want to 4-1102es: error of devices on windows 10 - hp envy 4-1102es

Similar Questions

• Error installation software device driver for removable devices in Windows Vista x 64

  I have Windows Vista x 64 installed on my PC and nVidia Forceware motherboard and graphic cards.

  When I plug in any removable drive into my USB 2.0 port, Windows starts the installation of the device driver software and then sees it as an unknown device. The dialog where he asks me if I want to 'locate and install driver software', 'Ask Me later' or 'don't show this message for this device.

  I select the recommended option: "locate and install driver software.

  I click 'Continue' when Windows asks me permission to continue.

  Then, when the execution of the installer of the software in the bottom right of my screen, the installation of driver software for device, it shows "unidentified device failed.

  Then another window pops up saying this:

  "Found New Hardware - device unknown".

  Windows encountered a problem installing the software driver for your device

  Windows found driver software for your device but encountered an error trying to install it.

  Kodak

  An error occurred during the installation of the device:

  The driver for this device is missing a necessary entry. Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor.

  If you know the manufacturer of your device, you can visit their website and check the support section for driver software. »

  That's what he does when I'm trying to connect my Kodak Easyshare M550 digital camera. I would go ahead and contact Kodak, but the problem seems to extend to ANY removable device on my computer.

  For example, I have a Lexar Flashdrive. When I plug it into my USB 2.0 port, it Windows says the following:

  "Windows needs to install driver software for your USB Flash Drive", etc...

  'Install the device driver software', 'USB Flash Drive search Windows Update'...

  Then a window opens asking me to "insert the disk that came with your USB key. Problem is that no driver disk not supplied with the hardware that Windows Vista is supposed to come with the drivers. I know this because the camera and usb flash drive worked very well until I reinstalled Windows Vista on my new hard drive (new installation, because my old hard drive crashed) and I've NEVER had to install device drivers for Windows to recognize it as a removable drive and operate automatically.

  Also, I installed Daemon Tools Lite and I had to manually "Update" the device driver to point to the "Windows\INF" folder in my hard drive, after copying the cdrom files needed for the specific subfolders for windows to let the program assign a drive letter for the drive virtual it creates.

  I think that perhaps not all device drivers have been installed when I installed Windows Vista, this time. If that's the problem, I don't know how that could happen, nor how to fix it, but I really prefer to find a way to solve this problem without reinstalling Windows Vista again. I don't mind not manually install the drivers as long as someone can show me what files to copy and where to find them on the Windows Vista disk that I bought at Microsoft. I KNOW that Windows HAS come with these drivers.

  If anyone knows how I can fix this, please tell me, because it's ridiculous to not be able to use any removable device readers (except for the use of all Flash drives). Thanks in advance.

  I know it can be frustrating to solve problems.

  (A) was this post or hibernation sleep?

  Microsofts troubleshooting KB

  http://support.Microsoft.com/kb/928631

  (B) the bios settings

  First of all you do not state if you tried to see if there was a setting in bios disabled USB ports during the startup. Or how the bios was set to install devices automatically. If you check your manual site or the motherboard manufacturer

  It will tell you which key to press. And where your USB ports are on or off. Some systems do not have to turn on or off.

  Plug n play OS on conscious

  could help Vista automatically recognize your USB

  (C) what version where do you use? SP1? or gold?

  (D) USB hubs may cause problems just be hubs. Power connected?

  (E) and of course if it is a case check connection in the right port. Return panel slide? plugged into port back?

  Hope something here helps

  Keith

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• You receive the error software device driver has not been installed successfully using the USB LAN cable

  Original title: Please help!

  I bought a USB - LAN cable, but when I try to use it, this thing came out, "device driver software was not properly installed", then what should I do to use this cable properly? l

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. If I understand correctly, you receive error software device driver has not been installed successfully using the USB LAN cable. I suggest you follow the troubleshooting steps to check if this may help.

  1. don't you make changes on the computer before the show?
  2 are you able to get any USB devices to work in USB ports?

  Check the status of the device and the driver Version:

  a. open byclicking the button start Device Manager, click on Control Panel, clicking system and Maintenance, and thenclicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. double-click the category containing your device driver and thendouble - click the device name.

  c. check the status of the device tab click on driver tab arencontre, checkDriver provide, Date of the driver, the driver Version, digital signer. Please provide this information.

  d. click OK, exit Device Manager.

  Method 1:
  You can update the drivers on the manufacturer's Web site and check.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Use Windows Update to find a device driver
  Note to use Windows Update, you must be connected to the computer as an administrator:
  Follow these steps to use Windows Update to find a device driver: a.Click Start, click all programs and then click Windows Update.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  b check the updates.
  AA,a,AB,b,c.to determine if there are updated drivers, click on view available updates.
  If updates are available, click the driver you want to install, and then click on install.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  If you need further assistance, please answer and we will be happy to help you.

• I'm trying to send some files to an external drive but error message: device i/o error.

  I have an external drive that is used only for embroidery designs. I am trying to send a few folders on the drive but get the I/O device error message. What should I do to fix the error?

  Original title: error message: device i/o error.

  It may be a cable, a system problem or failure of the HD.  You have saved the data?

  You can test the drive by running chkdsk /f as indicated below

  A CHKDSK F: /R

  CHKDSK WARNING: while running chkdsk on the drive if bad sectors are found when chkdsk attempts to repair this sector all the data available in this area may be lost.

  Run CHKDSK/r/f of a high (run as administrator) command prompt.

  Do this for each hard drive on your system.

  When he tells you, he cannot do at the moment – and ask you if you do not want to do it at the next reset - answer Y (for Yes) and press ENTER.

  Then restart and let the test to run.

  It may take some time for him to run, but keep an occasional eye on it to see if it generates errors.

  http://www.howtogeek.com/HOWTO/Windows-Vista/Guide-to-using-check-disk-in-Windows-Vista/

  See "CHKDSK LogFile' below to verify the test results.

  B Elevated Command Prompt:

  Click on start and type "cmd.exe" (without the quotes)

  At the top of the search box, right-click on Cmd.exe and select "Run as Administrator"

  C CHKDSK LogFile:

  Click Start and type "eventvwr.msc" (without the quotes) and press enter

  Expand the topic the Windows logs, and then select the Application log file entry.

  Double-click the Source column heading.

  Scroll down the list until you find the entrance to Chkdsk (wininit for Win7) (winlogon for XP).

  Copy / paste the results in your next post.

• Get: error in device: device not authentic when you launch the app VirtualBench

  When I start the application virtual bench (10 x 64 Windows) I say device error dialog: "device error: device is not authentic" and am no longer able to connect to the device. At one point, I was able to connect to the device via the USB port and also via wifi. I have rebooted the machine, pedaled power, uninstalled the drivers, reinstalled the software virtual bench with no luck. Any advice?

  After an attempt:

  -Reset the device via the button on the back of the device of virtual bench

  -remove the installed drivers

  -resettlement of bench virtual application

  -another machine

  -connection via the access point

  -USB connection

  -try a different USB port

  Still not had luck. Until finally, I decided to unplug the power on the virtual bench cable and plug it back. Looks like it's a pure reset of some sort. Now, I can connect successfully to the device

• IDT high definition audio CODEC. Error: the device cannot start (code 10)

  Original title: IDT high definition audio CODEC

  My Dell Latitude D620 has no sound control or (other than the system beep) volume, the volume control buttons do not work. When I uninstall and reinstall the IDT, I get an error message - "device cannot start (code 10).» Help!

  Hello

  1. have you done any change in software on the computer lately?
  2. What is the brand and the model number of the sound card?

  Method 1.
  Follow the procedure step by step in the article below and check.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2.
  If the problem persists, follow the steps listed in the article below and check.
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918
  Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.
  I hope this helps.

  See also: related errors Description 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• WALKMAN NWZ-S545 gives error cannot start (error 10) device in the Device Manager (and not driver for this device found)

  Under Xp (sp3), Device Manager gives me an error for a Walkman NWZ-S545.  XP sees it as a MTP device, but it does not start.  The Device Manager will give me 2 error messages: device will not start (code 10) not and no driver not found for this device.  The walkman works very well with my other machines on the LAN XP but naturally one that I run my media (a all my MP3 etc.) is the one that has the error.  All of my PC are almost identical (with the exception of the server, duh).  I changed USB ports, uninstalled/reinstalled drivers, called SONY to dozens of times, nothing works.  Is a service not started that must be, a driver damaged, what?  Thanks for your help in advance.

  Hello

  I suggest you run the fix that is present in the link below then connect the Walkman on the system and see if the problem is resolved.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  I suggest to uninstall the drivers and firmware for the walkman of the system then download it from the Sony site and install it on the system and check if the problem is resolved.

  http://eSupport.Sony.com/us/Perl/SWU-list.pl?MDL=NWZS545&SelectOS=7#div_pos_94

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Uninstalled McAfee Security, but I continue to the popup error report 'McAfee Security Center had to close"asking if I want to send an error report.

  Original title: error reports

  I uninstalled McAfee Security, but now I get the popup error report 'McAfee Security Center had to close"asking if I want to send an error report. When I click on 'do not send', another error report immediately appears. No idea how can I stop this? At the present time, I have 9 popups error report in my taskbar.

  Ed

  Hello

  This problem can be caused if McAfee Security is not completely uninstalled.

  1. Why did you uninstall McAfee Security?

  2 have you tried sending the error report?

  3. What are the content of the popup of 9 error report?

  I suggest you to uninstall McAfee completely the link security.

  How to uninstall or reinstall supported McAfee products using the tool of Consumer Products Removal (Development):

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  If the problem persists, then I suggest you to contact McAfee support:

  http://www.McAfee.com/us/support.aspx

  If you need further assistance on this topic, let know us and we will be happy to help you.

• Cannot access a HID device get code 5 error please let me know how to access a HID device, I need an example of code to access a HID device in windows 7.Thanks.R.M. Kiran

  /*******************************************************
  Simplification of Windows HID

  Alan Ott
  Software signal 11

  22/08/2009

  Copyright 2009, all rights reserved.
   
  The contents of this file can be used by anyone
  for any other reason without conditions and can be
  used as a starting point for your own applications
  that appeal to HIDAPI.
  ********************************************************/

  #include
  #include
  #include
  #include
  #include "hidapi.h".

  The headers needed to sleep.
  #ifdef _WIN32
  #include
  #else
  #include
  #endif

  int main (int argc, char * argv)
  {
  int RES;
  unsigned char buf [256];
  #define MAX_STR 255
  WSTR wchar_t [MAX_STR];
  hid_device * handle;
  int i;

  WIN32 #ifdef
  UNREFERENCED_PARAMETER (ARGC);
  UNREFERENCED_PARAMETER (argv);
  #endif

  struct hid_device_info * devs, * cur_dev;
     
  devs = hid_enumerate (0x0, 0x0);
  printf ("id=%d\tsproduct id = %d\n",devs-> vendor_id provider, devs-> product_id ");
  cur_dev = devs;
  so that {(cur_dev)
  printf ("detecte\n device type: % 04hx %04hx\n path: %s\n Serial_number: %ls", cur_dev-> vendor_id, cur_dev-> cur_dev-> path, product_id, cur_dev-> Serial_number);
  printf ("\n");
  printf ("manufacturer: %ls\n", cur_dev-> manufacturer_string ");
  printf ("product: %ls\n", cur_dev-> product_string ");
  printf ("output: %hx\n", cur_dev-> release_number ");
  printf ("Interface: %d\n", cur_dev-> interface_number);
  printf ("\n");
  cur_dev = cur_dev-> next;
  }
  hid_free_enumeration (devs);

  To implement the command buffer.
  Memset (buf, 0x00, sizeof (BUF));
  buf [0] = 0x01;
  buf [1] = 0x81;

  Open the unit by using the VID, PID,
  and possibly the serial number.
  handle = hid_open (0x4d8, 0x3f, L "12345");
  handle = hid_open (0 x 0461, 0x4d81, NULL);
  If (! handle) {}
  printf ("cannot open device\n");
  Return 1;
  }

  Read the manufacturer string
  WSTR [0] = 0x0000;
  RES = hid_get_manufacturer_string (handle, wstr, MAX_STR);
  If (res<>
  printf ("could not read the manufacturer string\n");
  printf ("string of the manufacturer: %ls\n", wstr ");

  Read the product chain
  WSTR [0] = 0x0000;
  RES = hid_get_product_string (handle, wstr, MAX_STR);
  If (res<>
  printf ("cannot read string\n product");
  printf ("string of product: %ls\n", wstr ");

  Read the serial number string
  WSTR [0] = 0x0000;
  RES = hid_get_serial_number_string (handle, wstr, MAX_STR);
  If (res<>
  printf ("could not read the serial number string\n");
  printf ("string of serial number: (%d) %ls', wstr [0], wstr");
  printf ("\n");

  Read the indexed string 1
  WSTR [0] = 0x0000;
  RES = hid_get_indexed_string (handle, 1, wstr, MAX_STR);
  If (res<>
  printf ("could not read the string indexed 1\n");
  printf ("indexed 1 string: %ls\n", wstr);

  Define the function hid_read() as non-blocking.
  hid_set_nonblocking (handle, 1);
     
  Try reading from the device. It is and must be without
  given here, but enforcement should not block.
  RES = hid_read (handle, buf, 17);

  Send a report on the device
  buf [0] = 0x2;
  buf [1] = 0xa0;
  buf [2] = 0x0a;
  buf [3] = 0x00;
  buf [4] = 0x00;
  RES = hid_send_feature_report (handle, buf, 17);
  If (res< 0)="">
  printf ("cannot send a feature report. \n") ;
  }

  Memset (buf, 0, sizeof (BUF));

  Read a report of the device
  buf [0] = 0x2;
  RES = hid_get_feature_report (handle, buf, sizeof (buf));
  If (res< 0)="">
  printf ("failed to get a feature report. \n") ;
  printf ("%ls", hid_error (handle));
  }
  else {}
  Print the buffer returned.
  printf ("function Report\n");
  for (i = 0; i< res;="">
  printf ("% 02hhx", buf [i]);
  printf ("\n");
  }

  Memset (buf, 0, sizeof (BUF));

  LED toggle (cmd 0x80). The first byte is the report number (0 x 1).
  buf [0] = 0x1;
  buf [1] = 0x80;
  RES = hid_write (handle, buf, 17);
  If (res< 0)="">
  printf ("could not write () \n");
  printf ("error: %ls\n", hid_error (handle));
  }

  Status request (cmd 0x81). The first byte is the report number (0 x 1).
  buf [0] = 0x1;
  buf [1] = 0x81;
  hid_write (handle, buf, 17);
  If (res<>
  printf ("impossible to write() (2) \n" ");

  Read the requested State. hid_read() has been set to be
  non-blocking by the call to hid_set_nonblocking() above.
  This loop shows the non-blocking of hid_read() nature.
  Res = 0;
  While (res == 0) {}
  RES = hid_read (handle, buf, sizeof (buf));
  If (res == 0)
  printf("waiting...\n");
  If (res<>
  printf ("could not read () \n");
  WIN32 #ifdef
  Sleep (500);
  #else
  usleep(500*1000);
  #endif
  }

  printf ("read data: \n");
  Print the buffer returned.
  for (i = 0; i< res;="">
  printf ("% 02hhx", buf [i]);
  printf ("\n");

  hid_close (handle);

  / * Free of static objects of HIDAPI. */
  hid_exit();

  WIN32 #ifdef
  System ("pause");
  #endif

  return 0;
  }

  Hi KIRAN RM,.

  Given that you need example code to access a HID device in windows 7, the question you have posted is better suited for the MSDN Forums. Please post your query in the link next to the support of the MSDN forum for further assistance.

  Windows hardware development

• Error message indicating the problem with the monitor of devices in Windows XP.

  Original title: Device Monitor

  Error message indicating the problem with the monitor of devices in windows xp. How to fix?

  Hello

  1. when exactly you receive this error message?

  2. What is the brand and model of your computer?

  3. What is the exact error message that you receive?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.

• ATAPI - event ID:11 - the pilot detected an error on \Device\Ide\IdePort0 controller.

  I'm getting following error in my event log Watcher:

  Log name: System
  Source: atapi
  Date: 2009-11-01 01:18:38
  Event ID: 11
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: hendrim-PC
  Description:
  The driver has detected an error on \Device\Ide\IdePort0 controller.
  The event XML:
  
   
     
      11
      2
      0
      0 x 80000000000000
     
      53536
      System
      hendrim-PC
     
   
   
      \Device\Ide\IdePort0
      0000100001000000000000000B0004C002000000850100C00000000000000000000000000000000000000000000000000000000004100000
   
  

  Anyone any idea what is the cause?

  I replaced all the cables and hard drive but I get the same error (wasted money).

  When you start the PC and get "PIO MODE" in computer/manage/Device Manager / IDE ATAPI controllers ADA / ATA Chanel X/properties/Advanced is the cause, your PC is frozen.

  My "temporal" solution for this problem is:

  1 - Turn off the PC.

  2 - pick Up and the hard drive cable through the same port of the motherboard

  3. start the PC and the control in the advanced settings box-> "Ultra DMA Mode 6"; right now, you can work without problems.

  * If you can trade your motherboard (all under warranty) DO!

  -. - We are all waiting FOR you than get Microsoft a solution to force the departure to the top of "PIO MODE" to "ULTRA DMA 6"

• Cannot open the synaptics pointing device in windows vista, upgrades are far but message error, unable to connect to the synaptics pointing device

  Hi I have a problem with my mouse/pointer when I click on the mouse to open it I have error message unable to connect to the synaptics pointing device. Have you checked the updates that are up-to-date, and the driver is ok, not sure what to try next need to make any changes to the mouse pointer

  with Brice thanks.

  Hi paiyay,

  Thanks for posting in the Microsoft Community.

  I understand that you are unable to open the synaptics pointing device in windows vista

  · You did changes to the computer before the show?

  · What happens when you click the Yes button in the error message?

  · You are able to use the mouse on the system?

  I suggest you uninstall the software from programs and features and then try to open the properties of the mouse and check if you are able to open the mouse properties then I would you recommend to uninstall the drivers that are installed on the system in the Device Manager and then download the drivers from the link below and check if the problem is resolved.

  http://www.Synaptics.com/support/drivers

  http://www.Synaptics.com/resources/drivers

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Connect the hard disk, and then try running the fix tool of the article below and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  I suggest you to contact the mouse manufacturer for assistance. Click on the link below.

  http://www.Synaptics.com/

  See also:

  FAQ and troubleshooting

  http://www.Synaptics.com/resources/consumer-tips

• Receive error messages when trying to install McAfee and it said their support that the question is related to the error in Device Manager.

  How can you diagnose errors in Device Manager

  Tried installing McAffee, but error message. Contacted McAfee... says the problem is in the Device Manager. How can I determine the error in Device Manager?

  Are you sure you don't have another Antivirus always installed; even an expired subscription?

  A lot of AVs will not install if they find one already installed (and you must have an AV installed in any case).

  Another problem may be how you try to install it:

  You need to download and save on the desktop > then right click on the saved files > select run as administrator.

  FYI: Here's how to look in the Device Manager:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  See you soon.