WAG54GX2 ping timeout Server NAS Synology DS215j

Similar Questions

• After that stright connected to iSCSI (initiator) Host cannot ping the server iSCSI (target), but the target can, why?

  After that host on vSHere 4.0 strightly connected to iSCSI (initiator) host cannot ping the server iSCSI (target), but target can.  And iSCSI works well. I mean I can create and use the iSCSI disk, why? It makes me confused.

  Thank you!

  Geoarge,

  iSCSI traffic uses a VMkernel port, instead of using the command 'ping', use 'vmkping '.

  André

• Unable to connect server to Synology OpenDirectory

  Using 10.10.x server and client 10.11.x, can't connect Apple machines to a Synology OpenDirectory of services. The directory utility says simply "the server has not responded.

  However, using ApacheDirectoryStudio or the ldapsearch command, I can properly connect and search the database of openDirectory syno.  (for example: ldapsearch h ldap.mydomain.blah d uid = root, cn = users, dc = ldap, dc = mydomain, dc = mypassword works fine blah - w.)

  So, basically, I can connect and search, but the INTERFACE seems to do things differently. And I followed the proper procedures found in the documentation of Syno.

  Any idea?

  In my view, this error is related to SSL, more precisely the way as OD accesses the.app store certificate. The cli version still works for some reason any. If you try to make an unencrypted link, it should work. If this isn't an ideal solution (to the very temporary), it should still help you debug

• Main server cannot ping the server 2 to another location, but the 2nd Server can ping the backend

  I have 3 servers: server and 2 servers to files in another country.

  My main server can only ping the 2nd file server.

  But both of our servers in 2 files from another country can ping on the principal server.

  In short, I can not away to the first file server.

  The settings on both servers of files are the same. And I don't have access to the 2nd file server issues using the main server.

  If someone has the patience to help me understand the question?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Server NAS gives error 0 x 80070035

  If I want to connect to my SIN of Synologic Server I get the following error

  Foutcode: 0 x 80070035

  Someone at - it a solution?

  Hello

  This link can help:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/thread/028a3d13-f571-49E0-abe7-1ca61fb92082/

  Follow the steps and check out them.

• Ping the Server workflow

  Y at - it method, or another function ping to a server, or a list of servers, from a workflow?

  Yes, the System.isHostReachable () works on VCO

  EXAMPLE: System.isHostReachable (fakeservername, 5000);

  I have created a ping of cushions inflatable "ghetto", as sometimes the above return a false negative ('hostname' is my entry for servername or IP & 'result' being my Boolean result).

  result = System.isHostReachable (hostname, 5000);

  If (result == false) {}

  try {}

  System.log ("PING STARTED SECONDARY");

  var cmd = new String();

  cmd = "ping-n 1 ' + host name;

  var order = new Command (cmd);

  Command.Execute (true);

  var pingResultNumber = command.result;

  var curlResult = command.output;

  System.log (curlResult);

  If (curlResult.trim () .toLowerCase () .indexOf ("ms ttl") >-1) {}

  System.log ("host" + hostname + "responds to the pings.");

  result = true;

  } else {}

  System.log ("host" + name + "NOT responding to pings.");

  result = false;

  }

  } catch (e) {}

  throwing "Unable to run the command" + e;

  }

  }

  on the other

  {

  System.log ("host" + hostname + "responds to the pings.");

  result = true;

  }

• I can't ping the server to the client in the network of the vm.

  Hi, I'm new so be nice

  I have an advantage of being able to put up with VMworkstation, I have 3 Server 2003 (a file, dns and dhcp server) and Server 2008 (with, I want to be PDC w / AD), I also have 1 XP and win7 1. servers can ping each other, but I can't ping clients? I have disabled the firewall on XP and win7. Before you start to get the installed roles I wanted to ping to make sure that all they communicate. I used an IP 10.10.10.11 for 2003 (10.10.10.9 for dns) ect. I was wondering why I can't ping clients. read the other post, they declare firewall. I don't know that I have disabled the. Note: this is not on a network or on the internet at the moment.

  Grrrr, ok I restarted the host and now all of the mpcv displays an X on network connections, help please thank you.

  Take a look at the example I posted to Re: need help with Dev virtual network environment that requires a domain controller.

  André

  PS: in the example, NAT is default vmnet8.

• Timeout server serving socket policy file

  I have a Flex application that uses a XMLSocket to talk to a server socket on the local machine (localhost).
  
  For various reasons, I can not configure a server socket on port 843 (because the server socket is embedded in a desktop application, and not all users have access to the root that is required to listen on this port). BTW, if I * use this server on port 843, everything works fine. But like I said it is not an option for the deployment.
  
  My java socket server is a little slow, because for each new request, it starts a new thread. The result is:
  
  WARNING: Timeout on xmlsocket://127.0.0.1:4444 (for 3 seconds) while you wait for the socket policy file. This should be no problem, but see http://www.adobe.com/go/strict_policy_files for an explanation.
  Error: Resource request to the xmlsocket://127.0.0.1:4444 by the http://localhost:8080/play/play.swf applicant refused due to lack of policy file permissions.
  
  However... If instead of my server java, I have replace the server python, available here:
  http://www.Adobe.com/devnet/flashplayer/articles/socket_policy_files.html
  
  .. .and I executed him * NOT * on port 843, but on my server socket port works on (port 4444), everything works fine.
  If I introduce a delay in the python server, having to wait 5 seconds before serving the policy file, I get the above error.
  
  So, I can say with certainty that the time-out is the problem. Is it possible to make the flashplayer to wait a little more than 3 seconds to receive the policy file? I can try and speed up my socket server code, but there is no guarantee it will always run pretty fast on each machine.
  
  I hope someone can help. This is an instance where Adobe socket security policies are so restrictive that I have in fact can't use a power outlet at all. ;-(
  

  I got it works... I still don't know exactly what the deal was. Something in my political server implementation differs enough implementation of python that the flash player grabbing behind the scenes of the policy file did not work. I think that it is considered a bug in flash player, but I don't have time to gather all the details now.

  What I did to make it work was:
  (1) used the implementation of the policy server from here:
  http://www.broculos.NET/tutorials/how_to_make_a_multi_client_flash_java_server/20080320/en
  (2) modified to have the server strategy running on port 6667.
  (3) slightly modified the policy file that is sent by this server, add this line above the line 'allow-access-from:
  + ""
  (4) changed my flex for this code before you try to connect to the socket:
  Security.loadPolicyFile ("xmlsocket://127.0.0.1:6667"); ")

  Hope this helps someone...

• First Ping timeout

  Hello

  I know there has been some discussion on this but rather than add my question at the bottom of one of these I thought I'd try again.

  We have a 857W connected to the internet via ADSL. Everything works fine, but if I ping from a connected PC the premiera always times out. If I ping the router ( www.google.com ping 192.168.18.1 source) I get! every time. Back to the PC and 'Request timed' out on the first.

  The only way I could solve this problem is to use no ip cef. Then it works as planned, the first ping and everything. The problem is after a lot of reading, it's not ideal to disable the cef.

  I would be very grateful for any suggestion.

  Thank you

  Chris

  Chris,

  This is a bug, as shown in the following link

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCti13229

  Affects 12.4 T (14)

  Has been corrected in 12.4 T (15) but published in March 11

  Try downgrading to T13 as the bug doesnot affect the version T13

  Please let me know the answer helped the rate.

  Thank you

  Karthic.R.

• two virtual machines on esxi, vm linux server can ping and ping to the outside, windows can ping but incoming requests timeout

  Hello

  I have an ESXI server with two network cards, each connected to separate the subnet in the same Cisco switch.

  First interface is in 10.231.5.0/255.255.255.0 and the second is 192.168.118.0/255.255.255.0

  Initially, I built a virtual machine with MS Windows 2003 R2 Standard with two network interfaces with static IP addresses on both subnets. 10.231.5.153(Gateway configuré sur cette carte réseau) and 192.168.118.153.  It has also installed vm tools.

  Second built vm is Ubuntu 8.10 with two network interfaces and two static IP a linux server in each subnet. This virtual machine has never had no problem contacted subnets one bit and he can go out on all of the subnets that are routable through the switch. Static IP addresses are 10.231.5.152(gateway est configuré sur cette carte réseau) and 192.168.118.152

  The Windows virtual machine has always been a bit flaky. Sometimes he would not be able to ping on all interfaces (while the State of the network in Windows showed the incoming and outgoing packets).  Sometimes he could ping another Vm and ESXI management IP but could not ping to the outside on the network 10.231.5.0 or 192.168.118.0. Deactivation and activation of network interfaces seem to make a difference with outgoing network access is enabled. However, if I try to ping back part of the same subnet a machine outside the ESXI Server ping timeout. It's weird as after having activated a deactivation of the network interface, that he even manages to ping subnets a bit far, but pingees machines cannot he ping back. However, these machines have no problem ping to the management of ESXI or Linux VM interface. Restart the machine virtual Windows translates the EPS of no longer being able to ping up to deactivation and activation of cards network again.

  I tried to activate the Promiscuous (the Accept value) mode on computer management virtual and vSwitch (vmnic1 and vmnic0 appear in the collection of NETWORK adapters window), but it did make a difference.

  Pointers would be very much appreciated.

  Thank you

  Windows Firewall is enabled?

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• Installation of iTunes, Synology NAS,

  I can get a good guide on how to use my 716 + NAS synology, to store all my music files, and when I open itunes on my iMac, MacBook air, or windows laptop or even when I use AppleTV, I can access this music (if it is not stored locally on my computer)?

  Also, I tried this in the past, but with itunes on my iMac to restart, it would never ride my share, so he always missed the location default library itunes (locally) and mess substance upward.

  I see also synology has an Itunes Server package, that would be a solution?

  Thank you

  First, be aware that there are no rare posts here on NAS problems with iTunes.  NAS is great conceptually, but in execution of problems that can occur with iTunes and have done so for more than a decade.  Everyone makes fingers to everyone, but the main thing is that you always run a risk of a library mutilated.  Better is to use a simple external drive and use the NAS for backup.

  I think the server package is pretending to be a shared library iTunes without having an active version of iTunes open at the time.  Have you read the manual or online for the NAS documentation? I don't have one and what I know is people post questions here.

  The reason why you had problems before is your SIN is going to sleep and not wake up before launching iTunes.  The same thing would happen even if you use a simple external hard drive.  If it doesn't happen at startup, you can try to put an alias to the iTunes on the server application, then an alias to this alias in your computer and start iTunes this way, not directly from the computer.

• Backup on a Synology NAS photos

  I have a NAS Sonologie DS115j. Is there an easy way to back up photos on the NAS? "Show Package Contents" on the photo library file is an option, but that seems to be a ridiculous way to copy a file to a different location.  By selecting an exporter of files to a separate location also seems harder than it needs to be.  Has anyone came up with an easy solution, instead of copying the entire photo library?

  I'm on OSX 10.10.5
  and NAS Synology DSM 5.2

  Do not back up a library of Photos to a NAS server.  The format of the server does not support the complex structure of the library with its database relational complex, the links between files and the required access permissions.  It is not supported as a viable backup for Photos or iPhoto library support.

  The backup drive must be formatted as shown in this screenshot and be directly connected either USB, FW, or stroke, for the Mac.

  

  

• Can not ping so allow the engine to Base on Windows Server R2 filtering 2012

  Hello

  My windows platform is Windows Server R2 2012.

  My problem is that I can't ping the server during execution of the server BFE.

  I had already opened the ICMPv4 and v6 in the inbound rules. I also had to open inbound TCP 3389 port.

  I have once again allow all traffic entering the firewall rules.

  I tried to ping; error - request time-out

  I tried Telnet; No output.

  Can I know how to activate the ping while the BFE is running?

  Thank you

  Kind regards

  Aghiles

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Cannot ping server to use a server-based application

  I have a computer of workers, if I go to my network places, I can access the server.  If I ping the server by IP address, it pings fine.  However if I ping by host name, it pings somewhere else.  Here is a direct link with the ping command.

  http://i301.Photobucket.com/albums/nn78/Peeps38/nkellysping.jpg

  I uninstalled and reinstalled the application that resides on the server in question, and I can also access all the files that are shared from the server.  Unable to ping the server, this is what prevents the application from running correctly.   I checked and rechecked all potential firewall which may run (norton and windows are the only two i found and both have been disabled)

  My first thought was to force recognition of the ip address in the host file.  the host file looks like this:

  # Copyright (c) 1993-1999 Microsoft Corp.
  #
  # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
  #
  # This file contains the mappings of IP addresses to host names. Each
  # entry should be kept on an individual line. The IP address must
  # be placed in the first column, followed by the corresponding host name.
  # The IP address and the host name should be separated by at least one
  space #.
  #
  # In addition, comments (such as these) may be inserted on individual
  # lines or following the name of the machine indicated by a symbol "#".
  #
  # For example:
  #
  # 102.54.94.97 rhino.acme.com # source server
  # 38.25.63.10 x.acme.com # x client host

  127.0.0.1 localhost
  10.1.10.11 Televantage
  10.1.10.10 eserver

  the 10.1.10.11 is the server problem and it does not resolve when the name ping.

  I am at a total loss, because there are two other computers not 6 feet from the problem pc and they work perfectly well.

  any thoughts or ideas would be greatly appreciated

  Thank you

  Jerry

  This smells like a DNS suffix search list situation.  Whenever a TCP/IP non - Fully Qualified Domain Name (FQDN) non - is registered (i.e. a name without a dot (.) in it) the DNS will seize the suffixes in a list and try them all out first.  This list can be found through a command window and typing the command:
  ipconfig/all
  and you will see marked lines "DNS suffix search list.  It appears as "epeopleamerica.com" is one of the entries in this list.

  Alternatively, if you go into the control panel network and made a right click your network connection and select 'Properties' and then double-click "TCP/IP" entry in the Middle window (maybe to scroll down) then click on "Advanced", then click the "DNS" tab there will be two checkboxes labeled "Append primary and connection suffixes DNS specific to the ' and 'add these DNS suffixes '.  To avoid this, click on the 'Add these DNS suffixes' box and remove all of the entries in the box below.

  Yet another approach would be to make your domain name FULL-not qualified by putting an end to a period.  So instead of:
  Ping Televantage
  Try:
  Ping Televantage.
  Then he would not add suffixes to the name when the name resolution.

  See you in 'My Network Places' because he is using NetBT broadcasts (Microsoft Networking) which is a different protocol of the TCP/IP line that uses "ping". (Different rules are in place to resolve the names of these two protocols).

  HTH,
  JW

• Cannot read files from DVD to NAS on PC server

  I installed where there is a central NAS server that contains all of my DVD more (in .iso format but also in the form of vob files) and connected to the Server NAS are two media players HD connected to the TV and two PC on the same network (workgroup).

  I can access and download files on the server very well, but I am unable to play DVDs on the PC. There is no problem on the HD media players. It seems that the PC wants to download full movie before playing.

  How can I convince the PC to play files in streaming mode?

  Would appreciate any help.

  Correct, WMP can stream files on the network or on the internet. Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.