WANT to 750-055 CTO: 750-055 CTO Intel RST ENVY

Similar Questions

• Games on Z580 i7, 8 GB RAM, 750 GB HDD, Intel HD 4000

  Games on Z580 i7, 8 GB RAM, 750 GB HDD, Intel HD 4000.

  Will call of duty black ops 2 work on this system? or any other game like skyrim etc.-J' only found out after I bought the laptop integrated intel HD 4000 processer is not very good for gaming...

  Thank you

  Lewis

  The integrated gpu is at fault. You will need to replace the entire notebook to get a good new gpu. You cannot make changes to your laptop current.
  And welcome, I have the honor to help you :-))

• Want to 750 - xt 550 (CTO): Desktop problems Bang and Olufsen Sound of 750 - xt HP Envy with the brand-new office

  I bought a new system and it arrived yesterday, in the introduction, I have a 5.1 speakers Creative Labs system (which worked perfectly in my previous HP media center PC) I'm connected (using the catch green, black and Orange on the back of the system).  Using the Bang and Olufsen 'test' feature, I hear from "front speakers' (green connector), the Center and the subwoofer (Orange wire) no sound from the surround speakers (black wire).  The sound is HORRIBLE, roaring, low volume, just horrible.

  If I pass the black cable (surround) at the entrance to white (side speakers) I can hear the sound on the 5 speakers, it's always horrible and very, very disappointing!  I spent over 4 hours on the phone last night with HP Support who told me, in conclusion, that my system does not support sound 5.1, I will be able to use Stero (i.e., the Green connector).  My number is 3023344605, the discussion was just a mess.

  Can somone suggest please how can I get my sound working properly?

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.
  If you are unfamiliar with works as a private of the Forum messages, this post has instructions.

• 750 - 055xt CTO M0K53AV #ABA envy: HP has encountered an error when trying to analyze your product

  I use a brand new HP Envy 750-055xt CTO. Added the SSD (Samsung 850 EVO 120 G) and 16G Ram (Total of 24G (from Crucial)). The Win 7 OS has migrated to SSD and formatted the original drive for the purpose of storing files to a printer large format (new HP Latex, which will happen later this month).

  Attempted to install Windows 10 but had multiple failures with error 0x80073B92 - 0 x 20009.

  Disconnected SSD in case it was originally the above error, restored the system using created recovery DVD to state of origin (but always with 24 G of Ram).

  In trying to pilot research and updates to bios on the HP support page, I now encounter error "HP has encountered an error when trying to analyze your product" which leaves me to proceed, except to order the DVD of restoration Windows 7.

  I know I'm forgetting something in this whole procedure, but I have no idea at the moment what it could be.

  This can help with the installation:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-windows_install/Windows-10-upgrade-failed-with-0x80073b92-0x20009/15eaaeab-9ECB-4C06-bd8d-62c783d51cf6?auth=1

  HP site:

  http://h30434.www3.HP.com/T5/notebook-operating-system-and-recovery/error-while-trying-to-scan-product/TD-p/5369812

  Hope this helps

• Desktop HP ENVY - 750-150xt CT: Model HP ENVY Desktop - 750-150xt CTO - DVD and specifications

  My new HP computer includes a "Ultra Slim tray SuperMulti DVD Burner", but I have been completely unable to find a model ID or plug on this unit.  I did find a datasheet on the HP dvd940i device, but have no reason to believe that it is the device in my computer.  Anyone know where to find the details, hopefully without having to open my computer.

  Thank you.

  Hello

  Please download and install the following tool, it will show you all the:

  http://www.VSO-Software.fr/products/Inspector/Inspector.php

  as shown:

  

  Kind regards.

• Want to 750-209: how to connect an old sound system to a new computer

  I wanted a new 750-209 and a former speaker of Cambridge Soundworks PCWorks 19th Point Surround 4 + under low voltage. There are 2 connector; Left and right who are article 3 (each take manages 3 drivers). The envy has 1 output. It seems that I need a derivation ending in female connectors.

  My question? How to connect the two? Is it still possible? I'd hate to have a decent sound system of junk. My needs are basic - just to be able to listen on AOL or YouTube.

  Any ideas on how to accomplsh my goal.

  Just to close this debate; unfortunaely the quick response has not responded to the problem. BestBuy has suggested that I try a composed of derivation of a shot and 2 containers. Finally, I got the system works 'after' discovery that the enormous power brick disliked the new arrangement of power when I replaced the old computer with the desire. I had to replace an adapter 3 - wat and consolidate the brick. A lot of noise to get her old system to work but now I have the choice of speakers or headphones driven by a hold on a HDMI monitor. All's well that ends well. Thanks for the interest.

• Want to 750-114: migrate another computer with SSD

  Hi all

  Im trying to replace my old PC with this desire 750-114.  I have an SSD on my old PC and would like to just transfer the SSD to my envy again as the main drive.

  I couldn't find any driver motherboard online and I don't want to clone the hard disk on my new PC I want to keep all the files on my old intact SSD.

  is it possible to boot from my old SSD?

  Thank you!

  weidake

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your message want to migrate a SSD from one PC to another and wanted to help.

  Simply boot the second PC since a SSD at the first - No..  IF the PC had identical hardware, then maybe, but with a different material, the necessary drivers will be missing and the PC does not start.

  There is a way to actuall "migrate" from the old PC to the new one, using the same player - but it involves costs and considerable work.

  Macrium Reflect allows image and restore the PC and they have an option that you can do whatever you want - mainly migrate everything from your old PC to the new - it's called the redeployment, and it is not available in the free version.  You must buy the Home version.

  The way it works in your case is that you buy Mr., install on a PC and use the option to create the bootable rescue media.

  Then you put the old SSD in the new PC, insert the bootable rescue media and boot into MR.

  Once it is running (it may take a few minutes to load), follow the instructions in this thread (from step 3): http://www.macrium.com/help/v5/How_to/Redeploy/ReDeploy_a_system_to_new_hardware.htm

  Mr. then read drivers (from support that you provide) and replace the drivers on the SSD with the drivers for the new PC.

  NOTE: If you do not have the drivers for your new PC in one place, and then download and install DriverBackup - you can use this to backup all the drivers in a single folder.

  But it's only PART of the solution (I said that some work is involved!)

  The former DSS had active Windows using the license on the old PC - and OEM licenses are not transferable from one PC to another.

  If the new PC is preinstalled with Win8x or newer, you can retrieve the info from following these instructions (based on 90 days version) license:

  (1) for Windows 8 x: key product - find for Windows 8

  (2) for Windows 10: download the OEM of Windows - MajorGeeks product key tool

  You will then need to manually enter the product key found by the tool to activate Windows again on the new PC.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Want to 750-111: HP ENVY 750-111 SET UP

  I have a HP Envy nine computer office 750-111 and try to put in place - I don't find no where to plug them into the Web can please help me?

  @Leslie78, welcome to the forum.

  Here are the i/o ports of back on the computer:

  Figure: Back of Odense i/o Panel

  1. USB 2.0: 2

• Want to 750-124 HP: HP 750-124 power PCI for Geforce GTX 950 video card connection

  I oened my HP Envy 750-124 to add a videocard GeForce GTX 950 and 6 pin PCI power cord to power the card could not be found. There is a PCI Express slot present on the motherboard, but no way to connect the power supply Board. So what don't understand me?  Thank you.

  You're welcome, @DFB2.

  The difference in both models, is that the 700-074 craving came with an installed 460W PSU.  That might be enough to run the GTX 950 correctly.  Even some of these PSU is not additional power adapters.  It depends on a lot of other components that are installed in the computer.  Video card manufacturers give room for all situations.  Normally, I would recommend buying a PSU that is at least 100W above the manufacturer stated minimum requirements.  I hope that explains the situation better.

  Here are the Product Specifications for the power supply in the 700-074:

  Form factor: ATX internal
  Total wattage: 460W
  Nominal input voltage range:
  100-127V/3A (50-60 Hz)
  200-240 v/2A (50-60 Hz)
  Dimensions: 150 x 140 x 86 mm (5.9 x 5.5 x 3.4 inches)
  * This power supply has an LED to indicate a possible failure condition when the light is off and the power is connected.

• Want to 750-114: graphics card update

  I had only my HP Envy 750 - 114, less than a week but discovered that the integrated graphics card does not well with my Poser 11 3d modeling software or the online games like Second Life. When I bought the computer, I was told that the graphics card was better than my old HP Envy H8-1534. The graphics were amazing with that. Maybe I'm doing something wrong, or something was not well defined, but I expected better graphics.  I hope I can improve my graphics even if it is integrated. I don't know what I should look or if I can. I'm not very teckie.

  Overall, I love the computer and I'm happy with everything.

  Any help is greatly appreciated and I thank you in advance

  ArcticFire-AK, welcome to the forum.

  I checked the system requirements for the program and the game you mentioned.  It seems that your system should work well with both.  However, integrated graphic card and video isn't always good for the games.  It's more for daily tasks such as navigation.

  You have "1 PCI Express x 16 (Gen 3.0)" slot for a video card.  I love EVGA cards.  Here's a map of willing to work pleasantly in your computer.  Read the reviews to see what users have to say about it.  The State of the plug she needs at least a 300W power supply unit (PSU) to function properly.  However, some members have reported that 400W would be better.  If you don't get this card, I recommend to try it with your PSU existing prior to the upgrade.  If necessary, I would buy one at least 600W and modular.  I love the Corsair PSU.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Want to 750-114: 10 Start button not working not properly

  When I left click on the windows icon to set up the list of programs and 10 button to bring up the apps page to start nothing happens. It started last week.

  Don2498

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on the button start Win10 is no longer working and I wanted to help.

  People with MS by pushing the Win10 updated weekly, it is not uncommon for a working PC suddenly that things stop working.

  Here, it's a simple solution, but as shown in this thread related, is not: bar of tasks/Start button not working not!-Windows 10 Forums

  All what I can say is that you work through this thread and hopefully, any of the fixes will work.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• want to 750-114: the usb flash drive boot / bios ver FRIEND A0.12

  Trying to set the Bios to boot from to insert a flash drive but does not. What do I need to turn anything, or press any key combination? Please provide instructions. Thank you

  Hello @felihdez,

  Welcome to the Forums of HP Support!

  I read your post on the matter of BIOS and wanted to help you!

  First of all, try to review the following document and let me know how it goes:

  HP computers - configuration of the Boot order in the system BIOS

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• want to 810-430qe CTO: 810-430qe CTO... of the usb ports 3.0 and 2.0 ports, which are which?

  computers HP do not seem to come with a simple explanation of usb port scheme and since there are a dozen of them, I would like to know precisely which are which?    Help, please...

  Hello @mikesoares,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I read your post on USB ports and wanted to help you!

  USB 2.0 ports are black while the USB 3.0 ports are blue.  Please see the picture below, which shows the ports at the back of your desktop:

  Figure: Kaili2 back i/o ports

• Want to 700-515xt CTO: Support for 1440 p HD 4600 graphics card

  I am running a 1080 p with an integrated graphics Intel HD Graphics 4600 a HDMI monitor and DVD I out with 10 64-bit Windows.  I want to start a monitor 1440 p with the 4600.  I do not find the specifications for the 4600 and so do not know if can manage 1440 p and if so which port should be used.  Any guidance would be appreciated.

  Colion, welcome to the forum.

  According to these information , Intel, the 4600 will support up to 4 K resolution.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Want to 750-055XT: new computer does not start

  The computer starts nine on eon can't. Customer support attempts were in vain. Yesterday evening was told to perform a test on the drive hard and at the request of a call, but never followed. Computer started this morning, but after a stop (stop through Windows), attempts to restart failed. 40 minute wait estimated with the horrible horrible music and recorded wife makes me crazy. Should I return it and get my back money and shop elsewhere? It was a horrible experience.

  Greetings,

  No point troubleshooting your PC isn't new.

  Return for a refund as soon as POSSIBLE!

  See you soon!