VPN peers on old ASA, reverse routing as we migrate to the new ASA and new Internet

Similar Questions

• Pavilion a6500f: can I use my old hard drive as a second drive to the new I install.

  I have a Pavilion a6500f I can access is no longer as he continues to tell me there are registry errors.  My recovery disk (I got a) or do a hard reset or else he will start.  It came with a window that says recovery system or start Windows normally.  I get a new hard drive to it and have a whole new Windows 7 installed.  The thing is that I don't want to lose all my stuff on the old hard drive.  So my question is can I install the OLD hard drive as a second drive to the new?  If I can then I can just copy all the files from the old drive to the new and use the old as a memory drive.

  Any help will be greatly appreciated.

  The simple answer is Yes.

  (1) I would like to replace the hard drive with the same drive size or larger. But does not exceed 2 T.

  (2) I hope you made the original recovery DVD set the original recovery firstly, DVD media DVD + R try as these will save you having to create a driver disk.  If you really have to buy a complete set of recovery, get it here. It will have all the necessary drivers.  Only $27.00

  (3) I copy the files and destroy the old disk. Its usefulness is damaged since 2008.

• Private of IPSec VPN-private network between ASA and router

  Hello community,

  This is first time for me to configure IPSec VPN between ASA and router. I have an ASA 5540 at Headquarters and 877 router to EH Branch

  Headquarters ASA summary.

  Peer IP: 111.111.111.111

  Local network: 10.0.0.0

  Branch

  Peer IP: 123.123.123.123

  LAN: 192.168.1.0/24

  Please can someone help me set up the vpn.

  Hello

  This guide covers exactly what you need:

  Establishment of ASDM and SDM - http://www.netcraftsmen.net/resources/archived-articles/273.html

  Tunnel VPN - ASA to the router configuration:

  http://www.Cisco.com/en/us/products/ps5855/products_configuration_example09186a0080a9a7a3.shtml#ASDM

  Kind regards

  Jimmy

• 2600 router: faced with setting up the accounts user and AAA

  I use SDM to configure easy VPN connection and being a newbie I'm fighting with AAA and the creation of the necessary user account. The SDM Assistant said I must have active AAA and a user account. I found this doc from Cisco using google:

  http://www.Cisco.com/en/us/docs/iOS/12_2/security/configuration/guide/scfathen.html#wp1000971

  and following the instructions, I entered these commands in the cli:

  Router (config) #aaa new-model

  Router (config) #aaa authentication login default local

  but my normal connection and the user name and password do not work in the CLI as soon as I did it. I have the router powerdown and restart it to retrieve the control.

  To be honest, I found things really hard Cisco instructions, I don't understand method-list RADIUS Kerberos GANYMEDE stuff so I was wondering if there was simple instructions there to set up the user account necessary to go forward with the vpn Wizard easy in SDM.

  Thanks for the pointers.

  Hello Anthony,.

  Once you enable the aaa new-model, all applied to the invalid lines previous authentication mechanisms. That's why you should do one of the following values

  Do not issue 'aaa authentication login default local' or if you are forced by SDM, or create a username for yourself with high private, because this command will effect console or VTY lines that their authentication is left by default and require the username and password each time you connect, or you can create a list that has 'no' as a method and apply to the console line to ignore the console authentication.

  username anthony priv 15 password xxxx

  Once you enter a username as shown above, you can connect via the console with this username and pass if "aaa authentication login default local" is issued.

  RADIUS and Ganymede methods are servers that has the ability to contain the names of users with more advanced configurations. For simple authentication, you can use local authentication, this is why you should not mess with Radius or Ganymede at the moment.

  Concerning

• Why the old version of Flash made stay after downloading the new version?

  I downloaded the latest version of Flash, but the old version remained in my modules. I tried to deactivate the old version, but both versions have shown as disabled? Should I leave the two versions that enabled?

  Hello

  Go to your message control and uninstall the old version or uninstall both and reinstall the new version:

  • http://get.Adobe.com/flashplayer/
  • How to uninstall plugins

• How to move from the old iMac, iMac (24-inch mid 2007) to the new

  Got an iMac (24-inch mid 2007), and the desire to buy a new... How to transfer from 'old' iMac again?

  You will have the option to do so when you set up the new iMac; He can run through a network, external drive or disc mode target.

  (140878)

• How to convert the old sync key (12 characters, no dashes) to the new sync key (31 characters, 5 dashes)?

  My sync key was of 12 characters, no dashes (xxxxxxxxxxxx). After uninstalling and reinstalling FF 3.6.13, Sync 1.6.1 refuses my sync key to 12 characters.
  I discovered, that the keys of synchronization for all users have been activated to 31 characters including 5 dashes (x-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx). How can I get the new key for synchronization?
  I have no PC connected to Firefox Sync more but Firefox Home and 360 browser on my iPhone successfully sync. Unfortunately on the iPhone I can't display the sync currently used key. Is there a way to convert the old key to sync to the new?
  I need the bookmarks saved in my sync account.
  Thanks for your help!

  I had the same exact symptoms as you did. Here is my solution:
  I installed an older version of firefox sync (1.4.something, I think) and then added my account using my old short firefox sync key. When you try to synchronize, the out of date addon says to do synchronization, it must be updated. After update, I always signed, but now had the additional device to see my new long firefox sync key that was compatible with FF 4 b, etc. Everything works fine now and my computer is properly synchronize.

• OLD DRIVE DATA ACCESS DENIED WHEN ENSLAVED TO THE NEW SYSTEM

  Hi all

  HD failed a friend into her laptop, but after he enslavement to my laptop I was able to recover all of its intellectual property. I've moved all its directory tree original Windows in its own folder on the same drive. This thing any way that he place the disk would not mingle with old data.

  Since he has already replaced the drive into his laptop, I decided to use the old drive as additional external storage by placing it in a USB connected housing, he would not have to reformat the drive until he was able to cross [on their own] and make sure he got everything.

  When I connect the drive to my laptop I have total rights.

  When he connects to his laptop computer, some files [most] are not accessible; that he doesn't have rights to other accounts that have been created when it was his key motivation.

  I think that since it has USER rights on his laptop [it has a computer programmer who don't give him Admin rights] and it's practically the same configuration, except for the new drive, these files on the old HD are always locked by administrator rights, even if the drive is now only used for additional external storage.

  Question [finally]:

  Is it possible to remove/unlock the Admin rights for accounts that were created when the disk is the disk to boot Windows?

  Kind regards!

  To give the control is a two-step process. Take ownership and then to give permissions.

  Owner of a file allows the owner to change permissions even if they do not have the authorization to do so. It's the only thing that made property. The person who creates an object owns the object. For admins, the objects that are created are the property of administrators, not the individual.

  Administrator more common and more powerful special power is to take ownership of objects, that they were not allowed to.

  You need start exploring as administrator to Start - All Programs - Accessories - made Windows Explorer right click and choose run as administrator.

  He must right click files/disc interested - Properties - Security - Advanced button - property tab - Edit - tick Replace owner on Sub containers and objects button - select a user (should be group of administrators or yourself) - then Ok your way out.

  Now, you give permission to access the files.

  Right-click new - folder Properties - Security - Advanced - tab permissions - Edit button - select the account - check the two checkboxes - button - button Advanced - Search now button Add - select yourself or your want to have ticks - Ok button - group full control access in the list. OK your way out.

  
   

• Old laptop died in place of Photoshop on the new computer

  My old laptop is eventually died, I have photoshop but its maybe 2 years (less than a year) but I don't want to buy or renew photoshop if I can still use my old one on a new laptop but I know that Adobe hates it when photoshop is downloaded on computers has more then a few. What is the best thing to do? Thank you

  What version of PS do you have? If you have CS6, or earlier, you need to contact Adobe to reset your license. If you have CC, you just reinstall the application manager, and then install the PS.

• After you disable CS6 license on the old iMac, SN license won't work on the new iMac, please help

  Have a creative suite standard CS6, get rid of the old mac now. Had disabled the SN on old Mac. When I install the suite on the new iMac, it does not accept the SN.

  Only got 7 days lying around, please help. Thank you!

  Jerry

  Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  -http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

  - and http://forums.adobe.com/thread/1038761

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• What is the right way to migrate from the PS CS5 and LR5 from my old Mac Pro to my new iMac 5 k?

  I am ready to migrate my boot drive for the new iMac and I worry about the right way to take my Adobe Ps and Lr, Br on the new computer. I migrate disable on the old machine, or disable and remove and reinstall on the new iMac? I don't want to spoil!

  Yes, you can install from your original discs as well.

• Photoshop CS computer old trashed, want to install my Photoshop on the new computer

  My old computer was destroyed by a fire and I would like to install Photoshop we had on this subject on my new computer

  If you really want to tell the original Photoshop CS, then you will need to download a new version of Adobe that doesn't require activation.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://www.Adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads

  You will also need to use the new serial number provided at this link.

  This is for Windows.

  If you are on a Mac, I don't think that these older PPC versions will run on the new Mac Intel processor.

• My old Minolta A-type bayonet lenses will fit the Sony Alpha and the Nex cameras?

  I have an old minolta slr camera if Qt I bought different for glasses.  I would like to know if they will fit the new Sony Alpha and Nex cameras?  Please notify.

  A type bayonet mount are compatible with our current SLT models. THE EA3 / EA4 THE adapter will be required if you plan to use these lenses with a horse E NEX camera.

  Information on compatible Konica Minolta lenses for Sony devices on this link.

  If my post answered your question, please mark it as "accept as a Solution.

• Adobe does not recognize that I uninstalled CS on the old computer, will not let me turn on the new computer

  Adobe does not recognize that I uninstalled CS on my old computer, will not let me activate it on the new computer.

  Yes, uninstall is not the same as disabling. Call support to reset the activations.

  Mylenium

• Adding old hard drive temporarily to transfer files to the new computer

  I recently bought a new dell inspiron 530 with windows vista. and I wanted to transfer files from my old drive (my old computer) hard the new hard drive on the new computer.

  the old hard drive is 40 GB maxtor d740x - 6L.  the maxtor SN is 362203022404

  I know how the food.  and I'm pretty sure that the configuration jumper is set to cable select for master / slave.