Similar Questions

• Disappointed by the new Satellite C855-1RM Ethernet speed

  Hello

  I just bought this laptop and the specifications are good, but I am VERY disappointed by the Ethernet speed is only 100meg my last laptop was 5 years old and had a 1Gig Ethernet card I spent all this money and have an Ethernet card that is, since the 1990s, as the wireless card I get only 72meg on network N which is really sh * t when I can get 144 meg with my other laptop I am very disappointed with this laptop's network card.

  I bought a Toshiba laptop computer, thinking that I would get a good laptop spec evil how I was.

  a very disappointed customer.
  (X-)

  Hello

  It is really strange that your laptop works on this path. I sure you are the first person who sends us a report about the slow speed of LAN Mr. it is really strange.

  Of course we don t know anything about your router, the internet connection, the configuration of the OS, but what you should try is to also test with another router. Who knows what is the problem.

  In the worst cases, please contact your local dealer, explain your problem and see what we can do about it.

• Ports high speed USB Equium A100

  I installed a webcam Advent (before exchanging it for a better creative). Part of the installation process involves installing a Microsoft's USB controller. (OS is Windows XP Home Edition). I uninstalled the ADVENT software when I got back to the webcam.

  Since then, I started getting messages every time I plug a USB device, on a device high-speed, requiring a port high speed.

  When I look in Device Manager, I have two sets of Bus USB controllers:

  One includes 2 standard OpenHCD USB host controllers, 2 USB, 1 support 2 USB hubs and USB printing composite devices. Their drivers are dated 2001.

  The other includes 1 class PCI USB 2.0 enhanced host controller and USB Root Hub Device 1. Their drivers are dated 2006.

  I have 4 USB ports and all seem to be using the first series of USB controllers. If I disable one of the controllers, then various USB devices stop working.

  As my laptop is only 18 months old, I would have thought that all USB ports are 2.0 version?

  How can I 'forcing' the laptop to use the second set of controllers?

  Hello

  I think that the biggest problem, it is you would waste more time to fix such a driver related issue then just entering the recovery CD and performing a recovery of your entire system.

  Perhaps the fastest way to put little life back to your ports USB 2.0 high-speed. Otherwise, I had suggested to remove all ports from the Device Manager and let windows after a restart re-install all the drivers, but before perform the reboot it would be better to manually remove all THE drivers installed previously.

  Maybe it helps, but if not he would have definitely better to perform the recustomization...

  Concerning

• HP ENVY TS m6 Sleekbook: port Ethernet HP ENVY broken

  Clip of port Ethernet of my computer broke, not the hinge plastic broke.  This is the part that leans down to cut the Ethernet cable to the computer.  If I hold the cable into the Ethernet port on my computer still receives data through it.  Let me know if you are in need of any more details that I have not thought.

  The part broke in the Middle East and must be replaced.

  Here is the Service Manual:

  Link to the manual

  See page 40. The cover is held to the frame with 2 screws inside. It is a replaceable part and is included in the kit of plastic.

  Module RJ45 cover (plastic kit) 727464-001

  HP wants to $55 for her:

  PartSurfer link to coverage of the order

  $ 5 shipped on eBay:

  http://www.eBay.com/ITM/HP-envy-TouchSmart-M6-K000-Ethernet-LAN-RJ45-cover-door-latch-727464-001-/281322149224?PT=LH_DefaultDomain_0&hash=item41801b5568

  If you have a manual with instructions for replacing it and a link to order for $5. If there is nothing else, after return and we can try to help.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Device 4 ports high speed USB 3.0 Hub useful Para PC computer

  Hola amigos

  Al enchufar el 4 ports high speed USB 3.0 Hub useful Para PC computer
  a mi PC, e me lights luz roja, pero no me works, porque me da error code 43 Windows.
  Me pide UN driver y no me lo reconoce.
  Intento find a driver there still no lo he achieved
  Alguien me can help, a packaged good
  MUCHAS gracias
  A greeting

  Hello

  You created this thread in the English version of the Microsoft Community. Please could you click on the globe icon to the world at the bottom left of the screen and then choose your preferred language. Now create your thread again.

  

  If you can't find a suitable language, please go here:

  http://support.Microsoft.com/common/international.aspx

  for other international support options.

  Thank you.

• Ports ethernet on my new Linksys E1500

  I bet dumb question, but I was not able to find an answer elsewhere, so I thought I would ask here.

  If I connect to a computer for my new E1500 via its ethernet ports will get the same speed as if I was directly connected via an ethernet cable from my modem? In short, these ports work around the appearance of the router wireless and connect directly to the modem? Ideally from a computer is located next to the router I this and only use wireless for the other computers in the House.

  Everywhere I read, I read that wireless is going to give me a slower connection that I have with my computer connected directly to the modem.

  Thank you.

  John

  Did you mean Mbps Mbps not? If Yes, then you should be good .

• ENVY Phoenix Desktop - 850-065: Add the port ethernet on the desktop

  I want to add a second ethernet port on the desktop... any recommendations, the Gathas, the various factors to consider... I seem to have three ports of extension on the PCI bus... one of them would be the target (or what)... any recommendations on ethernet brand and model to consider...

  Any wisdom on the subject will be sincerely appreciated...

  Hello

  There are many models/products of ENVY Phoenix Desktop - 850-065 series. In any case, according to your description you can use a normal PCIe 1Gig card. There are a lot of cards around, 1 port, 2 ports or more. Please make sure that there are drivers CD or at least it shows you where to find driver (from the site of the manufacturer).

  Kind regards.

• Portege Z30-A-12N with Port Replicator Port Hi-Speed USB III problems

  Hi all

  I have a big problem with my new Portege Z30-A-12N and Hi-Speed Port Replicator III.

  I connected the power, DVI, LAN, mouse and keyboard to the Port Replicator.
  Power, DVI and LAN are okay, but none will be found if I connect something to the USB Ports 2.0 or 3.0.
  No mouse, no keyboard, and no USB key.

  When I start my Portege I must enter a password after you press the power button.
  These password, I could enter with the external keyboard, but in windows, no keyboard has been found.

  If I connect the keyboard and mouse to the USB Ports of the Portege instead of Port Replicator, the two has been found.

  I ran Windows 7 Enterprise on the Portege.
  BIOS version is 3.30

  Do you have a solution for me?

  Hello

  The HI-SPEED PORT REPLICATOR III PA5116E-1PRP supports 2 x USB 2.0 and 4 x USB 3.0 ports.
  You n t special need Win 7 drivers in order to be able to use the USB ports or other interfaces such as VGA, DVI, audio, etc.

  Sound problems, make sure that the audio device has been selected in the right panel-> sound-> playback tab

  By the way: Win 7 needs USB driver 3.0 which is preinstalled when the laptop was equipped with USB 3.0 ports. My knowledge if your mobile phone does not support USB 3.0, you will be able to use the port replicator USB 3.0 ports.

  Finally and above all devices must be connected before you start the computer. The decision supported and compatible specifications: Portégé R30 - A, Tecra Z40 - A, Tecra Z50 - A, Portégé Z30-A/Z30t-A, Tecra A50 - has

• USB port high speed - not available on Tecra M1

  Hi all
  I joined my new external HARD drive to my Tecra M1 and XP says I use * not *; port USB high speed.
  Question: How can I switch to high speed USB port?

  Driver: Intel 82801DB/DBM USB 2.0 Hostcontroller - 24 D of Microsoft Version 6.1.2600.0 issued 1.6.2002

  Thanks for the reply in advance.

  See you soon,.
  Tom

  First of all, you can't 'upgrade' your internal USB port to a Highspeed USB port. This is NOT possible, but your machine must have at least 2! ports USB 2.0 capable.

  I suggest you do the following: download the latest drivers for your machine on Toshiba Driver download site, install and check if the error message appears, anywhere you´re attaching your USB 2.0 device.

  Usually one or 2 of these ports should be able to USB 2.0.

  If still, you get the same error message then come back and give some comments, then we can discuss more about.

  See you soon

• Re: Satellite P300-1AE - port SATA speed

  Hello

  I have wonderd what sata port speed is on my laptop for a possible upgrade to an ssd.
  I know that the chipset is able to use 3 Gbit/S, but I've also read that some company limited the seed to 1.5 Gbps for the extended battery life.
  Given that drives hard base provided with the laptop are 1.5 GB/S, I was wondering if it was capped too?

  Greetings
  Flufsor

  Try a scanner system such as [http://www.crucial.com/uk/systemscanner/] and see what ssd is recommended.

• I need a port Hi-Speed USB Satellite 5100 503

  Hello

  They gave me an I - pod for Christmas, but when I connect it says am I need a USB Hi-Speed port that does not have this model. Message comes up saying I need to get a Hi-Speed USB Host Controller - any advice on which would be best for employment received with gratitude.

  Thank you
  Ju

  Hello

  Your laptop is USB 1.1 only and you must search another solution for better und for faster transmission of data between laptop and Ipod.

  I agree with chain. Card PCMCIA USB 2.0 is best. You can buy in every PC shop but please buy quality and not a product without name at low cost.

  Bye and good luck!

• Connection cRio 9074 second port ethernet to another device via VISA

  I'm trying to connect a DAQ Yokogawa system to a cRio 9074 via the second ethernet port. I activated the second ethernet port of the cRio with a static IP address on the same subnet as the data acquisition system. I installed the driver NI-VISA and NOR-SERIAL on the cRio. I can compile the code on the cRio and I'm sure that the code works when I connect to the acquisition of data to a PC. I get an error on the open VISA VI.

  Am I missing something or is it not possible to connect the second ethernet port on the cRio in this way?

  Thank you

  Thank you for your response. I found the same information that you provide, but decided to give it a try.

  A few minutes ago, I was able to perform communication between the cRio 2nd access Ethernet DAQ Yokogawa. I managed to do it using the VISA controls. To communicate with the host PC, I get the information of the DAQ with the cRIO as described above and then use shared variables to publish data on the network connected through the first ethernet port.

  If anyone wants to reproduce it just to make sure that the two ethernet ports are configured with IP addresses on different subnets that are configured for TCP communication. If more details are to be simply send me a message.

  Kind regards!

• M93p - removal of connection network because of the loose port Ethernet - MT M10AA S18G00

  Hello

  A few months ago, we bought 149 new M93p devices for a hardware upgrade. In the new image, we began having a large number of errors and failures. We discovered that the network connection were down when the ethernet cable is touched or moved slightly. Initially, it was suspected that our cables were at the origin of the problem. It was quickly determined that all connection cables, with the exception of a set of very old Cat 5 cables, had the same problem. From what I can tell, it seems that the tolerances to the ethernet jack are loose or the pins are set too low.

  Everyone knows this problem or has had random loss of network connectivity? I was told that this particular model of M93p was a new race. Thanks in advance for any help!

  I had this same problem. After a month or more to work with the resolution of complaints from client Lennovo, turns out be a technical problem with the RJ45 port. The solution? -Lenovo has sent several enlarged RJ45 connector dongles. Problem solved.

• How can I configure a port Ethernet NI9792 gateway to communicate with a cRIO CAP?

  Salvation OR engineers,

  I intend to use my gateway NI9792 in the following way:

  1. a single Ethernet port for network connection. That's how I'm developing, download the software and monitor my request through my PC in my office.

  2. the other port to communicate with a cRIO device? If so, how can I do it?

  It seems to be a stupid question, but I really couldn't work this!

  Thanks in advance,

  Luiz

  Good afternoon, Luiz

  Follow the first link to guide the module which can be used and other links to the best part of bore configuration CRIO. For any question, please contact us.

  How to set my time on the NI WSN-9791 or NI 9792 gateway server?

  http://digital.NI.com/public.nsf/allkb/44FA322FAFF8D58D862575BD00591A54?OpenDocument

  Configuration and NI WSN product guide
  http://zone.NI.com/DevZone/CDA/tut/p/ID/8710

  Configure the Ports of double Ethernet on real-time controllers

  http://digital.NI.com/public.nsf/allkb/67F94BB93BCE32CF86257367006B3659?OpenDocument

  video installation and installation CRIO

  http://www.NI.com/SWF/demos/us/cRIO/outofbox/

  Automatic configuration of network for the cRIO-9073 and cRIO-9074 CompactRIO controllers

  http://digital.NI.com/public.nsf/allkb/37C790309A210A748625757000570938?OpenDocument

  Sincerely,

  Mauro Vera.

• Port Ethernet on X61s

  The ethernet on the X61s port does not moored in the ban but only when the ban.

  Is this normal? If this is not the case, how do you get the port to work while in the ban?

  bhohenstein, welcome to the forum,

  It is normal that the ethernet port on the ban is a 'place', as the VGA port and modem port. The system can only support an ethernet port. When you fasten the ethernet on the ban become active port and internal ethernet port becomes disabled. Attach your cable ethernet to the ban and everything should work fine.

  Hope this helps