ATAPI - event ID:11 - the pilot detected an error on \Device\Ide\IdePort0 controller.

Similar Questions

• Windows crashes every 10 minutes for abt 30 sec / 2 min with «the pilot detected an error on \Device\Ide\IdePort0 controller»

  History/context: This problem started happening on my Dell Vostro 220, while he was new (May 09), on Windows Vista that it came preloaded with. I figured a SATA controller and a defective Dell replaced both my HD (& SATA cables) and Mobo. But ongoing problem - then Dell suggested to set access drive in AHCI mode in the BIOS. I did and in HD and installed also XP. Problem persisted. XP errors in the journal system came as '\Device\Ide' and '\Device\Hd0' sometimes sometimes. Reference Dell insists that it is a driver problem Windows. Since then, I still formatted hav clean and installed with Windows 7, what I use now. But the problem persisted.

  System:
  Dell Vostro 220 with Intel Core 2 Duo E7400 @ 2.8 Ghz, 4 GB of RAM (3 GB usable), running Windows 7 Professional 32 bit. 1 x DVD Writer TSST Corp TS - H653F ATA hard drive WDC WD2500AAJS - 75M0A0 ATA

  Symptoms:
  On bad days, it happens every 5-10 minutes; other times 30 min. Locks up system / freezes during 30 sec to 2 min during which I am able to move the mouse cursor, but do not click on anything anyone or do anything else. When Frost "thaws" if I check the Logs of error in the system log I still see the "EventID:11" error "Source: atapi ' 'driver has detected an error on \Device\Ide\IdePort0 controller. Sometimes (not always) I also see a spike in the graph of CPU use if I check right after the "thaw", but I was not able to determine what process as I am looking after the fact. Normally, there are 4 SATA Ports on the motherboard. 0.1 were used for HD, DVD. If I unhook the DVD drive altogether and connect the HD SATA cable to the port marked 2, I get the same errors, but "\Device\Ide\IdePort0" becomes "\Device\Ide\IDePort1".

  Other note (s): During the installation of the OS, Dell has a "Intel Matrix Storage" listed as critical on their site, but when I try to install it, it says "no compatible hardware not detected" and install exists.

  Also, interestingly, if I take the HD (in blue) to the total of SATA cable and try to connect SATA cable from the DVD recorder to the orange (originally) between individual ports Mobo and HD, I get a mobo error - flashing 3 light and "beep" as soon as I turn on. It disappears if I go back to blue SATA cable from the Hd for HD

  Hello

  As you have informed us that you are always faced with the question after installing Windows XP and Windows 7.

  I suspect that the problem is somewhere in the material or the SATA ports on the motherboard. I suggest you to contact the manufacturer of your computer for help, because they will be in a better position to help you.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• EventID:11 - the pilot detected an error in the controller on \Device\Ide\IdePort4.

  I started getting the following error message:

  Log name: System

  Source: atapi

  Date: 16/03/2013 18:36:37

  Event ID: 11

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: Sanja-PC

  Description:

  The driver has detected an error of the controller on \Device\Ide\IdePort4.

  The event XML:

   

     

      11

      2

      0

      0 x 80000000000000

     

      169902

      System

      Sanja-PC

     

   

   

      \Device\Ide\IdePort4

      0000100001000000000000000B0004C002000000850100C00000000000000000000000000000000003000000000000000000000004100000

   
  The last time I had this error was for malware using ESET secruit security check. During which I got like 11 errors with event ID 11 in the observer diary of events. Next, I had warnings of ntfs with event ID: 57:
  Log name: System

  Source: Ntfs

  Date: 16/03/2013-17:24:11

  Event ID: 57

  Task category: (2)

  Level: WARNING

  Keywords: Classic

  User: n/a

  Computer: Sanja-PC

  Description:

  The system failed to flush the data in the transaction log. Corruption may occur.

  The event XML:

   

     

      57

      3

      2

      0 x 80000000000000

     

      169876

      System

      Sanja-PC

     

   

   

     

     

      0000000001000000020000003900048000000000850100C 000000000000000000000000000000000

   
  The system works fine, no freezes or crashes, but I would like to know what is the cause, is it hardware or driver related?

  Hello

  Thank you for contacting Microsoft Community.
  Since you don't face any problem while working, the system works very well. The error in the log occurred due to the error of the driver in this case. But immediately, Windows is taking measures to restore the driver, so that the system works very well. The journal entry is just a notification. During the scan, the higher the use of the disc, so the number of failures is likely to increase. It occurs even in situations where there is a transfer of files.

• What does "a parity error was detected on \Device\ide\idePort0" mean and how can I fix?

  I have a Pentium 4, XP SP3, 2 HDs installed, and I don't think I have SCSI but in my registry, it shows the HDs and two CD - RW and DVD drives listed under SCSI and there is no topic such as IDE, Atapi or AT (the area I'm talking about in the registry is: \HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\) so I don't know what is happening in this area...? Anyway, everything else refers to above devices IDE or Atapi etc..

  As well as the above parity error, I noticed a little more that I will add here:

  "The driver has detected an error on \Device\Harddisk0\D controller" (this is an ALL NEW HD)

  "The device, \Device\Harddisk1\D, has a bad block" (it's second HD giving the same error msg, the last HD failed and this is used)

  "The device, \Device\CdRom0, has a bad block" (this is my CD - RW drive, which seems to work very well, it's the DVD player that is not working properly)

  "While validating this \Device\Serial0 was really a serial port, a fifo was detected. The fifo will be used. »

  All of these errors are coming together for the most part. Please help as I just replaced a hard drive failing during the summer, now it is looking like another is a failure, but I want to know if something else in my computer can cause drives to fail, or causing errors in some way, or any other information anyone can give me to help before you start the process of replacing a HD failure (again!)

  Thank you... Denise

  Hi groovydee,

  Method 1

  I suggest you reinstall the controller and chipset drivers by contacting the manufacturer of the computer, check to see if it helps.

  Method 2

  If the previous step fails, then you need to check disk scan on the hard drive to scan and difficulty of bad sectors on the disk.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: While running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this area if all the data available in this area may be lost.

• Satellite P300-156 - driver detected on \Device\Ide\IdePort1 controller error

  Hello

  I have recently installed a secondary hard drive in my P300-156 and am having some problems with it. I get 11 event IDS in the event log system "the driver detected a controller on \Device\Ide\IdePort1. error" and suffer with very poor performance with this player.

  The drive is new and works fine in other systems and even works ok if I swap bays my P300-156, but the problem with this is that the drive does not fit in the other Bay, as it is quite thick. The player in question is a Samsung HM100UI 1 TB 2.5 "Sata. I also tried other readers in this Bay, and they work well too.

  I am using windows 7 ultimate and the Intel chipset drivers. It's an Intel ICH8M SATA AHCI controller, the 7.0.0.1013 driver version. Have tried different drivers and the AHCI/IDE mode. Also tried a new installation and the problem persists.

  Am at a loss why this disc problems is there anything else someone can suggest to try?

  Thanks in advance.

  > I also tried other readers in this Bay, and they work well too.

  This means that you had problems with the other drives in the second span?
  If Yes, then I guess some problem of compatibility between the P300 and the HARD drive

• Error: A parity error was detected on \Device\Ide\IdePort0 at system startup

  Original title: Windows XP error 11

  Event Viewer maintains with the following messages appears at the start of windows xp,

  The driver has detected an error of the Comptroller on \Device\Harddisk0\D.

  A parity error was detected on \Device\Ide\IdePort0.

  Hi plogmine,

  We recommend that you change the setting of firewall/security at different levels and then try to access files and folders on the network.

  See this article for more information: http://support.microsoft.com/kb/814112

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot detect WLAN & error on device on Satellite L300D-11N Manager

  Hi, I hope you can help!

  I recently bought 2 notebooks of Toshiba L300D-11N for my DD for Christmas.
  I have the same problem with two laptops, where they cannot detect a network.

  In Device Manager, I get an error on an "unknown device" I think that's probably the network card, I can't find listed anywhere in the Device Manager. I don't have an option to repair the unit, only to uninstall or update the driver. I tried to update, but it says I can't.

  The wireless light is amber in color, which tells me means that the wireless in not active, but I can not allow it because the computer does not know its there if it makes sense!

  Anyone have any suggestions to help please?

  Thanks :)

  Do you mean the WLAN or LAN and what OS you have? XP or Vista?

  First you start the laptop, there is an image/installation of Toshiba with all drivers and tools, so not should do no more install to work with the model.

  You can download all the drivers on the Toshiba site: http://eu.computers.toshiba-europe.com
  Or you reinstall the notebooks with the recovery image. I think that s the easiest way, but you can try the new drivers first.

• USB does not recognize the Garmin unit. Error "unknown device".

  Recently, addition of windows 7 Home premium stopped detecting my garmin unit. Other USB devices such as my ipod work very well. I was able to detect the Garmin only a few times, he would try to install the drivers, but the drivers would not install. The garmin was working a few weeks ago. Here is a list of what I've tried:

  1. Reset (after all what I try)
  2. Turn off the computer and leave it unplugged overnight
  3. Completely uninstall all the drivers and the software associated with the kid.
  4. manual installation of drivers
  5. uninstall the unknown device and search for new hardware
  6. uninstall the unknown device and do a search for legacy hardware (which produces a device does not not (Code 10) error)
  7. Go back to a restore point before updating the last windows

  Please, any help would be much appreciated. I'm decently computer savvy and have always been able to solve any problems that I have. This one had turn me my wheels for days.

  Thank you
  L

  Hello

  Try to connect to your garmin unit on another computer in Windows 7 and check if it is recognized.

  See this article to fix the error code 10:

  http://support.Microsoft.com/kb/943104/

  You can also post this question to the garmin forums to get help.

  https://forums.Garmin.com/

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Acrobat Pro XI 11.0 automatically closes after 10-15 seconds ran software repair, run sfc /scan now nothing corrupt, updated the application even handler error.  Any ideas?

  Information system

  Account details:

  User rights: Admin

  User account control: default

  The integrity of the process: not defined

  Profile Type: no

  Details of Acrobat:

  Sandbox: Off

  Captive reader: No.

  Multi player on Desktop Support: Off

  Installed applications:

  Office version: Office 2010 32-bit

  Available physical memory: 1252664 KB

  Available virtual memory: 3997356 KB

  BIOS version: HPQOEM - 1072009

  Default browser: C:\Program may Explorer\iexplore.exe

  Version: 11.00.9600.16428

  Creation date: 24/08/2016

  Creation date: 01:01

  Detail of the display:

  Screen width: 1440

  Height of the screen: 900

  Number of monitors: 1

  Number of buttons: 3

  At the mouse wheel: Yes

  A Pen Windows: No.

  Character set double byte: No.

  The input method editor: Yes

  On the inside of the screen reader: No.

  Graphics card: Intel HD Graphics

  Version: 8.15.10.2712

  Check: Not supported

  Installed Acrobat: C:\Program Files (x 86) \Adobe\Acrobat 11.0\Acrobat\Acrobat.exe

  Version: 11.0.14.16

  Creation date: 17/12/2015

  Date created: 18:27:12

  Locale: English (United States)

  Monitor:

  Name: Intel(r) HD Graphics

  Resolution: 1440 x 900 x 60

  Bits per pixel: 32

  OS manufacturer: Microsoft Corporation

  Name of the operating system: Microsoft Windows 7

  OS version: 6.1.7601 Service Pack 1

  The page file space: 4194303 KB

  Processor: Intel64 family 6 model 42 Stepping 7 GenuineIntel ~ 3392 Mhz

  Details of the session:

  Startup type: Normal

  Stop: No.

  Network: available

  Inside the Citrix: No.

  Inside of VMWare: No.

  Remote session: No.

  Remote control: no

  With the help of JAWS: No.

  Using Windows-Eyes: No.

  With the help of NVDA: No.

  Name of the system:

  Temporary directory:

  Time zone: Eastern Standard Time

  Total physical memory: 4079632 KB

  Total virtual memory: 4194176 KB

  Details of Windows:

  Tablet PC: No.

  Starter Edition: No.

  Media Center Edition: No.

  Slow the Machine down: No.

  Windows directory: C:\Windows

  Plug-ins installed:

  C:\Program Files (x 86) \Adobe\Acrobat 11.0\Acrobat\plug_ins\Accessibility.api

  Version: 11.0.14.16

  Creation date: 17/12/2015

  Date created: 18:27:20

  C:\Program Files (x 86) \Adobe\Acrobat 11.0\Acrobat\plug_ins\Annots.api

  Version: 11.0.14.16

  Creation date: 17/12/2015

  Date created: 18:27:20

  reset your preferences - https://forums.adobe.com/thread/1595848?start=0&tstart=0

• Driver has detected an error in the controller on \Device\CdRom0

  I have a laptop running Vista Home Premium 32 Bit.  The DVD - RW drive is not working after that the PC wakes up from sleep mode.  I get the following error.

  "The pilot detected an error on \Device\CdRom0 controller."
  Log name: System
  Source: cdrom
  Event ID: 11
  Level: error

  I already tried the MS-Fix-IT solution and MS Knlowledge base 314093 bolt torque and 154690 nothing helps.  I really saw all other posts with this same problem.  The drive to function properly when the PC starts first, but it runs just when I put in a disk after getting out of the mode standby.  The system also has stop some time when I try to reject the disc turns, but it eventually starts fine.

  I appreciate any help I can get with this problem.  Please let me know if I can provide more information.  Thank you!

  Hello

  1 do these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------

  2 try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This update the default driver stack and help clear corruption.

  ------------------------------------------------

  3 use these methods to solve the outstanding issues.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• The driver has detected an error of the Comptroller on \Device\Ide\IdePort3

  Hello

  I'll try to explain my problem as best as possible in chronological order then please bear with me.

  I have Windows 7 x 64.
  So last week my PC have been freezing every two days. Sometimes every day. Black screen during the games, navigation or doing any activity. Each window has frozen, the screen went black. ctrl alt del did not work no response to any entry, the only option was to restart.

  Once restarted, the system would freeze again almost immediately, and again after another reboot. Only solution was physically turn off the computer, turn off the power and wait.  After some time (5-10 min) I turn the power on and system worked very well.

  I went to the observer of events and found "the pilot detected an error of the Comptroller on \Device\Ide\IdePort3." It took place in a series starting with a per minute, then after a few minutes, two or three that occur within one minute, the frequency of this error would be gradually go back even to 10 per minute and that's where the system would freeze.

  Looking at the event viewer I thought, hold for a second I have 3 discs (Disk0 - new SSD, Disk1 - new HDD, Disk2 - old HDD) so maybe that ideport3 refers to the CDROM which I disconnected but the error has not disappeared.

  Check the BIOS settings and deleted everything that had no boot from the internal storage (so: floppy USB - disk, CDROM,)-which did not help either.

  In the Act of desperation, I unplugged my old disk (Disk2) for 6 days I have not known of IdePort3 errors and system will work very well.

  After 6 days, to my embarrassment, error returned.
  This is the story of the appearance of the error:

  10/05/2015 19:56 - after that, I unplugged old hdd
  16/05/2015-09:35
  16/05/2015 14:34
  16/05/2015 14:34
  16/05/2015 14:34
  16/05/2015 14:34
  16/05/2015 14:35
  16/05/2015 14:36
  16/05/2015 14:36
  16/05/2015 14:37
  16/05/2015 14:37
  16/05/2015 14:37
  16/05/2015-17:28
  16/05/2015-17:29
  16/05/2015-17:31
  16/05/2015-17:33
  16/05/2015-17:33
  16/05/2015-17:34
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:37 - after this system error stopped

  Here are the details of the error

  -
  -
   
    11
    2
    0
    0 x 80000000000000
   
    107016
    System
    Odin
   
   
  -
    \Device\Ide\IdePort3
    0000100001000000000000000B0004C004000000850100C00000000000000000000000000000000001000000000000000000000005100000
   
   
   
   
  Let me know if you all the news and thank you for your time in reading my number.

  I bought the card mother-GA-Z68X-UD3-B3 3 years ago. There can be no IDE ports. It has 6 SATA ports.

  Here an explanation somewhat losely formulated to work on the port that could be the culprit. Since you have 6 SATA ports, why not play the game of elimination with them?

• Message error "the driver detected a controller on \Device\Harddisk5\D error.

  In the observer event system log I get errors saying "the pilot detected an error of the controller on \Device\Harddisk5\D. Sometimes these are the 2\D or 3\D or 4\D instead of 2\D. Aid says it's a break in the cable, but I tried new cables and old that work before. Help

  In the observer event system log I get errors saying "the pilot detected an error of the controller on \Device\Harddisk5\D. Sometimes these are the 2\D or 3\D or 4\D instead of 2\D. Aid says it's a break in the cable, but I tried new cables and old that work before. Help

  It could be malware believe it or not. It could also be a failing hard drive. I recommend that you first scan your computer with scanners on the links below ensuring that update you before the analysis.

  Malwarebytes.org

  SUPERAntiSpyware.com

  If the scans are own return, you will need to go to the website of the manufacturer of your hard drive and download the diagnostic tool for your hard drive. It will probably take an iso that burn you to a disc and make it bootable. Let me know the results of the analysis, and we'll go from there.

• The driver has detected an error of the controller on \Device\Harddisk1\DR1. What is the cause?

  I get this message on 7 11 windows event log IDs ' driver has detected an error in the controller on \Device\Harddisk1\DR1. "" The message keeps poping up when ever I insert my usb memory key but the DR number changes when I swap beetwhen and other memory usm drives exmp usb ports. "The driver has detected an error of the controller on \Device\Harddisk1\DR3." otherwise, my system is runnig perfect.

  Hello

  Check the drive for errors and see if it works fine it after.
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
  The link above includes steps for the same.
   $C God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

• Flex Builder detects more errors against the definition of the Array class.

  Hello

  I don't know if this is the right forum to post this problem, but here goes.

  I've been developing an application using Flex Builder 3. Today, I met a strange problem. When I use a table variable in an Actionscript class, the compiler detects more errors against the class definition. I have only encountur this behavior with the Array class. Other classes of higher level, seem to work. F.i. I can insert the following text in a function:

  var a: Array = [1, 2, 3];

  var i: a.Len;

  After construction, I get no error. When I run the application, the variable I is set to 0.

  I tried to clean up the existing project. I created a new project in flex from scratch. The problem remains.

  I did not have any updates lately, f.i. flash player, java,... the development environment has not changed as far as I know.

  Can someone give some advice about this problem? Thank you.

  Kind regards

  Wim.

  The table is a dynamic class, as an object, which means that it is perfeclty happy to return values for properties that have never put. These values will be "undefined", which, when converted to an integer, turn into 0. This is the kind of unfortunate behavior, but there is no way to get around.

• My Event Viewer says ATAPI: the driver has detected an error in the controller on \Device\Ide\IdePort1

  My computer (W7/64) sometimes fall to restart. I checked HD and the memory of Mrs. rescue disk - no error.
  Event Viewer says ATAPI: the driver has detected an error in the controller on \Device\Ide\IdePort1.
  The fact is that the cd-rom drive is behaving oddly. Reads the DVD of film without problem, but does not read floppy disks to install Windows (good on an another two comps).
  I therefore launched Verifier.exe and checked the other drivers. The result is dumpATA.sys is not running. (Is BTW not MS driver?).
  How can I force to load this driver?

  I checked the installation disc to compare the original version, boot.win opened, but the pilot is nowhere. Where did it come from?
  So I recorded the dump file, but the analysis of what this file is beyond my capabilities.
  Link to my file https://skydrive.live.com/redir?resid=4AF01405E5CE0354 dump! 114

  You could any body help me to find the source of my problem?

  Thank you.

  These are all good things:

  *****************************************************************************
  * *
  * Bugcheck analysis *.
  * *
  *****************************************************************************

  KERNEL_DATA_INPAGE_ERROR (7A)
  The requested page of kernel data could not be read in.  Usually caused by
  a bad block in the disk controller or paging file error. See also
  KERNEL_STACK_INPAGE_ERROR.
  If the error status 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
  This means that the disk subsystem has suffered a failure.
  If the status of the error is 0xC000009A, it means the query failed because
  a file system has failed to move forward.
  Arguments:
  Arg1: 0000000000000020, type of lock which took place (1,2,3 or PTE address value)
  Arg2: ffffffffc000009d, error state (state code of e/s normally)
  Arg3: fffffa80077f95b8, the current process (virtual address for the lock type 3 or PTE)
  Arg4: 0000000000000000, virtual address that could not be paged in (or the contents of the PTEs if arg1 is a PTE address)

  Debugging information:
  ------------------
  ERROR_CODE: (NTSTATUS) 0XC000009D - STATUS_DEVICE_NOT_CONNECTED
  DISK_HARDWARE_ERROR: Error occurred with disc material
  BUGCHECK_STR: 0x7a_c000009d
  CUSTOMER_CRASH_COUNT: 1
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  Nom_processus: System
  CURRENT_IRQL: 1
  LAST_CONTROL_TRANSFER: from fffff80002c7fcac to fffff80002c8bc00
  STACK_TEXT:
  fffff880 '03578-88 fffff800' 02c7fcac: 00000000' 0000007 a 00000000'00000020 ffffffff 'c000009d fffffa80' 077f95b8: nt! KeBugCheckEx
  fffff880 '03578-90 fffff800' 02c74ba7: fffffa80 '077f9550 00000000' c000009d 00000000 00000000' fffffa80' 077f95e8: nt! : FNODOBFM: 'chain' + 0 x 50080
  fffff880 '03578b 50 fffff800' 02c7e617: fffffa80 ' 07654b 50 fffffa80 '07654ba0 fffffa80' 077f9550 fffffa80 ' 077f95b8: nt! IopCompletePageWrite + 0 x 57
  fffff880 '03578b 80 fffff800' 02c8181d: fffffa80' 07654b 50 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiDeliverApc + 0x1c7
  "fffff880 ' 03578 c 00 fffff800 ' 02c4e4fb: 00000000 00000010' fffff800 '00b 96080 00000000 00000000' fffff800' 02c229a0: nt! KiCommitThreadWait + 0x3dd
  "fffff880 ' 03578 c 90 fffff800 ' 02c229fa: fffffa80 '07654b 50 00000000 00000001' fffffa80' 069ed040 00000000' 00000000: nt! KeWaitForGate + 0xfb
  fffff880 '03578ce0 fffff800' 02f29ede: fffffa80' 07654b 50 00000000'00000000 00000000'00000080 00000000'00000001: nt! MiModifiedPageWriter + 0x5a
  "fffff880 ' 03578 d 40 fffff800 ' 02c7c906: fffff800'02e06e80 fffffa80 '07654b 50 fffff800' 02e14cc0 00000000' 00000000: nt! PspSystemThreadStartup + 0x5a
  "fffff880'03578 d 80 00000000 00000000': fffff880'03579000 fffff880 ' 03573000 fffff880 ' 03578a 80 00000000 00000000': nt! KxStartSystemThread + 0x16
  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! : FNODOBFM: 'chain' + 50080
  fffff800'02c7fcac cc int 3
  SYMBOL_STACK_INDEX: 1
  SYMBOL_NAME: nt! : FNODOBFM: 'chain' + 50080
  FOLLOWUP_NAME: MachineOwner
  MODULE_NAME: nt
  Nom_image: ntkrnlmp.exe
  DEBUG_FLR_IMAGE_TIMESTAMP: 5147d9c6
  FAILURE_BUCKET_ID: X64_0x7a_c000009d_nt! _ ?? _::FNODOBFM:_string_ + 50080
  BUCKET_ID: X64_0x7a_c000009d_nt! _ ?? _::FNODOBFM:_string_ + 50080

  And this page explains what you have:
  http://msdn.Microsoft.com/en-us/library/Windows/Hardware/ff559211 (v = vs. 85) .aspx >
  (Short version of an argument 9 d: "0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective wiring or in bulk, termination or that the controller does not see the hard drive.")

  It seems to intimate that it's a hardware problem rather than a driver. You say that you are having problems with the optical drive. If you log out, you still have problems to restart or boot?

  This probably isn't a memory problem, but a better method of verification, it is with Memtest86 + http://www.memtest.org/#downiso>
  Download the ISO and then create a CD with it and boot from it. If you have more than one piece of RAM, pull all but one test, then close, replace it with another and test, etc. I find it a little faster than the test at a time.

  SC Tom