VPN question, can connect, but can, t go anywhere

Similar Questions

• Cisco vpn client to connect but can not access to the internal network

  Hi all

  I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network

  Any help would be much appreciated.

  Hi Samir,

  I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

  (The link above includes split tunneling, but this is just an option.

  Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.

  Let me know if this can help,

  See you soon,.

  Christian V

• Remote access VPN client to connect but cannot ping inside the host, after that split tunnel is activated (config-joint)

  Hello

  I don't know what could be held, vpn users can ping to the outside and inside of the Cisco ASA interface but can not connect to servers or servers within the LAN ping.

  is hell config please kindly and I would like to know what might happen.

  hostname horse

  domain evergreen.com

  activate 2KFQnbNIdI.2KYOU encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  ins-guard

  !

  interface GigabitEthernet0/0

  LAN description

  nameif inside

  security-level 100

  192.168.200.1 IP address 255.255.255.0

  !

  interface GigabitEthernet0/1

  Description CONNECTION_TO_FREEMAN

  nameif outside

  security-level 0

  IP 196.1.1.1 255.255.255.248

  !

  interface GigabitEthernet0/2

  Description CONNECTION_TO_TIGHTMAN

  nameif backup

  security-level 0

  IP 197.1.1.1 255.255.255.248

  !

  interface GigabitEthernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  Shutdown

  No nameif

  no level of security

  no ip address

  management only

  !

  boot system Disk0: / asa844-1 - k8.bin

  boot system Disk0: / asa707 - k8.bin

  passive FTP mode

  clock timezone WAT 1

  DNS server-group DefaultDNS

  domain green.com

  network of the NETWORK_OBJ_192.168.2.0_25 object

  Subnet 192.168.2.0 255.255.255.128

  network of the NETWORK_OBJ_192.168.202.0_24 object

  192.168.202.0 subnet 255.255.255.0

  network obj_any object

  subnet 0.0.0.0 0.0.0.0

  the DM_INLINE_NETWORK_1 object-group network

  object-network 192.168.200.0 255.255.255.0

  object-network 192.168.202.0 255.255.255.0

  the DM_INLINE_NETWORK_2 object-group network

  object-network 192.168.200.0 255.255.255.0

  object-network 192.168.202.0 255.255.255.0

  access-list extended INSIDE_OUT allow ip 192.168.202.0 255.255.255.0 any

  access-list extended INSIDE_OUT allow ip 192.168.200.0 255.255.255.0 any

  Access extensive list permits all ip a OUTSIDE_IN

  gbnlvpntunnel_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0

  standard access list gbnlvpntunnel_splitTunnelAcl allow 192.168.202.0 255.255.255.0

  gbnlvpntunnell_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0

  standard access list gbnlvpntunnell_splitTunnelAcl allow 192.168.202.0 255.255.255.0

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  backup of MTU 1500

  mask of local pool VPNPOOL 192.168.2.0 - 192.168.2.100 IP 255.255.255.0

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm-645 - 206.bin

  don't allow no asdm history

  ARP timeout 14400

  NAT (inside, outside) static source NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination

  NAT (inside, backup) static source NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination

  NAT (inside, outside) static source DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination

  NAT (inside, backup) static source DM_INLINE_NETWORK_2 DM_INLINE_NETWORK_2 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination

  !

  network obj_any object

  dynamic NAT interface (inside, backup)

  Access-group interface inside INSIDE_OUT

  Access-group OUTSIDE_IN in interface outside

  Route outside 0.0.0.0 0.0.0.0 196.1.1.2 1 track 10

  Route outside 0.0.0.0 0.0.0.0 197.1.1.2 254

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  Enable http server

  http 192.168.200.0 255.255.255.0 inside

  http 192.168.202.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  monitor SLA 100

  type echo protocol ipIcmpEcho 212.58.244.71 interface outside

  Timeout 3000

  frequency 5

  monitor als 100 calendar life never start-time now

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  backup_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  backup of crypto backup_map interface card

  Crypto ikev1 allow outside

  Crypto ikev1 enable backup

  IKEv1 crypto policy 10

  authentication crack

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 20

  authentication rsa - sig

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 30

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 40

  authentication crack

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 50

  authentication rsa - sig

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 60

  preshared authentication

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 70

  authentication crack

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 80

  authentication rsa - sig

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 90

  preshared authentication

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 100

  authentication crack

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 110

  authentication rsa - sig

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 120

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 130

  authentication crack

  the Encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 140

  authentication rsa - sig

  the Encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 150

  preshared authentication

  the Encryption

  sha hash

  Group 2

  life 86400

  !

  track 10 rtr 100 accessibility

  Telnet 192.168.200.0 255.255.255.0 inside

  Telnet 192.168.202.0 255.255.255.0 inside

  Telnet timeout 5

  SSH 192.168.202.0 255.255.255.0 inside

  SSH 192.168.200.0 255.255.255.0 inside

  SSH 0.0.0.0 0.0.0.0 outdoors

  SSH timeout 15

  SSH group dh-Group1-sha1 key exchange

  Console timeout 0

  management-access inside

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal group vpntunnel strategy

  Group vpntunnel policy attributes

  Ikev1 VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list vpntunnel_splitTunnelAcl

  field default value green.com

  internal vpntunnell group policy

  attributes of the strategy of group vpntunnell

  Ikev1 VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list gbnlvpntunnell_splitTunnelAcl

  field default value green.com

  Green user name encrypted BoEFKkDtbnX5Uy1Q privilege 15 password

  attributes of user name THE

  VPN-group-policy gbnlvpn

  tunnel-group vpntunnel type remote access

  tunnel-group vpntunnel General attributes

  address VPNPOOL pool

  strategy-group-by default vpntunnel

  tunnel-group vpntunnel ipsec-attributes

  IKEv1 pre-shared-key *.

  type tunnel-group vpntunnell remote access

  tunnel-group vpntunnell General-attributes

  address VPNPOOL2 pool

  Group Policy - by default-vpntunnell

  vpntunnell group of tunnel ipsec-attributes

  IKEv1 pre-shared-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns migrated_dns_map_1

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the migrated_dns_map_1 dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  call-home

  Profile of CiscoTAC-1

  no active account

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:7c1b1373bf2e2c56289b51b8dccaa565

  Hello

  1 - Please run these commands:

  "crypto isakmp nat-traversal 30.

  "crypto than dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 Road opposite value.

  The main issue here is that you have two roads floating and outside it has a better than backup metric, that's why I added the command 'reverse-road '.

  Please let me know.

  Thank you.

• Get VPN client to connect, but request timed out when ping

  Hi, I use the router Cisco 837 as my VPN server. I am connected using Cisco VPN Client Version 5. But when I ping the ip of the router, I have request timed out. Here is my configuration:

  Building configuration... Current configuration : 3704 bytes ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname michael ! boot-start-marker boot-end-marker ! memory-size iomem 5 no logging console enable secret 5 $1$pZLW$9RZ8afI8QdGRq0ssaEJVu0 ! aaa new-model ! ! aaa authentication login default local aaa authentication login sdm_vpn_xauth_ml_1 local aaa authorization exec default local aaa authorization network sdm_vpn_group_ml_1 local ! aaa session-id common ! resource policy ! ip subnet-zero no ip dhcp use vrf connected ip dhcp excluded-address 192.168.1.1 ! ip dhcp pool michael    network 192.168.1.0 255.255.255.0    default-router 192.168.1.1    dns-server 202.134.0.155 ! ip dhcp pool excluded-address    host 192.168.1.4 255.255.255.0    hardware-address 01c8.d719.957a.b9 ! ! ip cef ip name-server 202.134.0.155 ip name-server 203.130.193.74 vpdn enable ! ! ! ! username michael privilege 15 secret 5 $1$ZJQu$KDigCvYWKkzuzdYHBEY7f. username danny privilege 10 secret 5 $1$BDs.$Ez0u9wY7ywiBzVd1ECX0N/ ! ! ! crypto isakmp policy 1 encr 3des authentication pre-share group 2 crypto isakmp xauth timeout 15 ! crypto isakmp client configuration group michaelvpn key vpnpassword pool SDM_POOL_1 acl 199 netmask 255.255.255.0 ! ! crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac ! crypto dynamic-map SDM_DYNMAP_1 1 set transform-set ESP-3DES-SHA ! ! crypto map SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1 crypto map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1 crypto map SDM_CMAP_1 client configuration address respond crypto map SDM_CMAP_1 65535 ipsec-isakmp dynamic SDM_DYNMAP_1 ! ! ! interface Ethernet0 description $FW_INSIDE$ ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly ip tcp adjust-mss 1452 hold-queue 100 out ! interface Ethernet2 no ip address shutdown hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto pvc 0/35   pppoe-client dial-pool-number 1 ! ! interface FastEthernet1 duplex auto speed auto ! interface FastEthernet2 duplex auto speed auto ! interface FastEthernet3 duplex auto speed auto ! interface FastEthernet4 duplex auto speed auto ! interface Virtual-PPP1 no ip address ! interface Dialer1 description $FW_OUTSIDE$ mtu 1492 ip address negotiated ip nat outside ip virtual-reassembly encapsulation ppp dialer pool 1 ppp chap hostname ispusername ppp chap password 0 isppassword ppp pap sent-username ispusername password 0 isppassword crypto map SDM_CMAP_1 ! ip local pool SDM_POOL_1 192.168.2.1 192.168.2.5 ip classless ip route 0.0.0.0 0.0.0.0 Dialer1 ip http server no ip http secure-server ! ip nat inside source static udp 192.168.1.0 1723 interface Dialer1 1723 ip nat inside source static tcp 192.168.1.4 21 interface Dialer1 21 ip nat inside source route-map SDM_RMAP_1 interface Dialer1 overload ! access-list 1 remark SDM_ACL Category=16 access-list 1 permit 192.0.0.0 0.255.255.255 access-list 102 remark SDM_ACL Category=2 access-list 102 deny   ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255 access-list 102 permit ip 192.168.1.0 0.0.0.255 any access-list 199 permit ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255 route-map SDM_RMAP_1 permit 1 match ip address 102 ! ! control-plane ! banner motd ^C Authorized Access Only UNAUTHORIZED ACCESS TO THIS DEVICE IS PROHIBITED You must have explicit permission to access this device. All activities performed on this device are logged. Any violations of access policy will result in disciplinary action. ^C ! line con 0 no modem enable line aux 0 line vty 0 4 ! scheduler max-task-time 5000 end
  
  Thank you, anny help will be appreciated.
  			 
  Hi Michael,
  I have been through the newspapers, they are not conclusive and only detrmine that Phase 1 is coming. However according to this error message % SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr = 81B50AD8, count = 0 we are hiiting a bug on ios. The id of the bug is CSCsl24693 and the solution is to switch to 12.4 (11) XJ.
  Can you re-execute him debugs and send me the detailed results.
  Kind regards
  Aman
  		   

• Remote VPN connected but do not go anywhere.

  within the network - ASA5505 = internet = remote VPN client.

  The ASA has a public IP address on the external interface and using PAT to the internet. He has only two interfaces, both inside and outside using the vlan. I created an IPSec VPN through CLI. My goal is for the remote client through the tunnel to through the Internet.

  Q1: Is it possible?

  Q2: the remote side is connected and has the IP address of the pool, with fact part of the network. But he can do nothing, including the gateway, which is inside the ping interface. I debug him, it shows the ASA receives the ping packets, but it is not send anything to the client. All recommend would be appreciated.

  Thank you

  Han

  Hello

  Can you please paste the result of ipconfig/all here?

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

• VPN connects but can't access internal devices

  Thanks in advance for any help that can be provided.

  I use AnyConnect to create a VPN with an ASA 5505.  Once connected, the client needs to access a device behind a router in 1941.

  Internally, (without using VPN), all my itinerary runs correctly.  My VPN client can connect and when I put a route on my router from 1941, I am able to ping this particular device.  But my VPN client cannot appear ping all the remaining devices on the same internal range as the ASA 5505 or whatever happened on 1941.

  Device far router VPN Client ASA 5505 1941 Workstation

  192.168.201.20---> outside IP x.x.x.x / / internal 192.168.101.1 192.168.101.56 192.168.101.2 / / 192.168.8.1 192.168.8.150

  Client connects and get the IP address of the ASA

  Cannot ping it cannot ping

  Can ping the internal IP address of 1941

  * (after creating a static route)

  I was playing with my setup intensively to try to make this work.  Split tunneling is enabled and is required.

  Here is my current config:

  hostnameMYHOST

  activate mUUvr2NINofYuSh2 encrypted password

  UNDrnIuGV0tAPtz2 encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  switchport access vlan 7

  !

  interface Vlan1

  nameif inside

  security-level 100

  192.168.101.1 IP address 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP x.x.x.x 255.255.0.0

  !

  interface Vlan7

  prior to interface Vlan1

  nameif DMZ

  security-level 20

  IP 137.57.183.1 255.255.255.0

  !

  passive FTP mode

  clock timezone STD - 7

  DNS domain-lookup outside

  the obj_any_dmz object-group network

  192.168.101.0 IP Access-list extended sheep 255.255.255.0 allow all

  192.168.201.0 IP Access-list extended sheep 255.255.255.0 allow all

  tunneling split list of permitted access standard 192.168.101.0 255.255.255.0

  pager lines 24

  Enable logging

  debug logging in buffered memory

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  MTU 1500 DMZ

  mask 192.168.101.125 - 192.168.101.130 255.255.255.0 IP local pool Internal_Range

  IP local pool vpn_pool 192.168.201.20 - 192.168.201.30 mask 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global interface 10 (external)

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 0.0.0.0 0.0.0.0

  NAT (DMZ) 10 137.57.183.0 255.255.255.0

  Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

  Route inside 192.168.8.0 255.255.255.0 192.168.101.2 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  http server enable 64000

  http 0.0.0.0 0.0.0.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  Crypto ca trustpoint ASDM_TrustPoint1

  registration auto

  name of the object CN = MYHOST

  ClientX_cert key pair

  Configure CRL

  string encryption ca ASDM_TrustPoint1 certificates

  certificate 0f817951

  308201e7 a0030201 30820150 0202040f 0d06092a 81795130 864886f7 0d 010105

  05003038 31173015 06035504 03130e41 494d452d 56504e2d 42415455 53311d 30

  1b06092a 864886f7 0d 010902 160e4149 4d452d56 504e2d42 41545553 301e170d

  31333036 32373137 32393335 5a170d32 33303632 35313732 3933355a 30383117

  30150603 55040313 0e41494d 452-5650 4e2d4241 54555331 1d301b06 092 d has 8648

  86f70d01 0902160e 41494d 45 2d56504e 424154 55533081 9f300d06 092 2d has 8648

  86f70d01 01010500 03818d 30818902 00 818100c 9 ff840bf4 cfb8d394 2 c 940430

  1887f25a 49038aa0 1299cf10 bda2a436 227dcdbf f1c5566b c35c2f19 8b3514d3

  4e24f5b1 c8840e8c 60e2b39d bdc0082f 08cce525 97ffefba d42bb087 81b9adb9

  db0a8b2f b643e651 d17cd6f8 f67297f2 d785ef46 c3acbb39 615e1ef1 23db072c

  783fe112 acd6dc80 dc38e94b 6e56fe94 d59d5d02 03010001 300 d 0609 2a 864886

  8181007e f70d0101 05050003 29e90ea0 e337976e 9006bc02 402fd58a a1d30fe8

  b2c1ab49 a1828ee0 488d1d2f 1dc5d150 3ed85f09 54f099b2 064cd 622 dc3d3821

  fca46c69 62231fd2 6e396cd1 7ef586f9 f41205af c2199174 3c5ee887 42b684c9

  7f4d2045 4742adb5 d70c3805 4ad13191 8d802bbc b2bcd8c7 8eec111b 761d89f3

  63ebd49d 30dd06f4 e0fa25

  quit smoking

  crypto ISAKMP allow outside

  crypto ISAKMP policy 40

  preshared authentication

  aes-256 encryption

  sha hash

  Group 5

  life 86400

  Telnet timeout 5

  SSH 0.0.0.0 0.0.0.0 inside

  SSH 0.0.0.0 0.0.0.0 DMZ

  SSH timeout 10

  Console timeout 0

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  SSL encryption rc4 - md5, rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1

  SSL-trust outside ASDM_TrustPoint1 point

  WebVPN

  allow outside

  SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 1 image

  enable SVC

  internal ClientX_access group strategy

  attributes of Group Policy ClientX_access

  4.2.2.2 DNS server value

  VPN-tunnel-Protocol svc

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value split tunneling

  access.local value by default-field

  the address value vpn_pool pools

  IPv6 address pools no

  WebVPN

  SVC mtu 1406

  generate a new key SVC time no

  SVC generate a new method ssl key

  username privilege 15 encrypted password ykAxQ227nzontdIh ClientX

  ClientX username attributes

  VPN-group-policy ClientX_access

  type of service admin

  tunnel-group ClientX type remote access

  attributes global-tunnel-group ClientX

  address pool Internal_Range

  Group Policy - by default-ClientX_access

  type tunnel-group SSLClientProfile remote access

  attributes global-tunnel-group SSLClientProfile

  Group Policy - by default-ClientX_access

  type tunnel-group ClientX_access remote access

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:da38065247f7334a5408b7ada3af29ae

  : end

  OK, lets go on... ;-)

  Split tunneling: the ACL must include all the networks you want to join via the VPN:

  tunneling split list of permitted access standard 192.168.101.0 255.255.255.0

  tunneling split list of permitted access standard 192.168.8.0 255.255.255.0

  NAT: Do not use 'everything' in the nat exemption, but specify all the traffic that should not be natted:

  IP 192.168.101.0 allow Access-list extended sheep 255.255.255.0 192.168.201.0 255.255.255.0

  IP 192.168.8.0 allow Access-list extended sheep 255.255.255.0 192.168.201.0 255.255.255.0

  Routing: The 1941 needs a route for the vpn-pool pointing on the SAA (just in case there is no default route to the ASA)

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• I created a vpn connection, but can I create a shortcut to connect every time?

  I created a vpn connection, but can I create a shortcut to connect every time?

  I created a vpn connection, but can I create a shortcut to connect every time?

  Open network and sharing Center, go to the Edit card settings window and drag the VPN icon on your desktop.

• Unable to access hot mail. can connect but not see e-mail. Works very well with Exployer.

  It is one their recent. Worked well 4 days ago. for the last 3 days that I can go to Windows live (my e-mail account), I can connect, but that's all. When I click on my email, or any tab, tab nothing happens. I can go online with Windows Exployer and it works fine.

  Adblock Plus blocks may be too

  Update your subscriptions in 'Adblock Plus '.

  See "What to do when Adblock Plus blocks too" breast of the following:

  • https://support.Mozilla.com/en-us/questions/893525

• QuickVPN connected, but I can't do anything on the LAN ping

  Hi all

  I try to use QuickVPN to connect to my corporate network. Yesterday I was to the point where QuickVPN actually connected and I could connect to the router from inside IP. But I can't see, or ping all computers on the LAN to company. Manual of the router says '' customer QuickVPN may access only the default LAN hosts. ''. Are the computers of the default of the company LAN LAN hosts?

  I added the router (RV220W) to the existing company LAN to test QuickVPN. The company LAN has a Small Business Server as a DHCP server and another router as the default gateway. The company LAN the subnet 192.168.1.0/24*, the cisco wan router has the subnet 192.168.103.0/24 and my VPN client is connected to a hotspot wifi with the same wan and LAN 192.168.3.0/24. The LAN of the cisco router address is 192.168.1.1.

  * I know now, 192.168.1.0/24 is the worst possible choice for a net business, but I didn't when I installed the Small Business Server. I'll try to change it to something like 10.123.45.0/24 later.

  Thanks in advance
  Mike

  

  Hello

  You can reach a PC in the LAN of RV220, because the default gateway is not RV220.

  This is what happens: the PC with fast VPN (for example IP: 192.168.103.10) is ping a PC with IP 192.168.1.10, via the VPN tunnel. Once the request arrives at the 192.168.1.10 PC, this PC sends the response to its default gateway (because don't have a direct connection to the 192.168.103.X network). If the default gateway is RV220, he'll know that the response should be returned via the VPN tunnel to the customer, but if it's another machine, it will just drop the package.

  In this case this another router (default gateway) must be configured with a static route, saying that subnet 192.168.103.x has as default gateway - 192.168.1.1 (RV220).

  As long as the IP address of the VPN machine fast is the same, it's ok. But if you move this PC to another local network, you will have again the problem.

  So if you plan to change the LAN IP of the fast VPN machine, I recommend using instead the Shrew VPN, where you can configure virtual IP on the client, that does not need to change.

  Kind regards

  Bismuth

• Two accounts on laptop, one another ok can connect but not acess anything (o/s win 8)

  I have a friend at work, the user account of whose son works well but whose own user account does not work. It can connect, but then the screen seems to keep refreashing. The taskbar appears as a bar grey which appears and disappears in time with its store of ms, desktop and icons to help hp, this happens so fast that it is impossible to click on the desktop icon / pic to enter his office. I guess that he messed up his account settings. R it y of drastic solutions - no obviouse. TIA

  Hello

  Given that the other account works fine, I think the user in question account is corrupted.

  If the issue occurred recently, then you can try using System Restore and check if that helps.

  Performing a system restore returns the system files and settings previously uncorrupted State.

  How to restore, refresh or reset your PC

  Ignore: Refresh and reset of the above article.

  The best way will be to create a new user account and start again.

  Visit this link to learn more about creating a new user account in Windows 8.

  It will be useful. Please let us know the results.

• I did an extra e-mail for my partner account. We read emails when I am connected, but she can't read them when it is recorded.

  I did an extra e-mail for my partner account. We read emails in our two accounts when I am connected, but she can't read his email, if it is logged in and of itself. How can we make accessible account directly for her?

  deleted

• is there a website that gives updates on the mac applications. I already asked this question and responded, but I can't find him.

  is there a website that gives updates on the mac applications. I already asked this question and responded, but I can't find it (if you know how to find old questions of your s that tell me - nobody else had asked this question). There are Web sites for ipad/iphone applications. It gives update on prices, sometimes, when I am lucky that I find very good apps that break free.

  The site you are after may be https://roaringapps.com/

  If you want to check what discussions you participated in

  Click on content at the top of the communities of Apple Support page (you must be logged in).

  You will see a list on the left, including Authored, etc. participated.

• BRAVO: Wifi connects but can't reach Internet

  Just recently my Wifi stopped working properly, anywhere except for home. The phone displays an active Wifi connection, but I can't get anywhere. It still works fine on my Wifi at home. I did not any changes to settings and it is always set to use DHCP to get an IP dynamic task. I tried to have the phone "forget" a network and it relearn, but which did not help. Any suggestions?

  Thank you - dcedte

  Deletion (aka. "forgetting") the unsecured Wifi networks 'remember' solves the problem. When the phone connects again to these networks, it works now.

  dcedte

• am getting only a few wifi I do not receive my freewifi company, I was gettig 2 days before now I can't connect, but my roommate can connect

  am getting only a few wifi I do not receive my freewifi company, I was gettig 2 days before now I can't connect, but my roommate can connect

  Hi Vijay,

  1. have you made changes on the computer before this problem?

  2. you receive an error message or error code?

  This problem can occur because network settings, refer to the steps in the following Microsoft article and check.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2: http://support.microsoft.com/kb/870702

  Manage your network connections: http://windows.microsoft.com/en-in/windows-xp/help/networking/manage-network-connections

  To set up automatic wireless network configuration: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  Hope that the information provided is useful.

• WiFi is connected but I can't connect to the net, what to do?

  WiFi is connected but I can't connect to the net, what to do?

  Hi Torrespa,

  1. what happens when you try to connect to the internet?

  2. were you able to use the Wi - Fi connection earlier?

  3. what brand & model of network card?

  You can follow this link & check if the problem persists:

  How to fix wireless network connections in Windows XP Service Pack 2?

  
  Reference: Wired and wireless in Windows network connection problems

   To set up automatic wireless network configuration

  Hope the helps of information.