WAAS-DMM installation

Similar Questions

• Failure of the Installation SRE910 WAAS

  Dear Cisco support community,

  We have a SRE910 on Cisco2911 to be installed with WAAS. I downloaded the new package "waas-sre-Installer - 5.0.3 a. 7 - k9" and extract it to the FTP server.

  When I run the installation command, it start with the installation process. From the FTP server, I see that SRE download .install, .header and file .sre.

  However, the process just stop without any notification for more than an hour.

  It's the latest state of the installation of the WAAS:

  status of service-module sm1/0

  Service module is Cisco SM1/0

  Service module takes in charge the session via line ATS 67

  Service module tries to recover from the error

  Reset of the service of the heart rate Module is enabled

  Status of the service Module is not available

  Information resources:

  CPU frequency: 1865 MHz

  Memory size: 2530 MB

  0 disc size: 500107 MB

  Disc 1: 500107 MB size

  2: 2055 MB disk size

  Install the ftp: / / *: [email protected] / * *//waas-sre-installer-5.0.3a.7-k9/waas-accelerator-5.0.3a.7-k9.bin current

  Install status: waas-Accelerator - 5.0.3 a. 7 - k9.bin.install.sre asked to drop

  No local partitions

  We tried with another image WAAS: waas-sre-Installer - 4.2.3.7 - k9, however may not be installed correctly. It returns the error message:

  Loading waas-sre-installer-4.2.3.7-k9/waas-accelerator-4.2.3.7-k9.bin.install.sre!

  [OK - 1722/4096 bytes]

  Welcome to the installation of WAAS now check resources

  Check the full resource complete the installation

  The execution of the script waas-Accelerator - 4.2.3.7 - k9.bin.install.sre, abandoned installation failed

  When I cancel installation and do a session of SRE, it always reboot constantly. I wonder if I had a hardware failure.

  Help, please.

  BR,

  Imad

  Hi Imad,

  IOS is good, what software has been installed on the SRE when he came?

  Was it UCS?

  If so, can first set you the SRE IDE mode using the material utility as described in the following link:

  http://www.Cisco.com/en/us/docs/interfaces_modules/services_modules/sre_v/1.1/user/guide/software.html#wp1079944

  Then try to reinstall the software WAAS?

  Kind regards

  Nicolas

• error occurs, DMM software repair, error goes far - rinse and repeat

  This error first happened early last year, then it took place last month and now he's out twice this week.  What could cause a missing library repeatedly disappear?

  

  The error is in TestStand, but originally in in LabVIEW:

  

  I don't remember not what I did the first time I saw this error, but the last three times it happened that I fixed it by repairing OR DMM installation:

  

  Hi Jim,.

  I looked through the technical report and nothing really stood out. Something obvious that we could / should do is to 3.0.2, which is compatible with LV 8.2.1 OR DMM. Technical report, I noticed that you have LV 8.5, which supports the DAQmx 9.2.2 and the latest versions of our drivers. You can check if you have the same problem when the screws are saved in LabVIEW 8.5. "' To do so, you would just open your compilation project and the mass, or if it's just a VI go Tools" Advanced "mass compile. Let me know if any of these steps resolves the problem.

  Kind regards

• DMM 5.2 Installation on HP DL380

  I'm trying to get the DMM software installed on a HP DL380G5 which is the equivalent version of a MCS7835.   I need to get the working configuration started while I'm waiting for the customer to ship equipment.  The DMM software stands up and says that it is not material support.  Does anyone know how to get the software to load on this server?

  I'm sorry.  Software installed on a platform not supported is not allowed.

  In fact, as the Digital Media Manager DMS & Show products and sharing

  are "devices".  The software already installed on the server unless it is a

  upgrade to an earlier version.

  If you have a demo version of VMware images obtained from Cisco, these images

  It will work perfectly in a VMware environment on the HP servers.

  For additional help, please contact your team Cisco account to the local address or

  The sales representative.

  See you soon!

  T.

• DMM

  Hello

  H NIDMM 3.0.6 installation but I couldn't find examples in there.

  I have woul dsincerely grateful if you can help me to find the examples for the DMM OR C.

  Thank you

  -Sulva

  Hello Sulva,

  Examples in ANSI C are not installed by default. You will have to activate their installation by going to add/remove programs, and clicking on National Instruments software. In the list in the pop-up menu choose NOR DMM 3.0.6 and press the button Edit in the following pop-up window, navigate to Modular Instruments > NOR-DMM 3.0.6> > Microsoft Visual C++ Support and right click and select 'install this feature to local drive.

  Once this is done installing you should be able to find examples by going to Start > all programs > National Instruments > NOR-DMM > examples

• myDAQ new installation self-test fails 88705

  "' Problem: NEITHER myDAQ"myDAQ1"- Measurement & Automation Explorer-online devices and Interfaces-online OR myDAQ" myDAQ1 "-online self-test does not work. The error message is "the self-test. has failed. -88705 the specified device is missing... »

  My environment:

  8.1 Windows 64 bit running under Oracle VirtualBox Version 4.3.20 running Mac OS x on a MacBook Pro 2012 10.10.1. I have no prior exposure to work with myDAQ, LabView, or any tool of NOR.

  I downloaded NIELVIS1400_downloader.exe for Windows 8.1 to ni.com and it is finished.

  During installation I secured guarded against the problems of Win8FastStartup by stopping and restarting the PC when asked.

  After the installation when I plugged it physically in the myDAQ device, it was recognized by Windows 8.1 because Device Manager has the 'data acquisition' entries under which "NEITHER myDAQ" appears. For NEITHER myDAQ device status is 'this device is functioning.

  When the myDAQ was physically connected, the window "NI ELVISmx Instrument Launcher" popped up. I clicked on the icon 'How to set up your hardware' and the 'get started Guide... "pop up. I checked the blue LED on the device came and it is stable on. I went to "2. Paragraph confirms the recognition of the devices"in implementing on the way, guide and follow the instructions to start the automatic test. There not as described above.

  I noticed similar problems have been reported in the past. Closest to my problem reported by flex11 on 05/05/2014. Reading through I don't see any resolution itself. Another similar problem was solved by manually starting the service 'NOR device charger '. In my case, this service is already running. "NO license server" is the only service stopped, but I guess that's normal for myDAQ.

  I don't have any other product OR installed on the PC.

  I'm sure there is a simple solution to this problem, but I'm afraid it's escape. I'd appreciate any help I can get through this forum.

  Thanks for getting back to me. Your answer gave me stamina I had to move forward.

  I installed http://www.ni.com/download/ni-daqmx-14.2/5046/en/ and finally managed to do work. The exact boot sequence I need is:

  (1) delete myDAQ by USB port and then start Windows 8.1 under VirtualBox.

  (2) after that Windows 8.1 will appear, fix myDAQ on a USB port. If a pop-up window appears asking you to respond, ignore (at the beginning I did not ignore it and myDAQ transformed into a charger USB device firmware such as reported by Device Manager).

  (3) at this stage most likely "VirtualBox VM features-online USB Devices" drop-down menu shows "National Instruments NI myDAQ [0003]" as an entry but without a check mark to the left of the name. Bring the cursor to the left of the name and click here. You should now see a check mark there.

  (4) my myDAQ Self tests started working.

  However, I need the functionality provided by ELVIS as well. So I uninstalled http://www.ni.com/download/ni-daqmx-14.2/5046/en/ and installed from NI ELVISmx 14.0. My boot sequence that I have reported above, didn't work. Just at the moment it's just happened that Oracle has released Version 4.22 of VirtualBox that I wanted to try and ELVIS started to run. I can now use myDAQ DMM.

  One thing that contributed to my problems is fruitless attempts to uninstall the software OR. Unsuccessful uninstalls leave garbage behind who can or cannot cause problems in subsequent relocations. In one case, I'm done with the nidevldu (OR charger) service stuck in the system. I had to do a reset Windows 8.1 recovery operation to get rid of him. I decided to restart Windows 8.1 before uninstalling the software. This ensures that there is nothing in the limbo that past can interfere with a successful uninstallation.

• NOR-DMM vs IVI - DMM - Soft Front Panel

  Hi all

  I've developed a test application that will subsequently use a PXI-4070 DMM (currently simulating it OR max).  I used the IVI DMM functions, but ran into a problem when I couldn't do a diode test (diode test is apparently not officially normalized according to by IVI yet).  So I've been using the functions OR DMM. Essentially, it's a pretty seamless transition, but there is one thing that I was not able to replicate with the NOR-DMM simulation I could do with the IVI - DMM.  When I used the IVI - DMM features and ran the VI, an open popup that enabled me to get into the simulated value I wanted the DMM to read.  I can't get this to work with functions OR DMM.  Is this possible?  If Yes please let me know how to activate it.  Thank you.

  GSinMN

  The advanced simulation exists only on the level of Class IIA (IviDmm) driver. Class IVI drivers implement the functions of simulation using pilots of the simulation. IVI Compliance Package (PIC) installs a driver simulation for each class IVI driver. Each pilot simulation of plugs for the pilot of the corresponding class and performs the simulation of flexible output data. The NOR-DMM is a specific driver that supports the DMM series NOR and therefore does not include the functionality of advanced simulation.

• Installation for Windows Vista never ends.

  I'm having the same problem, installation seems good then never complete.  Thanks for the link.  I have read and tried these steps, always the same result.  Contacted dell but I am out of warranty so they sista waant 139 to tell me how to fix.  any other suggestions before I open my wallet?

  I ran Diagnostics and hardware controls ok.
  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_install/windows-vista-install-wont-complete/16a8d9c1-abcc-4dea-bb24-b9665e5c6c35

  Hello
  Thank you.  I tried the method of reference dell as well several other suggested in this forum, all would complement very well and then on first commissioning will hold to "install complete".
  The reason for the reinstallation of the operating system was that I wanted to reformat and completely erase HARD drive in an effort to restore the computer to the original performance.  It is a machine to friends and after 3 1/2 years, he has so much rubbish on what it is most exploited properly.

  Anyway, Yes, it was Dell F12 Diagnostics test.
  I read in another thread in this forum that others have this same problem and was mitigated by changing the native ACHI SATA.  I was able to change the setting of the ATA (do not know the difference?) and reinstallation completed successfully.  Now the machine works fine and everything is reloaded.

  Now my question is this; Fact is leaving the machine in ATA instead of DCIS in SATA?  I tried to change these settings back and the computer would not start.
  What is the difference?

  Thanks again, appreciate the answers and assistance

• SRI-WAAS, Manager of plant by the name of "No.-HOSTNAME".

  Hello!

  Im trying to record 4 ISR-WAAS to a manager of the plant, but every time I run the installation procedure, the first SRI-WAAS record well, but with the host name NON-HOSTNAME; and the next SRI WAAS also. For this reason, I got an error message that there is another device with this hostname and I can't change it! ...

  Already try the command hostname inside the console of the SRI-WAAS, but does not work... I also tried to change the host name in the Central Manager, but I can't find the way.

  Any advice?

  Thanks in advance.

  captura_de_pantalla_de_2016-08-28_17-57 - 59.png

  

  Hello

  Looks like you're having Bug CSCuu23859.

  The SRI-WAAS release notes say that this problem has been fixed in the software v5.5.5 (according to the screenshot you run v5.5.1)

  BugSearch CSCuu23859

  SRI-WAAS release notes

  Best regards

  Andreas

• WAAS upgrade help

  Hi guys,.

  I am WAAS upgrade to version 5.1.1 to 5.4.1a in Central Manager. It would be my first time. I downloaded a picture of ftp://xx.x.77.166/waas-universal-5.4.1a.17-k9.bin to the CM. I have not activated the automatic recharge. Once I have activate Auto Reload is only the installation of the software is done completely? After the upgrade is made for CM can I push the image and update the SRE engines?

  Thanks for your reply.

  Hi Vishnu,

  Basically, you must follow the procedure described here:

  http://www.Cisco.com/c/en/us/TD/docs/app_ntwk_services/WAAS/WAAS/v541/co...

  Since you already have downloaded the software of the MC (and I suppose you want to use the CM as the 'repository') you must do the following:

  1. Remember to create a backup of the CMS database and copy it somewhere outside the CM
  2. enable ftp on the CM server (inetd enable ftp)
  3. possibly create user name for using ftp (pointing to the CM itself)
  4. Save the image of the software on the CM (see guide) - click "Auto Reload" If you wish
  5. in the CM device - click Update
     1. now the software will be installed on the CM and CM will be recharging (if Auto Reload is enabled)
  6. Do the same for your remaining devices of WAAS - however I recommend that:
     1. Use the 'image of the accelerator only' for non-CM devices (it is 'only' 290 MB vs 395MB) which reduces transfer time
     2. Download and save this image similar to the universal image
     3. and follow the same procedure for each WAE/SRE/WAVE

  If you do not, click the "Auto Reload", you will need to recharge the device yourself... after the upgrade.

  Don't forget that WAAS 5.4.x is not supported on 274/474/574/674/7341/7371

  Best regards

  Finn Poulsen

• DMM worm 5.2.3 changing root PW

  Colleagues of Cisco,

  QUESTION:

  What are the potential impacts of the change to the superuser password?

  ENVIRONMENT:

  I have about 40 DMP on a very large company (several locations, Windows Active Directory, LAN, DMM & DMX), with the installation of pretty basic / default for most (schedules and users having control over their own content).

  WHY:

  My predecessor has left my organization and I am new this particular system, but this change is part of the policy here.

  LINKS:

  All hyperlinks to useful resources are greatly appreciated (although, please note that I already have the official Cisco docs, for example install/admin Guide).

  Thank you

  Paul

  REFERENCE:

  There is an excellent explanation of the procedure here:

  http://www.Cisco.com/en/us/docs/video/digital_media_systems/5_x/5_3/DMS/AAI/Administration/Guide/pwadmin.html#wp1079563

  .

  There is no impact.  The root password is used only to connect to the graphical interface of the DMM.  Now, if you were to change the password of the DMP in the DMM, then you must change it for your DMP or they would be disconnected from the DMM.  But the super user and the DMP passwords are two different things.

  Mike

• DMM 5.2.2 7835 H 2 DMM 5.4 VM migration

  Hi all

  We are running DDM 5.2.2 on a MCS 7835 H 2 Server and use only the DMP 4400.  We are looking to migrate to DMM 5.4 as using our software upgrade contract.  I went through the options options/upgrade of migration and to understand the process of having to go through the 5.2.2 > 5.2.3 > 5.3 > 5.4 > 5.4.1.

  But I don't have access to a a MCS 7835 H 3 or C210 server, but I have access to a C220M3.  Is there a migration route to take me to 5.2.2 for 5.4.1 running on our UCS B series taking place in VMWare 5.0?

  I saw the migration document that references the migration of 7835H 2 for the C210 to http://www.cisco.com/en/US/docs/video/digital_media_systems/hw/platform/migration/dmm-mcs-ucs.html

  But, as mentioned above do not have access to a C210 to undertake this.  Is there a way to take 5.2.2 configuration and this directly to import it into a new installation of 5.4 (I guess not).  can I use the C220 instead of the C210?  If possible can I run through the migration, do upgrades to get to DMM 5.4.1 install a double DMM 5.4.1 in VMware and backup the C220 and restore the installation of VMware?

  Thanks for any help.

  Concerning

  David

  Happy new year

  Hi David,

  You can see a similar description in the following thread:

  https://supportforums.Cisco.com/thread/2190258

  The answer is no, it is not a migration path official at this point if you have not already migrated it to C210 before, unfortunately. You need to trigger this to your Cisco team account in order to get help with this.

  Best regards and happy new year,

  Marco

• DMS 5.4 Lab (demo) non Standard installation

  OBJECTIVE:

  Install 5.4 on the available laboratory equipment.

  CURRENT SITUATION:

  I have the software for v.5.4 (iso images, with demo licenses, here are the exact versions).

  • DMM - 5.3.0.244.iso
  • DMS-UPG-later - 5.4.0.736.iso

  IDEAL & UNLIKELY SOLUTION:

  Install ESXi and then create a virtual computer, and then install on the virtual machine, or use something like that.

  POTENTIAL COMPROMISE:

  I was advised to try to "Trick" the installation program and install directly on bare metal.

  QUESTIONS RELATING TO THE:

  1. Can anyone here advise me on what to try everything first, the best options and last ditch effort?
  2. I could potentially get this install on naked, non-standard extra material metal (I've got 2 boxes sitting around, the two are FIRST-NCS-APL-K9)
  3. Additional advice or reference URL/Docs, you can offer?

  REFERRING URL:

  • DMS Guides install (including 5.4):
    • http://www.Cisco.com/en/us/products/ps6681/prod_installation_guides_list.html
  • VID PID PRIME-NCS-APL-K9 V01

    • http://www.Cisco.com/en/us/docs/wireless/NCS/appliance/install/guide/primencs_qsg.PDF

  • Hardware REQUIRED for DMM 5.4 VM:

    • http://www.Cisco.com/en/us/docs/video/digital_media_systems/5_x/5_4/DMM/VM/dmm54x_vm.html#wp44238

  

  Hi Paul,.

  You can not achieve what you're trying to do with standard DMS software. Which can be installed on hardware support.

  You must purchase the software Virtual DMM EGGS if you want to deploy a DMM as a virtual machine on custom hardware.

  Kind regards

  Marco

• Possibility of Waas designed

  Hello all.

  We have a depolyement, and here is the topology scenario:

  

  We have many user branches that tries to access servers in a data center.  but the problem is, branch and Datacenter WAE are not registered in the same CM.

  CM - 2 is not the replication of CM - 1.  In fact, they do not belong to the same management group.

  now with a topology like this, the optimization could be done for an outflow of the branch in the data center. If yes how?

  Is it possible to be a communication betwwen 1 CM and 2 CM?

  I know that automatic detection is a feater used by WAE to detect peers WAE.  but in the case of CM how could be given?

  Please, give me your feedback

  Hi Fawzi,

  What will you earn it?

  Basically the Central Manager is not necessary for the optimization to take place!    ... but it is strongly recommended to have a!

  Optimization will take place anyway, you can see in the display of the topology optimization peers (from the other area) are known only by their MAC address and not their name.

  However as the peers negotiate their optimization capabilities in each of its sessions of installation (for example, from the client to the server), they will only choose their common policies of optimization - for example if domain WAAS datacenter strategies specifies that a given application should be run with TFO, DRE and LZ and strategies of field of the 'branch' specifies 'pass-through' negotiated policy will be "costs".

  It would be preferable to use the same strategies in the two "fields".

  Of course you two points of management, but if this is a requirement for a reason, so be.

  But it would NOT inhibit optimization taking place!

  Best regards

  Finn

• How to configure a FTP server and the web and integrate with 5.2 DMM

  Hi all...

  I need to set up an external server only for publishing content to reduce the overhead of the DMM server.

  can someone guide me on how to configure the external server and it intergrate with the DMM 5.2

  Thank you

  semuthu,

  
  

  Notes from the Release Notes:

  
  

  Limitations of compatibility with Microsoft Internet Information Server (IIS)

  DMP who use firmware version 5.2 is compatible with a single version of Microsoft Internet Information Server.

  This supported version is IIS 6.0 for Windows 2003 Enterprise Edition. If you do not have the support for IIS version but

  want your DMP to recover the assets of a Web server, we recommend that you use Apache instead of IIS.

  
  

  
  

  I suggest to use Apache instead of IIS for the Web Server service. IIS can be used as FTP if necessary.

  There are a lot of Documents on the Internet concerning the implementation of Apache and FTP servers.

  
  

  Using Apache with Microsoft Windows

  http://httpd.Apache.org/docs/2.0/platform/Windows.html

  
  

  Quick HOWTO: Ch20: Apache Web Server

  _ http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO: _Ch20_:_The_Apache_Web_Server

  
  

  Once the Web server is configured and operational. You simply record your multimedia content on the Web server

  and then have your DMS assets in the library using an external URL address for its location.

  
  

  If you want to use the external server for other features in the DMM, you can see how to set up

  here:

  
  

  http://www.Cisco.com/en/us/partner/docs/video/digital_media_systems/5_x/5_1/DMM/user/guide/DSM+ETV.html#wp1073210

  Goto the section just below the CNSC & WAAS...

  
  

  If this answers your question, take the time to mark this

  discussion answered & rate the answer.

  
  

  Thank you!

  
  

  T.