vSphere HA is inside in vain. Operation is not allowed in the current state.

Similar Questions

• Error creating - snapshot operation is not allowed in the current state

  Hi all

  Using Veeam Backup & Recovery 6 software to replicate a LIVE VM (virtual MACHINE, 1). But I can't and I got the following error:

  Error creating - snapshot operation is not allowed in the current state

  The above virtual machine can only be copied when it is STOPPED the VM is running on ESXi 4.0.

  I have a more LIVE VM (virtual MACHINE, 2) on the ESXi Host which I was able to replicate successfully to another ESXi host.

  I contacted the Veeam Support before posting here.

  Things to note about VM 1: I can't take a snapshot manually from the vSphere client. This option is greyed (disabled) on VM1... While its OK on VM2.

  Veeam support told me that since its software uses the snapshot function of ESXi and this feature is disabled, replication cannot continue.

  Thanks for helping me on this.

  Exactly what I thought. When you delte this PCI passtrough your Backup Exec tape will not longer work.
  You will not be able to do replication when you use this passtrough.

  Only solution for replication (which is what I think you want for purposes of disaster) is to install a 3rd VM (or as physical) as "Backup Server" where you install Backup Exec and enable PCI-Passtrough to your tape drive. Then this new virtual machine with Backup Exec backup.

  After that you can delete the passtrough of your SBS and your replication will work.

  Sorry

  Concerning

  Simon

• "The operation is not allowed in the current state" message when you delete the folder

  I'm test ESXi 5.5 and mounted a datatsore of oriented export NFS in an attempt to redirect my ScratchConfig at this place. I found that I can create a folder in the datasore NFS fine but when I try to delete it, I get a message saying "the operation is not allowed in the current state. This happens on any of the files/sub-sub-sub-folders and only used account's root - I also confirmed that these directory drwxr-xr-x permissions.

  As suggested by KB1003829 which is a bit useful, but not really, I restarted the management on the host agents but it made no difference. Has anyone else seen elsewhere?

  I got this resolved, stumbling on the good guid for the NFS data store. Only after clicking around in WinSCP and realize that the NFS data store guid secondary, shorter - I then tried again to remove the original test directory and it worked.

  On a separate but similar note, then I tried to update my position zero config by applying this same guid with the command "vim - cmd hostsvc/advopt/updated updated ScratchConfig.ConfiguredScratchLocation string vmfs/volumes / [guid] / logs" (followed by a restart of the host) and it worked also.

• Unable to connect to the MKS: the operation is not allowed in the current state

  Hi all

  After the upgrade of vmware tools, we have a problem while safeguarding a guest vm with avamar. VM freezes and he said; "Unable to connect to the MKS: the operation is not allowed in the current state.  It can be stopped only by killing the task in the service on the host esx console.

  VMware vCenter Server 5.1 - 5.1.U1b - 1235232

  2013 12-19 T 00: 49:15.146Z | vCPU-1 | W110: MONITOR PANIC: vcpu - 0:NOT_IMPLEMENTED devices/vide/iovmk/videVMK-vmkio.c:1492

  2013 12-19 T 00: 49:15.156Z | vCPU-1 | I120: Core dump with construction build-1065491

  2013 12-19 T 00: 49:15.156Z | vCPU-0 | I120: Exit vcpu-0

  2013 12-19 T 00: 49:15.156Z | vCPU-1 | W110: Writing monitor corefile "/ vmfs/volumes/4ff12f8d-9d4d7a89-9341-e4135bb796b4/TEADEV/vmmcores.gz".

  2013 12-19 T 00: 49:15.202Z | vCPU-1 | I120: Save the anonymous memory

  2013 12-19 T 00: 49:15.209Z | vCPU-1 | W110: Dumping core for vcpu-0

  2013 12-19 T 00: 49:15.209Z | vCPU-1 | I120: CoreDump: dumping core with superuser privileges

  2013 12-19 T 00: 49:15.209Z | vCPU-1 | I120: VMK battery for vcpu 0 is 0 x 412248155000

  2013 12-19 T 00: 49:15.209Z | vCPU-1 | I120: Start monitor coredump

  2013 12-19 T 00: 49:16.454Z | vCPU-1 | I120: End monitor coredump

  2013 12-19 T 00: 49:16.455Z | vCPU-1 | W110: Dumping core for vcpu-1

  2013 12-19 T 00: 49:16.455Z | vCPU-1 | I120: CoreDump: dumping core with superuser privileges

  2013 12-19 T 00: 49:16.455Z | vCPU-1 | I120: VMK battery for vcpu 1 is at 0x4122481d5000

  2013 12-19 T 00: 49:16.455Z | vCPU-1 | I120: Start monitor coredump

  2013 12-19 T 00: 49:17.420Z | vCPU-1 | I120: End monitor coredump

  2013 12-19 T 00: 49:17.421Z | vCPU-1 | W110: Dumping extended monitor data

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | W110: A core file is available in "/ vmfs/volumes/4ff12f8d-9d4d7a89-9341-e4135bb796b4/TEADEV/vmx-zdump.000".

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: Msg_Post: error

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: fatal error [msg.log.error.unrecoverable] VMware ESX: (vcpu-1)

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120 + vcpu - 0:NOT_IMPLEMENTED devices/vide/iovmk/videVMK-vmkio.c:1492

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.haveLog], a log file is available in "/ vmfs/volumes/4ff12f8d-9d4d7a89-9341-e4135bb796b4/TEADEV/vmware.log".

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.requestSupport.withoutLog] you can ask support.

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.requestSupport.vmSupport.vmx86]

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120 + to collect data to be submitted to the technical support of VMware, run 'vm-support.

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.response] we will respond on the basis of your entitlement to support.

  We realized that the problem is our url filtering service checkpoint firewall. When we have disabled all begins to work very well.

• the operation is not allowed in the current state

  I have vm havea which leaves me not add more than 2 GB of ram. whether its hotadd or cold Add.

  ESX host has a lot of memory and no limits were set on the virtual machine.

  other virtual machines on the same host can add memory.

  This virtual machine is mounted on this host because of vmdirectpath

  This is a problem caused by the need of the reservation and the current HA admission control configuration. Defining a reservation for a virtual machine will increase the size of the slot and so reduce the number of places available in the HA configuration. In this case you may need to reconfigure the control admission HA parameter and change failover "cluster of chess hosts tolerate" by a percentage. Usually 100/number-of-hosts (for example 25% in a cluster of 4 guests).

  André

• vmrun return "this operation is not supported with the current permit.

  Hello

  I just installed the 5.1 esxi and I have 2 vm windows works well.

  I use the vSphere client to manage the hypervisor.

  I have not installed vCenter stuff, so it is just bare hypervisor os.

  When I ran the following:

  «vmrun t h 10.10.0.9:443 u vpxuser Pei xxx list esx»

  He returns with "this operation is not supported with the current permit.

  In fact, I have installed esxi5 on hypervisor licensing, do not know why I get this error message.

  Access the esxi5 through the sphere client works very well (I could create vm, take snapshots, etc.).

  Please let me know if I missed any steps. Thank you

  -antony

  Welcome to the community,

  with the free license of the hypervisor, access to vSphere API is restricted, which is most likely causing this issue. To unlock the API, you must have a paid license. Unless your host has already exceeded the 60-day evaluation period, you could try to revisit the evaluation mode to see if the command works as expected.

  André

• Subtract operation is not allowed on the parking METER, INTEGER operands to appeal

  I'm running a weird problem that I've defined a formula in the RPD to calculate the service life. When I bring this column with any other column made it gives me error: subtract operation is not allowed on the parking METER, INTEGER operands to appeal
  
  But if I set the same calculation in answers using the formula edit column it works very well. I need to define in the SPR for the column to be present for ad-hoc. Where is my mistake?
  
  Definition of the answers: case when "job events (Previous). "Rental Date #1" > ifnull ("job events (Previous)" "." ")" Date expression","job events (previous). "Rental Date #1") then cast (floor (case when "job events (Previous)". "))" "Rental Date #1" > ifnull ("job events (Previous)" "." ")" Date expression","job events (previous). "Rental Date #1") then the case when 'Employment events (Previous)' "." " Rental Date #1 "is not not null then TIMESTAMPDIFF (SQL_TSI_MONTH, 'Employment events (Previous)'". ")" Rental Date #1 "(, CURRENT_DATE) ELSE NULL END ELSE NULL END 12) as char) |' year (s) ' |" Cast (Mod (case when "job events (Previous)" "." ")) Rental Date #1 "> ifnull (" job events (Previous) "". "") " Date expression","job events (previous). "Rental Date #1") then the case when 'Employment events (Previous)' "." " Rental Date #1 "is not not null then TIMESTAMPDIFF (SQL_TSI_MONTH, 'Employment events (Previous)'". ")" Rental Date #1 "(, CURRENT_DATE) ELSE NULL ELSE NULL END, 12) as char) |' months ' end of another null"
  
  
  SPR: case when "Core". «Fact - job events ".» "" Date of hire "> IfNull ('Core'. «Fact - job events ".» "' End Date ', 'basic '. «Fact - job events ".» "Rental Date"(-1) then "
  Cast (floor (case when "basic".)) «Fact - job events ".» "" Date of hire "> IfNull ('Core'. «Fact - job events ".» "' End Date ', 'basic '. «Fact - job events ".» "Rental Date"(-1) then "
  case when "Basic." «Fact - job events ".» "' Rent ' is not null then TIMESTAMPDIFF (SQL_TSI_MONTH,"basic". «Fact - job events ".» (' ' Hiring date ', CURRENT_DATE) else null
  end
  Another null
  END/12) as char) |' year (s) ' | Cast (Modcase what of"basic". «Fact - job events ".» "" Date of hire "> IfNull ('Core'. «Fact - job events ".» "' End Date ', 'basic '. «Fact - job events ".» "Rental Date"(-1) then "
  case when "Basic." «Fact - job events ".» "' Rent ' is not null then TIMESTAMPDIFF (SQL_TSI_MONTH,"basic". «Fact - job events ".» (' ' Hiring date ', CURRENT_DATE) else null
  end
  Another null
  END, 12) as char) |' months '
  otherwise null end
  
  Help, please!

  Try this: -.

  case when "Basic." «Fact - job events ".» "" Date of hire "> IfNull ('Core'. «Fact - job events ".» "" Date of term ", TIMESTAMPADD (SQL_TSI_DAY,-1,"Core". "Fact - job events". "" Rental Date"))
  then
  Cast (floor (case when "basic".)) «Fact - job events ".» "" Date of hire "> IfNull ('Core'. «Fact - job events ".» "" Date of term ", TIMESTAMPADD (SQL_TSI_DAY,-1,"Core". "Fact - job events". "" Rental Date")) then
  case when "Basic." «Fact - job events ".» "' Rent ' is not null then TIMESTAMPDIFF (SQL_TSI_MONTH,"basic". «Fact - job events ".» (' ' Hiring date ', CURRENT_DATE) else null
  end
  Another null
  END
  ((/ 12) as char) |' year (s) ' | Cast (Modcase what of"basic". «Fact - job events ".» "" Date of hire "> IfNull ('Core'. «Fact - job events ".» "" Date of term ", TIMESTAMPADD (SQL_TSI_DAY,-1,"Core". "Fact - job events". "" Rental Date")) then
  case when "Basic." «Fact - job events ".» "' Rent ' is not null then TIMESTAMPDIFF (SQL_TSI_MONTH,"basic". «Fact - job events ".» (' ' Hiring date ', CURRENT_DATE) else null
  end
  Another null
  END, 12) as char) |' months '
  otherwise null end

• vmrun start leads to a "error: operation failed because of the current state of the system.

  Hello

  I am running the vmrun like this on the console command.

  / usr/bin/vmrun t CR h https://ourhost/sdk u ouruser Pei ourpwd start ' build001/build001.vmx [datastorename] '.

  I get the error text:

  Error: The operation has failed because of the current state of the system
  

  When I opened the Vsphere client, I see that the operation began, but also with an error: the operation is not allowed in the current state.

  I'm running on VMWare Vsphere Server Version 4.1.0 Build 258902

  How can I make sure via command line that the State of the system is correct. Is there a way to get corrected through an order status?

  When I try to power to the top of the image within the user interface, it works, but I need to know the opposite effect.

  Thank you.

  Hello and welcome to the forums.

  check via the State of the line of command of this virtual machine if necessary, unblock the process using vmsuport x how to show in this http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004340 Ko

• Game-CDDrive operation is not valid due to the current state of the object.

  It's been a while, please remind me how to put the code here? PSVersion 5.0.10105.0 VMWare PowerCLI AutoDeploy component 6.0 build 2358282 VMWare ImageBuilder PowerCLI component 6.0 build 2358282 license of VMware PowerCLI component 6.0 build 2315846 VMware vSphere PowerCLI component 6.0 build 2548068 VMware VDS PowerCLI component 6.0 build 2548068 Cloud of VMware Infrastructure Suite PowerCLI component 6.0 build 2548068 VMware HA PowerCLI component 6.0 build 2510422 VMware PowerCLI component Storage Management 6.0 build 2522368 trying to build a server from the ground using Powercli. Started with:

  $paramVM = @{

  VMHost =   $vmhost

  Version =   "v7"

      Name  =   "CompVM"

  Data store = $datastore

  DiskGB =   50

  DiskStorageFormat = "EagerZeroedThick"

  MemoryGB =   4

  NumCpu =   1

  Location =   $Folder

      CD  =   $true

  ResourcePool = $ResourcePool

  PortGroup = $portGroup

  Notes = "DC of DOM"

  Confirm =   $false

  }

  $paramVM . Location | select *

  New-VM @paramVM

  It seemed to go very well.

  Get-VM svr01mid100 | Start-VM

  Then, something isn't quite right.

  $paramNA = @{

  StartConnected =   $true

  WakeOnLan =   $true

  Connected =   $true

      Type  = « Vmxnet3 »

  Confirm =   $false

  }

  Get-VM chi01osm300 | Get-NetworkAdapter | Set-NetworkAdapter @paramNA

  , I get the error: Set-NetworkAdapter: 29/07/2015-18:44:36 Set-NetworkAdapter operation is not valid due to the current state of the object. Online: 9 char: 43 + Get - VM svr01mid100 | Get-NetworkAdapter | Together-NetworkAdapter @paramNA + ~ ~ ~ + CategoryInfo: NotSpecified: (:)) [game-NetworkAdapter], VimException + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.VirtualDevice.SetNetworkAdapter MacAddress: 00:10:56:ss:3f:ab WakeOnLanEnabled: true NetworkName: SameAsAbove Type: Vmxnet3 ParentId: VirtualMachine - vm - 108361 Parent: svr01mid100 Uid: /VIServer = Dom\[email protected]: 443/VirtualMachine = VirtualMachine-vm-108361/NetworkAdapter = 4000 / ConnectionState: logged, NoGuestControl, StartConnected ExtensionData: VMware.Vim.VirtualVmxnet3 Id: VirtualMachine-vm-108361/4000 name: NIC 1 Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient )

  Get-VM svr01mid100 | Get-CDDrive | Select Name,IsoPath

  Name IsoPath - CD/DVD drive 1 C:\ PS > Get - VM svr01mid100 | Get-CDDrive. Game-CDDrive - IsoPath $isoPath - StartConnected $true - confirm: $false Set-CDDrive: 29/07/2015-18:50:39 Set-CDDrive operation is not valid due to the current state of the object. I disconnected and then reconnected my session. I tried to see what was going on in vCenter (which I never do) and I fount it tries to start with the ISO, but giving a frown face and reboot again. I think that he did not like something in the build of the server. Help!

  I don't know that I did it is clear enough. The new VM script seems to work, it creates a new virtual machine.

  But eventually, every setting change that I try to do on the virtual machine, I get an error stating that "the operation is not valid due to the current state of the object."

  It seems to take the configuration but then I noticed he tried to start, but it started getting the error that I put in the screenshot.

  To me, that shows that it is trying to boot from the CD, because it is a Windows error.  Moreover, he just trying to start several times.

  Now, I went back and I think that the error "operation is not valid due to the current state of the object" may have been the fact that the VM tried to boot from the CD over and over, this is what is meant by the current state.

  I noticed just here, the hosts have 4.1 on them, which does not support r2 Server 2012.

  I think we're good.  Thank you!

• ERROR: New-Snapshot (the operation is not valid due to the current state of the object)

  Hello guys!

  I've been googlin everywhere, but impossible to find a solution to my problem. I hope that one of you, qualified people can point me in the right direction :)

  I created a powerCLI script to take a snapshot of our most important servers before we do our weekly maintenance. The idea to run the script as regular powershell script and then have

  1. Add snap-ins powercli and connect to virtualcenter servers
  2. ask the VC servers to virtual machines in a perticular folder
  3. Loop foreach on these servers to create a snapshot with the name $snapshotname

  Currently, I just do it turn on a test folder that I created in vSphere that contains 3 test VMs:

  • Testmagne1 - normal operation
  • Testmagne2 - I renamed the folder for this virtual machine in the data store to generate an error.
  • testmagne3 - normal operation

  Since the servers (not the test servers, but good ones) is the most important servers in our environment, I want to be able to catch exceptions and errors when I run this script. I do this with the Try - Catch - Finally works.

  The strange thing is:

  The release of Powershell/PowerCLI is different from the output in VirtualCenter (!)

  In virtualcenter, the output is as follows

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - the snapshot creation fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot is created successfully - as expected

  However, the exit in powercli is slightly different:

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - creation of the snapshot fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot fails with the error message: operation is not valid due to the current state of the object - huh?

  
  

  Apparently once the first error is generated all succeeding VMs get error "the operation is not valid due to the current state of the object"

  
  

  I've been pulling trying to figure this problem on my hair, but I'm not getting anywhere

  
  

  Here is some additional information:

  1. the Script (abridged version of it. It generates the same error):

  -STARTUP SCRIPT-

  $ErrorActionPreference = "stop".

  Add-PSSnapin VMware.VimAutomation.Vds, VMware.VimAutomation.Core | Out-Null

  SE connect-VIServer VIRTUALCENTER1, VIRTUALCENTER2 | Out-Null # Sensored VirtualCenter names

  $servers = get-VM-location 'testfolder '.

  $snapshotname = 'Testsnapshot '.

  $verifycreatesnapshot = Read-Host "you are about to create snapshots for $servers. Do you want to continue? o/n.

  If ($verifycreatesnapshot - eq 'y') {}

  Write-Host "snapshots of creation...". »

  {ForEach ($i in $servers)

  Write-Host "instant Creation for $i."

  Try {new-Snapshot - VM $i - name $snapshotname |} Out-Null}

  Catch {$_.exception | select *;} Write-Host "Unable to create the snapshot for $i" ;}

  }

  Write-Host "command finished.

  }

  else {Write-Host "Operation canceled by user"}

  Read-Host "end of the script. Press ENTER to close. "

  ------------------ END SCRIPT -------------------

  2. the PowerCli error messages:

  Error for Testmagne 2 (as expected):

  File: [DATASTORE114] testmagne2/testmagne2.vmx

  DynamicType:

  DynamicPropertyInternal:

  FaultCause:

  FaultMessage:

  ErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_O

  perationFailed

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction:

  SessionId:

  ConnectionId: /VIServer = SENSORED: 443 /

  Severity: error

  Message: 31/10/2013-10:52:16 New-Snapshot the operat

  ion for the entity 'testmagne2' failed with the follo

  the wing's message: "file [DATASTORE114] testmagne2/testmagn".

  E2.vmx was not found.

  Data: {ParameterValues}

  InnerException: VMware.Vim.VimException: exploitation of the entity

  'testmagne2' failed with the following message: 'thread '.

  testmagne2/testmagne2.vmx e [DATASTORE114] was not crazy

  ND ".

  TargetSite:

  StackTrace:

  HelpLink:

  Source:

  Failed to create the snapshot for testmagne2

  Error for testmagne3:

  Creation of snapshot for testmagne3

  ErrorId: Core_BaseCmdlet_UnknownError

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction: An error occurred when executing command: new-Snapshot. I have check

  f exception for more details.

  SessionId:

  Login ID:

  Severity: error

  Message: 31/10/2013-10:52:17 instant New-capture operation is not

  valid due to the current state of the object.

  Data: {ParameterValues}

  InnerException : System.InvalidOperationException: operation is not valid from

  e to the current state of the object.

  at VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCo

  reServiceProviderImpl.BeginTaskCompletionPoll (list 1 taskLi

  St)

  at VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskService

  Impl.WaitForTask (IEnumerable 1 taskList, ProgressCallback p

  rogressCallback)

  at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdl

  and. EndProcessingErrorHandled()

  at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseC

  mdlet. EndProcessingErrorHandled()

  TargetSite: Sub ThrowTerminatingError (System.Management.Automation.Err

  orRecord)

  StackTrace: At System.Management.Automation.MshCommandRuntime.ThrowT

  erminatingError (ErrorRecord errorRecord)

  HelpLink:

  Source: System.Management.Automation

  Failed to create the snapshot for testmagne3

  3 PowerCLI version

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.5 Release 1 build 1295336

  ---------------

  Versions of the snap

  ---------------

  VMWare AutoDeploy PowerCLI component 5.5 build 1262826

  VMWare ImageBuilder PowerCLI component 5.5 build 1262826

  License of VMware PowerCLI component 5.5 build 1265954

  VDS's VMware PowerCLI component 5.5 build 1295334

  VMware vSphere PowerCLI component 5.5 build 1295334

  
  

  4 VirtualCenter version

  VMware vCenter Server Version 5.0.0 Build 913577

  vSphere Client Version 5.0.0 Build 913577

  Hosts: VMware ESXi 5.0.0 Build 914586

  If you need additional information, let me know

  Any help is greatly appreciated

  Thank you!

  -Loincloth

  
  

  
  

  Definition - ErrorAction Stop locally on the cmdlet will not solve the problem. We have found and solved the problem and the fix will be available in the next version. Until then, you can use the $error variable to detect whether the cmdlet was successful or not. You can clear the $error variable before calling the cmdlet and check if it's still empty after the call.

• Virtual and models - computers cannot move the VM in the folder "operation is not supported on the object."

  Hey everybody,

  We are running vSphere 4.0. During the whole period that we used vSphere, we use vApps and Resource Pools hosts and Clusters to organize and manage the virtual machines used by our production team and test. From what I understand, this can be semantically incorrect (see: http://virtualizationreview.com/blogs/everyday-virtualization/2010/10/vsphere-folder-organization.aspx). So, I've navigated to models and virtual computers, created in folders with permissions of the user and tried to move their respective VMs to their folders... and I get the following error:

  "The operation is not supported on the object."

  So, should I go on the resolution of this or to leave things as they are?

  What are your opinions?

  Is there a right or wrong way to manage VMs of the multiple users?

  Thank you for your time and help,

  Johnathan

  Avinash21,

  Thanks for the tip.

  Move the virtual machines of the TIME solved the problem.

  When I suggest them to the root of the host, I was able to move in a user folder.

  Thanks again,

  Johnathan

• Linked clone failed: the operation is not supported on the object

  Hi all - I would appreciate help on a related clone operation that is a failure.

  I use Quest vWorkspace to create linked clone VM in my environment.  It integrates with virtual Center and creates from a VM snapshot parent according to normal related clones.  It has just stopped working and I am trying to track down the cause.  The task fails with the error message in the console of VMware vCenter: the operation is not supported on the object.

  The vCentre is 5.5 and esxi.  vWorkspace is v8.0 MR1.  The parent VM is located on an iSCSI datastore.  I tried to put the clones of destination on premises and warehouses of NFS data with the same result.  Unfortunately I can't (don't want really to) move the VM parent from the data store that I have of many VM related to this virtual machine.

  The failure message is a bit generic, so I looked on through the vmkernel.log and vpxa.log and it is an excerpt from the vpxa.log whereby it shows failed task 153.  Can someone please indicate something in the newspaper that had to be examined or another newspaper to look at?

  vWorkspace attached error and below:

  Linked clone has not CreateLinkedClone_Task of CloneVmLinked failed! Task of VMware CreateLinkedClone_Task status error - the operation is not supported on the object. -Call stacks-VmLinkedClone.VmLinkedCloneService.CloneVmLinked String vmInvPath, String strSnapshotMor, String strNewVmName, String strSysprep, ManagedObjectReference morFolder, ManagedObjectReference morResPool, ManagedObjectReference morHost, String strDatastoreName, Boolean bQuickPrep, String domainNameIP, String

  See attachments

  Thank you very much
  Wikus

  Additional accessories:

  • 
    Untitled picture.png

  Hello guys,.

  For those of you already on 5.5, I did a few tests these days. I did find a magic bullet yet as a single parameter that is sure to break but I came up with a workaround.

  I found that if my ESXi server was still on the 5.1, vWorkspace could deploy clones linked via vCenter 5.5 - it's only when the ESXi is also on 5.5 that you have a problem.

  If any of you have ESXi hosts still on 5.1, you can deploy there for now.

  In ESXi 5.x, it is easy to have an ESXi virtual machine. You might want to consider creating some virtual boxes ESXi to deploy on while the vworkspace dev team look at why it does not work.

  I know that this is not the best solution in the world, but it's better than no work around

  Thank you, Andrew.

• Operation not allowed on the shipment blocking event thread

  Dear friends,

  I'm sorry to put this problem, but I'm posting it after much searching this forum. Although the number of threads, the solution is available, but it does not work on me. On a thread, that the person wrote that he solved the problem, but haven't posted the solution how he had done this. The problem is:

  SerializableAttribute public class SmsDemo extends net.rim.device.api.ui.UiApplication {}
  Private SmsDemoMainScreen SmsDemoMScreen;
  Public Shared Sub main (String [] args)
  {

  SmsDemo SmsDemoApp = new SmsDemo();
  SmsDemoApp.enterEventDispatcher ();
  }
  public SmsDemo()
  {
  _Thread BackGroundThread = new BackGroundThread();
  _Thread.start ();

  SmsDemoMScreen = new SmsDemoMainScreen();
  pushScreen (SmsDemoMScreen);
  }

  class BackGroundThread extends Thread {}
  public BackGroundThread() {}
  / * initialize the constructor parameters * /.
  }

  public void run() {}
      
  net.rim.device.api.ui.UiApplication.getUiApplication () .invokeLater (new Runnable()
  {
     
  public void run() {}
                 
  try {}
  javax.wireless.messaging.MessageConnection msgConn = (javax.wireless.messaging.MessageConnection)javax.microedition.io.Connector.open("sms://:0");
  javax.wireless.messaging.Message msg = msgConn.newMessage (javax.wireless.messaging.MessageConnection.TEXT_MESSAGE);
  javax.wireless.messaging.TextMessage = (javax.wireless.messaging.TextMessage) msg txtMsg.
  txtMsg.setAddress("sms://+91123456789");
  txtMsg.setPayloadText ("Test Message");
  msgConn.send (txtMsg);
                     
  System.out.println ("sending SMS success!");
  } catch (Exception e) {}
  System.out.println (e.getMessage ());
  e.printStackTrace ();
  }
  }
  });
        
  }
  }

  The code above gives error "Blocking Operation not allowed on the event dispatch thread" to msgConn.send (txtMsg); line.

  Please guide me how to solve the problem for example. If possible, please guide me how to continuously listen to the incoming message also. The SmsDemo example with JDE is autonomous work fine but in error when incorporated in my solution.

  Thanking you in anticipation.

  I don't think you need to do invokeLater (new Runnable()... the inner thread.) Try to remove it, I think that this can cause this problem.

• Operations are not visible in the viewport in the develop module only in the browser window.

  1.I have a very strange problem with Lightroom 6.5 and earlier versions had some of the problems (so little reliable, because I don't know what time it will happen again) Lightroom if I work after a while, the following occurs: in the large screen of the applied rendering operations are not visible, only the small window of browser. In the middle of the screen is NOTHING done, so I continued to work on the image in the window of exploitation and not the image disappears, just a gray window remains above. Dan I switch to another view and then be visible again (but operations also do not appear this, only in small browser window displays the changes applied) I have to restart your PC for vouchers, which sometimes does not occur when you restart. Function the GPU turned power off.

  2. at this moment, there is a new problem starting.

  Lightroom begins only with color boxes in the grid, no image is visible

  
  

  My system configuration: Windows 7, 64-bit Intel Core i7 - 3770 k CPU 3.50 GHz 16.0 GB RAM ATI RADEON 4800 series

  This could be caused by a defective monitor profile.

  As a diagnosis too, l and, possibly, a temporary solution, try to set the monitor to sRGB profile.

  If this solves the problem, you need to calibrate the monitor with a standard material.

  This will create a new profile that accurately describes your monitor.

  Press the Windows key + R, type colorcpl, and then press ENTER.

  Add the sRGB profile, and then set as default profile.

  

• Error "operations is not supported on the object." when importing .ovf in the vCloud Director 5.5 machine

  I am trying to import a virtual machine (composed of three .mf, hard, .ovf files), when I try to download the VM, it gets downloaded 100% in the catalogs, but gives an error "Cannot create" as condition to the end and when I check the error in detail, it gives me that "operations is not supported on the object.". Checked the Virtaul Center, I get the same error that 'operations is not supported on the object."in the taskbar. Google it a lot but could not find a relevant solution.

  Just for the record I have DRS activated in full auto mode and only in the aggressive State.

  Can someone help me what I can do to remedy the problem.

  There are two parts to the upload.

  5.5 download dialog box represents the progression to the record of transfer vCloud Director of the FVO.  The download method is via the integration of Client plug-in (which uses the OVF tool).

  If the pop-up window can 100% success, I think that the element of the catalogue shows 50% and tries to download files to vCenter/ESXi as an import job.  If the import job fails, then you need to investigate the newspapers of vCenter/ESXi side for more details.