vRA 7 Installation Wizard Prerequisite Checker issues

Similar Questions

• VRA 7 Installation Wizard stuck on "Waiting for host Trigger Prerequisite Check"

  I'm trying to use the vRA Installation Wizard 7 and continues to stop on this control with this message: "Waiting for host Trigger Check condition" - it will stay there for hours without doing anything.  Any ideas?  I tried to add a manual entry in the hosts to the IAAS system file.  Any other ideas?

  Maybe a stupid question, but you have installed on the servers IaaS management agents?

  Grant

• vRA 7 installation wizard stops at the validation

  Vallidation stage, the wizard stops... growth remains at 0%; Next button is dimmed; If click on validate button, screen even with 0% progress.

  tried on another host that is the same;

  any tips?

  THX

  Tom

  After carefully checking the infra, it turns out that the DNS is the problem;

  Thank you!

• 7 - installation wizard - vRA Validation step is suspended forever

  I'm turning a CEP of vRA 7. I have deployed the device, installation of the host Windows IaaS in accordance with documented requirements. I do a minimal installation, the Installation Wizard without no problem went through all the way to the stage of 'Validation '. Once here, I click on validate and pops up the message "Validation is ongoing." However, nothing else happens. It remains at 0%, there is virtually no CPU activity or network on the device or the host IaaS. I let it sit for more than 10 hours, nothing. I tried to restart the device and the host, returned to the Validation step (progress has been made, fortunately) but still have the same problem. I have never a timeout or error messages, just, it is there and does nothing. I can click on the "previous" button, navigate backward in the wizard as usual, even change values or re - generate certificates, etc. I can't spent (or even in) Validation... Anyone else seen elsewhere, or have any suggestions? I think I might just to redeploy the device, but I don't feel confident that will make a difference at this point.

  I found myself redeploy the unit without success. I tried and then run the Installation Wizard directly from the host Windows IaaS, which, for some reason, has worked. My device and host IaaS are in the same subnet with no firewall between them (Windows Firewall disabled on the host computer.) I had even not looked through the logs on the IaaS host to see if there was security policies preventing the execution tasks, but could find nothing to even indicate that everything had been tried. Don't dig into the unit logs, so I don't know what I have found it. I don't know why it did not work from another computer virtual on the same subnet, running the same operating system and browser, etc.. I would have probably tried run from another machine over early the Wizard don't seemed to work perfectly... In any case, all is well now.

• HP installation wizard hangs in Mavericks (OS 10.9)

  I need a version of the HP installation wizard that doesn't crash in Mavericks, so I can set up my printer with my new router wireless. This printer (HP Officejet Pro 8000 A809) works well with the Mavericks on my old wifi network. But my DSL provider just installed a new router, so I have a new wifi network which also works fine with everything else.

  Now I need a way to set up my printer on the network, because the installation wizard hangs in the Mavericks. Is there an updated version of the installation wizard that works with the Mavericks? I looked, but can't find any info.

  Thanks for any help you can provide.

  Bruce777 solved this problem for me, thanks Bruce! My printer now works perfectly on my new wifi network!

  Bruce instructions, for anyone else having the same issue:

  -delete all printers already implemented

  -Rub old hp software and updated software for the hp 2.8 drivers

  -Unplug the usb cable from the printer if you have connected

  -restore the network printer hpsetup (hold down the power button / stop and press the button x 2 network and then cancel 3 x, release power button).

  -Print the wireless network test report (hold down the button to network and update support 2 x). Check the ssid network name is hsetup

  -arrived in sys prefs > network and change the mac to hpsetup wireless network

  -go to the sys pref > print scanning

  -Add the HP 8000 printer

  -Click the supplies button and options and click on the printer to show Web page

  -Click on the Networking tab > wireless in the left pane > start networking wizard and change the network of hpsetup to your network

  -finishing (this page may freeze.  Close the browser)

  -Return to the sys prefs and change the network wireless to your networt

  -go to the printer and print the wireless network test report (updated 2 x key and press the network button).  Make sure that the SSID is your network

  -go to system prefs > print scan > select your printer > options & supplies > see the printer Web page > network info (check ssid and compare it to the wireless network test report)

  -try to print something on your printer.  It might take a bit of time first impression.

• Installation Wizard is unable to detect my print server

  Hi, I just bought a print server WPSM54g, I have ejecuted the installation wizard and I'll put up the product for the first time. In step 6, that the wizard does not detect the print server and I can't go any further with the installation.

  I downloaded the new version of the wizard, but the same problem appeared.

  I will appreciate if someone can help me solve this problem. I am running Win XP SP3, the printer is an Epson CX3900 Multiuse (latest drivers installaded) and I have a Linksys WRT54g wireless router.

  Thanks in advance.

  Connection: Printer ==> ==> router print server... Make sure that your printer drivers are installed...

  Check the settings of your wireless router wireless, follow the link here

  (1) for the installation of the print server, open your router configuration, click on the 'Status' tab and go the 'Local area network', under LAN sub-tab click DHCP Client table and find the IP address of the print server...

  (2) enter the IP address in the IE address bar and press ENTER, it should encourage user and the password for the print server... Enter the default admin password (if you have changed the password enter the password), and then click OK... You shoul see the configuration of the print server page...

  3) click on the Wireless tab and enter your network name/SSID and WEP/WPA security settings... Make sure you have wireless settings are identical on both devices (router and print server), if they are not identical, they communicate... Save the settings once...

  4) click the Protocol tab and select use the following IP address and enter IP address: 192.168.1.70(assuming votre routeur est 192.168.1.1) subnet mask: 255.255.255.0 Gateway: 192.168.1.1 and click Save...

  (5) wait 30 seconds and close IE and re - open, see if you can open the configuration of the print server with it of new IP Address (192.168.1.70) and click OK... Double check the wireless settings and see if it matches your router...

  (6) disconnect the Ethernet cable from your router to your print server... Unplug the power cable from printing to serve, wait 30 seconds, unplug the power cable from the router, wait 30 seconds, connect the power cable to your print server, wait for 30 seconds and connect the power cable to your router... Your print server must be configured by here...

  (7) to double check open th IE and enter the IP address of the print server and see if you can get to the configuration page... If so, your print server is configured... If this is not the case, see step 3...

  (8) now to launch the CD and select Computer Configuration and follow the instructions (if you are prompted for any IP address, remember to enter the IP address of the printer server)... Once this is done... restart the computer and see if you can print... Run the CD on the rest of the computer from where you need to print...

• WES7: 'Windows cannot access the installation sources. "Check that the installation sources are accessible and restart the installation.

  I try to install Windows Embedded Standard 7 on an vacuum Compact Flash 4 GB but when installing, I get an error message "Windows cannot access the installation sources. "Check that the installation sources are accessible, and run the Setup again."

  I created an answer file with the Configuration of Image Editor and I created an Image of the IBW of my answer file. All the files and the Image of the IBW (738 MB) files are copied to a USB bootable 4 GB. I inserted the Flash DRIVE to a computer with a Compact Flash 4 GB (which contains only a primary NTFS partition set as Active) and it starts on a USB key. IBW Wizard starts and I followed the instructions until the disk selection step. I chose the disk and partition of Compact Flash and I press the next button. First 2 installation steps manage (copy of Windows files and extend Windows files) but 3rd step (installing features and updates) failed with the error message "Windows cannot access the installation sources. Check that the installation sources are accessible, and run the Setup again.'.»

  I tried to do the same thing with a Compact Flash 4 GB, which contains 2 partitions: a primary NTFS defined as active and a system partition, but I got the same result. Then I tried to install it on a Compact Flash 8 GB which contains 1 single defined primary partition as active and I managed.

  Problem is that I must install on a Compact Flash 4 GB.

  Can someone help me please?

  For Windows Embedded-related problems, please post in the forum on TechNet:

  http://social.technet.Microsoft.com/forums/en-us/category/windowsembedded

• I just bought the edition student pro Adobe Acrobat XI from amazon. The installation wizard does not recognize my valid serial number. I entered it with and without a hyphen. What should I do?

  I just bought the edition student pro Adobe Acrobat XI from amazon. The installation wizard does not recognize my valid serial number. I entered it with and without a hyphen. What should I do?

  Is the serial number a 24 digit code?

  It is best to contact the Support from Adobe and check with the serial number once:

  "Click the button still needing help, and then select the Chat option:

  https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_account-settings _stillNeedHelp

• the prerequisite check fails on oracle linux 6-> oracle 11.2

  Hi guys,.

  I try to install oracle on oracle linux 11.2 6

  I get via oracle-rdbms-server-11gR2-preinstall-verify yum and no warnings are triggered.

  If I try to download all packages via yum manually asked as a prereq, yum response that everything is kept up-to-date to the latest version (with the exception of pdksh, present in the repository more...).

  When I run the Setup, the prerequisite check fails!

  Here the Setup log. I post only for libaio but is not the only one (glibc, odbc, pdksh)

  INFO: INFO: package: libaio - 0.3.105: it is a precondition to check if the package "libaio - 0.3.105" is available on the system.

  INFO: INFO: gravity: IGNORABLE

  INFO: INFO: OverallStatus:VERIFICATION_FAILED

  INFO: INFO: -----------------------------------------------

  INFO: INFO: results of the verification of node: oraLinux

  INFO: INFO: expected value: libaio - 0.3.105 (i386)

  INFO: INFO: real value: missing

  INFO: INFO: Error Message: PRVF-7532: package "libaio - 0.3.105 (i386)" is missing in the node 'oraLinux '.

  INFO: INFO: Cause: a required package is not installed or if the package is a kernel module, is not loaded on the specified node.

  INFO: INFO: Action: make sure that the perl package is installed and available.

  INFO: INFO: -----------------------------------------------

  INFO: INFO: *********************************************

  INFO: INFO: package: libaio - 0.3.105: it is a precondition to check if the package "libaio - 0.3.105" is available on the system.

  INFO: INFO: gravity: IGNORABLE

  INFO: INFO: OverallStatus: SUCCESS

  INFO: INFO: -----------------------------------------------

  INFO: INFO: results of the verification of node: oraLinux

  INFO: INFO: expected value: libaio - 0.3.105 (x86_64)

  INFO: INFO: real value: libaio - 0.3.107 - 10.el6 (x86_64)

  My packages are too recent?

  If I ignore the errors the installation completed successfully went well. But I wonder if the above errors could be the oracle server is not stable.

  Could someone help?

  Thank you very much

  Andrea

  What exact version of 11 GR 2? Only 11.2.0.3 is currently certified with Linux 6.x - if you use 11.2.0.1 or 11.2.0.2, you should not use Linux 5.x

  HTH
  Srini

• The installation wizard seems to stop

  I'm trying a first installation on a relatively new platform for win7 64 bit. Something about downloads, I wonder for permission to install, to grant him. Installation Wizard opens, decompresses at 60% and disappears. Tried several times, with or without MS security essentials, also in safe mode. Identical results in all cases.

  Can't identify anything in event log associated with Mozzila or Firefox (not familiar with tool). Ran AV and Malware scans.  Nothing.  Don't see anything in Win program removal or Revo Uninstaller to suggest partial installation.
  

  Try running the full installation instead of the Stub Installer

  • FTP://FTP.Mozilla.org/pub/Firefox/releases/28.0/Win32/en-us/
    • Download Firefox Setup 28.0.exe

• Printer Installation Wizard

  Imagine this scenario:

  You just got a new computer with Windows 8.  You open the box and get the unit starts for the first time.  You get the PC to up and go; you look at your reliable HP printer and you decide to get connected to the new PC.  Remember: 'I have a CD that came with the printer' and try to put the disc to load the drivers to go back to feel the needs of the day.  Trying to run the drivers, PC informs you that the drivers are not compatible with this version of the operating system.  What to do now?

  Do not be afraid.  HP has covered you!  Try it HP printer installation wizard.

  Example of the printer Installation Wizard window:

  

  • You have recently installed Windows 8 or upgraded to Windows 8?
  • Do you need to install a HP printer?
  • Do you need to install a HP printer?

  If this is the case, then you have the chance.  HP has built a tool that is able to search, find and install the appropriate drivers full of features for HP printers in Windows 7 and Windows 8.  It is a one-stop shop that will keep you from having to search and find if a driver is available.

  HP printer Installation Wizard can be found by clicking on this link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us & LC = on & JumpID = ex_r4155/HHO/IPG/ccdoc/p...

  There is a large document with instructions step by step how the wizard:

  http://support.HP.com/us-en/document/c02691615

  Good impression!

  I hope this helps.

• Installation Wizard downloads and runs the HP printer

  Learn how to download and run the wizard to install printer HP (PIW). Printer Installation Wizard allows to solve many common installation problems, such as finding the correct driver for your printer, using your HP printer the same way that you used with your old operating system. Printer Installation Wizard is not available for all products, only works in Windows 7 and Windows 8, and you connect your printer to your computer with a USB cable to run the wizard. For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support. This video was produced by HP.

  I hope you find this information useful.

• Help with the download installation wizard.

  Hello

  I just got a WRT54G2.  My computer CD players do not work so I try to install the downloadable Wizard. I downloaded it from this page: http://www.linksysbycisco.com/US/en/support/WRT54G2/download

  What I get is a .iso file and I have no idea how do run as an installation wizard program.  I did research for a few hours and I tried some programs, but what they let me do it see files but does not work for the installation wizard.

  How to run the installation wizard the downloaded file only?

  Thank you

  -Pascal

  A .iso file is an image of a CD. Burn it to a cd - r with roxio or nero or other software you are burning. You can also try the magic disc (freeware) that will mount the iso image to a virtual cd drive. Your best best is probably just to burn it to a cd. Hope that helps!

• HP installation wizard cannot find a printer

  I am using HP Photosmart C3100 all-in-One on a MacBook Pro. I reinstalled and tried all the quick fixes, but this remains a problem: while I can print fine from my computer, I can't scan. When I use the HP Installation Wizard, there not my printer.  HP Device Manager also cannot find the printer. Oh, how strange! Any help, people? Thank you!

  We invite you with pleasure

  Please remove the current software that is bundles with 10.6 following Uninstall HP under Applications > Hewlett-Packard.

  Once you have finished restart your Mac, download and install the correct software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77264-1&cc=us&DLC=en&LC=en&OS=219&product=1146331&sw_lang=

  Then, restart your Mac once more and run the software update to ensure that the most current drivers are installed.

  Please let me know of any problems,

  Shlomi

• Installation Wizard gives an error during the installation of update on CS5 CS6

  We are trying to install CS6 on a new windows computer with windows 8.1. We bought a version update for CS5 a couple of years ago and the installation wizard asks CS5 serial number, but when we enter the code, the wizard says serial number does not match the product. We do not know what package it belongs to, but we tried all packages and the error evertime. It did not work on another computer 2 3 years ago, but we don't have access to this device more. Could someone help us please? Thank you

  If you install CS5 there is not need to do this if your only reason is so that you can install CS6.  CS6 is a standalone product and does not update CS5.   You'll need is to first install CS6 and then activate it with CS6 serial number.  After that he will notice that you do not have a version more old qualification and then did you select CS5 as this release candidate and then provide its serial number.