------------
OUTPUTS:*********************
ASA1 (config) # sh crypto isakmp his
ITS enabled: 1
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 11 peer IKE: 11.11.11.2
Type: L2L role: initiator
Generate a new key: no State: MM_ACTIVE---------------------
ASA1 (config) # sh crypto ipsec his
Interface: outside
Tag crypto map: cmap, seq num: 1, local addr: 12.12.12.2access vpn ip 10.10.10.0 list allow 255.255.255.0 172.16.10.0 255.255.255.0
local ident (addr, mask, prot, port): (10.10.10.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (172.16.10.0/255.255.255.0/0/0)
current_peer: 11.11.11.2#pkts program: 50, #pkts encrypt: 50, #pkts digest: 50
#pkts decaps: 49, #pkts decrypt: 49, #pkts check: 49
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 50, comp #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0local crypto endpt. : 12.12.12.2, remote Start crypto. : 11.11.11.2
------------------------
ASA2 (config) # sh crypto isakmp hisITS enabled: 1
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 11 peer IKE: 12.12.12.2
Type: L2L role: answering machine
Generate a new key: no State: MM_ACTIVE------------------------
ASA2 (config) # sh crypto ipsec his
Interface: outside
Tag crypto map: cmap, seq num: 1, local addr: 11.11.11.2access vpn ip 172.16.10.0 list allow 255.255.255.0 10.10.10.0 255.255.255.0
local ident (addr, mask, prot, port): (172.16.10.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (10.10.10.0/255.255.255.0/0/0)
current_peer: 12.12.12.2#pkts program: 49, #pkts encrypt: 49, #pkts digest: 49
#pkts decaps: 50, #pkts decrypt: 50, #pkts check: 50
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 49, #pkts comp failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0local crypto endpt. : 11.11.11.2, remote Start crypto. : 12.12.12.2
------------------------- -
'Connected' but 5.0.07.0440 VPN client does not work
Hello
IMPORTANT THING I FORGOT: the customer seems to be connected. It shows a lock locked and says connected but ping shows that nothing is not working too.
I recently tried, in vain, to connect my win7 64 bit laptop to my place of work with the Client VPN 5.0.07.0440. All technitians and support staff could not understand the problem that prevented successful login. Later, I could connect my laptop using the VPN Client 5.0.07.0410 - same home network via an old k9, winXP.
What could be the problem with Win7 system? Work on my old laptop is a temporary solution, but not a good thing. I would be grateful for all the help I can get.
I tried:
-For each access to the Cisco VPN client on my ZoneAlarm firewall.
-Turning off the firewall completely.
-Connect to a different network (in an Internet Café).
Personal support at work said this isn't the network (they checked my too just in case wifi router settings) from my old computer obviously connects without any problem on the first try.
ANY ideas would be very appreciated!
Here is the info yet:
-Cisco VPN Client 5.0.07.0440
-64-bit Windows 7 Home Premium SP 1.
My security software (which may cause the problem as far as I know, even if I close ZoneAlarm):
-Free firewall zone alarm
-Microsoft Security Essentials.
(maybe windows firewall too, if it automatically restarts when I turned off zone alarm)
IMPORTANT THING I FORGOT: the customer seems to be connected. It shows a lock locked and says connected but ping shows that nothing is not working too.
Hello
VPN client traffic is not transmitted from your computer to the VPN at all tunnel.
It's if you have even tried the connection to the remote server before you took this screenshot?
ID say it is a problem with your computer. Some software cause problems for the VPN Client or Client VPN software has problems with the network card real or something similar.
One thing I might suggest is uninstall the firewall software and the VPN Client. After that, it is enough to install the VPN Client and try to login and check the statistics of same as in the pictures above.
-Jouni
EDIT: Whoa 300 posts already
Edit2: If you have a full VPN tunnel, your computer must usually generate connections to the VPN tunnel even if you do not manually connect what either. What makes it even more strange that there are absolutely no traffic in the tunnel. Full VPN tunnel means that all traffic from your computer is transferred to the VPN tunnel when his assets.
-
I am trying to set up a VPN between a 2901 router and 831, but I'm not having any success. When I run crypto isakmp sa, I get this:
cisco831 #sh crypto isakmp his
IPv4 Crypto ISAKMP Security Association
status of DST CBC State conn-id slot
IPv6 Crypto ISAKMP Security AssociationIt doesn't seem to be a sign of life. I can access internet ok on both routers, but the failure of attempts to ping between the routers LAN IP. I guess it's a problem of nat or access-list, but I don't know what I'm missing at this time. Here are my configs:
CISCO 2901
version 15.0
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug datetime localtime
Log service timestamps uptime
encryption password service
!
host name 2901
!
boot-start-marker
boot-end-marker
!
no logging rate limit
no console logging
Select the secret XXXXXXXXXXXXXXX!
No aaa new-model
!
No ipv6 cef
no ip source route
IP cef
!
IP domain name mondomaine.fr
inspect CBAC tcp IP name
inspect the name CBAC icmp IP
inspect the name CBAC udp IP
!
Authenticated MultiLink bundle-name Panelsecret user name me XXXXXXXXXXXXXXX 5!
redundancy
!
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
ISAKMP crypto key address 173.x.x.x mypassword
!
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANSFORMSET
!
MYVPN 10 ipsec-isakmp crypto map
the value of 173.x.x.13 peer
game of transformation-TRANSFORMSET
PFS group2 Set
match address 199
!
interface GigabitEthernet0/0
Description of the Internet
IP address 173.x.x.x 255.255.255.248
NAT outside IP
IP inspect CBAC out
IP virtual-reassembly
automatic duplex
automatic speed
card crypto MYVPN
!
!
interface GigabitEthernet0/1
Description of LAN
no ip address
automatic duplex
automatic speed
!
!
interface GigabitEthernet0/1.1
encapsulation dot1Q 2
IP 192.168.1.1 255.255.255.0
IP access-group 100 to
penetration of the IP stream
stream IP output
IP nat inside
IP virtual-reassembly
!
interface GigabitEthernet0/1.2
encapsulation dot1Q 3
IP 192.168.2.1 255.255.255.0
IP access-group 101 in
penetration of the IP stream
IP nat inside
IP virtual-reassembly
!
no ip forward-Protocol nd
!
IP http server
IP http secure server
IP flow-export GigabitEthernet0/1.1 source
IP flow-export version 5
flow IP 192.168.1.5 export destination 9996
!
overload of IP nat inside source list NAT interface GigabitEthernet0/0
IP route 0.0.0.0 0.0.0.0 173.x.x.x
!
NAT extended IP access list
ip permit 192.168.1.0 0.0.0.255 any
!
threshold of journal-update of 2147483647 IP access list
recording of debug trap
logging 192.168.1.5
access-list 199 permit ip 192.168.1.0 0.0.0.255 172.20.0.0 0.0.0.255
!
control plan
!
Line con 0
line to 0
line vty 0 4
exec-timeout 480 0
password 7 XXXXXXXXXXXXXXXlocal connection
entry ssh transport
!
Scheduler allocate 20000 1000
end
************************************************************************
CISCO 831
Version 12.4
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
hostname cisco831
!
boot-start-marker
boot-end-marker
!
activate secret XXXXXXXXXXXXXXX!
AAA new-model
!
!
AAA authentication login me local
!
!
AAA - the id of the joint session
!
!
!
!
No dhcp use connected vrf ip
DHCP excluded-address IP 172.20.0.1
!
IP dhcp pool mypool
network 172.20.0.0 255.255.255.0
WR domain name
Server DNS 8.8.8.8
router by default - 172.20.0.1
!
IP cef
no ip domain search
IP domain name mondomaine.fr
!
Authenticated MultiLink bundle-name Panel
secret user name me 5 XXXXXXXXXXXXXXX!
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
ISAKMP crypto key address 173.x.x.x mypassword
!
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANSFORMSET
!
MYVPN 10 ipsec-isakmp crypto map
the value of 173.x.x.x peer
game of transformation-TRANSFORMSET
PFS group2 Set
match address 199
!
Archives
The config log
hidekeys
!
interface Ethernet0
LAN description
IP 172.20.0.1 address 255.255.255.0
IP access-group 100 to
IP nat inside
IP virtual-reassembly
!
interface Ethernet1
Description of the internet
IP address 173.x.x.13 255.255.255.248
NAT outside IP
IP virtual-reassembly
automatic duplex
card crypto MYVPN
!
interface Ethernet2
no ip address
Shutdown
!
IP forward-Protocol ND
IP route 0.0.0.0 0.0.0.0 173.x.x.14
!
no ip address of the http server
no ip http secure server
!
overload of IP nat inside source list 100 interface Ethernet1Crypto-list extended IP access list
ip licensing 172.20.0.0 0.0.0.255 192.168.1.0 0.0.0.255access-list 100 permit ip 172.20.0.0 0.0.0.255 any
access-list 199 permit ip 172.20.0.0 0.0.0.255 192.168.1.0 0.0.0.255
!
control plan
!
Line con 0
password 7 XXXXXXXXXXXXXXXno activation of the modem
line to 0
line vty 0 4
privilege level 15
transport input telnet ssh
!
max-task-time 5000 Planner
endA few things that need to be changed:
CISCO 2901:
(1) ACL 100 applies to GigabitEthernet0/1.1, however, I do not see 100 ACL configured on the configuration.
(2) ACL 101 is applied to GigabitEthernet0/1.2, however, I do not see that ACL 101 exists in the configuration.
(3) NAT ACL must exempt traffic between 2 local networks as follows:
NAT extended IP access list
1 refuse ip 192.168.1.0 0.0.0.255 172.20.0.0 0.0.0.255CISCO 831:
(1) ACL 100 is currently applied to the configuration section 2: NAT and Ethernet0. I would create a new ACL for instruction of NAT that should be added to the deny ACL (NAT exemption) as follows:
access-list 150 deny ip 172.20.0.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 150 permit ip 172.20.0.0 0.0.0.255 any
overload of IP nat inside source list 150 interface Ethernet1
no nat ip inside the source list 100 interface Ethernet1 overload
Hope that helps.
-
Remote access vpn Wizard does not work?
I have a brand new ASA 5505 running version 8.2 (5). Am connected with the ASDM and run the installation wizard and the VPN remote access Wizard. I am not able to ping the external interface of the internet, and my VPN client gets no response when you try to connect. Config is attached. Any suggestions?
Hello
1.), you need the default route for the SAA to be able to send traffic to the VPN connection initiator
2.) I guess that is something done by hand when to create the basic configuration of the firewall, OR maybe the Startup Wizard would handle this when you make the ASA initially basic settings.
-Jouni
-
Help! Configuration VPN Pix535 does not
Hello
We are trying to implement a remote vpn to allow clients to our private lan and then be able to use outgoing https. Don't break the tunnel, according to the needs of the client to look like they come from our area. Any help would be greatly appreciated. We can connect to the vpn with the customer, and we can ping within the network, but have problems trying to use HTTPS coming out through the client. Please find my current config attached. Thanks in advance.
permit same-security-traffic intra-interface
NAT (outside) 101 172.21.200.0 netmask 255.255.255.240
I would also add...
ISAKMP nat-traversal crypto
-
HP 10 G2 2301 Tablet: the correct charger for Hp 10 G2 2301 Tablet does not load
The original charge cord for my Hp 10 G2 2301 Tablet does not load my tablet.
Hi there @Bb16,
Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your tablet will not charge with the charge lead. I'm happy to help you with this.
as you said that you are using the correct charge lead, I understand this document for reference: G2 HP 10 tablets - the Tablet is not fresh, I suggest to try your adapter into a different electrical outlet, preferably with a direct connection to wall to remove any other question possible bad connection.
Y at - there no sign that there is no power at all?
The connector on the Tablet seems to be loose?
If you have access to another adapter, also, try to avoid the card itself.
If none of those who make a difference, then browse this document. Tablets - HP Tablet does not (Android 5.0/Lollipop).
If at the end, you are still having the same problem, then please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.
Maybe you are looking for
-
Impossible to find in the market (galaxy tab)
I checked my account through the web market and the device name seems fine (Samsung Galaxy P-1000). When I try to install through the web market, he said that my device is not compatible. By clicking on the installation to mozilla.com link shows that
-
Info credit card changed by apple and iCloud wallet
The news channel credit card has changed by key portfolio and iCloud to apple, iPad Air AutoFill only option gives to the previous card, how do I update. I receive the check on the iphone and is code entered without problem.
-
I have a LabVIEW 2013 TestStand Operator custom Interface which built in the WebBrowser using the WebBrowser ActiveX control. The browser is linked to an internal server that serves web pages to Dokuwiki. I updated Dokuwiki software for more later, a
-
WndOws XP install problems with Lexmark X 2480 printer no cd Can't seem to get the printer to the appropriate port to communicate with the printer Lexmark 2480. Downloaded, but prints blank pages.
-
Hi all, I have a M4700 of precision with windows 7 SP1 OEM, I am confused, I can install windows 10 pro free or what I need to purchase a license upgrade (if I do it now, before July 29)? Consider I work in a corporate environment, but the license ap