Want to list Status "Unknown" VM power CLI

Similar Questions

• Connection status: unknown. The dependency service or group was able to start.

  Greetings!  I have a year old Dell Inspiron.  Everything worked fine last night, but when I woke today I couldn't connect to the internet.  When I put the cursor on the network icon, it says "connection status: unknown."  The dependency service or group was able to start. "My Windows Firewall is also disabled and I can't activate it automatically or manually.  In addition, the Windows Diagnostic tool cannot be turned on, and whenever I try to activate the Diagnostic Policy Service it also can not be done. It says "error 5: access is denied" when I try to turn it on manually.

  My antivirus (Avira) software is fully up to date from last night.  I even took it into Best Buy and they did a diagnostic test to ensure that a virus is not the cause.  The guy there said it was a software problem.  I tried resetting TCP/IP (netsh winsock reset) without success.  I also tried sfc/scannow in safe mode and windows without success.  Are there other options?

  Thanks in advance.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Battery Check status: unknown (90)

  HP dv4-2165dx running Windows 7 64 bit with Support Assistant 5.2.9.2 and battery check 4.0.16.0

  Battery status says 'unknown', with the 100% battery charge.  Battery seems to work very well, but not checking the battery does not seem to be able to connect to it.

  When you run the battery check, it returns

  Status: Unknown (90)

  The long description is:

  Main battery

  An error occurred trying to access the battery.  Please re-insert the battery and the power adapter for a new test of the battery.

  The suggestion is to turn it off, replace the battery and AC power, I did several times.  I also followed the procedures outlined in another post about a battery check status unknown (94)... but no change.

  How can I correct this condition such that I can get a battery status check valid, like 'OK', 'Calibrate', 'Replace', etc.

  Is there a * easy * way to clean the battery contacts?

  Note: Diagnostics of HP you can run before Windows (tube exhaust when starting) indicate that the battery is "defective", perhaps because the diagnosis can also access chip smart battery.

  There is no other assignments by mentioning the battery... check (90) advanced status code just to code (94) elsewhere.

  Thanks for your help.

  db808

  Found the solution!

  There is a new version of firmware, version F.0F (appears as 'F' to the poster information) which is available in the download section software.  Version F.0F is documented as the resolution of a problem with checking Service Advisor 5.x and battery.

  I downloaded the firmware update, installed and then re-directed to battery check.  Now I have a proper status, with detailed battery status is displayed.  In my case, the battery is about 2 years old and needs to be calibrated.  But I now have a status legitimate and can go through the calibration process.

  Note: I use Advisior of Service 5.2.9.2 and says there is no update additional software that apply... .but Advisior Service missing update of Firmware and will not download and install it.

  According to the notice of Release Firmware, this firmware version applies to several laptop models.

  After I calibrate my battery, I'll try running battery check and start diagnostics.  Diagnostics boot time also scored as battery being defective in the past... with the older firmware.

  I'll post my results once completed.

  Hope this helps someone.

  db808

• VMware power cli version

  Hi experts,

  I'm new to vmware power cli, so please excuse stupid request. -

  I have vcenter 6.0 and I want to know what power cli version should I download to connect to vcenter, is limited with the VC version or I can download any version of vmware cli power.

  I need windows electric cli to run vmware cli power.

  Thank you very much in advance.

  Concerning

  KP

  You can find this info in the VMware product interoperability Matrices

  You must PowerCLI 6.x

  

• Creation of computer virtual using Power CLI

  Hello

  I'm attaching to deploy virtual computer using power CLI but I get the error like below below:

  I use the script below to deploy the VM model exisitin

  New-vm-name testvm005 - VMhost home - model TMPL_W2K3_STD_SP2_R2_x86 - datstorename - OSCustomizationspec-W2K3-ENT-R2-SP2 data store - 32 bit

  New - VM: 25/05/2011 10:37:09 New-VM parameter specified ' Templa
  you ' expect a single value, but your name criteria "TMPL_W2K3_STD_SP2_R2_x86" c
  orresponds to multiple values.

  Can somone help out me on this...

  It seems that if you have more than 1 model with that name in your vCenter.

  Make one

  Get-model

  to check it out.

  If you want to use a specific template, you will need to find a distinctive feature.

  Suppose for example that the model that you want to use is located in a folder named MyTemplates, then you can do

  $template = get-Template-name TMPL_W2K3_STD_SP2_R2_x86-location (Get - file - name MyTemplates)
  

  New-vm-name testvm005 - VMhost home - model $template Datastore - datstorename - OSCustomizationspec W2K3-ENT-R2-SP2 - 32-bit

• Failure of power CLI remove Datastore

  The Installation of ESXi generates a "datastore1".

  It is possible to generate an additional data store named 'Datastore1' via PowerCLI.

  The name is keysensitive, because it is not possible to generate an additional "datastore1".

  I have the following problem:

  With CLI power, it is not possible to remove the Datastore1 or datastore1.

  the command remove-data store with the parameter of the data store name cannot remove the data store,

  with error: there is more than one object with the name 'datastore1 '.

  In this command, the name is not supported keysensitive.

  It is not possible to use the ID of the store of data as a parameter for the deletion.

  Anyone have an idea how I could handle this problem with Power CLI?

  Thanks for the help!

  Chris

  What you can do to remove a specific data store, is to use the operator - ceq PowerShell which performs a case-sensitive comparison. Something like:

  Get-Datastore | Where-Object { $_.Name -ceq "Datastore1" } | Remove-Datastore
  

  If you want to remove both you can do:

  Get-Datastore | Where-Object { $_.Name -eq "Datastore1" } | Remove-Datastore
  

  Robert

• Replication status UNKNOWN?

  I have a suffix of data using the configuration information of Solaris and the DSCC suffix that both configured for multimaster replication over SSL ports. I tried in every way that I've been able to think of this day, and they seem to work. What confuses me is the output of the status command (the two suffixes show similar output):
  
  $ dsconf see the repl-agmt-registered - p 3998 w/var/opt/SUNWdsee7/dcc/ads/config/dsadmpwd cn = dscc host1.company.com:3999
  Cannot bind firmly on 'host1.company.com:3999' with the specified credentials.
  
  Configuration status: UNKNOWN
  Authentication status: UNKNOWN
  Initialization status: UNKNOWN
  
  Status: enabled
  Date of last update: October 20, 2010 14:00:26
  
  There are two things that bother me:
  
  First of all, the "Unable to bind solidly" line. If she cannot bind firmly, then how replicates data?
  Second, how should I interpret the status "UNKNOWN"? Is this normal with SSL? If this is not the case, what should I watch?
  
  Thank you
  Chris

  Don't worry about the UNKNOWN status, etc... This is shown on a system that works as well.
  With regard to the SSL protocol, if you want to connect using the Protocol ssl no, add e option

• When I start the listener, I get the following "status UNKNOWN"...

  Oracle 11g R1 on Oracle Enterprise Linux
  
  
  Here is the configuration of my listner
  **********************************************************************
  [oracle@oracle-test admin] $ cat listener.ora
  listener.ora # Network Configuration file: /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
  # Generated by Oracle configuration tools.
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME=/u01/app/oracle/product/11.1.0/db_1)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (GLOBAL_DBNAME = orcl.o - test.mydomain.name)
  (ORACLE_HOME = u01/app/oracle/product/11.1.0/db_1)
  (SID_NAME = orcl)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xx.xx.xx) (PORT = 1521))
  )
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  )
  )
  
  *************************************************************************
  
  
  
  
  When I start the listener, I get the following messages of "Status UNKNOWN".
  
  
  Why?
  
  
  
  [oracle@oracle-test bin] $. / lsnrctl start
  
  LSNRCTL for Linux: Version 11.1.0.6.0 - Production on February 19, 2010 11:22:04
  
  Copyright (c) 1991, 2007, Oracle. All rights reserved.
  
  From /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr: Please wait...
  
  TNSLSNR for Linux: Version 11.1.0.6.0 - Production
  System settings file is /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
  Log messages written to /u01/app/oracle/product/11.1.0/db_1/log/diag/tnslsnr/oracle-test/listener/alert/log.xml
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=xxx.xx.xx.xx) (PORT = 1521)))
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=xxx.xx.xx.xx) (PORT = 1521)))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for Linux: Version 11.1.0.6.0 - Production
  Start date February 19, 2010 11:22:04
  Uptime 0 days 0 h 0 min 0 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora file
  The listener log file /U01/app/Oracle/product/11.1.0/Db_1/log/diag/tnslsnr/Oracle-test/listener/alert/log.XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=xxx.xx.xx.xx) (PORT = 1521)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
  Summary of services...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  Service "orcl.o - test.mydomain.name" has 1 match (s).
  Instance "orcl", status UNKNOWN, has 1 operation for this service...
  The command completed successfully

  There is nothing to worry about it. UNKNOWN means, the listener knows the orcl SID because of the list of SIDS. This is called static record. If your instance orcl's up, PMON dynamically registers the listener (if you are using port 1521 without additional configuration), which leads to a READY State.

  Kind regards
  Uwe

  http://uhesse.WordPress.com

• Why is my iPhone 5 number listed as 'unknown' and not listed in iMessage and FaceTime?

  I am a customer of StraightTalk. Originally, I had an iPhone CDMA 5 purchased directly from this company. After three years, the battery swelled and I came out of the Apple Store on Thursday with a replacement. After inserting a SIM to speak directly into the device and setting up, I can make calls, send text messages, use the cell data, etc.

  However, my phone number in the settings is listed as 'unknown', and it is not listed at the top of the contacts screen. I can't send messages in my phone number iMessage, because it is not even listed as an option. Ditto for FaceTime. After several hours on the phone with Straight Talk, they determined that my phone service is configured properly, and it is a phone number.

  Does anyone have a solution for this? It is incredibly frustrating that the iPhone 5 does every thing I need to do, and I prefer to keep my phone from replacement $ 75 for three years before moving on to an iPhone SE.

  Hello, smirza!

  Thank you for using communities of support from Apple!  What I understand in your post, you got a replacement iPhone 5 and have found that your phone number is not listed in settings > phone and iMessages/FaceTime.  Your number should certainly be in all those places, so I'm happy that you came here, then we can help you understand what is happening together.  Check with your mobile provider was a big first step.  I have other ideas for you as well:

  1. It seems that you already have the latest version of iOS (9.3.4), but we will also check your carrier settings are up to date: iOS: update your carrier settings
  2. If you haven't already done so, save your iPhone on iCloud or iTunes: How to backup your iPhone, iPad and iPod touch
  3. On your iPhone, go to settings > Contacts > My Info and make sure that your personal contact (with your iPhone phone number) card is selected.
  4. Go to settings > phone > my number and see if you are able to manually, enter your number and save it.
  5. If none of these steps work, try to restore your phone from the backup that you made: restore your iPhone, iPad or iPod touch from a backup
  6. If you still don't see your issue, try restoring your phone as a new and see if your number is: use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings

  Have a fantastic week!

• Uupdate plugin page has all the plug ins listed as unknown, and to the title of the ACTION, there '? Search "; Why has this changed?

  When I checked today to see if no plug-ins needed for the update, all plug-ins have been listed as unknown and in the Action column, there '? Search ". It's never happened before. Thanks for your help.

  I could be the page is out of service.

  Go to the web page. Once the page loads, mouse to the address bar
  and left click the icon. A window to display information of site should
  developed. Now select permissions. In the menu, find the plugins, and
  the value all Allow. This action will have an effect only as a single site.

  Then reload the page.
  https://www.Mozilla.org/en-us/pluginCheck/

• Connection status: unknown, the dependency service or group could not start

  When I point the cursor on the network connection icon in the task bar is showing the message "Connection status: unknown, the dependency service or group could be started. But I always try to connect to the internet, if show a popup message 'The Wizard Error Message' with an error

  Component GUID: {7071ECA3-663B-4BC1-A1FA-B97F3B917C55}

  Component file: [C:\Windows\system32\connect.dll]

  Error: (0x8007277B)

  Additional information:

  Could not detect Internet connectivity
  If I always neglect the error and try to connect to the internet then system shows a message "The wizard cannot create the connection"...
  I would be grateful if someone could suggest the solution other than restart the system...
  I use windows vista as operating system...

  Hi Gattu,

  Please contact Microsoft Community.

  It would be great if you can answer the following question:

  Were there any changes made on the computer before the show?

  Follow these methods to solve the problem:

  Method 1:

  See the article and check if that helps:

  Network connection problems

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-network-connection-problems

  Method 2:

  I suggest you check out the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  I would also refer to article to reset the Internet Protocol (TCP/IP)and check if it helps.

  Method 4:

  I suggest to disable the antivirus software and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  If you are still experiencing a problem, please reply and we will be happy to help you.

• Connection status: unknown, the dependency service or group could be started. __Windows could not start the DHCP Client service on Local computer. Error 5:Access is denied.

  Good evening!

  About 2 days ago my laptop not able to connect to the internet with wireless on, a brand of red x on the computer icon in the bottom right. When I hover the mouse over this icon, it shows ' connection status: unknown, the dependency service or group could be started. " I check services and found DHCP stopped running, I tried to start it manually, it shows "Windows didn't start the DHCP Client service on Local computer." Error 5:Access is denied. "I did ' sfc/scannow' and found no errors.
  I use a laptop from my friend and it works great! So there is nothing wrong with the router but my own laptop. My laptop runs windows Vista editions Home Premium with Service Pack 2.

  Need help! Please, need to connect to the internet to go to school online. Thanks in advance for any help!

  Very respectfully,.
  Jay2010

  Hello
  Failed to start the Service on the local computer's DHCP Client (applies as well to Vista)
  http://WindowsXP.MVPs.org/DHCP.htm

  ----------------------------------------

  Start - type in the search box-> find CMD top - right on - click RUN AS ADMIN

  You can copy and paste this command, and then press enter

  netsh winsock reset catalog

  ======================

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ----------------------------------------

  Try setting all Windows services on their default values.

  Start - type in the search box-> find Services at top - right click - RUN AS ADMIN

  Vista default services
  http://www.blackviper.com/WinVista/servicecfg.htm

  ---------------------------------------

  Actually try updating your driver: (use a wire or download on another computer and transfer via)
  removable media)

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------

  You can get more help in these forums.
  http://social.technet.Microsoft.com/forums/en/category/windowsvistaitpro

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• want a list of devices supporting the wma format

  I want the devices that support the wma file format...

  Or

  want a list that does support the wma format to play...

  Finally find a document this list of specifications of all newer devices...

  http://www.BlackBerry.com/BTSC/microsites/search.do?cmd=displayKC&docType=kc&externalId=http--docsbl...

• 5.1 ESXI health status: unknown

  Hello

  I have a HP PL DL380p G8 and ESXI 5.1 with essential kit. Everything was ok, but after months, I got in the health configuration tab: unknown.

  Bit is all ok, server is running, and I don't find any hw problem.

  Why is-status unknown health?

  Thank you.

  Hello

  Restart management agents.

  How? Look here:

  Management for the restart ESXi (ESX 3i) agents

• Impossible to install Power CLI 4.0 or 5.1, although Powershell 2.0 SDK is installed?

  Hi all

  I was faced with difficulties to install Power CLI 4.0 or 5.1, even though the application of Powershell 2.0 SDK is installed, I get an error saying that Powershell is not installed, even if its installed, do not know why this problem occurs, can anyone provide some solution for me in this regard? Also please let me know if its CLI or Shell Power problem power problem, please see the image as an attachment for more details. Thanks in advance.

  Hello

  You have installed powershell 2.0 SDK not powershell 2.0. Here is the link to download powershell.

  http://support.Microsoft.com/kb/968930

  Kind regards

  Julien