WAG160N & WRP400 helps wireless

Similar Questions

• Help wireless with a necessary Satellite Pro A10

  Hello I just bought a Toshiba Satellite pro A10 psa15e-03u82-en of second hand and I'm having trouble with the wireless option. This computer is equipped with a built-in wireless card?
  The light on the switch doesn't switch on when on is selected and there is no wireless option in Device Manager.
  But if you go to the support page for driver download at the web site of Toshiba drivers for wireless utilities!
  Is the map or can it be mounted under a removable hatch on the base of the laptop?
  Any help will be greatly appreciated a lot

  Hello

  the problem is that wireless is delivered optionally with this machine. This means that the machine does MUST NOT have wireless but can be equipped or bought with the wireless option added.

  You can only do the following: you can get a mini-pci wireless card (I suggest atheros, gently work cards in almost all machines) or you take the PCMCIA wireless card, so Don t you have nothing to install ON your machine.

  In the case of a mini-pci card, you can improve your machine by removing a cover on the bottom (should be more on the front of the machine) and then put the card carefully into the slot. And CAREFULLY stick antenna that plugs into the connectors on the Board. They cable cannot be repaired if you damage one of them.

  It would be better to look for a technician and allow it to install the card. I think it should be much safer. ;)

  Welcome them

• help wireless

  I have a compaq laptop and the adapter wireless uninstalled itself, I called the assistance company, and they told me it would cost me $99,00 for them to tell me how reinstalled. Could someone help me please?

  Hello

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  Compaq - support, drivers and documentation online
  http://www.Compaq.com/country/cpq_support.html

  Compaq (HP) - Forums
  http://h30434.www3.HP.com/PSG/

  You can download the drivers on another computer and transfer to it on removable media
  as the readers of CD, DVD or USB.

  Or, if possible, use a wired to your router to download the WiFi driver.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Help: wireless network settings changed on the router but loss of hp install cd for pro8000 wireless

  HP Officejet Pro 8000 A809 Wireless

  Mac OS 10.6 and 10.7

  I changed my router wireless network settings and now I need to change on my printer so it can join the network.

  Problem is that I throw my installation CD and it seems that you need to change the settings?

  I connected via USB and downloaded the driver on the net and reinstalled but don't see an option or a chance to set the printer wifi options.

  I tried to reset the printer settings wifi with three taps of the paper button while now thought wireless button I'd see change options only when usb connected, but I did not.

  It seems weird and archiac you would need the physical disk to make the required changes.

  Any help would be appreciated.

  Hello

  Temporary connect the USB printer to a Mac.

  Applications > Hewlett-Packard > utility device, run the installation wizard.

  Select the printer and then follow the on-screen instructions to configure the wireless connection.

  Please let me know of any questions,

  Shlomi

• DRIVER INFO ASAP for College (girls) need computer Formated it no help from dell to get the driver for the FRANTIC MOM HELP wireless connection

  I formatted my daughters lap top. She needs them for the College yesterday.

  I have the disk drives and utilities, but dell will not help me as to what drivers I need to install for the wireless connection.

  I have a Dell inspiron N5010.

  Because it's a third party BAUGHT and PAID for Lap Top

  Dell refuses to help me :(

  Someone please HELP ME she needs her computer.

  I just let drop his ff to the College yesterday

  Once I have understand that I have to drive 1 AND a HALF HOURS to him

  Thanks wh ANYONE could help me out here

  Frantic mam s :) Sherry

  Sherry

  Dell is like that.  I'd go to at support.Dell.com and use of the tag numbers of express service (at the bottom of the computer) go to drivers > service tag in > find driver for wifi > download and install.

• (need help) wireless problem...

  Hello guys... I'm new here... OK, that's my problem, and I hope that you guys can help me...

  yesterday, I received a new computer laptop lenovo x100e, its happened with windows 7 starter... but now I have upgraded to windows 7 ultimate... the problem is, I can't access the network using wireless... my driver name is express 11 11 b/g/n wireless LAN Mini-pci adapter...

  I hope someone can help me...

  Thank you

  Fatou

  Here is the driver http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73701

• R60e helps wireless

  Hello

  I have a R60e 0658-A69. I can't find any specific information on this model and it leads me to madness. Is could someone please tell me if this model includes a default wireless card?

  Hello scroamer, welcome to the Lenovo forums!

  Here you can see, that there is no wireless card installed, but you have a wireless option.
  I Don t now exactly if it means that the antennas are installed, too.

  You can also check your device manager, if there is a wireless card installed.

  Unfortunately the search for parts on the work of doesn´t support page.

• help wireless problem!

  I have a hp compaq nx6125 laptop, I have re installed widows xp. I downloaded and installed all the drivers. the wireless button when pushed does not illuminate. When you press the hp wireless assistant appears and it show wlan disable or turn off. any ideas, I had the drivers off site Web hp

  No Wireless Assistant not offers the possibility to activate? A couple of things to check. Look in Device Manager to see what wireless status. Enter in BIOS to power to see if there's an option to turn on wireless.

• x220t - help wireless adapter

  I just bought a x 220 tablet on the lenovo Web site. I missed a linux installation and was forced to reinstall windows 7.  After installing windows 7 again, the wireless doesn't work anymore, even though I installed the drivers from the lenovo site. When I look in the hardware Manager, it says the device network controller driver is not installed, which I assume is related to the wireless problem. EVeRyThiN g remains on the laptop works very well, even the wired network card.

  All I have this problem, or can point me in the right direction?

  Thank you.

  John

  I solved the problem. Apparently the installer does not completely install the wireless card. After Setup is finished, you will have to go to the network controller is not installed in the hardware Manager and that it points to the directory where the installer put the files.

• Wireless router WRP400 WAP54G Point Wireless WPS54G print server Wi - Fi

  I have a router broadband wireless Linksys WRP400 with 2 phone ports and a Linksys WPS54G wireless print server. Unfortunately, the signal is too weak to detect the wireless Print Server 20 meters/yards away at the other end of the House. (Works fine when they are close together).

  Linksys Help Desk told me that a WRE54G amplifier is not useful to extend range, because they will have only a helping hand signal by 50% compared to a WAP54G wireless access point that they recommend.

  Can you suggest the best way to increase the signal between a WRP400 router and a wireless WPS54G print server? Would a WAP54G wireless set to halfway between the two (or in some other way) is working to boost the strength of the signal between WRP400 router wireless and wireless WPS54G Print server?

  I don't want to have to wire all devices.

  No forum topics cover using the WPS54G and WRP400 together, hope I can push the signal strength wireless - thanks for your help.

  Try WAP54G...

• OfficeJet Pro 8625: HP8625 sleep mode/wireless network connectivity

  I recently bought an OfficeJet Pro 8625 and it worked fine for a few days, with everyone in the House, being able to print wireless connection network (Verizon FIOS via an Airport base station).  However, now it won't keep (or restore) a Wi - Fi connection after going to sleep.

  I can get the printer to work, if I turn it works, then immediately print (but only one machine... If I need to print from two different computers, I have to restart again to use the second computer).

  This is the case for all computers in my house - using several OS X (El Capitan, Mavericks and Snow Leopard) and the other with Windows 10.  I tried the troubleshooting tips that I could locate, and the firmware is up to date.

  I should be able to send a document to the printer from anywhere in the House, from any computer, without walking to the printer and restart it first.  A network printer should be sprained able himself, reconnect to the wifi and print jobs sent to it, but mine doesn't.

  How can I solve this problem?

  These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

  While the DHCP is convenient, devices like printers must always be assigned an IP (fixed) manually to avoid conflicts on your wireless network.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).
  2. Or check in the printer "Auto off" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check the properties of your printers.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. If necessary and you have assigned a static IP address, try using auxiliary for the preferred DNS Server 8.8.8.8 and 8.8.4.4 as DNS server.
  5. Wireless printers work only on the 2.4 Ghz band.
  6. Make sure the printer is on the latest firmware by checking with the HP support site.
  7. Check all devices wireless in your home for interference. Check microwave, babyphones, phones, wireless and wireless alarm systems are a big culprit. Any of these will knock at your printer wireless intermittently.
  8. Make sure that your printer and router are at least 6 feet, independently of the other.

  In the router: (refer to the manual of your router for more information)

  1. Use a fixed wireless channel as the 1, 6 or 11, never 'auto', try channel 1 first then the rest.
  2. Set the router to 20 Mhz only or 145Mbps router function.
  3. Always use WPA2-AES encryption (personal), but you can try the "mixed" mode
  4. Disable the WPS and never use it and disable the UPnP for the security of routers. No one can hijack your system now and help with wireless connectivity (if you want to know why, research on the web).
  5. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure the SSID is NOT identical, they must be different for all the bands, even for networks without comments.
  6. SSID broadcast should be enabled.
  7. Save all the settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.
  8. Marketing the printer and check that it reconnects to the router.

  Windows 7/8/8.1 is discovered the system on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
  2. Under home or work (current profile) / network discovery.
  3. Select "Turn on network discovery" and save the changes.

  Now last thing to do once everything above has been tried and you still have the same problem, completely uninstall and delete the printer and its software.

  Use http://www.iobit.com/en/advanceduninstaller.php and powerful Scan at the end.

  Now go back and reinstall the drivers and full software on the HP website.

  Last resort effort - if your printer has an Ethernet connection, suggest you to get some adapters line and convert your Ethernet wiring for your printer.

• Want to 4500 Series: I still need to be able to recycle router/printer on my home network wireless daily

  Several devices were all printed on home wireless network, but often the message of the printer is offline. Scan doctor suggests power recycling the router/printer, which seems to work but which is very annoying when it happens every day. y at - it a fix for this problem

  These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

  While the DHCP is convenient, devices like printers must always be assigned an IP (fixed) manually to avoid conflicts on your wireless network.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).
  2. Or check in the printer that ' Auto Off/sleep/power saving mode ' is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check the properties of your printers.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. If necessary and you have assigned a static IP address, try using auxiliary for the preferred DNS Server 8.8.8.8 and 8.8.4.4 as DNS server.
  5. Wireless printers work on the band Wireless 2.4 Ghz not the band 5.0 Ghz.
  6. Make sure the printer is on the latest firmware by checking with the HP support site.
  7. Check all devices wireless in your home for interference. Check microwave, babyphones, phones, wireless and wireless alarm systems are a big culprit.  Any of these will knock at your printer wireless intermittently.
  8. Make sure that your printer and router are at least 5 feet independently of each other.

  In the router: (refer to the manual of your router for more information)

  1. Use a fixed wireless channel as the 1, 6 or 11, never 'auto', try channel 1 first then the rest.
  2. Set the router to 20 Mhz only or 145Mbps router function.
  3. Always use WPA2-AES encryption (personal), but you can try the "mixed" mode
  4. Disable the WPS and never use it and disable the UPnP for the security of routers. No one can hijack your system now and help with wireless connectivity (if you want to know why, research on the web).
  5. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure the SSID is NOT identical, they must be different for all the bands, even for networks without comments.
  6. SSID broadcast should be enabled.
  7. Save all the settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.
  8. Marketing the printer and check that it reconnects to the router.

  Microsoft has announced an update of Windows for the detection of device address... mode devices .waking 'sleep'. Update your Windows 10.

  https://support.Microsoft.com/en-us/KB/3147458

  If you have Windows 7/8/8.1 discovery network is on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
  2. Under home or work (current profile) / network discovery.
  3. Select "Turn on network discovery" and save the changes.

  Now the last thing to do once everything above has been tried and you still have the same problem, completely uninstall and delete the printer and its software.

  Use http://www.iobit.com/en/advanceduninstaller.php .  Use of the powerful scanner at the end to remove all registry entries.

  Now go back and reinstall the drivers and full software on the HP website.

  Last resort effort - if your printer has an Ethernet connection, suggest you to get some adapters line and convert your Ethernet wiring for your printer.

• Photosmart HP 7520: All wireless network devices will lose connectivity after printing

  Dear all, 
  
      I have a problem with my HP Photosmart 7520 printer where all wireless network devices will lose connectivity after a printer has been sent to the printer.
  
  * Summary
  Wireless network unusable after sending one print to HP printer
  No device ( computers nor smartphones ) can use the Internet nor access internal networks ( 192.168.0/24)
  
  * Details
  Turn HP printer on.  ( wireless direct is off - never turned on )
  HP printer connects to working wireless network.
  Other devices ( phone/computers ) already connected and working.
  From any device, send a document to the printer.
  Printer prints document successfully.
  Immediately after printer has printed all devices cannot access internet IP range ( including HP printer ) nor Internet nor router ( 198.168.0.1 ).
  
  * Reproducibility
  Always
  
  * Work around
  Disconnect all devices from the network.
  Power off printer.
  Reboot Internet router.
  
  * Attempted solutions
  Removed wireless configuration.
  Factory reset.
  Added wireless configuration back.
  Powered on and off printer.
  
  * Printing tested with
  Tested with Macbook10.11/Windows 8/Ubuntu 12/Android 4.4.2
  
  * Not tested
  Ethernet cable directly connected to router.
  
  * Internet Router
  Netgear CG 3700
  

  Number of brand and model of the router?

  These settings are to set up your printer wireless (or wired):

  • Stay connected to your router
  • Trouble printer status 'offline '.
  • Wake mode 'sleep'
  • All wireless devices stay better connected

  While the DHCP is convenient, devices like printers (wired and wireless) should always be assigned a (fixed) IP address manually to avoid conflicts on your wireless network and must be outside the range of the router DHCP.  After the adjustment of the static IP address the computer must be updated to show a Standard TCP/IP port with the IP address of printers under printer properties/Ports.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here and here and still more here.  Video here explains the problem and how to solve the problem. <--> So watch this!
  2. Or check in the printer "Auto Off/sleep/Energy Saving Mode" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check your printer properties.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. Make sure that the printer is connected directly to a socket wall and not to a UPS, power strip or a lightning arrestor. This will cause the printer to drop offline connection and disconnection (checked yes!).

  Additional measures to take if you continue to have the problem (if they are posted)...

• laptop of the child is not able to connect to internet even though I have a westell wireless

  so, how can I solve this problem, friends weeks before no problem could get on the internet from their laptops with the wireless westell router for ATT but limited access now so that they can not get on the internet?

  Hello

  1. what happens when you try to connect to the internet?

  2. what operating system is installed on your computer?

  Method 1:

  Follow the link and use the Troubleshooter: in the Windows wireless network connection problems http://windows.microsoft.com/en-US/windows/help/wireless-network-connection-problems-in-windows

  Method 2:

  Follow the steps in this article and check if that helps: "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer http://support.microsoft.com/kb/956196

• Linksys wireless-G 2.4 GHz DELL Studio XPS laptop. Can do not seem to connect wirelessly.

  Linksys wireless-G 2.4 GHz DELL Studio XPS laptop can do not seem to connect.  has worked before.  Works with a lead wire.  Clues to operate wireless?

  Thank you.

  Hi R4M4,

  1. did you of recent changes on the computer?

  2. what happens when you try to connect wirelessly?

  3. What is the model number of the Linksys router?

  Check and make sure that all the wireless connection settings is correct on the computer.

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions