ASA VPN positive = SSL VPN?

Hello

I have a pair of FO, I need to exchange an ASA5520 who owns a license of VPN over 750

Can I use an ASA5520 with ASA5500-SSL-750 instead

Regards Tony

Yes, it is always available on order. Part number: ASA5520-VPN-PL =

In addition, this more ASA VPN would be much much cheaper than the SSL VPN license.

Thank you

Kiran

Tags: Cisco Security

Similar Questions

site to site vpn with ASA 5500 series SSL?

We have routers DLink DIR - 130 5505 s ASA and PIXen, all work well with our PIX 515E, we need to replace.

We also have Internet satellite in two places. High latency makes IPsec VPN to DLinks on these very slow sites.

We were informed by HughesNet that a SSL VPN will mitigate some of the problems of latency.

However, we cannot use a VPN client for the biometric timeclocks in these places, the clocks need static IP addresses and are more or less "dumb terminals".

The machine of series 5000 ASA VPN site to site similar to OpenVPN or only the most comment client-server type SSL VPN connections?

Thank you, Tom

Hi Thomas,

The SSL VPN on ASAs feature is a client/server relationship where the remote computer can connect without client (browser) or clientbased (AnyConnect) to the ASA.

Federico.

Device behind a Firewall other, ASA VPN

I have a client who wants to put their VPN / behind the ASA ASA main connected to the Internet. Both devices have an inside leg for the internal network, but the ASA VPN connects directly to the Internet ASA.

Topology:

Outisde FW: Internet transfer Procedure > ASA/FW > leg DMZ to ASA/VPN

ASA VPN: Outside the L3 Interface interface DMZ of ASA/FW link

On the outside NAT FW I would be the external address of the VPN / ASA outside the public IP address is available and I have a rule that allows all IP from outside to outside the private IP VPN. Inside = 192.168.254.1 outside = public IP address.

Configured on the VPN / ASA, ASA standard SSL Remote Access.

When I hit the NAT public IP address, nothing happens. I've run packet - trace on the FW outside, and everything seems good.

Someone at - it a sampling plan / config for a similar topology? Internet > ASA/FW > dmz-leg > ASA/VPN

Thanks in advance,
Bob

Can share you your NAT and routing configuration? Of these two ASAs

ASA VPN with Fortgate

Hello people!

I still have the problem with VPN... Laughing out loud

I have to create a new VPN site to site between ASA 5510 (8.42 IOS) and Fortgate, but something is very strange, Don t VPN came and I see in the debug crypto 10 ikev1 the newspaper to follow:

[IKEv1] phase 1 default: incompatibility of types of attributes of class Gr OUP Description: RRs would be: Cfg 1 group would be: Group 2

But if I ask the other peer to change in Group 2, the msg in the SAA is:

[IKEv1] phase 1 default: incompatibility of types of attributes of class Gr OUP Description: RRs would be: Group 2 GCF: Group 1

Fortgate is possible to activate the two specific groups of VPN 1 and 2, and I would ask the other peer left this way and the ASA show:

[IKEv1] phase 1 default: incompatibility of types of attributes of class Gr OUP Description: RRs would be: Group 2 GCF: Group 1
[IKEv1] phase 1 default: incompatibility of types of attributes of class Gr OUP Description: RRs would be: Cfg 1 group would be: Group 2

The show isakmp his:

9 counterpart IKE: 179.124.32.181
Type: user role: answering machine
Generate a new key: no State: MM_WAIT_MSG3

I have delete and creat VPN 3 x and the same error occurs.

Everyone has seen this kind of problem?

Is it using Fortigate version 5 by chance?

I saw Cisco ASA VPN problems repeatedly with this code Fortigate, but above all it has been a problem of Phase 2 and defining KB life maximally on the side of the ASA has solved it... However this seems not to be your problem here.

The first thing in your config I see you have PFS enabled - have you insured it is located on the side of Fortinet or tried to turn it off on the side of Cisco to see if it happens?

Be stuck at MM_WAIT_MSG3 means that you sent your return policy, but then you have not received the third package in the ISAKMP riding so either the Fortigate is unhappy with something or there's a routing problem (however unlikely given that you have already had communication)

Try on the side of the ASA:
```
debug crypto isakmp 7
```
You can also confrm your external interface is 'outside1 '? You can see this "see intellectual property."

ASA VPN - allow user based on LDAP Group

Hello friends

I have create a configuration to allow connection based on LDAP Group.

I m not specialize in the firewall and I tried to follow the links above, but both seem old, commanded several is not available.

http://www.tunnelsup.com/Cisco-ASA-VPN-authorize-user-based-on-LDAP-group

http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

Anyone know how I can do?

Thank you

Marcio

I like to use the Protocol DAP (dynamic access policies) to control this. Follow this guide:

https://supportforums.Cisco.com/document/7691/ASA-8X-dynamic-access-policies-DAP-deployment-guide

Assign the static IP address by ISE, ASA VPN clients

We will integrate the remote access ASA VPN service with a new 1.2 ISE.

Authentication is performed in Active directory. After authentication, can address assigned to a specific user of VPN by ISE IP?

This means that the same VPN user will always get the same IP address. Thank you.

Daniel,

You can override the IETF-RADIUS-Framed-IP-Address in the authorization policy.

However if I may make a suggestion:

Unless you have only a handful of users to do so, it may be appropriate to assign the address of ISE pool or perform the mapping of LDAP attributes on ASA itself.

In the latter case, the IP addresses are kept on the server as LDAP attributes and ASA will map the IP address. You don't want to keep address IP DB in several places.

M.

ASDM conc (ASA) VPN access

I have the script like this:

an ASA, which is the FW, TR making static NAT from the public to the private IP and private IP address add is add conc (another ASA) VPN. I am accessing these devices via the VPN client and I get the address IP of VPN pool set on VPN conc. VPN conc. is in a DMZ VLAN, but it also has connection to the local network segment. Purposes of mgmt, I connect to this VPN through SSH conc via a switch in the local network segment. To use the http access, I have to be on one of the servers that are in the local network segment. Since then, when I set up the VPN connection, I'm sure VPN conc., what can do to access http directly from my PC?

This sets up on the conc VPN:
```
management-access inside
After that you should be able to use ASDM over the VPN tunnel, by connecting to its inside ip address.
hth

    Herbert

    (note, I assume the name of the interface connected to the LAN is named "inside", if not adapt at will )
```

New ASA/VPN configuration

So, I am looking to add one of my spare 5510 firewall to my secondary network as a vpn connection.

All I want this new ASA to do is handle my site anyconnect VPN connections. I'm pretty new to ASAs if any help would be great. I know how to create a new access VPN on my ASA and I added a NAT for my inside and outside traffic to my new Pool of IP VPN.

My question is, since it's only for the VPN and I want all my current internal traffic to continue to the asa 5510 existing routing, do I have to enter the ACL to my new single AAS of VPN? ACLs are used for VPN traffic and do I need them to traffic the route via VPN?

I'll put up inside interface of connection to one of my main Cisco switches and the outside interface connects to my DMZ switch on the new ASA only VPN.

Thank you

I don't know if I am how you connect to the external interface of single ASA VPN. Normally, in this type of installation, we would see the ASA VPN "in parallel" with the perimeter firewall.

You mention the DMZ switch that threw me a little. If you are in France through your main firewall and go to single ASA VPN via the DMZ then Yes you will need to allow several open ports (protocol 50, udp/500, tcp/443 among others) and may have to do some other techniques (NAT - T, etc.) depending on the type of remote you are implementing. That's why we rarely see this configuration used - it adds a good dose of complexity without significant benefit.

When the old facility is used, you need to switch internal to know to route traffic to the pool VPN through the only ASA VPN inside the interface. A static route is more often used, although you can use OSPF or EIGRP if you wanted to.

Should generally not be any access list that VPN traffic around the Bank access lists incoming interface. Back to remote clients traffic is coming from inside and out through (and is usually part of anestablished connection) so no access list is necessary inside.

ASA VPN on physical IP address only?

Hello

Is it possible to set up a virtual IP address dedicated to endpoint on ASA VPN version 8.3 and later?

I don't want to use the physical IP address on my external interface.

Thank you

No problem. Mark pls kindly responded to this post like so that others may learn from your post. Thank you.

ASA Vpn load balancing and failover

Hi all.

We have two asa5520 configured as main unit and emergency in failover configuration, and everything works fine.

Is it possible with this configuration (switch), configure the vpn load balancing/grouping?

Thank you

Daniele

Hi Daniele,

You cannot run two of them on two firewalls ASA, VPN feature load balancing or failover functionality.

Where you need to use the two feature, you must use more than three ASA firewall, two first ASAs will work as the failover and the ASA third will work as cluster VPN for them, the following example uses four firewalls:

ASA1 (active FO) - ASA2 (TF Standby)

(VPN virtual master)

|

|

|

|

(Backup VPN device)

ASA3 (active FO) - ASA4 (TF Standby)

Kind regards

Wajih

Vs ASA VPN SSL IPSEC

Hello all -

I'm working on an ASA 5510, running version 8.4. I'm looking for something that I imagine would be simple, but having a few problems.

I am configuring the connection profile for the client and clientless VPN on the SAA. I would like the profiles of customer (who will serve with anyconnect by our internal staff) to have the possibility to select the profile to login on the login page. I have create a subnet by using policies and business unit to restrict access to various servers. This option button is displayed on the page of remote vpn in the ASDM, I select it and problem solved, they see a drop-down menu when using the anyconnect client, select one and the appropriate IP pool is assigned.

Now, when I am configuring profiles without client (to be used by our external business clients), I don't want that they have the ability to choose a profile. At least not the ability to see all of the internal profiles, I created for our internal employees. It is displayed by selecting this option in the "client access", it also allows her to "client access". What Miss me in how I can prevent our external collaborators via SSL, see the profiles that I created for our internal employees via the drop-down list? As I hinted above, I use the ASDM.

Any help would be appreciated-

Brian

Hello

Unfortunately this is not possible because when you enable the option for users to select the connection profile, it will be available for all connections. If this is not enabled the default policy will be selected so it is a must to have chosen option.
What you can do is to create a group URL and maps it to a specific connection profile, so when users type in the full URL for example https://my domain.com / external it will take the user directly on the specific connection profile.

The size to the bottom of this configuration is that if someone types in the URL without the group URL it is taken to the default profile and can see the drop-down list with all connection profiles.

Sent by Cisco Support technique iPad App

ASA 8.3 - SSL VPN - NAT problem

Need help to find how to configure anyconnect VPN with VPN client using a NAT networking internal.

There are many items on the side - how to disable NAT for vpn pool.

I need to create the gateway VPN to the complex international lnetwork, vpnpool is out of range of regular subnet of that network, so it's going to be questions witout NAT routing.

I so need to vpn clients connected to be PATed to . The problem is that there is also a dynamic to PAT rule for the ordinary acccess Iternet which translates as 'rules NAT asymmetry... "error.

Create two times different NAT rules and moving them on up/down makes no difference. There are also some hidden rules of vpn setup :-(that could not be seen.

V8.3 seems is destroying trust in Cisco firewall...

Thank you.

Stan,

Something like this works for me.

192.168.0.0/24---routeur--172.16.0.0/24 ASA-= cloud = host. (the tunnel he get IP address of 'over' pool, which is also connected to the inside)

BSNs-ASA5520-10 (config) # clear xlate
INFO: 762 xlates deleted
BSNs-ASA5520-10 (config) # sh run nat
NAT (inside, outside) static all of a destination SHARED SHARED static
!
NAT source auto after (indoor, outdoor) dynamic one interface
BSNs-ASA5520-10 (config) # sh run object network
network of the LOCAL_NETWORK object
192.168.0.0 subnet 255.255.255.0
The SHARED object network
172.16.0.0 subnet 255.255.255.0
BSNs-ASA5520-10 (config) # sh run ip local pool
IP local pool ALL 10.0.0.100 - 10.0.0.200
local IP ON 172.16.0.100 pool - 172.16.0.155
BSNs-ASA5520-10 (config) # sh run tunne
BSNs-ASA5520-10 (config) # sh run tunnel-group
attributes global-tunnel-group DefaultWEBVPNGroup
address pool ON

If I get your drift... bypass inside and outside is not really necessary on Cisco equipment as it should work straight out of the box via the proxy arp, but I'm not face or solution providers for remote access.

Marcin

L2l 1941 to ASA VPN

Hi all

I have a strange problem, trying to establish a VPN between my camera (1941) and a distance of ASA.

The question is, can I say is that the IKE phase precipitates after MM6. I'm not an expert in the present, but I'll try to explain to the best of my knowledge

Here's a cry full debugging isakmp:

* 05:12:05.187 Jun 10: ISAKMP: (1001): serving SA., his is 3AD3BE6C, delme is 3AD3BE6C

* Jun 10 05:12:05.259: ISAKMP: (0): profile of THE request is (NULL)

* 05:12:05.259 Jun 10: ISAKMP: created a struct peer 41.223.4.83, peer port 500

* 05:12:05.259 Jun 10: ISAKMP: new created position = 0x4B475724 peer_handle = 0 x 80000004

* 05:12:05.259 Jun 10: ISAKMP: lock struct 0x4B475724, refcount 1 to peer isakmp_initiator

* 05:12:05.259 Jun 10: ISAKMP: 500 local port, remote port 500

* 05:12:05.263 Jun 10: ISAKMP: set new node 0 to QM_IDLE

* 05:12:05.263 Jun 10: ISAKMP: find a dup her to the tree during the isadb_insert his 3AD3BE6C = call BVA

* 05:12:05.263 Jun 10: ISAKMP: (0): cannot start aggressive mode, try the main mode.

* 05:12:05.263 Jun 10: ISAKMP: (0): pair found pre-shared key matching 41.223.4.83

* Jun 10 05:12:05.263: ISAKMP: (0): built of NAT - T of the seller-rfc3947 ID

* Jun 10 05:12:05.263: ISAKMP: (0): built the seller-07 ID NAT - t

* Jun 10 05:12:05.263: ISAKMP: (0): built of NAT - T of the seller-03 ID

* Jun 10 05:12:05.263: ISAKMP: (0): built the seller-02 ID NAT - t

* 05:12:05.263 Jun 10: ISAKMP: (0): entry = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM

* 05:12:05.263 Jun 10: ISAKMP: (0): former State = new State IKE_READY = IKE_I_MM1

* Jun 10 05:12:05.263: ISAKMP: (0): Beginner Main Mode Exchange

* Jun 10 05:12:05.263: ISAKMP: (0): lot of 41.223.4.83 sending my_port 500 peer_port 500 (I) MM_NO_STATE

* 05:12:05.263 Jun 10: ISAKMP: (0): sending a packet IPv4 IKE.

* 05:12:05.475 Jun 10: ISAKMP (0): received 41.223.4.83 packet dport 500 sport Global 500 (I) MM_NO_STATE

* 05:12:05.475 Jun 10: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH

* 05:12:05.475 Jun 10: ISAKMP: (0): former State = new State IKE_I_MM1 = IKE_I_MM2

* Jun 10 05:12:05.475: ISAKMP: (0): treatment ITS payload. Message ID = 0

* Jun 10 05:12:05.475: ISAKMP: (0): load useful vendor id of treatment

* Jun 10 05:12:05.475: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69

* 05:12:05.475 Jun 10: ISAKMP (0): provider ID is NAT - T RFC 3947

* Jun 10 05:12:05.475: ISAKMP: (0): load useful vendor id of treatment

* Jun 10 05:12:05.475: ISAKMP: (0): IKE frag vendor processing id payload

* 05:12:05.475 Jun 10: ISAKMP: (0): IKE Fragmentation support not enabled

* 05:12:05.475 Jun 10: ISAKMP: (0): pair found pre-shared key matching 41.223.4.83

* Jun 10 05:12:05.475: ISAKMP: (0): pre-shared key local found

* 05:12:05.475 Jun 10: ISAKMP: analysis of the profiles for xauth...

* 05:12:05.475 Jun 10: ISAKMP: (0): audit ISAKMP transform 1 against the policy of priority 1

* 05:12:05.475 Jun 10: ISAKMP: AES - CBC encryption

* 05:12:05.475 Jun 10: ISAKMP: keylength 256

* 05:12:05.475 Jun 10: ISAKMP: SHA hash

* 05:12:05.475 Jun 10: ISAKMP: group by default 2

* 05:12:05.475 Jun 10: ISAKMP: pre-shared key auth

* 05:12:05.475 Jun 10: ISAKMP: type of life in seconds

* 05:12:05.475 Jun 10: ISAKMP: life (basic) of 28800

* 05:12:05.475 Jun 10: ISAKMP: (0): atts are acceptable
. Next payload is 0
* 05:12:05.475 Jun 10: ISAKMP: (0): Acceptable atts: real life: 0

* 05:12:05.475 Jun 10: ISAKMP: (0): Acceptable atts:life: 0

* 05:12:05.475 Jun 10: ISAKMP: (0): base life_in_seconds:28800

* 05:12:05.475 Jun 10: ISAKMP: (0): return real life: 28800

* 05:12:05.475 Jun 10: ISAKMP: (0): timer life Started: 28800.

* Jun 10 05:12:05.511: ISAKMP: (0): load useful vendor id of treatment

* Jun 10 05:12:05.511: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69

* 05:12:05.511 Jun 10: ISAKMP (0): provider ID is NAT - T RFC 3947

* Jun 10 05:12:05.511: ISAKMP: (0): load useful vendor id of treatment

* Jun 10 05:12:05.511: ISAKMP: (0): IKE frag vendor processing id payload

* 05:12:05.511 Jun 10: ISAKMP: (0): IKE Fragmentation support not enabled

* 05:12:05.511 Jun 10: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE

* 05:12:05.511 Jun 10: ISAKMP: (0): former State = new State IKE_I_MM2 = IKE_I_MM2

* Jun 10 05:12:05.511: ISAKMP: (0): lot of 41.223.4.83 sending my_port 500 peer_port 500 (I) MM_SA_SETUP

* 05:12:05.511 Jun 10: ISAKMP: (0): sending a packet IPv4 IKE.

* 05:12:05.511 Jun 10: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE

* 05:12:05.511 Jun 10: ISAKMP: (0): former State = new State IKE_I_MM2 = IKE_I_MM3

* 05:12:05.727 Jun 10: ISAKMP (0): received 41.223.4.83 packet dport 500 sport Global 500 (I) MM_SA_SETUP

* 05:12:05.727 Jun 10: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH

* 05:12:05.727 Jun 10: ISAKMP: (0): former State = new State IKE_I_MM3 = IKE_I_MM4

* Jun 10 05:12:05.727: ISAKMP: (0): processing KE payload. Message ID = 0

* Jun 10 05:12:05.759: ISAKMP: (0): processing NONCE payload. Message ID = 0

* 05:12:05.759 Jun 10: ISAKMP: (0): pair found pre-shared key matching 41.223.4.83

* Jun 10 05:12:05.759: ISAKMP: (1003): load useful vendor id of treatment

* Jun 10 05:12:05.759: ISAKMP: (1003): provider ID is the unit

* Jun 10 05:12:05.759: ISAKMP: (1003): load useful vendor id of treatment

* Jun 10 05:12:05.759: ISAKMP: (1003): provider ID seems the unit/DPD but major incompatibility of 104

* Jun 10 05:12:05.759: ISAKMP: (1003): provider ID is XAUTH

* Jun 10 05:12:05.759: ISAKMP: (1003): load useful vendor id of treatment

* Jun 10 05:12:05.763: ISAKMP: (1003): addressing another box of IOS
!
* Jun 10 05:12:05.763: ISAKMP: (1003): load useful vendor id of treatment

* 05:12:05.763 Jun 10: ISAKMP: (1003): vendor ID seems the unit/DPD but hash mismatch

* 05:12:05.763 Jun 10: ISAKMP: receives the payload type 20

* 05:12:05.763 Jun 10: ISAKMP (1003): sound not hash no match - this node outside NAT

* 05:12:05.763 Jun 10: ISAKMP: receives the payload type 20

* 05:12:05.763 Jun 10: ISAKMP (1003): No. NAT found for oneself or peer

* 05:12:05.763 Jun 10: ISAKMP: (1003): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE

* 05:12:05.763 Jun 10: ISAKMP: (1003): former State = new State IKE_I_MM4 = IKE_I_MM4

* 05:12:05.763 Jun 10: ISAKMP: (1003): send initial contact

* 05:12:05.763 Jun 10: ISAKMP: (1003): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication

* 05:12:05.763 Jun 10: ISAKMP (1003): payload ID

next payload: 8

type: 1

address: 82.117.193.82

Protocol: 17

Port: 500

Length: 12

* 05:12:05.763 Jun 10: ISAKMP: (1003): the total payload length: 12

* Jun 10 05:12:05.763: ISAKMP: (1003): lot of 41.223.4.83 sending my_port 500 peer_port 500 (I) MM_KEY_EXCH

* 05:12:05.763 Jun 10: ISAKMP: (1003): sending a packet IPv4 IKE.

* 05:12:05.763 Jun 10: ISAKMP: (1003): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE

* 05:12:05.763 Jun 10: ISAKMP: (1003): former State = new State IKE_I_MM4 = IKE_I_MM5

* 05:12:05.975 Jun 10: ISAKMP (1003): received 41.223.4.83 packet dport 500 sport Global 500 (I) MM_KEY_EXCH

* Jun 10 05:12:05.975: ISAKMP: (1003): payload ID for treatment. Message ID = 0

* 05:12:05.975 Jun 10: ISAKMP (1003): payload ID

next payload: 8

type: 1

address: 41.223.4.83

Protocol: 17

Port: 0

Length: 12

* Jun 10 05:12:05.975: ISAKMP: (0): peer games * no * profiles

* Jun 10 05:12:05.975: ISAKMP: (1003): HASH payload processing
. Message ID = 0
* 05:12:05.975 Jun 10: ISAKMP: received payload type 17

* 05:12:05.979 Jun 10: ISAKMP: (1003): SA authentication status:

authenticated

* 05:12:05.979 Jun 10: ISAKMP: (1003): SA has been authenticated with 41.223.4.83

* 05:12:05.979 Jun 10: ISAKMP: try to insert a 82.117.193.82/41.223.4.83/500/peer and inserted 4 B 475724 successfully.

* 05:12:05.979 Jun 10: ISAKMP: (1003): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH

* 05:12:05.979 Jun 10: ISAKMP: (1003): former State = new State IKE_I_MM5 = IKE_I_MM6

* 05:12:05.979 Jun 10: ISAKMP: (1003): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE

* 05:12:05.979 Jun 10: ISAKMP: (1003): former State = new State IKE_I_MM6 = IKE_I_MM6

* 05:12:05.979 Jun 10: ISAKMP: (1003): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE

* 05:12:05.979 Jun 10: ISAKMP: (1003): former State = new State IKE_I_MM6 = IKE_P1_COMPLETE

* 05:12:05.979 Jun 10: ISAKMP: (1003): start Quick Mode Exchange, M - ID 2434392874

* 05:12:05.979 Jun 10: ISAKMP: (1003): initiator QM gets spi

* Jun 10 05:12:05.979: ISAKMP: (1003): lot of 41.223.4.83 sending my_port 500 peer_port 500 (I) QM_IDLE

* 05:12:05.979 Jun 10: ISAKMP: (1003): sending a packet IPv4 IKE.

* 05:12:05.979 Jun 10: ISAKMP: (1003): entrance, node 2434392874 = IKE_MESG_INTERNAL, IKE_INIT_QM

* 05:12:05.979 Jun 10: ISAKMP: (1003): former State = new State IKE_QM_READY = IKE_QM_I_QM1

* 05:12:05.979 Jun 10: ISAKMP: (1003): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE

* 05:12:05.979 Jun 10: ISAKMP: (1003): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

* 05:12:06.195 Jun 10: ISAKMP (1003): received 41.223.4.83 packet dport 500 sport Global 500 (I) QM_IDLE

* 05:12:06.195 Jun 10: ISAKMP: node set 169965215 to QM_IDLE

* Jun 10 05:12:06.195: ISAKMP: (1003): HASH payload processing
. Message ID = 169965215
* Jun 10 05:12:06.195: ISAKMP: (1003): treatment protocol NOTIFIER PROPOSAL_NOT_CHOSEN 3

0, message ID SPI = 169965215, a = 0x3AD3BE6C

* 05:12:06.199 Jun 10: ISAKMP: (1003): error suppression node 169965215 FALSE reason 'informational (en) State 1.

* 05:12:06.199 Jun 10: ISAKMP: (1003): entry = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY

* 05:12:06.199 Jun 10: ISAKMP: (1003): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

* 05:12:06.199 Jun 10: ISAKMP (1003): received 41.223.4.83 packet dport 500 sport Global 500 (I) QM_IDLE

* 05:12:06.199 Jun 10: ISAKMP: node set 1149953416 to QM_IDLE

* Jun 10 05:12:06.199: ISAKMP: (1003): HASH payload processing. Message ID = 1149953416

* Jun 10 05:12:06.199: ISAKMP: (1003): treatment of payload to DELETE
. Message ID = 1149953416
* 05:12:06.199 Jun 10: ISAKMP: (1003): peer does not paranoid KeepAlive.

* 05:12:06.199 Jun 10: ISAKMP: (1003): removal of HIS State "No reason" why (I) QM_IDLE (post 41.223.4.83)

* 05:12:06.199 Jun 10: ISAKMP: (1003): error suppression node 1149953416 FALSE reason 'informational (en) State 1.

* 05:12:06.199 Jun 10: ISAKMP: node set 613686650 to QM_IDLE

* Jun 10 05:12:06.199: ISAKMP: (1003): lot of 41.223.4.83 sending my_port 500 peer_port 500 (I) QM_IDLE

* 05:12:06.199 Jun 10: ISAKMP: (1003): sending a packet IPv4 IKE.

* 05:12:06.199 Jun 10: ISAKMP: (1003): purge the node 613686650

* 05:12:06.199 Jun 10: ISAKMP: (1003): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DEL

* 05:12:06.199 Jun 10: ISAKMP: (1003): former State = new State IKE_P1_COMPLETE = IKE_DEST_SA

* 05:12:06.199 Jun 10: ISAKMP: (1003): removal of HIS State "No reason" why (I) QM_IDLE (post 41.223.4.83)

* 05:12:06.199 Jun 10: ISAKMP: Unlocking counterpart struct 0x4B475724 for isadb_mark_sa_deleted(), count 0

* 05:12:06.199 Jun 10: ISAKMP: delete peer node by peer_reap for 41.223.4.83: 4 B 475724

* 05:12:06.203 Jun 10: ISAKMP: (1003): node-1860574422 error suppression FALSE reason 'IKE deleted.

* 05:12:06.203 Jun 10: ISAKMP: (1003): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH

* 05:12:06.203 Jun 10: ISAKMP: (1003): former State = new State IKE_DEST_SA = IKE_DEST_SA

* 05:12:25.187 Jun 10: ISAKMP: (1002): purge the node 1140237073

Installed IOS is c1900-universalk9-mz. Spa. 154 - 3.M5.bin

Before that, I had 15.3, same thing.

BGPR1 # running sho

Building configuration...

Current configuration: 5339 bytes

!

! Last configuration change at 05:19:14 UTC Friday, June 10, 2016 by boris

!

version 15.4

horodateurs service debug datetime msec

Log service timestamps datetime msec

encryption password service

!

hostname BGPR1

!

boot-start-marker

start the system flash0:c1900 - universalk9-mz. Spa. 154 - 3.M5.bin

boot-end-marker

!

!

logging buffered 51200 warnings

!

No aaa new-model

!

!

!

!

!

!

!

!

!

!

!

!

!

!

IP flow-cache timeout active 1

IP cef

No ipv6 cef

!

Authenticated MultiLink bundle-name Panel

!

CTS verbose logging

!

Crypto pki trustpoint TP-self-signed-

enrollment selfsigned

name of the object cn = IOS-Self-signed-certificate-

revocation checking no

rsakeypair TP-self-signed-3992366821

!

!

chain pki crypto TP-self-signed certificates.

certificate self-signed 01

quit smoking

udi pid CISCO1941/K9 sn CF license

!

!

username

username

!

redundancy

!

!

!

No crypto ikev2 does diagnosis error

!

!

!

!

crypto ISAKMP policy 1

BA aes 256

preshared authentication

Group 2

lifetime 28800

isakmp encryption key * address 41.223.4.83

!

!

Crypto ipsec transform-set Meridian ah-sha-hmac esp - aes 256

tunnel mode

!

!

!

Meridian 10 map ipsec-isakmp crypto

VODACOM VPN description

defined by peer 41.223.4.83

86400 seconds, life of security association set

the transform-set Meridian value

match address 100

!

!

!

!

!

the Embedded-Service-Engine0/0 interface

no ip address

Shutdown

!

interface GigabitEthernet0/0

Description peer na Telekom

IP 79.101.96.6 255.255.255.252

penetration of the IP stream

stream IP output

automatic duplex

automatic speed

No cdp enable

!

interface GigabitEthernet0/1

Description peer na SBB

IP 82.117.193.82 255.255.255.252

penetration of the IP stream

stream IP output

automatic duplex

automatic speed

No cdp enable

Meridian of the crypto map

!

interface FastEthernet0/0/0

no ip address

!

interface FastEthernet0/0/1

no ip address

!
interface FastEthernet0/0/2

no ip address

!

interface FastEthernet0/0/3

switchport access vlan 103

no ip address

!

interface Vlan1

IP 37.18.184.1 255.255.255.0

penetration of the IP stream

stream IP output

!

interface Vlan103

IP 10.10.10.1 255.255.255.0

!

router bgp 198370

The log-neighbor BGP-changes

37.18.184.0 netmask 255.255.255.0

10.10.10.2 neighbor remote - as 201047

map of route-neighbor T-OUT 10.10.10.2 out

neighbour 79.101.96.5 distance - 8400

neighbor 79.101.96.5 fall-over

neighbor 79.101.96.5 LOCALPREF route map in

79.101.96.5 T-OUT out neighbor-route map

neighbour 82.117.193.81 distance - as 31042

neighbor 82.117.193.81 fall-over

neighbor 82.117.193.81 route LocalOnly outside map

!

IP forward-Protocol ND

!
IP as path access list 10 permit ^ $

IP as path access list 20 permits ^ $ 31042

no ip address of the http server

local IP http authentication

no ip http secure server

IP http timeout policy slowed down 60 life 86400 request 10000

IP flow-export Vlan1 source

peer of IP flow-export version 5 - as

37.18.184.8 IP flow-export destination 2055

!

IP route 37.18.184.0 255.255.255.0 Null0

IP route 104.28.15.63 255.255.255.255 79.101.96.5

IP route 217.26.67.79 255.255.255.255 79.101.96.5

!

!

IP-list of prefixes Filter_IN_Telekom seq 10 permit 0.0.0.0/0

!

T-OUT route map permit 10

match 10 way

!

route allowed LOCALPREF 10 map

set local preference 90

!

SBBOnly allowed 10 route map

20 as path game

!

LocalOnly allowed 10 route map

match 10 way

!

!

m3r1d1an RO SNMP-server community

Server SNMP ifindex persist

access-list 100 permit ip host 37.18.184.4 41.217.203.234

access-list 100 permit ip host 37.18.184.169 41.217.203.234

!

control plan

!

!

!

Line con 0

Synchronous recording

local connection

line to 0

line 2

no activation-character

No exec

preferred no transport

transport output pad rlogin lapb - your MOP v120 udptn ssh telnet

StopBits 1

line vty 0 4

privilege level 15

local connection

entry ssh transport

line vty 5 15

privilege level 15

local connection

entry ssh transport

!

Scheduler allocate 20000 1000

!

end

BGPR1 #.

BGPR1 #sho cry isa his

IPv4 Crypto ISAKMP Security Association

DST CBC conn-State id

41.223.4.83 82.117.193.82 MM_NO_STATE 1106 ACTIVE (deleted)

41.223.4.83 82.117.193.82 MM_NO_STATE 1105 ACTIVE (deleted)

For "sho cry ipsec his" I get only a lot of mistakes to send.

For the other end, I had all the settings, I have no access to this device, they insist that this is a simple installation and that any problem is on my side.

I tried to juggle the order of the access list, life card crypto security association and all "googlable" solutions, that I could find.

Any input appreciated.

Corresponds to the phase 2 double-checking on the SAA, including PFS.
```
crypto ipsec transform-set meridian ah-sha-hmac esp-aes 256  mode tunnel
```

The ASA VPN help

Hello

The ASA is not my strong point. I had to make some changes to my ASA clients when the provider has changed. The ASA has been NAT would be an NTU gave us the previous provider, the new provider of the SAA is NAT had a modem. The only thing that does not work right is the VPN.

When IPSec VPN connects we cannot ping, telnet/ssh or RDP to one of imagine. My guess is that the ACL are not quite right. Could someone take a look at the config and propose something?

WAN - ASA - LAN (192.168.20.x)

I deleted the names of user and password and changed the public IP address around security.

ASA # sh run
: Saved
:
ASA Version 8.2 (5)
!
host name asa
domain afpo.local
activate the encrypted password of JCdTyvBk.ia9GKSj
d/TIM/v60pVIbiEg encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
address 192.168.20.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
PPPoE client vpdn group idnet
IP address pppoe setroute
!
banner exec *****************************************************
exec banner * SCP backup enabled *.
exec banner * SYSLOG enabled *.
banner exec *****************************************************
passive FTP mode
clock timezone GMT/UTC 0
summer time clock GMT/BDT recurring last Sun Mar 01:00 last Sun Oct 02:00
DNS lookup field inside
DNS server-group DefaultDNS
Server name 192.168.20.201
domain afpo.local
permit same-security-traffic intra-interface
object-group network GFI-SERVERS
object-network 5.11.77.0 255.255.255.0
object-network 93.57.176.0 255.255.255.0
object-network 94.186.192.0 255.255.255.0
object-network 184.36.144.0 255.255.255.0
network-object 192.67.16.0 255.255.252.0
object-network 208.43.37.0 255.255.255.0
network-object 228.70.81.0 255.255.252.0
network-object 98.98.51.176 255.255.255.240
allowed extended INCOMING tcp access list any interface outside eq https inactive
allowed extended INCOMING tcp access list any interface outside eq 987
interface of access inactive list allowed extended object-group GFI SERVERS off eq smtp tcp INBOUND
interface to access extended permitted list INCOMING tcp object-group GFI SERVERS off eq ldaps
access-list SHEEP extended ip 192.168.20.0 allow 255.255.255.0 10.0.0.0 255.255.0.0
access-list SHEEP extended ip 192.168.20.0 allow 255.255.255.0 172.16.0.0 255.255.255.0
access-list SHEEP extended ip 192.168.20.0 allow 255.255.255.0 172.16.0.0 255.255.255.128
IP 10.71.79.0 allow Access - list extended RITM 255.255.255.0 10.0.0.0 255.255.0.0
CLIENT_VPN list of allowed ip extended access any 172.16.0.0 255.255.255.128
Standard access list SPLIT_TUNNEL allow 10.71.79.0 255.255.255.0
Standard access list TSadmin_splitTunnelAcl allow 10.71.79.0 255.255.255.0
pager lines 24
Enable logging
logging trap information
asdm of logging of information
host of logging inside the 10.71.79.2
Within 1500 MTU
Outside 1500 MTU
local pool CLIENT_VPN_POOL 172.16.0.1 - 172.16.0.126 255.255.255.128 IP mask
local pool SSL_VPN_POOL 172.16.0.129 - 172.16.0.254 255.255.255.128 IP mask
IP verify reverse path to the outside interface
IP audit attack alarm drop action
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow 10.71.79.0 255.255.255.0 echo inside
ICMP allow any inside
ICMP allow any inaccessible outside
ICMP allow 86.84.144.144 255.255.255.240 echo outside
ICMP allow all outside
ASDM image disk0: / asdm - 645.bin
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 0 access-list SHEEP
NAT (inside) 1 192.168.20.0 255.255.255.0
public static tcp (indoor, outdoor) interface smtp 10.71.79.2 smtp netmask 255.255.255.255
public static tcp (indoor, outdoor) interface https 10.71.79.2 https netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 987 10.71.79.2 987 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface ldaps 10.71.79.2 ldaps netmask 255.255.255.255
Access-group ENTERING into the interface outside
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
RADIUS protocol AAA-server Serveur_RADIUS
AAA-server host 10.71.79.2 Serveur_RADIUS (inside)
key *.
RADIUS-common-pw *.
not compatible mschapv2
the ssh LOCAL console AAA authentication
Enable http server
Server of http session-timeout 60
http 0.0.0.0 0.0.0.0 inside
http 87.84.164.144 255.255.255.240 outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
resetinbound of service inside interface
resetinbound of the outside service interface
Service resetoutside
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
address DYN_CLIENT_VPN 10 of the crypto dynamic-map CLIENT_VPN
Crypto dynamic-map DYN_CLIENT_VPN 10 the value transform-set ESP-AES-256-SHA ESP-3DES-MD5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
crypto IPSEC_VPN 10 card matches the address RITM
card crypto IPSEC_VPN 10 set peer 88.98.52.177
card crypto IPSEC_VPN 10 the value transform-set ESP-AES-256-SHA ESP-3DES-MD5
card crypto IPSEC_VPN 100-isakmp dynamic ipsec DYN_CLIENT_VPN
card crypto IPSEC_VPN 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
IPSEC_VPN interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400
crypto ISAKMP policy 20
preshared authentication
aes-192 encryption
sha hash
Group 5
life 86400
crypto ISAKMP policy 30
preshared authentication
aes encryption
sha hash
Group 5
life 86400
crypto ISAKMP policy 40
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH enable ibou
SSH 0.0.0.0 0.0.0.0 inside
SSH 88.98.52.176 255.255.255.240 outside
SSH 175.171.144.58 255.255.255.255 outside
SSH 89.187.81.30 255.255.255.255 outside
SSH timeout 60
SSH version 2
Console timeout 30
management-access inside
VPDN group idnet request dialout pppoe
VPDN group idnet localname
VPDN group idnet ppp authentication chap
VPDN username password *.

a basic threat threat detection
scanning-threat shun except ip 10.0.0.0 address threat detection 255.255.0.0
scanning-threat time shun 360 threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
NTP server 130.88.202.49 prefer external source
TFTP server outside 86.84.174.157 /Aberdeen_Fishing_Producers_ (ASA5505) .config
WebVPN
port 4443
allow outside
DTLS port 4443
SVC disk0:/anyconnect-win-2.4.0202-k9.pkg 1 image
SVC disk0:/anyconnect-macosx-i386-2.4.0202-k9.pkg 2 image
Picture disk0:/anyconnect-macosx-powerpc-2.4.0202-k9.pkg 3 SVC
SVC profiles ANYCONNECT_PROFILE disk0: / AnyConnectProfile.xml
enable SVC
attributes of Group Policy DfltGrpPolicy
value of server WINS 10.71.79.2
value of server DNS 10.71.79.2
VPN - 10 concurrent connections
Protocol-tunnel-VPN IPSec svc
enable IP-comp
enable PFS
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list SPLIT_TUNNEL
afpo.local value by default-field
WebVPN
time to generate a new key of SVC 60
SVC generate a new method ssl key
profiles of SVC value ANYCONNECT_PROFILE
SVC request no svc default
internal TSadmin group strategy
Group Policy attributes TSadmin
value of server WINS 10.71.79.2
value of server DNS 10.71.79.2
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list TSadmin_splitTunnelAcl
afpo.local value by default-field
username password backup encrypted qwzcxbPwKZ7WiiEC privilege 15
backup attributes username
type of remote access service
admin Cg9KcOsN6Wl24jnz encrypted privilege 15 password username
attributes of user admin name
type of remote access service
tsadmin encrypted v./oXn.idbhaKhwk privilege 15 password username
R60CY/username password 7AzpFEsR ritm. O encrypted privilege 15
ritm username attributes
type of remote access service
attributes global-tunnel-group DefaultWEBVPNGroup
address SSL_VPN_POOL pool
authentication-server-group LOCAL Serveur_RADIUS
type tunnel-group RemoteVPN remote access
attributes global-tunnel-group RemoteVPN
address CLIENT_VPN_POOL pool
authentication-server-group LOCAL Serveur_RADIUS
IPSec-attributes tunnel-group RemoteVPN
pre-shared key *.
tunnel-group 87.91.52.177 type ipsec-l2l
IPSec-attributes tunnel-group 89.78.52.177
pre-shared key *.
tunnel-group TSadmin type remote access
tunnel-group TSadmin General attributes
address CLIENT_VPN_POOL pool
strategy-group-by default TSadmin
tunnel-group TSadmin ipsec-attributes
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:9ddde99467420daf7c1b8d414dd04cf3
: end
ASA #.

Doug,

The nat will knit from inside to out if the LAN is 192.168.20.0 nat should be like this:

access-list SHEEP extended ip 192.168.20.0 allow 255.255.255.0 172.16.0.129 255.255.255.128

Just to get this clear you use remote VPN, you must add the 192.168.20.0 to split ACL road tunnel:

SPLIT_TUNNEL list standard access allowed 192.168.20.0 255.255.255.0

-JP-

ASA VPN clients

I couldn't find the answer to this in google.

You have to use the anyconnect software or you can use other as openvpn client software to connect to your asa.

If it is for home, ASAs all equipped with 2 free licenses of AnyConnect Premium.

You can even set up a VPN SSL without client using those and does not any client software - a simple browser.

Purchase price for a small number of licenses AnyConnect is very cheap indeed.

You can use generic third-party clients for IPsec VPN IKEv1 (not for the SSL VPN client-oriented).

ASA VPN positive = SSL VPN?

Similar Questions

Maybe you are looking for