WARNING: Your computer is running on battery power...

HP G72-227wm laptop
WIN 7
Pentium Dual Core CPU
64 bit OS.

Has had HD failure, could perform a recovery. Contacted HP and ordered the recovery of disk.
Drive arrived today, buy a new HD as well as a battery.
Put the new HD and the battery in the computer and disc 1 of the set of recovery disks.
Start the computer, brought windows loading, the Recovery Manager, then came...

WARNING: Your computer is running on battery. This process requires the computer to be connected on current alternative. Connect your computer to the current alternative. and then click OK to continue.

Of course the computer is plugged, I changed the Socket 3 times. When the power is disconnected there is no light next to the AC port. Supply port, then orange white light.
HP tech says it's because that its battery CHARGE.
side note - after being on the charger, the light is now constant white. Assuming that the new battery is now completely charged.* *.

I tried the following sequences with the tech:

Unplug > take out battery > connect the PC with 1 disk of all recovery > reboot > same caveat:

Unplug > out battery > pressed the power button on battery for 40 seconds > reinsert the battery > connect the PC with 1 disk of all recovery > reboot > same caveat:

After a considerable time on the phone, the tech said that my computer is obsolete and are no longer usable by HP and advised to take it to a local computer store.

It wasn't a problem before the failure of the HD. I hope someone can help.

Thank you

In fact, it was the power cord. I took it to the local Micro Center, they plugged the cord in and out we went. So for $ 38 on the recovery.

Tags: Notebooks

Similar Questions

  • Your computer is running out of available memory. Flight Simulator will now exit. You can't have enough free space on your hard drive. Run Disk Cleanup to free up space, and then try to run Flight Simulator.

    «Your computer has run out of available memory.» Flight Simulator will now exit. You can't have enough free space on your hard drive. Run Disk Cleanup to free up space, and then try to run Flight Simulator."

    I tried to adjust the size of swap file, and I have tried no pagefile.
    But I still get this error Message When I try to start FS9.

    Windows Vista Edition Home Premium 64 - bit Edition
    : AMD Athlon (TM) 9550 Quad-Core processor
    (Vivid RAM) memory: 6.00 GB

    You must specify a linker flag this option in the header of the image of fs9.exe because FS9 is a 32-bit application and use 2 GB of virtual address space.
    With the indicator largeaddressaware under your 64 bit OS, it is possible for FS9 to use up to 4 GB of address space.
    Get the SBB Explorer (http://ntcore.com/exsuite.php) open fs9.exe, header to open the file then click on 'Click here' and mark "App can handle > 2 GB addresset", save and close fs9.exe.

    As a preventive safeguard your fs9.exe before if something goes wrong.

  • Portege R500 is not running on battery power - flashing orange indicator

    I have a Porterge R500 with Windows Vista to my work.

    I was going on a trip, so I bought an extra battery.
    Before the plane everything worked fine. Both batteries worked and they were fully charged.

    After I entered the plane, out of the blue, the laptop does not start with any of the two batteries (original both of them).

    When I landed I plugged the ac plug in and it started. It indicates that the battery is charging (70% and 80% respectively), but none of them doesn't seem to work because if I remove the plug, the laptop stops.

    When it is plugged in, the led battery is a kind of blink (occasionally) but I don't understand what the problem is at all because the computer is running, I have two batteries will kind of dead at the same time, and even when they are charged according to the computer, they do not provide the power.

    Any tips?

    > After I entered the plane, out of the blue, the laptop does not start with any of the two batteries (original both of them).

    Very strange that both batteries don t work after entering in the plane.
    To be honest I m not the expert on this area, but maybe the radiation while checking the bags and personal items likely to affect the batteries.

    However, the fact is that laptop does not work with batteries. I recommend you to buy another battery.

  • WHAT YOUR COMPUTER CAN RUN IF YOU HAVE BASIC NOTE 3.0?

    I have a Windows Vista Ultimate 32-bit, and it has a base score of 3.0. What to do to run?

    Hello

    All that will take place on this system... the score is only an approximation of the ability to run programs.
    Most of the programs except for intense games will run. The manufacturer usually warn or indicate the minimum
    material and Windows are necessary for the performance of their programs.

    In Vista maximizing memory to 4 GB will help. Upgrading the video card and even the hard drive
    fastest disc can influence the score. Yet if can using a newer and faster set
    system also. Finally, the upgrade of components becomes unproductive.

    =============================================================

    Be careful that a lot of these programs and services really needs to run and often remove some
    contributes little to the speed of the machine while making the less friendly machine to use.

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.

    Method 1 using Windows Defender will tell you more specific information about each program.

    ---------------------------------------------

    It's a little more complicated that you might have a few running services that you can do without
    However its really best to leave the default value of things only as strange services can get down
    the road.

    Also some programs add services that might not really need to start automatically.

    To view these compare those to start - type in the search box-> find Services just a click right dessu
    RUN AS ADMIN thereon to those of the default in Vista as listed here by BlackViper. Ignore and
    who are on the disabled (which do not run) or manual (which work only on request) - for all
    Automatic or automatic delayed start you can post them here if you need help to decide
    If you need to run. Some of these can be assigned to the judgment and manual so that the program calling
    can run them as needed.

    BlackViper made also some improvements to default windows services but I wouldn't
    These unless you really understand the full meaning of change a default service. So use
    It's like a tool to compare.

    Windows Services - list by default.
    http://www.blackviper.com/WinVista/servicecfg.htm

    -----------------------------------------------------------

    Here are some tools that will allow in the future that you gain experience even if the above
    Methods will do what you have to do for now.

    Window Watcher - free - do you know what is running on your computer? Maybe not. The
    Window Watcher says it all, reporting of any window created by running programs, if
    the window is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    Process Explorer - free - find out what are the files, registry keys and other objects processes have
    Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
    you who owns each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured so that it starts automatically when your system
    boots and you login. Autoruns shows you the full list of registry and file locations where
    applications can configure Auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx
    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Windows Defender - tools - software explore - check here

    ===========================================

    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
    first.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    Hope these helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Touchpad problem - running on battery power, does not work when it is connected.

    Laptop Toshiba with Vista. The Synaptics touch pad battery power works fine. When it is plugged in, it freezes.  Disconnect the power supply and back to the battery and everything is fine.  That's happened?  How can I get the touchpad to work in both modes of power?

    I played with power options, and there is nothing specific to the touchpad.  Setting the power of USB has no effect either. This laptop (Toshiba A505 series) is up-to-date with all service packs, etc.

    Hi mravitz,

    You need to maybe uninstall and reinstall the Synaptics drivers installed on the system.

    Uninstall and reinstall the Synaptics drivers.

    a. Click Start, point to settings and then click Control Panel.

    b. double-click system click on hardware and then click Device Manager.

    c. expand the device, and then double-click the Synaptics driver.

    d. click on the driver tab and click on uninstall

    e. restart the computer and check

    Check out the link:

    Update drivers: recommended links

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer

  • Satellite P100-473: I can run without battery & power sector

    Hello

    I would like to know if I unplugg my battery of my laptop if I use it plugged in.

    Thank you

    Of course, you can run Notepad without the battery and only connected to the main power supply.
    You don't have to be afraid. Will not damage the laptop.
    I use my laptop without the battery. Why? Because it does not more ;) It s too old.

  • laptop not running on battery power, does not work on current alternative

    Mobile works only with the battery will not work when the power supply is connected, it only works on battery when the battery is empty, says to plug in the power cord support

    will be appreciated

    If the device is powered by a transformer wall ac, its probably the cause, they burn out

    All the time. Replace it with the same intensity that is indicated on the device (input/output)

    power...

  • Audio/video out of sync on netflix - when the laptop is running on battery power

    Hello

    When you watch netflix on my asus laptop with windows 8, the image and the sound is out of sync. It takes a few minutes before its noticeable, and it is progressively worse if I continue to watch.

    I noticed that this never happens if the pc is connected to a charger. If I connect the charger after starting to watch netflix without, the video will go faster until it compensates the difference accumulated upward between the sound and the image.

    It started to happen a few times a few months ago, now its everytime I watch netflix. I him have not lived with other video services or streaming - youtube works perfectly fine, as well as a site of Danish online streaming that I use sometimes.

    Is there anyone who has any idea what is the cause? I find it very strange, even if its only slightly annoying. Any input would be greatly appreciated!

    I apologize in advance for any grammar errors - English is not my first language.

    Best regards

    Alice

    It's worth a try.  I suspect that it could be due to energy saving features.  There are options within the configuration to be able to change the way the browser handles 'javascript timer frequency' during the execution of a battery, what could be the cause.  But quite honestly, I recommend trying the application instead of using the Web site.  If it works, it means that you get maintain power efficiency, more enforcement provides a more enhanced Netflix as the site experience, quite a bit more quickly too.

  • WARNING: Your computer may be infected.  Call 866-955-6104

    This happened:

    Then, I was unable to close the page, or Chrome, I've tried several times to quit smoking.  I finally forced to shut down the entire system.  It was on my iMac.  I took this screenshot before that I forced its closure.  I am now on my laptop, I was wondering what I need to do.  Do I need to take steps to remove a virus or malware on my iMac?  Most of my searches on Google for this problem referenced PC only.  I'm confused!

    It's a hoax, ignore it. Do NOT call the number.

  • switch power automatically when you change or battery power management

    in windows xp, he was smart enough to understand that when I was on the battery, it should run in powersaver and when I plugged in, it should work on high performance.

    I don't see a setting to make windows 7 this and must ensure that I click on power options and select the schema each time.

    This is made more annoying because the quick menu shows only balanced + powersaver or balanced + high performance. so I have to click 3 or 4 times just to change the power mode.

    frustrating that it does not by itself when she used to. I do not understand why common sense as this functionality has been removed. also limiting the CPU doesn't seem to work at all, as it shows 1.6 ghz instead of 800 mhz when the powersaver, and this feature worked fine in windows XP.

    If these two things have been fixed, I find windows 7 usable.

    Hello

    Welcome to the Microsoft Answers site!

    In Windows 7, we have three parameters of plan of different power, you can choose according to your convenience. You can also customize power management and also to create a new power plan according to your need.

    To create a new power plan:

    1. open the power supply Options by clicking the Start button, click Control Panel, clicking system and security, and then clicking Power Options.

    2. in the left pane, click create a power plan.

    3. on the create a power plan page, select the plan that is closest to the type of plan you want to create.

    4. in the Plan name box, enter a name for the plan, such as "give a presentation", and then click Next.

    5. on the change settings for the plan page, choose the display settings and the sleep that you want to use when your computer is running on battery and when it is plugged.

    To keep your screen on during presentations

    ·         Change the turn off the display of setting to never on the battery and plugged in.

    To keep your laptop awake during presentations

    ·         Change the setting to put the computer to sleep forever on battery and plugged in.

    6. click on create.

    If you are using a portable computer, your plan appears under Plans shown on the battery meter. If you are using a desktop computer, your plan appears under Preferred Plans of. The plan that you based your new plan is moved and appears under additional plans

    For more details on the parameters of plan to follow the links below

    Power plans: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/power-plans-frequently-asked-questions

    Change, create, or delete a power plan (scheme)

    http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

    Unleash the power of your laptop

    http://Windows.Microsoft.com/en-us/Windows7/unleash-the-power-of-your-laptop

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • "Detection of Java on your computer" runs forever

    Hello

    Win 7 32-bit / IE installation 9 / Clean - wiped the hard drive and began to charge

    Installed upgrading Java 7 10 (1.7.0_10 - b18, according to the Java Control Panel applet) starting from java.com, without any error.

    When I go into the Installation verification page, 'Detection of Java on your computer' applet runs forever.

    Removing Java, reinstalled, restarted the browser and the computer several times, same result.

    He tried another PC, also Win 7 32 bit / IE9 / Clean install - same result.

    What is going on?

    Thank you

    Published by: 979978 on 4 January 2013 09:35

    Check the proxy settings, I suspect this is the problem.
    It is often the case when a class file cannot be loaded.

    http://docs.Oracle.com/javase/7/docs/TechNotes/guides/deployment/deployment-guide/JCP.html#General scroll down to "use a proxy server".

    If problems are still visible, view the Console output. This turns on the Advanced Settings tab.
    http://docs.Oracle.com/javase/7/docs/TechNotes/guides/deployment/deployment-guide/JCP.html#advanced
    Console for more information: http://docs.oracle.com/javase/7/docs/technotes/guides/deployment/deployment-guide/console.html

    Less likely, but possible, are the AVs, firewalls, routers, etc.

    -Roger

  • Mid-2010 MBP loses battery power while you sleep

    Hi everyone, I have replaced my MBP unibody mid-2010 with a spare battery and the laptop battery lost its battery power very quickly, during normal use and while you sleep. I contacted the manufacturer and they sent me a different battery, and the same problems continue to occur, so I suspect that something is wrong with my computer at this point.

    Above all, I had a second replacement battery installed when I wiped my computer clean and made a new fresh installation of El Capitan and the problem persists. The drain of the battery during sleep is even worse, it goes 100% to near depletion in a few hours.

    I have read several threads on these issues but can't seem to find the one that matches my computer behavior or specific settings. I'd love some help troubleshooting this! Can someone kindly walk through diagnostics on this for me please? FYI I already have:

    (1) the drive repaired/checked permissions

    (2) reset the NVRAM

    (3) reset SMC

    Thank you all and happy new year!

    First, not all replacement batteries are at the height for use on portable Macs what OWC at macsales.com has batteries that are. The other thing is in what regards the battery life is what you do. As these effects for how long you can run on battery power only.  Ranging from light to moderate to heavy use. If you have things like an anti virus program on the MBP. It will run in the background. And to a certain extent, even in standby mode. That will exhaust the battery. Mac do not need anti virus programs. The amount of programs running in the background is all to one degree or another effect battery life.

  • Windows 2000 update stops at "checking if your computer has the latest version of Windows Update software for use with the site... »

    When I try to update Windows 2000 by using Windows Update, web site crashes the message

    'Check if your computer has the latest version of Windows Update software for use with this web site... The Web site uses ActiveX controls to determine which version of the software your computer is running. "If you see an ActiveX warning, make sure that the control is digitally signed by Microsoft before installing it or allowing him to run.

    Y at - it a fix for this problem?

    This problem may occur in Windows 2000, Windows 2000 SP1 and Windows 2000 SP2 on computers. These versions are no longer compatible with the Windows Update Web site. To resolve this problem, you need to install the latest Service Pack for Windows 2000 computers. Follow the link below to access the article and get with the latest Service Pack.

    http://support.Microsoft.com/kb/260910

    Bobby

  • Firefox 19 may allow installation of software from web sites, or must there always save the files on your computer first

    Firefox 19 may allow installation of software from web sites, or must there always save the files on your computer first

    You must save the files on your computer before running them.

    In this way your security software can scan the file to see if it is safe.

  • Since the installation of Kaspersky Internet Security my computer is running very slowly.

    My computer is running very slowly since the installation of Kaspersky Internet Security... Can we have too much security, causing a slow computer?

    My old security provider (Hauri) ran well which allows a fast download...

    I am an elderly person with no knowledge of these things and need advice... Thank you

    original title: slow computer

    Contact the Kaspersky Support.

    Partners:

    Help! My computer is slow!
    http://miekiemoes.blogspot.com/2008/02/help-my-computer-is-slow.html

    List of troubleshooting for a slow computer
    http://www.bleepingcomputer.com/forums/topic44694.html

    What to do if your computer is running slowly
    http://www.malwareremoval.com/tutorials/runningslowly.php

Maybe you are looking for

  • HP Envy Phoenix 810-160: hard drive crash?

    Hello My desktop computer has been acting lately. Before start time allows to be very fast, but now is the time to start take much more time. Then when I want to start the computer, it looks like not detected media presence and try to start on the ne

  • You will have to plug a pavilion and a MS213 to a Sony HD TV.

    We are having to connect our Sony HDTV with our Pavilion in a single MS213.  There is no video output on our flag.  Please help and thank you.

  • Error control ActiveX 9.0 CVI - 143

    I already searched the forum but none of the suggestions help me; the problem is easy to replicate, so I hope someone could help me... I have compiled and created a version for the example provided with cvi 9.0 \userint\activex\webbrowser. This examp

  • fixed point conversion

    How do I know how LabVIEW manages type conversions and type cast to point fixed. In particular, I have two problems: (1) assume I want to convert an integer signed 32-bit to a point fixed with the function "-fixed-point." Of course this conversion in

  • Costs on the sale of old computers

    If you are selling a used computer and remove the hard drive and do not provide the disks provided with the system operating systems would you be legally bound to take over the costs of the case sticker?