vSAN and control data
Hi guys, establishment of a POC on vSAN for the purpose of training / demo etc.
One thing I find frustrating is the apparent lack of control over it
I had a problem with one of my nodes in the cluster, and while waiting for a new game I built a lot of virtual machines with one of the nodes in maintenance mode. Now that my 3rd node is operational, it has filled the role of witness to all disks. How can I make vSAN set in motion of the actual data on the disc on this host? the issue I had with the host country was around storage, I want to start putting the host to the test in being more than a witness. Just the idea that I have at the moment is to put one of the other hosts in maintenance mode and chose full migration. I want more control than that, however, I want to control that hosts the component, and who are the witness at a granular level - is it possible?
Stuart
There are two actions that will force a re - balance components in a cluster VSAN. One is, as you mention, to place a host in maintenance mode (immigration, is full to move all of the components, or to ensure the accessibility and VSAN determine the items to move according to availability of objects policy). Another action that will force a re - balancing is a change of policy on the PAF for a group of objects. But in a larger perspective, the need to tune VSAN granulary didn't intend to the platform. The concept is to define your policies and VSAN will worry about the most optimally Balancing cluster. If some capacity watermarks are trigger one per level HDD, VSAN will be automatically re - balance as needed. If grain end control performance or availability is needed, it is provided by policies of PAF object level.
Tags: VMware
Similar Questions
-
Problem with iterator and EJB data control
My project components:
JDeveloper 12.1.3
Back end & the intermediate layer, JPA, EJB 3, controls data EJB
JSF pages simple front end (no fragment), bounded task flow
Hello
I have a weird problem with iterators in my project, project using EJB 3 & JPA and EJB data controls
When the user come to a page (this page is part of a stubborn workflow) and add a record to a table (linked to an iterator) and without saving changes, leave the page (means output delimited task flow)
do something else and again back to the first page iterator always keep this line is entry and it cause problems in my system
If I close the browser and come to this page for sure the line is not there
I expect when the user leaving a stubborn workflow each thing belongs to this workflow should be deleted. Is this true?
Or someone has the same problem? Any suggestions / or work around?
Respect of
Mohsen
Have you read the link I posted? Have you named the BA a transactional data control?
When you leave the workflow you issue a rllback and the new line should have disappeared.
Timo
-
Adding file control and the data file
Hello
I need to edit and add a control file and the data file to a database but its controlfile max and max datafiles parameters are reached. Is there any other step rather than create trace control file backup and change the db file and trace in nomount commissioning, please let me know.
Oracle version: 10g
platform: solaris.N °
-
Tab and control keys do not work the browser Firefox (my browser is up-to-date). The buttons work in IE and Chrome, however, until I realized that, I even changed my keyboard for a brand new, hoping that would solve the problem.
Hello arlusk, the problem is probably an extension that is not working properly. Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.
(If you use it, switch to the default theme).
- You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.
Once you get the pop-up, simply select "" boot mode safe. "
If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
When find you what is causing your problems, please let us know. It might help others who have the same problem.
Thank you.
-
manage requests between acquisition and control program using agilent 34970 A
Hello
I realized an acquisition program of data with labview and agilent 34970, real-time acquisition works very well with a time you sample of a second... There is no problem
to complete the program and control the taps installed in a photovoltaic system, pumping system
I realized that a second program for the controlit is functional
but the problem is when I merge the two programs in real-time
This error is present at the execution of two programs at the same time, that is to say that they launch two request at the same time the instrument 34970 A
(the poster of agilent 34970A labview crashes)-------------------------------------------------- --------------------------------------
what I want is to find a little thing programming to manage two outgoing REQUESTS at the same time in LabVIEW instrument and create a kind of delay between two REQUESTSSorry for the bad English
Thank you
If you are in the same executable, semaphores works well. You lock the semaphore before making your order and demand. Release after you get your data. If the lock is already taken, then the semaphore just will wait until the lock is available. Only one process can act both in this way.
-
Can I install video driver AMD and Control Panel on HP ProBook 4540 s?
Hello
I want to install driver video AMD and control panel alongside Intel video driverand Control Panel.
Here's my computer laptop Information System:
Name of the Microsoft Windows 8.1 operating system company
Version 6.3.9600 Build 9600
Another Description of the OS is not available
Manufacturer of operating system Microsoft Corporation
ROGUE system name
System manufacturer Hewlett-Packard
HP ProBook s 4540 model system
System Type x 64-based PC
SKU C1B74PA #UUF system
Intel Core processor i5 - 3210M CPU @ 2.50 GHz, 2501 Mhz, 2 Lossnay, 4 logical processors
BIOS Version/Date Hewlett-Packard 68IRR worm. F.50, 04/08/2014
SMBIOS Version 2.7
Embedded Controller Version 88.33
BIOS Legacy Mode
Baseboard manufacturer Hewlett-Packard
Model baseboard is not available
Name of plinth base
Role Mobile platform
State of secure boot not supported
PCR7 Configuration binding is not Possible
Windows directory C:\Windows
System directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
The local United States
Hardware Abstraction Layer Version = "6.3.9600.17196".
User name TuHiN\T u H i N
Bangladesh time zone standard time
Physical memory (RAM) installed 4.00 GB
3.88 GB total physical memory
Available physical memory 1.95 GB
7.88 GB total virtual memory
5.59 GB available virtual memory
Page file space 4.00 GB
Paging file C:\pagefile.sys
Hyper-V - VM monitor Mode Extensions Yes
Hyper-V - second level address translation Extensions Yes
Hyper-V - virtualization enabled in Firmware No.
Hyper-V - data execution Protection Yes
Hello:
From what I can find on the product number you posted, it only comes with the integrated graphics Intel HD 4000 which means that you can not install the AMD software because it won't do a thing.
That only works for laptops with AMD/Intel switchable graphics.
HP Probook s 4540 C1B74PA Core i5 - 3210M Ram 4 GB HDD 750 GB 15.6 inch
* ProcesseurIntel Core i5 - 3210M (2.50 Ghz, 3 MB L3 Cache)
* RAM 4 GB DDR3 BUSS 1333 Mhz
* 750 GB HARD drive -5400 RPM (SATA)
* Display 15.6 "LED
* Graphics Graphics Intel HD 4000
* Wireless 802.11 b/g/n
* External ports3.0/VGA/HDMI/RJ-45/ Headphone Out/Lan10/100/1000/bluetooth usb...
* Pin 6-cell
* Camera 1.3Mpx
* Weight 2.5 Kg
* OPERATING SYSTEM PC BACK -
need help with hex and handling data extraction
Hello
I have able to transmit hexagonal commands on the serial port of my camera and receive responses in hex him successfully. I was able to confirm this by changing the display format to the spell for the control and the indicator. Now, I want to store the portion of the hexagonal received data and use it in my future orders. Example of received data as below:
0001 1100 0010 E002 6 93 4D7E 2C4D AA66 F00D
The red blocks will be incorporated in the next command so that when I sent this command it will look like this:
F00D 0014 2000 0003 0000 0020 77AF E002 6 93 4D7E 2C4D
In short, send the command and get response, extract and store data in red blocks, then send different control that contains the data that is stored. Everything is in hexadecimal format. Question is how can I extract/store the bytes wanted to and then rebuild a hex command containing these bytes? Can I convert it to normal string, byte array, or hexagonal table? If we use the latest methods of 2 conversion, I need to ensure that the zeros are not lost.
I enclose my VI. Please take a look and help to provide a solution.
Thanks in advance.
Here, s what I had in mind (LabVIEW 2010):
-
What to do if your computer has been hacked or hacked and controlled by a remote elsewhere.
Original title: hijacked, hacked into the computerWhat to do if your computer has been hacked or hijacked and controlled by a remote connection
Furthermore. Many different programs added and if I try to uninstall or remove programs I don't recognizeI'm being denied access. I have cleaned, restored and repaired my computer several times and it keepshappens to me on my laptop and my PC computers. my user name is not changed, but the controlis not outside of me and they're using my name. Can anyone help?You must save your stuff important on an external and reinstall your entire system since the manufacturer's recovery partition. You can find instructions for this on the site of manufacturer support.
If you have no recovery partition, follow...
http://Windows.Microsoft.com/en-CA/Windows7/installing-and-reinstalling-Windows-7
Immediately after having re-installed, the next task is to make all Windows, including SP1 updates if your floppy drive or the partition recovery date before the service pack.
Then install your antivirus solution. Avoid using McAfee or Norton. It is a good solution, free and easy to use...
Microsoft Security Essemtials... http://Windows.Microsoft.com/en-CA/Windows/products/security-essentials
OK so far?
Then, change the passwords for all programs that interact with the Internet... This includes Facebook, Windows Live Messenger, Yahoo Messenger, Skype etc.
When you create a password, do NOT use real names and use a combination of numeric characters and alphabet, up and down case. It must be complex enough so that he could not be found in a dictionary, but not quite complex that you don't remember it...
-
Protect and control the license for ASA with the power of fire
I had 1 ASA 5515 initially delivered with the software cx, then made room for the software of firepower and got the virtual firesight for 2 devices and license of TAMAS tha L-5515, but this license was told only the URLs and malware license, I thought that this license was for all that since he has no other licenses in the data sheet and it's Reference with more features.
How can I get the license protect and control now so I can add the asa with the firepower to firesight and apply to all licenses
Thank you
Hello
L ASA5515-TAMAS = SKU license plans to "MALWARE" and "URLFilter" and legally gives the user to updates of the signature "PROTECT + CONTROL". It does not license "PROTECT + CONTROL". You need to buy "ASA5515-CTRL-LIC =" to license "PROTECT + CONTROL".
Please discuss a case with CISCO GLO, they can help provide a CTRL license
-DD
-
Dev 6i, 8i DB win 7,.
Hello
,
I have two blocks of data (master and detail), the master has a piece of text with a lov, I choose the lov and go to the retail block,
related article in the retail block is assigned the value of the master element. ,
what I want is to record the detail without a master, I did not need to register all of the values in the master, I just need him to get the value of the control text element in
in the field of retail?
How to do?
Thank you
I want all the features of master blocks / detail, I want to ask the captain to recover its data and detail data.
I want to ask the retail block,
There's something I've done, but I don't know if there is something wrong with it.
I created a "Sur-Insert" trigger on the main block and wrote "Null" inside, is there something wrong
With this solution?
Thank you
-
strategy of redo and control files
Excuse my ignorance in this area (not oracle or a DBA), but from a risk perspective, I read his best practices for storing a redundant copy of recovery logs and control files on a separate disk / server - for redundancy.
However, if the server is a server database physical, with local storage (in which case files of database and the oracle software resides), no configuration of cluster if the server dies a sudden death, then what exactly are the newspapers redundant recovery and control of files will save you of? Is it to minimize the loss of data, or else (told you I wasn't a DBA or Oracle guru). If you back up your recovery connects dialy then I don't know what exactly the redundant copies really are for/record you leave?
So if the server dies (and the storage is still ok) and then transport the storage to another server and you are in business again. Multiplexing or not does not change your ability to use another server.
In a disaster situation, where you lose the server and the storage is also lost, so you have to go to a backup and multiplexing saves you from what it is because the backup has only 1 copy of the controlfile and archivelogs.
If you get a logical corruption (IE a bug in the software) with controlfiles multiplex, then you're still screwed because all controlfiles are physical copies of each other, so all controlfiles have the same corruption. In this case, you must go to a good backup of the controlfile.
Multiplexing allows you to save when you get corruption Physics (due to the corruption of storage) of your command multiplex or multiplex redo logs file, and so you can use the good copy of the file control or redo logs to continue without losing the validated data.
-
How to save a calendar I created with the photo and the dates recorded on separate pages?
How to save a calendar I created in photoshop with the photo and the dates recorded in the form of two separate pages? When I save in pdf or jpeg, they are automatically save 1 pg with dates and photos on a single page. This is causing problems when I print.
Hi there, in which case your printer is not very large, you can also trim down the two versions and print them as separate documents.
(1) create a guide where you want to split the pages by clicking on the rule (hit control R if they are not displayed) and dragging to the desired location.
Create the Guide to make it so be precise in the way which divide you your page, and so that no part of the image will be repeated or lost.
(2) select the Cropping tool and adjust the area of culture at half top of your agenda, using the guide you have just made to align with the right place. Press return to complete the harvest.
(3) go in file > save as the. Name the file something like calendar_top and select the desired file format. Press "Save".
(4) once you return to your calendar file, go to the history Panel and select 'Guide to flirting This will bring you to step before you cropped the image.
(5) repeat the steps as before to the bottom half of the schedule, once more, using the guide to help you make your growing area.
Then you would just print each of the two pages individually. The images does not appear in a single document, but if you have Acrobat you could combine the files.
I hope this helps!
-
where is the location of the files in the tablespace and control
Hi all
where is the location of the files of the tablespace and control? TKSFor data files, ask DBA_DATA_FILES V$ DATAFILE
For TempFiles, ask DBA_TEMP_FILES or V$ TEMPFILE
For online redo logs, query v$ LOGFILE
For archived Redo Logs, query v$ ARCHIVED_LOG
for Controlfiles, query v$ CONTROLFILEHemant K Collette
http://hemantoracledba.blogspot.com -
Moving files from files/control/data files of recovery in a SAN
Hello world
Recently my body set up a San and I was instructed to move the data files of the current WINDOWS 2003 SERVER on the San. the way things are set up now, is that if I connect to my oracle server, I can see the local volumes on the SAN listed as disk drives.
I guess that software will remain on the oracle server, while the data files will be moved to the SAN. My question is what are the steps involved to address this question: can I first of all move DATA files, then the REDOLOG FILES, and CONTROL FILES? I never had to move my data files before on another server or on disk, so I'll just try get a feedback on the most convenient way to do so. Thanks in advance for the help.Hello!
To move the files to an Oracle database, you should close it. I guess that there are no problems with your San. I only describe the steps needed to move the files from a to b.
Movement of data - and redologfiles.
1.) query v$ data_fileSELECT name, file# FROM v$datafile;
This will give you a complete overview of the data files that you need to move.
2.) query v$ log_fileSELECT member FROM v$logfile;
This will give you a complete overview of the redologfiles, you need to move.
3.) stop your database.
4.) move all the data files to the new location.
5.) rename the data files in the databaseALTER DATABASE RENAME FILE 'old_path/filename' TO 'new_path/filename';
6.) move all the redolog files to the new location.
7.) rename the redologfiles in the database (see step # 5)
8.) create a pfile your spfile file (only if you use spfile)CREATE PFILE='C:\pfile.ora' FROM SPFILE;
9.) move your controlfiles to the new location
10.) Alter the CONTROLFILES parameter in the file pfile recently created.
11.) create a SPFILE from your newly created pfile.CREATE SPFILE FROM PFILE='C:\pfile.ora';
12.) start your database (and pray)
Yours sincerely
Florian W.
-
When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?
Disable the iMessage?
Maybe you are looking for
-
Pirrit - how Custom to restore your data without infecting a MacBookPro erased?
May 31, 2016, I started to get pop-up windows. The next day because the problem has gotten worse, I bought Bitdefender and downloaded MalwareBytes, which found and removed adwares/malwares. However, as CJ706 says, Bitdefender has continued to find
-
Satellite A300 - Question about BIOS password
Hello on the machine, I had a bios password set for the start.After that I put this password empty start it asks me for some other password enter the bios menu.I am able to boot up the laptop, launch Vista and do what I want to do besides enterering
-
I can't save the file to my external hard drive connected to my wireless router!
I have a wireless router netgear WNDR3700 with 'plug-and-play' feature that allows a home to simply connect your hard drive to your network. I managed it to get up and running, but I encountered some problems when I tried to save files on the disk. T
-
How can open 3GP video, I remove Open or save for a device browser dialog box?
How can I design the following? A user clicks on a link video 3GP appearing open using the browser on the device: private void launchBrowser(int browserType, String url) { BrowserSession browserSession = createBrowserSession(browserType); browserSess
-
Avast! Firewall NDIS Miniport filter failure #10
Avast! Firewall NDIS Miniport filter #10 failed (Instolling Device Driver for DROID X) MOTEROLA key USB PLUG and PLAY MOTEROLA USB Composit device READY to USE MOTEROLA USB Modem READY to USE MOTEROLA USB network driver READY to USE DRIOD X READY TO