VTI problem

Similar Questions

• VTI VPN - problem

  Hello

  I'm trying to set up the VPN Site to Site between the CISO 3925 to PFsense firewall, phase one is in place, but when he tries to open the phase 2 I get an error to the PFsense firewall that said networks in SA is not configured properly

  as far as I know on the CISCO router that is configured with VTI I'm not supposed to set up a LAN and remote network's crypt just everything that happens in the tunnel

  How can I configure the second FW?  I tried all the options, including the tunnel of the implementation on the hidden face, without encryption, that everything works fine with tunnel genric.

  It's my configuration on the cisco:

  crypto ISAKMP policy 10

  BA aes 256

  preshared authentication

  Group 5

  ISAKMP crypto key XXXXXXXXX address ADDRESS-IP-PEER

  Crypto ipsec transform-set esp - aes 256 esp-sha-hmac YYYYY

  Profile of crypto ipsec ABCD

  game of transformation-YYYYY

  interface tunnel201

  Description *.

  IP 1.1.1.1 255.255.255.252

  no ip redirection

  no ip unreachable

  no ip proxy-arp

  IP 1400 MTU

  penetration of the IP stream

  IP tcp adjust-mss 1360

  load-interval 30

  tunnel MY IP ADDRESS source

  by the PEER IP destination ADDRESS of tunnel

  Profile of tunnel ABCD ipsec protection

  REMOTE to REMOTE-LAN subnet IP tunnel road 201

  It depends on the implementation of this 3rd party device. I got the impression which protect a tunnel interface.

  It seems that your box puts the card encryption on the public interface.

  Optionally, you can reach the management interface via the tunnel interface. If this isn't the case, you should return the config.

  The card crypto config seems to be the only way.

• Need of the ACL kung fu for VPN from Site to Site ACL problem

  Group,

  Have a little problem I know is related to ACL. I wanted to have a few experts to take a look at my config please. Here's the question:

  Attempt to create a site between two offices, but for some reason any that they cannot ping each other. It is a strange thing.

  97.XX.231.22 <-->71.xx.160.123

  I can ping both firewalls from the outside using a computer to another, but from the internal firewall utilities, they cannot ping each other. At the same time I can ping to their respective gateways.

  Secondly, I did an interior outside translation as you can see here for 80 & 443 preventing me from browsing http and https via VPN for Remote LAN, can it be modified to allow access? I can access when I dial in via VPN client but not via permanent VPN tunnel. Here is the config.

  no ip nat service sip 5060 udp port

  IP nat inside source map route SDM_RMAP_1 interface GigabitEthernet0/0 overload

  IP nat inside source static tcp 10.41.14.103 80 71.xx.160.123 80 extensible

  IP nat inside source static tcp 10.41.14.103 71.xx.160.123 expandable 443 443

  IP route 0.0.0.0 0.0.0.0 71.xx.160.121

  IP route 10.67.188.32 255.255.255.224 10.41.14.99 6 permanent

  IP route 10.67.188.96 255.255.255.224 10.41.14.99 8 permanent

  IP route 10.200.107.0 255.255.255.0 10.41.14.99 9 permanent

  IP route 10.200.110.0 255.255.254.0 10.41.14.99 7 permanent

  IP route 74.200.107.0 255.255.255.0 10.41.14.99 5 permanent

  IP route 74.200.110.0 255.255.254.0 10.41.14.99 4 permanent

  IP route 208.67.188.32 255.255.255.224 10.41.14.99 2 Permanent

  IP route 208.67.188.96 255.255.255.224 10.41.14.99 3 permanent

  !

  auto discovering IP sla

  Logging trap errors

  host 192.168.10.29 record

  access-list 2 Note HTTP access class

  Note access-list category 2 CCP_ACL = 1

  Note access-list 2 Platinum LAN

  access-list 2 permit 10.41.14.0 0.0.0.255

  access-list 2 refuse any

  Access-list 101 remark rules Master

  Note access-list 101 category CCP_ACL = 1

  Note access-list 101 FaxFinder WWW traffic

  access-list 101 permit tcp any host 71.xx.160.123 eq www

  Note access-list 101 traffic HTTPS FaxFinder

  access-list 101 permit tcp any host 71.xx.160.123 eq 443

  Note access-list 101 NTP Time Protocol

  access-list 101 permit udp any host 71.xx.160.123 eq ntp

  Access-list 101 remark IPSEC protocols

  access-list 101 permit udp any host 71.xx.160.123 eq non500-isakmp

  Access-list 101 remark IPSEC protocols

  access-list 101 permit udp any host 71.xx.160.123 eq isakmp

  Note access-list 101 traffic ESP

  access-list 101 permit esp any host 71.xx.160.123

  Note the access list 101 General License

  access list 101 ip allow a whole

  Note access-list 102 CCP_ACL category = 2

  access-list 102 deny ip 10.41.14.0 0.0.0.255 192.168.76.0 0.0.0.255

  Note access-list 102 IPSec rule

  access-list 102 deny ip 10.41.14.0 0.0.0.255 10.0.2.0 0.0.0.255

  Note access-list 102 IPSec rule

  access-list 102 deny ip 10.41.14.0 0.0.0.255 192.168.10.0 0.0.0.31

  Access-list 102 remark Platinum LAN NAT rule

  access-list 102 permit ip 10.41.14.0 0.0.0.255 any

  Note category from the list of access-104 = 4 CCP_ACL

  Note access-list 104 IPSec rule

  access-list 104. allow ip 10.41.14.0 0.0.0.255 192.168.10.0 0.0.0.31

  Note access-list 108 CCP_ACL category = 4

  access-list 108 allow ip 10.41.14.0 0.0.0.255 any

  Note access-list 109 IPSec rule

  Note access-list 109 CCP_ACL category = 4

  access-list 109 allow ip 10.41.14.0 0.0.0.255 192.168.76.0 0.0.0.255

  Note access-list 110 CCP_ACL category = 4

  Note access-list 110 IPSec rule

  access-list 110 permit ip 10.41.14.0 0.0.0.255 10.0.2.0 0.0.0.255

  not run cdp

  !

  allowed SDM_RMAP_1 1 route map

  corresponds to the IP 102

  There is more then one way how you can achieve this goal.

  (1) the best way is possible if the two VPN counterparts are IOS routers. Then you can migrate to virtual VPN - tunnel interfaces (VTI). With this, the external interface doesn't mix - and non-VPN-traffic VPN.

  (2) if VTI is not possible, you can restrict the translation to only non - VPN traffic using a roadmap:

  object-group network RFC1918

  10.0.0.0 255.0.0.0

  172.16.0.0 255.240.0.0

  192.168.0.0 255.255.0.0

  NAT-SERVER - 10.41.14.103 allowed 10 route map

  corresponds to the TRAFFIC-NAT-SERVER IP - 10.41.14.103

  TRAFFIC-NAT-SERVER extended IP access list - 10.41.14.103

  deny ip host 10.41.14.103 object-group RFC1918

  permit tcp host 10.41.14.103 eq 80 a

  allow a host EQ 10.41.14.103 tcp 443

  IP nat inside source static 10.41.14.103 71.xx... map route NAT-SERVER - 10.41.14.103

  What makes that?

  When your server communicates with a system with an address in the range RFC1918, then the road map does not correspond and the translation is not used. It is you, the VPN scenario. But if the server communicates with a non-RFC1918 address, then the translation is used and the server can be reached.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Unable to Scan to the computer after downloading macOS Sierra. Is this a software problem?

  How can I scan from HP Envy 4500 to computer after downloading macOS Sierra?

  Hello wdemetris,

  Thanks for asking for scanning helps here in the Apple Support communities. I understand how it is important to have access to your scanner and am happy to offer help for this.

  As a precaution, we always recommend that you have backups to make sure that all your data is safe. You can perform a backup using Time Machine and an external hard drive. Use this article to help make a backup of your Mac: use Time Machine to back up or restore your Mac.

  Then, in accordance with article help: printer and scanner for Sierra, El Capitan, Yosemite, and the Mavericks macOS software, the HP Envy 4500 e-all-in-one is supported for printing and scanning. The drivers must be installed, but if not, if it please go to the App Store and check the updates tab to see if there are updates for HP. If there is, please install.

  If you have only general questions about how to get your updated scanner in place or how to scan pictures, please check out these two articles: macOS Sierra: implement a scanner & macOS Sierra: scan images or documents. If everything is configured correctly and you still have problems scanning, please visit this help article: macOS Sierra: scanning troubleshooting.

  Thanks again and have a great rest of your day.

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.

• MacBook Pro display problem

  Hello members of the community.

  As of recently, I have noticed some glitches when feeding on my MacBook or awakened from his sleep.

  The colors are distorted, usually with pink, green, or yellow blobs. Blobs cannot entirely replace the colors, they appear to be contained in a element would normally be. For example. the menu bar will be partially pink and white, but pink does not leave the menu bar in this area, and the Office has green lines on it.

  I tried to take a screenshot, but the problem resolves in about 20 seconds, but it's a recurring problem.

  It happens when I wake up, connection or not. I had also certain powers serious and problems of performance, such that my MagSafe LED would not illuminate when plugged on rare occasions, fan could turn unnecessarily, graphics performance were SUPER slow, and the health of my battery was running out quickly. I actually ran a report on the system at 2 different times and my quality of full load is depleting of 1.2% per charge cycle, which is very worrying. I went from 6281 mAh mAh 6138 maximum capacity after two cycles of load. I'm tracking closely it because at this rate, my battery will survive only at load cycles about 150 instead of the 1000 expected, gives me the idea that this could very well be a bad battery. The computer is also warm to the touch while you sleep, not connected to the power supply. I NAP active but even taking into account should not be hotter my iPhone did the same thing.

  I have reset the SMC, and it solved a couple of problems. The charger works fine now and my performance improved considerably (which made me feel better, either it is a high-performance laptop, a 11-inch MacBook Air should not he surpass), and battery life has improved. I feel even if it uses a lot of power in his sleep. Maybe I need to turn off the NAP and see if that makes a difference. The graphic bug still persists however, and I don't have enough time to see if the max battery is depleting again.

  In regards to the bug, is there something that can be done? Basically, I want to assure you that I took all appropriate measures or if someone else has this problem to see if it can be software related instead of my computer.

  I have the entry level MacBook Pro with the retina, last generation.

  Any constructive contribution welcome!

  See you soon.

  -adreaux

  Hello bernardn753,

  After reviewing your post, it seems that you are having problems with the screen showing strange things on it. Looks like you already have a troubleshooting. I recommend you read this article, as reset NVRAM would be to reset your screen resolution settings that should help.

  How to reset the NVRAM on your Mac.

  Thank you for using communities of Apple Support. Good day.

• with IOS 10.0.2 - 5s iphone Bluetooth problems

  Since upgrading ISO 10.0.2 my M50 from PLT Plantronics (helmet unique headset) do not reliably connects with my iPhone 5 more. I have to go to the settings, activate bluetooth turned off/turned on, touch the device on the bluetooth page, etc. Once it connects successfully, it will reconnect (if I turn off the headset and turn it back on) for a short period. The next day he does not connect itself but I play with bluetooth on the iPhone again.

  It has always worked perfectly before the 10th of IOS.

  And, as I noticed others mentioning, the volume is much lower with IOS 10. The maximum volume is much lower. I can barely hear it now, more normal background noise, while driving.

  I did:

  Forget this device for the PLT M50 and paired again (several times)

  I did a Reset Network Settings

  I don't know what else to do - but it's a 10.0.2 IOS issue.

  Hello AppleUser2k,

  Please ask questions about your problems of connection between your iPhone and your Plantronics headset since you upgraded to iOS 10. I understand how important it is to have your Bluetooth devices connect with your iPhone with reliability. Here's what I recommend.

  The first thing we want to make sure is that all your data is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, try the troubleshooting steps in this article to help: get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device should also check with the manufacturer that the device has all the drivers and firmware to work with the new version of iOS.

  If you have checked everything and that you have installed the latest firmware or driver and always are problems, please be aware of your surroundings when you encounter these problems. If you can isolate the time or location, you see the problems, you can isolate the cause. You can even see this help article to ensure that you are not affected by outside interference: the potential sources of Wi-Fi and Bluetooth.

  Thanks again and have a great rest of your day.

• Problem after update 10.0.2 iOS iPhone touchscreen

  After I have updated to iOS 10.0.2, I noticed a problem with the touch screen. Using the position of the image on the right side, near the corner, the toushscreen does not work.
  For example: when you use the keyboard, I can't type the letter 'P', have trouble typing BACKSPACE. Using the Contacts app, I can't scroll through using the alphabet bar.

  Do what idea of the problem?

  Kind regards!

  Hi fabriciorela,

  Thanks for the upgrade to iOS 10! I understand that the right of your screen is unresponsive to the touch. You can try the steps in this link to fix the problem. If the screen of your iPhone, iPad or iPod touch does not respond to touch

  If it does not help the problem, try to restore the device to factory settings. I would like to backup your important data first.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Please use the Apple Support communities to post your question. Let us know how it turns out. Have a great day.

• Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

  After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

  I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

  But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

  Thanks in advance

  Hello StasV,

  Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

  Audio routing call - the iPhone user Guide
  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon!

• 2 iphones on one iTunes, problem of photo icloud account

  OK, my brother-in-law just updated its OS on his Iphone. He shared an Apple ID with his wife, who has his own iPhone. They all have two backup only in iCloud. His problem is that his wife photos are now on his phone. How can he fix it?

  Get its own identifier Apple- create and start using a Apple - Apple Support ID

• Problem activation ISO 10 September 2016

  After my Ipad iOS 10.0.2 update I could not activate because it says I am not access with the original Apple journal. Makes no sense. I bought the new Ipad in seven of 2013 Dabs.com. She has been linked to my Apple account 10 days ago (I deleted my profile by own Apple support Web site suggestion as a way to fix my problem, the other restoration/upgrade to the Ipad with ITunes update). I contacted the support of Apple (I have two numbers in case Apple). Asked Apple support to provide a proof of purchase I made. Told me now the reception that I provided does not correspond to my Ipad, but Apple isn't going to help with all the details to help to regularize the situation. The Ipad is mine and well was linked to my account from the date of purchase in September of 2013 until I removed it at the suggestion of site specific help from Apple. I now do not have access to my ipad £460 for more than 10 days and have lost money and time talking to 4 different cooperatives of Apple, after 6 calls and none seem able to deal with a ridiculous situation. Alexandre Vitorino (Apple) seems to have the best handle on weird how this situation is. Please can someone fix this? A software update on an Ipad that I own shouldn't stop me using it and then force me to prove that I admit actually before I use it again! I'm a professional businessman who uses it for meetings of the Council. I have a receipt for my camera and get treated like a kind of criminal.

  My sincere sympathy for those who can't find their original receipt or forget their original log-in Ipad because Apple does not help, you and your Ipad will be also useless mine is currently!

  If you are in the same situation please confirm to this post. I can't be alone, if she feels like it!

  Post edited by: cibble10

  Lock activation occurs when the ID of original Apple blocking it does not match with your current Apple ID.

  Until you can bring a receipt valid from an Apple reseller or authorized, it's nothing you can do.

  BTW, the polling stations in this Apple-owned forums is prohibited. You can review the terms of use.

• Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I've tried everything

  Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I tried everything, every single idea. Without success! Any other idea?

  For example, you specify that the device does not display the lock screen, correct? Do you use Touch IDS? If so, try to put your finger on the device to see if it's what he wants.

  See you soon,.

  GB

• icloud in the iPhone activation problem 6 more

  IM someone buy iphone 6plus they don't sign Apple ID and icloud, I reset my phone and now I'm still icloud activation problem.how can I do?

  You can not. The only way is if the previous owner release form their iCloud account. If they will not do for you, it means nothing to you.

• Phot of problem analysis

  Hello

  I have a problem with the app photo with Sierra.

  I 107755 pictures. the analysis of people started

  but he remains arrested with 519 photos

  I tried to fix the bookstore. restart analysis but still stuck to 519 phoos.

  Does anyone have the same problem and a solution?

  Thank you

  Thomas

  How long it has been blocked? You have a very large library so I keep the Mac awake and fed and the Photos doesn't work does not and give him a few days - usually messing slows it rather than speeding it and is a 'restart Yvert"command

  lN

• Problems with 10.0.2 update

  Hello

  I've updated my iphone 6 night on Sunday, October 02, with the 10.0.2 update of apple's software. At updating my iphone, it initially only allowed me to enter a number of characters in texts/emails and started to crash / black. I rebooted my iphone (turn turn off/lit) and it has stopped working all together do not allow me to enter a digital/access code footprint. The phone had left the charge and did not work for two days.

  Yesterday (Wednesday, October 05) I backed up my phone to the icloud and resinstalled scratch. After many hours of pursuit, my iphone allows me today, but again once hangs on applications and allows once again only a certain number of characters to type in any application.

  I am 37 weeks pregnant (considered term) and I need to access emergency calls in case my baby arrives more early. My husband works away and I have no family nearby.

  No idea how I get my iPhone to work entirely without crashing or return to the previous iPhone platform without having to now continue with local ACR? I need my laptop to work, mainly because of the situation, I'm in and need this sorting as soon as possible.

  Advice welcome.

  Thank you

  Sue - A

  Hi Sue - A Q,

  I understand that your device hangs after upgrade to iOS 10.2, and limit the amount of text, you can enter on the keyboard. Since the normal restart has not solved the problem, please try to backup the device and using iTunes to restore it to factory settings without restoring all the data. Instead, configure the device as good as new. You can use your iCloud Apple id to synchronize between your contacts and calendars, etc. Test question to verify that it has been solved. You can use the purchase history App store for re download your applications.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Download your latest purchases

  The links above should help you with the procedures, I suggested. Please use the Apple Support communities to post your question. Good day.