VRealize Automation Services 6.2 Application Deployment not removed after the expiry of the vRA (vCAC) machine"

Similar Questions

• ISE Application does not start after the upgrade to version 1.2

  Hello

  We have a customer who uses a device of ISE-3315 hardware running 1.1.4.218 Patch1. He had to take 1.2 Patch 2 to support iOS7. There is no secondary device so it is a stand-alone deployment.

  We did the upgrade according to Cisco documents (backup, patch the current to the last patch, perform the upgrade). It all seems to have gone through successfully. I can access the CLI through SSH, but application services will not start. I tried to stop and start services (application stop ise / ise to start the app), but I get the following message:

  LSE / ise to start the admin application #.

  Waiting up to 20 seconds to lock: APP_START for complete

  Database is always blocked by lock: APP_START. Abandonment. Please try again later

  % Error: another process ISE DB (APP_START) is current, cannot perform to start the Application at this time

  I waited for half a day, but it remained the same. Also configure the controls as application or application config-reset do not work. restart the ISE has failed as well.

  A someone has encountered this problem and solved? My next idea would be a pure re install 1.2 ISE and then restore the backup.

  Kind regards

  Patrick

  I had a problem with the upgrade of MnT DB for an ISE 1.1 to 1.2 upgrade ISE.  It got stuck for hours.  On appeal by TAC, that is exactly what they advised.  Install a fresh node and restore the backup.  It converts it to 1.2 during restoration.

  The TAC engineer, I rubbed also admitted that they had very mixed in the 1.1-> 1.2 upgrade so that they were recommending new installation and restore the configuration.

• Applications do not work after the update!

  Last night, I got a notification from the App Store that my MacBook needs to restart to complete the installation of updates. It is fairly common, so I clicked restart and let it do its thing. Some time later, I noticed from upward and go to my office. It was late, I therefore closed my screen and fell asleep. This morning I woke up and went to the pros use, and when I tried to open Mail dock I get the error "Cannot open"Mail"because it may be damaged or incomplete" and the icon has changed to this little pencil 'symbol' I tried some other apps, and it's the same thing. It seems that there is not a single application, I can open it. Every single app gives me this error message. When I open the Finder (the only thing I can open it) and go to the Applications folder, the only two things that are there is an icon of mail (changed on the small pencil symbol) and a folder called "utilities".

  To make things worse, Time Machine worked right for about a month, so I do not have a recent backup. I keep a sense repair or find a better backup program, but I don't have the time. My main concern is that all my music (from iTunes) files are still there. When I browse it in the Finder, it seems that all the files are still there. He Spears is only my applications that don't work... but he's literally all alone! Is that what I can do about it? Please let me know if anyone has an idea of what's going on!

  A

  If you want to keep the data on the boot disk, and it is already saved, you must try to save now, before doing anything else. It may or may not be possible. If you don't care the data, you can skip this step.

  There are several ways to back up a Mac that is not fully functional. You need an external hard drive or other storage device to store the data.

  1. start the recovery partition, of the recovery of the Internet or a local time Machine backup volume (button option key at startup). Launch the disk utility and follow the instructions in this support articleto the title of the "Instructions for the backup on an external hard drive via disk utility". The article refers to the start of a DVD, but the recovery mode procedure is the same. You don't need a DVD if you use OS X 10.7 or higher.

  If you use FileVault 2, you must first unlock the boot volume. Select its icon ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the drive, usually with the same name. Select open in the file menu. When you are prompted, enter your login password.

  2. If method 1 fails because of disk errors, then you can be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

  3. If you have access to a working Mac, and she and the non-working Mac FireWire ports or Thunderbolt, start the Mac non-working in target disk mode. A MacBook to the retina (2015 or later) with a USB - C port can also be started in target disk mode and connected to another Mac using a USB cable and an adapter.

  Work Mac to copy the data to another drive.

  This technique will not work with USB (except on a MacBook of the retina), Ethernet, Wi - Fi or Bluetooth. Note that a MacBook Pro (with Thunderbolt) retina is distinguished by a MacBook to the retina, and it cannot be connected to another Mac via USB in target disk mode.

  4. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

  B

  This procedure will remove some temporary and cache files. The files are generated automatically and do not contain any of your data. Sometimes they can become corrupted and cause problems like yours.

  Please, back up all data.

  Triple-click anywhere in the line below on this page to select this option:

  /var/folders

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ Open

  the contextual menu.* should open a case with a funny name "records".

  Inside 'files' are several subfolders, each with a two-character name. Drag all subfolders except named "zz" to the trash. Do not delete the subfolder named "zz". You will be asked for your administrator credentials.

  Restart the computer and empty the trash.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• most applications do not work after the new update de.3 El Capitan.  Includes Safari, Mail, System Preferneces.

  I've updated to version 11.3 of El Capitan and now nothing works.    Safari, preferences system, Chrome, Mail, calendar, all say app is damaged or corrupted. Tried to download Apple and he run.   The same problem.

  This procedure will remove some temporary and cache files. The files are generated automatically and do not contain any of your data. Sometimes they can become corrupted and cause problems like yours.

  Please, back up all data.

  Triple-click anywhere in the line below on this page to select this option:

  /var/folders

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ Open

  the contextual menu.* should open a case with a funny name "records".

  Inside 'files' are several subfolders, each with a two-character name. Drag all subfolders except named "zz" to the trash. Do not delete the subfolder named "zz". You will be asked for your administrator credentials.

  Restart the computer and empty the trash.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• Applications no longer work after the update of the game store!

  In my Xperia SP applications do not work after the update from the game store and shows 15 times in one minute, unfortunately "Skype/social life/mcafee/chrome, etc." has stopped working while triying to open it. This problem is started, because I updated my phone in 4.3 jelly bean.

  My phone is ok now...

  I contacted the sony Xperia care and suggested a repair.

  And after repairing its great and works without a problem...

  The solution is here...

  Dear Mr. Jab,

  Greetings from support Sony Xperia.

  We sincerely regret the inconvenience.

  We appreciate the importance of your concerns and we are here for you help.
  In response to the request of ypur, we would like to inform to run the reapair software.

  The enforcement procedure to repair your Windows computers using software and application of PC Companion:

  Note! You should always back up all data before you perform a repair of software.

  1. Download PC Companion to sony and install it on your Windows computer.
  2. Turn off the phone and disconnect the computer.
  3. Open the PC Companion application.
  4. Select start under the support area.
  5. Select the software update feature, and then start.
  6. Not found phone is displayed. Select phone repair and Connect.
  7. You will receive a message on PC companion, that data will be lost if you continue.
  8. Check the box to confirm that you have understood that all personal data will be lost. And then click Next. The application prepares the update and if necessary necessary downloads data on the web.
  9. Select your phone model manually, and then click Next.
  10. Depending on the model chosen, you will need to perform a few steps for the update for PC Companion be able to update the phone software.
  11. Yet, do not plug the phone! Note! At this point, the phone must be turned off and disconnected from the computer.
  12. Connect the USB cable to the computer, not on the phone.

  13.Xperia: then just pressed the button indicated, connect the USB cable for device theXperia and keep holding and pressing the indicated key until your device update started... appears (in some cases installation drivers appears first).

  1. If you have not correctly, do the phone turns on and proceed to the next steps, drag the bottom of the convening of the notification bar.
  2. In this case, disconnect the phone from the cable, turn it off and repeat step 12.
  3. Follow the instructions on the screen. Once the repair is completed, unplug the unit and then restart the device.
  4. Click on Next. If the repair was successful, the message this device has been updated successfully is displayed.
  5. Click Finish.

  Please contact the Support of Sony Xperia.

  Looking to better serve you.

  Kind regards.

• My application is not updated in the app store. Brand is not move stop I try

  Please, I want to update my application do not move all the app s

  What have you tried? for example

  -logging out and back to your account on the phone,

  -disconnect and reconnect to your network

  -close the App Store application via the task bar of the phone,

  -soft-reset/reboot the phone

• Error message - "this application could not start because the side-by-side - configuration - is incorrect, when you access programs."

  Hello

  Any help step by step to address this issue would be welcome

  On a Fujitsu laptop running Vista and MS office 2010, when I try to access word, excel, or one of the other programs, I get the following error message - "this application could not start because the configuration - side by side - is incorrect." see the applications for more information event log"

  Thank you in anticipation

  Hi BackrowSteve,

  1. did you of recent changes on the computer?

  Method 1:

  If you are facing the issue only with the Office programs, you can read the following article and check if that helps:

  http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

  Method 2:

  If not, then you can uninstall all existing versions of Microsoft Visual C++ Redistributable Package and install the latest version of Microsoft Visual C++ 2010 redistributable and check if it helps.

  Step 1: To uninstall the package:

  a. open programs and features.

  b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

  c. click on uninstall at the top of the list.

  Step 2: Download and install the latest package depending on the version of Windows Vista, you use and see if it helps.

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  Hope this information is useful.

• This application could not start because the configuration - side by side - is incorrect

  After the upgrade to Windows7 x 64 professional, I am now get, "this application could not start because the configuration - side by side - is incorrect ' nero drive. I tried to reinstall the program and uninstall Microsoft Virtual C++ packages + without any result.

  Any help would be appreciated.

  Hi ChickC  

   

  Welcome to Microsoft Windows 7 answers Forum!

  a. use the System File Checker (SFC.exe) tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ·         Infoermation more on SFC scan found in this document:

  http://support.Microsoft.com/kb/929833

  b. perform a disk check:

  Use the following steps:

  1. Open computer by clicking the Start button, click computer.
  2. Click the drive you want to check, and then click Properties.
  3. Click on the Tools tab and then, under error-checking, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.

  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  1. Click Start.

  Depending on the size of your drive, it may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  The .NET framework update

  Download and install the most recent of the .NET Framework

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en

  If the error still persists please provide us with the error log:

  Type eventvwr.msc/s in the address bar.

   The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

  It will be useful.

  Thank you, and in what concerns:

  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

• Application does not connect to the server using WAP2.0

  Hello

  I used following code to get the suffix of the url that is required to connect to the application server using WAP2.0

         if(CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_DIRECT))
          {
                  //WAP 2.0
              String uid = null;
              ServiceBook sb = ServiceBook.getSB();
              ServiceRecord[] records = sb.findRecordsByCid("WPTCP");
              for (int i = 0; i < records.length; i++) {
                  if (records[i].isValid() && !records[i].isDisabled()) {
                      if (records[i].getUid() != null &&
                          records[i].getUid().length() != 0) {
                          if ((records[i].getCid().toLowerCase().indexOf("wptcp") != -1) &&
                              (records[i].getUid().toLowerCase().indexOf("wifi") == -1) &&
                              (records[i].getUid().toLowerCase().indexOf("mms") == -1)   ) {
                              uid = records[i].getUid();
                              break;
                          }
                      }
                  }
              }
  
              if(uid!=null)
              {
                  if(AppConfigurations.DEBUG)
                      System.out.println("Connected using direct WAP2.0....");
                  return ";ConnectionUID="+uid;
              }
          }
  

  I am same ConnectionUID as present in this complete book in Options in the device.

  Even application does not connect to the server using WAP2.0.

  Let me know what other things should I check to make application to connect to the server using WAP2.0.

  My phone is BB 8900 and OS 4.6.1

  WAP connection will pass through the gateway of the carrier.  This gateway can oppose your respect, or might be trying to optimize the data, or can display a login page for you.  Try the same URL that you use in your program, directly with the WAP browser on the device and see if that runs through effectively.

• The application is not responding. The program can meet again if you wait. You want to put an end to this process

  Whenever logged on windows 7, I get the following message:

  "The application is not responding.  The program can meet again if you wait.
  Do you want to put an end to this process"with the choice of the end of the process and cancel.
  When I type complete the process the screen shows my wallpaper and not icons or the bar of windows at all. When I hit Cancel, the message of disappears for around one minute and shows up again.
  I can't use my phone at all in this way, so I hope you can help me.
  Sven

  Reboot the PC by using the F8 key at startup, this time select command prompt, and then follow the instructions for restoring the system;

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Start-System-Restore-from-a-command-prompt

  Select a restore point to a period where it was all is OK

• APPLICATION will not appear on the main menu of the Simulator... Help, please

  Hello everyone,

  I came across this example code and tried to run on the Simulator 9900 and for some reason, the Simulator does not pick up the code. ..

  as the application does not appear on the main menu screen options... so I can not fire at all.

  someone knows why... ID really appriciate the help

  (Note: the simple code opens a new window when clicking on a button)

  Kind regards

  gezzy

  package mypackage;
  
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.FieldChangeListener;
  import net.rim.device.api.ui.UiApplication;
  import net.rim.device.api.ui.component.ButtonField;
  import net.rim.device.api.ui.component.LabelField;
  import net.rim.device.api.ui.container.MainScreen;
  
  public class FirstScreen extends MainScreen implements FieldChangeListener {
      ButtonField theButton;
  
      public FirstScreen() {
          add(new LabelField("First Screen"));
  
          theButton = new ButtonField("New Screen", ButtonField.CONSUME_CLICK);
  
          theButton.setChangeListener(this);
  
          add(theButton);
      }
  
      public void fieldChanged(Field field, int context) {
  
          if (field == theButton) {
          UiApplication.getUiApplication().pushScreen(new SecondScreen());
          }
  
      }
  
      public class SecondScreen extends MainScreen {
  
          public SecondScreen() {
              add(new LabelField("Second Screen"));
          }
      }
  }
  

  I think you are saying that the application icon will not be displayed on the Simulator? If so, this can help (I had the same problem and what I did):

  1 assuming you are using Eclipse, just run the program (it will be forfeit and display an icon to load for a few seconds on the Simulator).

  2. then go to file-> load BlackBerry Application or theme on the Simulator.

  3 navigate to your compiled COD of the file, then open it.

  4 after a loading icon, the application should appear in the menu.

  If this does not work, try to close the Simulator and do step 1.

  I hope this will help!

• This application is not compatible with the operating system installed. Please upgrade to Windows 98SE, Windows 2000 or more.

  Hi all

  I recently installed a mod for S.T.A.L.K.E.R SoC V1.004. The game won't start not even, instead, it gives me the following message:

  This application is not compatible with the operating system installed.
  Please upgrade to Windows 98SE, Windows 2000 or more.

  I'm under Win 8 64 bit. I have uninstalled and rebooted twice (both game and mod) does not.

  I have to downgrade to XP to be able to play this awesome mod, he ran on this platform with the same configuration before, why he now rejects it know not only the people at Ms.

  Please help if possible

  Thank you very much

  Pierre Viljoen

  Probably, all in all probably is a 16-bit program, and as such does not work on Windows 8.0/8.1 64 bit. In addition, the game seems to have 20 years or more. You can try running in compatibility mode, but I think that the game is dead. Hope this helps and if you need help please post and we will be happy to help you.

  The above opinion is mine and casually and does not necessarily reflect that of Microsoft, they are employees. or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe"-John Muir

• My DPS application does not appear in the Iphone App store?

  Hello

  Until very recently, I only ever designed for the ipad, but recently, I made sure that all my folios have made multiple accessible on iphones etc.

  However, I realize that my (Professional edition) published application is not available in the iphone App store and I do not understand why not? It is available on ipad.

  Help, please!

  Thanks a lot and best regards,

  Have you changed the application in the App Builder to be an iPhone and iPad app? Chances are that your existing application was built as a single app for iPad. You must update in the App Builder and then resubmitting to Apple. I think that for it to actually build a new application, as the setting for iPad only cannot be changed via a tool for editing to an existing application.

  Neil

• the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003

  the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003. PFA

  Ranjana,

  Please, review the vminst.log file located in % TEMP and see if we could see related errors.  Otherwise follow the troubleshooting steps below;

  1. check that the guest operating system that you want to install VMware Tools is fully certified.

  2. check that the correct guest operating system is selected

  3. check that the good ISO image is loaded. For more information, see ensuring good ISO image VMware tools is loaded (1003910).

  4. check that the VMware Tools ISO image has not been damaged. For more information, see determine if your VMware Tools ISO image is damaged on a host ESX/ESXi (1004820).

  5. If you are installing a Windows operating system, make sure that you do not encounter problems with your Windows registry database. For more information about the resolution of the problems of register with VMware Tools, see Impossible to upgrade the existing VMware tools (1001354).

  6. If you install on a 64-bit Linux guest OS, make sure that there are no missing dependencies. For more information, see Tools from VMware install fails to start the daemon of guest OS on the operating systems 64-bit Linux with the glibc-common package 32-bit installed (1023185).

  If your problem persists, please refer to: KB VMware: VMware Tools installation problems that are defective in a guest operating system or contact support.

  ~ dGeorgey

• Creative Cloud applications do not appear in the creative cloud download window

  Creative Cloud applications do not appear in the creative cloud download window

  The Creative cloud only window the list programs that the system is able to run.  If some are missing, this may mean that the system does not meet the minimum requirements to run the applications.