VPN work but I can not access pass

Similar Questions

• Computer shows as connected... but we can not access the internet.

  Original title: but alas... internet no.

  Recently, we had this problem where our shows as connected pc... but we can not access the internet.  What I've been able to solve, is that somehow my IP settings change.

  I'm going to "Obtain an IP address automatically" and "Obtain DNS server address automatically", but of course... when the problem occurs again I find that my "Obtain DNS server automatically an address" has been changed to "use the following DNS server address".

  What is causing my computer to change my settings?

  I think you're DIY too.  Normally, your computer and your wireless router assign dynamic IP addresses, and they change periodically - that is part of the security design.

  In your case, the DNS server is the router.

  Most of the time what you describe is your computer is able to find a wireless router but the router doesn't send an IP (its normal function).

  This is usually:

  1. Your Internet service provider is down or your connection to it is broken.  If this is the case there is nothing you can do about it.
  2. Your computer network security key does not match the one in the router.

  1 reset the modem & router.  Follow these instructions precisely: http://canadiantech.info/?page_id=136

  2. If that does not resolve the problem, you must remove this network from your list of networks to manage Windows 7.  Then try to connect again using the network key, you know.

  3. If this does not work, you will need to do a factory reset on the router and re - install the router according to the router set up instructions.

  4. If after all the above does not correct the problem, you must replace your router.

• I need assistance with lightroom 4 - I downloaded the software but I can not access

  I need assistance with lightroom 4 - I downloaded the software but I can't access it. I have windows XP I need to upgrade to windows vista or windows 7? Any help please. Thanks Zara

  Lightroom 4 does not work on Windows XP

  http://www.Adobe.com/products/Photoshop-Lightroom/tech-specs.html

  You will need to upgrade to Windows 7 or Windows 8. Avoid Vista - It's terrible.

• My Belkin router has stopped working. After talking to Belkin support, we got it to work, but I can't access the site of iiNet connection.

  original title: Wireless router problems

  My Belkin router has stopped working the other day, so I tried the usual stuff (turning on an etc) in the end rang Belkin and after about an hour the router started working again, but would go only on the iiNet connection site! Go figure, not even with them. The woman to the Belkin told me to ring my ISP I did, and they got me online, however, my printer, the laptop and the iPhone is no longer will connect wireless. They were all working perfectly before the router dropped out.

  I went through all the procedures that several times. Uninstalled and reinstalled the printer and the router... still does not work.

  The printer can not just to find the wireless network. The test report said that everything went except the SSID, which has been a FAILURE. How can this be when I haven't changed the

  SSID?

  I've updated as well.

  Hoping really frustrated, can someone help!
  Thanks in advance!

  Hello

  1 are there any changes or updates made on the computer before the show?

  2. What is the exact model of the router number?

  3. do you get an error message? If Yes, what is the full and exact error message?

  4. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Check out the links and check if that helps:

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  The link applies to the Windows Vista and Windows 7 operating system.

  Problems of network with a router in Windows XP

  http://support.Microsoft.com/kb/315978

• Hotmail hacked - 4 days blocked account - phone text Reset does not work... can not access account and have talked to 3 people - HELP... my whole company is on this email account!

  my hotmail has been hacked 4 days ago and sent viagra emails. I went in Thursday night to reset the password and then the account has been blocked. Since then, he invites me it will allow me to reset my password by SMS me a code but they NEVER TEXT me the password. then I try to get help via emial online but you must be signed in and of course I can't get because my account is blocked. all my emails work are here and I've had this account since 1998 and I don't remember my secret question. I've been on the phone for an hour with 3 people after trying to bypass automated telephone lines and SOMEONE can help you. I have now got a Hotmail Plus account that I paid for, in the hope that someone might transfer my emails from old account again and PERSON can help you PLEAES PLEAES HELP! why I have not listened to my friends telling me to go to gmail, I'll never know... after 13 years, I thought I was ok... Argh

  Hi CynH_Fort,

  Since you are facing problems with your hotmail account, you can publish your application in the Windows Live forum to get help:

  Windows Live Support

  Compromised account - unauthorized account access

• I am adadministrator but I can not access my computer functions

  2 days ago, I think I've accidentally changed my security settings for my: C drive while checking my computer ( don't know if this is the real reason however). I am the administrator on the computer and there is no other users. whenever I connect it denies access to my characteristics.  on the accounts in the control panel it says that I am administrator but he always tells me that I need to contact my administrator when using functions as the uninstall programs and features.  I ran an avg full deep scan off my computer and his own come so I'm almost certain that this is not a virus.  I'm running Windows Vista Home premium and I've never experienced this before.  whenever I start the computer, it starts to fuck as usual and then I get loads of pop ups for example:

  -Google Installer has stopped working
  -Apple sync notifier "could not start because corefoundation.dll was not found (I've never heard of corefoundation.dll)"
  -browserprotect.exe has stopped working (and whenever I close the pop up back to the top again)
  -When I go to access some of my files and applications it says 'you have insufficient access, please contact the administrator '.
  -When I try to access to my: C drive, it says ' not accessible, access is denied. "
  -When I go to access the features a bit it says "the parameter is incorrect" (not sure what that means)
  I'm usually a computer wiz and use of high-quality software, command prompt and all that, but I have trouble understanding it, so don't you worry I will understand any technical language, thanks :)

  Hi Oliver,

  Exactly how you have changed the security settings for the C: drive?

  Problems to work on files and folders in Windows can be caused by permissions issues, or even corrupt corrupted user accounts.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  "Access denied" or other errors in the access to or work with files and folders in Windows
  http://support.Microsoft.com/kb/2623670#method4

  Method 2:
  If the problem is not resolved, I suggest you temporarily disable the security software and check if it helps.

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  
  Method 3:
  If the problem persists, I suggest you try to run the system restore to point before that the problem began earlier and check if that helps.

  
  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  
  Note: when you do the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Reinstall time for XP but I can not access the IBM Predesktop at startup

  
  

  Better to seek for the partition in disk management service, if you do not see a second partition is not there.

  Yes you can install pretty much the same as any other computer. Installation update system will probably make less stressful work and get all or most of the drivers for you automatically. You must ensure that you have .NET Framework 3.5 installed to make it work properly.

• Data on the iMac, but can not access the files.

  Hi all

  I have a iMac Core 2 Duo (3.33, 21.5 inches) since end 2009, running 10.6.8 Snow Leopard and I'm trying to recover some files that seem to be there, but I can not access it due to an update of the unfinished software.

  A few years back, I tried the Mavericks update using an external hard drive as the boot drive (at that time there I ran 10.6.7 Lion), installation is never ending and I accidentally deleted this file to start on the outside, so I ended up coming back to his moose BONE, 10.6.8 Snow Leopard.

  He seems to resemble a new install of Snow Leopard, except my old files (about 350 GB) still live on this subject, but I can not access all of the files, or does not even appear in the Finder.

  Would appreciate any advice or tips on how to do to recover my invisible files. Thank you!

  Do you see the drive in disk utility?

  1. Connect the external drive
  2. If it has external power supply, make sure that that is connected
  3. If the external hard drive has a power button, make sure that it is set to
  4. Goto docking station
  5. Click on finder
  6. Goto menu bar
  7. Click the menu go
  8. Choose utility
  9. Double-click disk utility

  The drive will appear in the left column of the disk utility?

  If the answer is Yes, if you click on the drive, and then click on check, what disk utility say?

• Files on the external drive have changed to shortcuts, can not access.

  I click on an element and it says the following to "the item this shortcut referred to in jaemaat.scr has been changed or moved. "so this shortcut will no longer work correctly you want to remove?" but the record still shows the same amount of spaced used as before that the question (32.8 GB used from 265 GB). I clicked to display hidden files as shown here, but has not seen a virus when I click on new folder. I scanned with Norton and it found 2 problems and fixed but I can not access anything whatsoever. How can I recover my files? Also does it matter if I'm not on the same computer I have initially oploaded files from, he gave me a little old and slow.

  I try on a windows vista computer, my old one was a version of windows 2004

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/files-on-external-drive-have-changed-to-shortcuts/695db4cc-645f-4BD1-85c7-41671457fe11

  It will be useful.

• I can't access my email works through outlook over a VPN. The signin VPN works ok, I can see my network co., but can not use outlook. 'Microsoft Exchange Server' reported an error (0 x 80040115)

  prospects for bt infinity

  I recently changed my home to infinity of BT broadband.  Now I can't access my email works through outlook over a VPN.  The signin VPN works ok, I can see my network co., but can not use outlook.   I get the following error at startup of outlook.

  Task 'Microsoft Exchange Server' reported an error (0 x 80040115): ' the connection to the Microsoft Exchange Server is unavailable.  Outlook must be online or connected to complete this action. »

  Anyone have any ideas?

  Allan M

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Kind regards

  Ramata Thakur

• Cisco vpn client to connect but can not access to the internal network

  Hi all

  I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network

  Any help would be much appreciated.

  Hi Samir,

  I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

  (The link above includes split tunneling, but this is just an option.

  Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.

  Let me know if this can help,

  See you soon,.

  Christian V

• I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office.

  share external hard drive

  I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office. I want to be able to back up my laptop hard disk external.  Advice please.

  geraintjo

  I do not use homegroups, but 'true' to share, so I don't know how this is supposed to work with homegroups. But usually he should share a drive or folder, first before you can access it from another machine. (for example, click on the drive/folder properties and go to the sharing tab)

• After the Windows 8.1 update, can not access Internet in Firefox or Chrome, but IE 11 OK.

  After the Windows 8.1 update, can not access Internet in Firefox or Chrome, but IE 11 OK.
  I reinstalled the latest firefox, still cannot access Internet from Firefox.
  Microsoft is ridiculous?

  1. Run cmd.exe as administrator
  2. Type "netsh winsock reset" and then press enter
  3. Restart the PC

• I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?

  I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?

  Macbeth,

  From your description, it appears you are trying to get your mail using Safari to access your e-mail account. Why you do not use the Mail App?

  http://www.Verizon.com/cs/groups/public/documents/adacct/Setup-email-mobile-Devi Ed.pdf

  

• Tecra M5: Can not access the internet pages, but can ping in cmd.exe

  Hi all, this is confusing to me.

  I've been happily connected to my WLAN for more than a year without any problems. I recently updated my drivers for the following on my Tecra M5:

  -Intel Pro Wireless adapt
  -Drivers audio Sigmatel
  -nVidia graphics card

  Now, after facilities, everything was fine. However, a few days later, I turned on the laptop and went to IE7 and it cannot display the web page (my homepage is www.google.co.uk). I called my ISP to help and they reported problems on the service, and they gave me the www.google.co.uk ip address I got a response of in cmd.exe. It seems that I can get out on the internet but I can't access the Web pages - it could be a DNS issue?

  I have disabled my A - V and firewall and tried but get the same question. I also tried to restore the PC back more than a month and it did not help either. I'd appreciate any help that anyone can give.

  I also plugged the laptop directly into the router using an ethernet cable, so it's not only a wireless issue either.

  I have installed any other software at all at the moment and the only other thing that got my attention, it's that, in the field of restoration, there a lot of system restore points, which I wasn't expecting to see in the last month. But it could be a Kipper.

  Thank you very much

  MARC

  Hello

  According to your message, you are not able to connect to internet via LAN and WLan. Is this good?

  Well, in your case I would first check the router settings and re still.
  In addition, you must reset the router.

  Usually, the router assigns the IP address, and therefore you would just plug the laptop LAN cable and then should be able to connect to the internet.
  Please note that the TCP/IP protocol settings must be set to automatic.

  Check everything first!