WAP321 antenna pattern

Hello

A peer of mine asked what the antenna pattern is in the WAP321 and also exactly how they should be mounted.  We can't find the antenna anywhere models.  Can someone please post this in to us?  Thank you!

Hello Sir,

I think that the information you are looking for is that the WAP321 has an omnidirectional pattern. It is designed for wall mounting or ceiling. I normally get this AP on the ceiling of the best coverage. If you visit the website next on, it will give a good distribution of the WAP321 and has also some pictures of the inside of the unit. It is excellent, because open your own place could lead to the guarantee cancellation available to it.

http://www.SmallNetBuilder.com/wireless/wireless-reviews/31734-Cisco-wap321-wireless-n-selectable-band-access-point-with-PoE-reviewed

I hope that answers your question. Otherwise please respond back and I will try to get some details for you. I am currently training engineers on the new AP we must come out, so it may take me a bit to get back to you.

Thank you

Eric Moyers. : | :. : | :.

Cisco Small Business U.S. STAC Advanced Support Engineer

Expert on US-CATV wireless

CCNA, CCNA-wireless

866-606-1866 ext 601027.

Mon - Fri 09:00 - 18:00 (UTC - 05:00)

* Please rate the Post so other will know when an answer has been found.

Tags: Cisco Support

Similar Questions

  • SH dot11Radio controllers 1 | I win

    That means that each of the parameters in the output of the command "sh controllers dot11Radio 1 |" I win ' on Cisco AIR AP1142N-R?

    !

    AP1-1 #sh controllers dot11Radio 1 | I win

    Antenna: internal, Gain: authorized 8, reported 0, use 8

    AP1-1 #conf t

    Enter configuration commands, one per line.  End with CNTL/Z.

    #int AP1-1 (config)

    AP1 - 1 (config) #int dot11Radio 1

    AP1-1(config-if) #ante

    AP1-1(config-if) #antenna gain 6

    AP1-1(config-if) #end

    AP1-1 #.

    AP1-1 #sh controllers dot11Radio 1 | I win

    Antenna: internal, Gain: authorized 8, reported 0, configured 12, use 8

    AP1-1 #.

    AP1-1 #conf t

    Enter configuration commands, one per line.  End with CNTL/Z.

    AP1 - 1 (config) #int dot11Radio 1

    AP1-1(config-if) 6 #no antenna gain

    AP1-1(config-if) #end

    AP1-1 #sh controllers dot11Radio 1 | I win

    Antenna: internal, Gain: authorized 8, reported 0, use 8

    AP1-1 #conf t

    Enter configuration commands, one per line.  End with CNTL/Z.

    AP1 - 1 (config) #int dot11Radio 1

    AP1-1(config-if) #antenna gain 6

    AP1-1(config-if) #end

    AP1-1 #sh controllers dot11Radio 1 | I win

    Antenna: internal, Gain: authorized 8, reported 0, use 8

    AP1-1 #.

    Yes... Internal antennas have a gain and antenna pattern. The antenna gain control does not affect the radio. It is used for information only if you use WLSE/WCS/NCS or first.

    Sent by Cisco Support technique iPhone App

  • Colorful random Changing Patterns on iPhone 6

    Comrade Applers, of the good day

    I had a very strange experience with my iPhone... Last week, I woke up and found my iPhone looking like this... It is weird changing everywhere colorful patterns. It declined or was immersed in a liquid ever. He went just in case like that in the morning. I'm afraid it's a software problem. I tried to restore it as new and from a backup, but does not unfortunately. Someone of you have no idea what to do to fix this?

    Thank you in advance,

    MIkhail

    I'm guessing that you were not able to retrieve the device from there. Usually the appearance of strange colors and patterns on the screen is indicative of a failing LCD screen. If a factory restore does not recover the device, then it is not software. I suggest that you take a go-Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined.

  • It is possible, replace the antenna internal wifi iphone 5s?

    My iphone 32 5 s is perfect, like new, but since yesterday the anntenna internal wifi is broken. We can replace it in an apple store?

    I'm sure that the wifi antenna is broken is not a software problem.

  • Mac Book Pro, outdoor WiFi antennas work to extend wi - fi range when plugged into USB PORTS

    Outdoor WIFI antennas work if plugged into the USB port on the Mac Book Pro. If they do, those who extend range of transmission and reception wi - fi?

    Sorry, but I've never used an external USB wifi antenna but if you describe your use case a wifi Repeater/Extender can be a good option for you. https://www.repeaterstore.com/pages/WiFi-booster-Repeater-Extender-differences

    If the option is not a Repeater/Extender so will have to wait for someone who has used an external USB antenna down to.

  • Number of antennas router question?  (Several gadgets WiFi using 1 router)

    -My House is a 3 storey 5 bedrooms single family home.  There are 4 people living under his roof and each person has at least 3-4 items wireless who rely on our network domestic wi - fi.  Include wireless iPhone 2 of 6, 3 iPhone 5, 2 iMac (an older and a new one), 1 airbook, 1 MS Surface, 2 older laptops Apple (the old 1 "thick white), 2 iPads, Kindle 1-2, frame 1 photo wireless, 3 printers, wifi, 1 Sony PlayStation4 (via wifi) and much more.

    Our current router is a double (2.5 and 5) and we use them both, and we had recently a technician change the channels, so we are not in competition with the neighbors.  The router signal strength is strong in the home to most of the places.

    My question: with so many features, would be useful to have several routers with multiple antennas to accommodate this request, or made this same question?

    My current router has 3 visible external antennas.  I read that the Airport Extreme has 6 internal antennas.  I'm ready to go buy Airport Extreme, if 3 additional antennas can help, or if I can use two routers for a total of 9 antennas (if this is important).

    Our services to wide band is xfinity and we have one of their fastest options.  Not quite the 105, but about 80.

    Any suggestions?

    Several wireless routers will tend to work better than the Gothic pulpit super multi-antenna a monster looking for router.

    But they all need to be connected with the ethernet.

    Read how to get excellent wireless in your House.

    http://www.SmallNetBuilder.com/basics/wireless-basics/31576-the-best-way-to-get-ensemble-Maison-sans wire-coverage

    External antennas tend to be more effective than internal, but the actual number of antennas is easily overrated.

    Most of the antennas used on routers now are dual band... which means inside the plastic, they have sections for the two bands... If an antenna is really two.

    Our current router is a double (2.5 and 5) and we use both

    Is what model exactly? Of basic etiquette please.

    We had recently a technician change the channels, so we are not in competition with the neighbors.  The router signal strength is strong in the home to most of the places.

    It would have been correct for the first 5 minutes after the technician left the House and then totally out of place. Channel of all the equipment that surrounds you change every day, every hour... maybe every 5 min. While I don't disagree with fixing channel... others would say that it should be left on auto. You gain nothing much at all.

    If the signal strength is good over a 3-storey house, you are incredibly lucky.

    You can't effectively add routers more unless you install ethernet to provide an infrastructure for data streams.

  • Why is there suddenly a background pattern on my new page tabs instead of the default gray?

    A few days ago a patterned background suddenly appeared on my new tab page, making it very difficult to read. I have not add no matter what background and, as far as I know, I don't have any add-ons that would add a. I hate it and he returned to gray, but do not find a way to get rid of it. The only options I can find online offers to download an add-on and adding a new background, but I want to just the default gray.

    Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

    (If you use it, switch to the default theme).

    • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
    • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
    • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

    Once you get the pop-up, simply select "" boot mode safe. "

    If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    The report please come back shortly.

  • where the wifi antenna is located on current iMac?

    FAQ for USB 3 says do not locate external behind Mac hard drives because the Wi - Fi and Bluetooth antennas are located at the hinge of the screen. Where are the antennas on the iMac to 2015?

    iMac Intel 27 "EMC 2309 and disassembly 2374

    I just checked the link.  The above is an iMac 2009.  Suggest seek you more iFixit for the iMac in 2015.  I suspect that the antenna is located in the same location as the iMac 2009.

  • Anyone know where to buy an antenna for HP Pavilion a6750f wireless lan?

    I have a HP pavilion a6750f and need the wireless lan router to connect to my wireless router.

    I can't find one on the instructions from HP that came with the computer anywhere on the internet.

    Does anyone know where to find one?

    Without wire is always a challenge for me, because I have nothing wireless. It took some time to find the answers.

    Here are the specifications of your computer. It indicates that you have a USB wireless adapter card. Thus, you must locate the external connector. http://support.HP.com/us-en/document/c01619697

    Here's what the wiring may look like: http://www.gridconnect.com/uflrsma.html

    I will offer a pedestal desk with cable 2 choice of the antenna and a whip standing.

    Antenna, 12 ", swivel base: http://www.newegg.com/Product/Product.aspx?Item=N82E16833998041 & cm_re=wireless_antenna-_-33-998-041-_-Product

    Permanent w/39 antenna "cable: http://www.newegg.com/Product/Product.aspx?Item=N82E16812189159 & cm_re=wireless_antenna-_-12-189-159-_-Product "

    Hope that you spend a good day and welcome to the forums.

  • Could not find the wifi on 2006/2007 mac pro antenna cables

    I just installed an Airport card in my Mac Pro to 2006 but I can't find the antenna inside the case cables? Does anyone know where they would be located? Included with every Mac Pro models, or is mine were too old for this? I have experience with this stuff, but I don't want to spoil anything.

    Thank you

    Luke

    Update: I found them under the logic board

    Google search shows that the 2006 come with the antenna cables. By

    d-in-an-Intel-Mac-Pro/ http://meanderingpassage.com/2007/07/18/How-to-Installing-an-Airport-Extreme-car

    Then can be hidden under the logic board.

  • HP-p051-us: HP antenna

    I have a laptop that has a wifi 1 x 1 card. To install the card a2x2 this laptop has 2 antennas?

    Hi, this model is only produced with a single antenna. I would not recommend to replace WIFI antennas at home.

  • The Pavilion Elite HPE475 need an external antenna to a wireless connection?

    I just bought this machine and have had problems with a poor quality since the wireless signal. HP technical team came up with all sorts of different explanations, and I even had to send for the "repair" because one of them think that the wireless card was defective. The last time it's because he needs an antenna.

    Can someone confirm if this machine wireless card requires an antenna to be connected to the two screws Golden at the back of the computer? What is the answer, or just another diversion?

    I was not sent an antenna with the computer, it may be a mistake the part of HP. I can connect to the internet, but usually get that two bars on the signal, while my old computer has always had five bars, as do other computers on the network. The connection keeps dropping out and is extremely slow to load at times.

    Any help would be appreciated.

    Hello

    I suggest that you take a look at what came in the box.

    The low-profile wireless network card should have with an antenna and two cables with connectors from red and blue to differentiate the connection to the wireless card.

    The service center may be assuming that you already know that... All the wireless cards that come with desktop computers have a connected external antenna with cable to the wireless card.

    This image is an example. Some cards equipped with antennas that screw directly on the gold screws. Most 802.11 b/g/n card look like this.

    Please report anything that is on the label with bar code on the back of your PC, except the serial number. The HPE475 is not a complete description of a PC.

    Best regards
    ERICO

  • Satellite T130 - 10G Touchpad screen pointer gets stuck in random patterns

    Satellite T130 - 10G Touchpad screen pointer gets stuck in random patterns and laptop computer must be restarted to restore functionality
    The center of the causes of "touchpad button" toggle switch by pressing the touchpad pointer to enter a random State like two fingers to zoom.

    Sometimes, he'll be back to normal, but most of the time the computer should be put to sleep or restarted to restore functionality.

    a. I tried turn off all touch pad feature one item at a time and all, he still has some weird random State.
    (Did not try the impossible combination need $ to be interested but went to the 90% level)

    b. I tried disable the touch pad buttons offending and only using the mode tap the buttons and the problem still persist.

    c. Finally, tried bending the entire keyboard instead of pressing the buttons and it has also created the problem.

    This leads me to believe either the power key or flexion of the entire keyboard is originally is

    a. flexion of the touch pad causing the driver getting into a crazy State or require a recalibration.

    b. electrical connections causing the driver enter a crazy State or require a recalibration of bending.

    Note: I have reinstall the latest version of the driver.
    Also: American Toshiba support site that this problem exists in the notebooks of May.

    Also: The touchpad is too sensitive, which makes it very unusable!

    CAry

    Have you tried to install the operating system and check the functionality of the touchpad with the factory settings?
    Recovery image contains tested the touchpad and right and I don't think that helps the driver installation.

  • Satellite 1410-902: what is this device has a WiFi antenna?

    Hello.

    I have Toshiba S1410-902 and I want to make this computer works in wireless local area network. I am concidering buying card wifi Mini-PCI Slot, not the PCMCIA card. This is why I have a few questions:

    1. this model (s1410-902) there "build-in" antenna autour LCD? Purchase Mini-PCI wifi card can be unwise if the answer is 'no '.

    2. is there a list comatibilty miniPCI cards wifi? If yes - where? Blocks use of wifi cards of cards not compatible (such as CD-ROMs) BIOS?
    Buy the card wifi of any producer?

    Hello

    According to the specs of this device is ready WiFi and the antenna should be there. I put t know exactly where is the location of WiFi antenna, but it should be placed somewhere under the keyboard. It is very easy to remove the keyboard (fixed with three screws) and you can check if you can find the crack. There are also the antenna (black and white cables).

    Unfortunately I can't give you specific information about the compatible WiFi cards, but you can contact the Service partner in your country. I'm sure they can help you.

  • P10 - 792 already built-in WiFi antenna?

    I have Toshiba satellite P10 792 and I try to install
    Intel 2100 WiFi but I can't find the built-in antenna

    http://nl.computers.Toshiba-Europe.com/contents/Toshiba_nl/NL/others/Pricelist/Prijslijst_Nederland_3jan2005.PDF
    as they say here on page 15.

    The pc is also a hardware switch radio power.

    Hello

    Gandalf is right. There is no card on your laptop wireless network. The best solution for you is on http://eu.computers.toshiba-europe.com section Products > Options & Accessories > Communications.

    I found one for you. It's Wireless LAN Mini PCI Card (802. 11 b / g) with part number PA3300U-1MPC.

    If there is no on/off switch you can enable/disable it in many ways. If you buy one and need help let us know.

    Good bye

Maybe you are looking for