Want 4502: HP Envy 4502 is stuck on 'now print alignment page.

Similar Questions

• OfficeJet 4615: Officejet 4615 stuck on "Print alignment Page" during the initial installation

  sharpen the printer begins to print page alagin and stuck

  the printer, printing from the computer

  I update the firmware and I do hardreset

  Hello @menybiton ,

  Welcome to the forums of HP.

  I understand that your printer is stuck on the print alignment page.

  I want to help you.

  I would like to remove the ink cartridges.

  Then another hard reset of preforms.

  When the printer asks the missing cartridges, reinstall them.

• 4632 HP Officejet printer: hp officejet 4632 printer stuck printing alignment page

  Help please.  My printer is stuck trying to print an alignment page.  I can't scan or copy anything to the printer.  I tried unplugging the printer with power, has waited more than a minute, reconnected and it did not help.

  I tried the scan doctor and she also did not help - Alternatively found printer was 'busy', or scan doctor tried to print an alignment first page and is stuck there. If I "jump" impression of the alighment with doctor to scan page, it prints a test page, it finds everything works "ok." "" "." Print alignment page"bypasses to jump the"print alignment page"printing, and yet the screen of the printer still says 'now printing alignment page', is stuck and I can't always copy or scan anything from the printer.

  I would greatly appreciate any suggestions I tried to solve this problem for several weeks.  Thank you.

  I think I've just fixed this problem after 3 weeks.  I actually tried the doctor print because it seemed to be a printing problem.  I just tried the scan doctor, he finds problems, led me through steps and printing and scanning seem to work now.  Phew!  That took much too long to fix, but glad it works again.

• Want to HP 4500 stuck now to print alignment page that prints nothing

  Want to HP 4500 stuck now to print alignment page that prints nothing

  I was able to talk to the customer service and they said it was a failure of printer and replacing the 4500

• My HP Envey 5530 is stuck on "scanning alignment page.

  My hp Envy 5530 is stuck on "scanning alignment page" and did not finish the alignment.

  Hello frustrated1963,

  Welcome to the HP Forums!

  I understand your desire to 5530 is stuck on now 'scanning alignment Page. I will do my best to help you! Please, try the following steps:

  (1) Please plug this printer into a live wall, not a surge protector

  (2) take away all your ink cartridges

  (3) disconnect the power cable from the back of the printer (do not press the power button)

  (4) wait 60 seconds or more

  (5) plug the power cord into the printer. Wait for the printer turn on completely

  (6) now install the ink cartridges. Try to print an alignment page

  Please let me know if this page receives missing colors. Impatience on your part.

• LaserJet Pro M127fn MFP: Stuck "print fax page 1.

  I had to receive two pages of fax. After that the first page has come through it is stuck "print fax page 1. The second page is never good. I can't print anything. I already disconnected my printer and plugged in. When the rear connection, it uses the same throughout first fax page and gets stuck again. Happen from nowhere at least once a week for the past few weeks.

  Hi @cvsc ,

  I see that you are having problems with the printer stuck in an "Print fax page 1" error message when you restart the printer, it keeps printing the same fax. I would really like to be able to help solve this problem.

  I would like to do a hard reset to see if that will solve the problem. It's probably a little different then what you have already tried.

  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  I would say for updating the firmware of the printer. Here is the link just choose your operating system and select the firmware download. HP LaserJet Pro MFP M127/M128 series Firmware update.

  If you're still having problems, try to reset the printer. I'll send you another step to try in a private message to try.
  In the forum next to your handle name simply click on the envelope to see.

  If you need help, let me know.

  Good day!
  Thank you.

• HP envy 4502: point stuck in the queue does not print anything, tried to delete and always blocked

  tried to remove the item to print several times, still stuck, unable to print anything now

  HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning.

  Download and run printing HP and doctor Scan quickly and automatically perform several tasks of troubleshooting.

  When you click this link, HP Print and Scan Doctor is downloaded using the download of your Internet browser capabilities.

• Fake print error message want 4502

  I Wibdows 8.1 with a new installoed want 4502 all-in-in-one. It will print perfectly, then the operating system sends an error message that the casting of the page is not printed. I say I'm getting low on black ink supply, but it seems to have been a lot.  The text of the message is about "error in printing on printer Envy 4500 - could not print (document source, Windows, Outlook, etc.). It appears after the document is printed perfectly. Any ideas?

  Been there, done that; without success. The message is caused by a low level of black ink. I changed the cartrage and the messqage went. Thank you once again for a flaky OS Microsoft and I thank you for your help.

• 4502 printer does not print full page

  My printer 4502 feeds double intermittently leaving the lower third of the blank page. It occurs when you try to print multiple pages.

  At the beginning when you try this link it failed, but I tried again and installed the software successfully. We'll see how it goes. I thank you very much for your help and concern. You're an asset to HP. I hope they appreciate you!

• 7645 envy: Envy 7645: some local Windows programs print, but some do not; all requests for remote printing works

  I replaced a HP Deskjet 5150 with a HP Envy 7645.  Connection via USB.

  I've seen all the entries of forums about the problems/bugs to get printing to work.  I tried all the...  HP Print doctor (no errors reported), several re - installs, etc.  all HP printing test pages.

  at this point, some programs the:

  1. print - IE 11, Adobe Reader, MS Live Mail 2012
  2. do not print without message - 35 FF, Quicken 2014, MS Word 2010
  3. do not print with message - MS Excel 2010, IBM Notes 9

  all the programs print correctly on this printer from another PC on the home network... which seems to point to some sort of shift/software conflict on my machine.

  Thank you

  Hello @deerPrint,

  Welcome to the Forums of HP Support!

  I understand that since the installation of your HP ENVY 7645 e-all-in-one printer on your Windows 7 computer that you have not been able to print successfully from several programs. I want to thank you for all the details about your troubleshooting and conclusions, including in your original post. Right now, I would like to send you an additional troubleshooting.

  I understand that you have already tried several uninstalls and reinstalls nothing doesn't. At this point, I'm going to have you repeat uninstall it and reinstall the process, but there are a few additional steps that will be included. Please follow all the steps in the order below.

  Please disconnect USB cable before continuing.

  Step 1: Uninstall the drivers:

  1. Click on the Start menu
  2. Select all programs
  3. Select the HP folder
  4. Select your HP Envy
  5. Select Uninstall

  Please follow the instructions on the screen to complete the uninstallation. Once the uninstall is complete, proceed to the next step.

  Step 2: Hold temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start after you click on it, type %temp% , and then press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  5. Close the Temp folder when it is empty
  6. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 3: Run CCLeaner:

  It is possible that a malicious file or registry corruption is at the origin of the conflict of impression on this one computer. To make sure that your computer is in perfect working condition, I'll have you run a CCLeaner. Please click here to download the CCleaner tool. Once the site opens click the Free Download button at the top. Once the download is complete, please let the tool Run. Run the Scan to check out your system.

  Once completed the CCLeaner, please proceed to the next step.

  Step 4: Reinstall the driver:

  1. Please click here to download the complete driver of features for your HP Envy
  2. Once the site opens click on the download button at the top left
  3. If you are prompted, allow the download of the run
  4. Once the download is complete, please follow the steps on the screen to install your machine
  5. Do not connect the USB cable until the installation program invites you to

  Once the installation is complete, test printing from several programs again to see if the problem has been resolved. If the problem persists, that another driver will have to be tested. To load the driver replacing, please follow the steps below.

  Step 5: Load driver replacing:

  1. Click on the Start menu
  2. Select the devices and printers
  3. In the devices and printers folder right click on your DESIRE 7645 and left click on printer properties
  4. Left click on the Advanced tab
  5. Left-click on new driver
  6. When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
  7. Select HP as the manufacturer on the left
  8. DeskJet 9800 select the printer on the right. If Deskjet 9800 does appear to only select "Windows Update" at the bottom left and once the update is completed, you will be able to select Deskjet 9800.
  9. After selecting Deskjet 9800 hit Next to complete the wizard driver new
  10. Under the printer properties window, select 'Apply' but do not hit OK
  11. Select the general tab
  12. Rename your printer in HP ENVY 7645
  13. Click OK
  14. Finally, right click on your DESIRE 7645 one more time and left click on Printing Preferences
  15. Left click on the paper/quality tab
  16. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its normal fast
  17. Press apply and OK

  Now that the other pilot is added in, please try again to print.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• HP Envy 5660: cannot send mail on printer Envy 5660

  A new HP Envy 5660.  Almost too fancy for me and little info screen requires the steady hand and a stylus.  I tried to send an email and when I finally got my email address to she wanted a PIN and I do not remember if I never took one and if I did I forgot.  Don't know how to get information or change the pin code.  If I could do it on the computer maybe I could read.  My question is how can I get a PIN, if I can use my email?

  Hello @rmill777,

  Thank you for joining the Forums of HP Support!

  I understand that you are having problems with the Email scanning function on your new HP ENVY 5660 e-all-in-one printer as you are be prompted to enter a PIN that you do not. I want to help you with this issue today.

  How to set up scan to Email in profile:

  To use the E-mail scanning feature, you must first define a mail profile.

  1. on the printer control panel, press the Scan icon (), and then tap send.

  2. on the Welcome screen, press continue.

  3 touch inside the Email: area, enter your e-mail address and then press done.

  4. press to continue.

  5. a PIN is sent to the e-mail address entered. Touch continue.

  6. tap PIN, enter the PIN code , you have received in your email and then tap fact.

  7. press on the Email to store or Automatic connection, depending on how you want the printer to store your login information.

  8. Select your type of scan by touching the Photo or Document.

  9. check the e-mail information and press continue

  10 touch Scan to Email.

  11. press OK when the scan is finished, and then tap Yes to send another email, or No. to finish.

  Once the scan to E-mail has been implemented, you can change your e-mail account settings scanning if you wish:

  1. on the printer control panel, press the Scan icon (), and then tap email

  2. on the display panel, tap the account you want to editand then tap Edit.

  3. Select among the following settings that you want to change, and then follow the prompts on the screen.

  • Auto-login

• "How to stop this message"do you want to install the plugin required to view media on this page.

  How to stop this message "do you want to install the plugin required to view media on this page.

  I don't need the plugin to play the video ok

  If it comes from the Flash plugin you can switch pref plugins.notifyMissingFlash false on the topic: config page.

  You can open the topic: config page via the bar of address and you can accept the warning and click "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• with these changes, I can only print a page of print preview ability has been removed I use it all the time when you want to print something on a Web site

  When I was on a website and I tried to print a page, it allows to be a tab that says "FIREFOX" in the upper left corner of my screen, I could click on that tab and I had several options, one was "print" and "print preview". All the time, I use the Preview button before printing to see how the page would look like when I was feeling and how many pages there are. I could then choose to print all or part of an article and adjust it to what I wanted to print. I don't have this tab in the upper right corner. A tab for "open menu" is now in the upper right corner, however, in this menu is only a button 'print '. There is no option for "print preview" and so I can't address that I want to print. I could also adjust margins, etc. of a tab from the view, I can not find too. I really hope there are always options and how I find, where are they located?

  Print this button in Firefox 29 opens in print preview mode first.

• my hp photosmart d110 is stuck trying to print the alignment page

  I use mostly my HP Photosmart D110 as a copier.  Yesterday, after changing the ink cartridges, it went to the screen that says it prints the alignment page.  It does not print.  I have it put off, sometimes by the button, sometimes by pulling on the power cord, but it turns on and says he has to print an alignment page.  He's stuck in this loop now, and I can't use it al all.  Help!

  Hi guidoguido,.
  
  Follow the steps below.
  
  1. remove the cartridges from the printer
  2. If the printer is on, disconnect the power from the back of the unit.
  3. wait for 1 to 2 minutes and make sure that the power is plugged directly into the wall before connecting the printer in.
  4. If the printer does not by itself, press the power button, and then wait for the printer to you ask to install the cartridges.
  5. try to re-run the alignment on the printer
  
  Let me know what you find?

• HP Envy 5530 e-all-in-one: envy 5530 E cannot detect alignment page

  I'll put up a new e-all-in-one printer HP Envy 5530. I went through the installation OK, until I got to the part about the alignment of the print cartridges.  It prints the alignment page, it will copy even, so I know the scanner works. I printed several pages and they all look great.  But when I use the ink cartridge alignment tool it does not detect the alignment page in the scanner.

  Yes, it is face down on the scanner

  Yes, the cartridges are installed OK

  Yes, printing seems good

  Yes, the scanner can scan and print pages, even the alignment page

  What else to try?

  Thank you

  Well, too bad. I unplugged, moved the card to a regular wall outlet instead of a power strip, and it is turned on, ask to do a print alignment.

  I did, it printed the page, I put the page on the scanner and it completed the alignment.

  I don't know what the problem was earlier, but it worked this time.