Warrenty info -: STR-DH520

Similar Questions

• STR-DH520 margin adding video HDMI

  My HTPC sends 1920 x 1080 video via HDMI to the Sony APR: STR-DH520.

  Who then sends video to my Samsung Smart TV also capable of 1920 x 1080 via HDMI.

  However, the AVR adds a margin to the image such that there is one inch

  unused screen on the left and right and one half inch of unused screen up and down.

  When I connect the HDMI directly to the HTPC video card TV, there is no margin.

  The Windows 7 video driver knows he's talking to the Sony APR.

  I checked the resolution presented by the HTPC and the settings of the TV screen.

  How can I get the Sony APR to fill the screen?

  Hi Codetonic,

  What you are experiencing is called scanning. The only adjustment to change will turn the PASS THRU feature it so the TV does not see additional CEC via the HDMI connection protocols.

  If this not reslove the issue, are there any changes of the Samsung Smart TV to the mapping of pixels? These settings are usually in the settings screen called display area. If it's characteristic is present in the TV menu mark an attempt to reduce it by-1 or - 2 or increases by + 1 or + 2.

  If my post answered your question, please mark it as an "acceptable Solution".

• STR-DH520 no sound HDMI

  Hello

  I recently bought a STR-DH520 and I'm trying to get audio through HDMI to my P8H77 - I motherboard on my computer, but so far without success.

  If I connect the computer directly to my TV or the sound projector is read from this device. If I connect it to the amp I get no sound from the speakers any audio playback device I select on the computer. However, if I select the projector as a device for reading on the computer I hear the projector (for HDMI passthrough works)

  I have selected the right speaker configuration and have performed a calibration, so I can check that the speakers are working.

  An update, I tried with another computer, still no luck.

• STR-DH520 component video

  I just moved into a house where they have a line consisting of the closet to the tv area. I have a Sony Bravia HD TV which has been great to work for a few years. I don't want to pull a HDMI cable in the tube where the sons of component are so I went and bought a Sony STF-DH520 a / audiovisual receiver. I hang a DVD and a Comcast HDMI in HDMI input on the receiver ports and plug a HDMI to the TV output. Works very well.

  I then try to use the Monitor Out on the receiver and connect a component video (red, blue, green) and I get no video on the TV. Then I try just the (composite) video cable to the video output on the back of the av receiver and no luck there.

  Did I miss something until I take this thing back to the store? Page 21 of the manual shows that I can have a HDMI or Component out to my TV output. It should work.
  http://store.Sony.com/wcsstore/SonyStyl... 248878.PDF

  Thanks for any help,
  Tom

  from page 22 in your manual
  "Entry of video signals to HDMI IN may
  only be transmitted via the HDMI TV OUTPUT
  Jack. Video input signals cannot be
  exit through the VIDEO OUT jacks or
  MONITOR OUT taken. »
  I think it is the way that most all receivers work. I would run the HDMI.

• Trouble with 5 speaker set to str dh520

  I have the speakers whirled for correct connections, but could not get the right configuration to save the system.

  Hello Ann,.
  Welcome to the community of Sony.

  You can refer to the # 30 of the manual page to select speaker model according to the speaker system you use.
  You can also adjust the size and the distance of the speakers connected to this unit by following the steps mentioned in the chapter "MENU SPEAKER" on page # 57.

  Please mark it as "acceptable Solution" If you find this information useful.

  Kind regards
  Colby

• STR-DH520 - pass through

  Why my camera starts when I turn on my my TV to the receiver input. I have my ps3 connected to the receiver, then the receiver to the TV. I don't want the receiver all the time. But when I turn on the TV to the hdmi input, my receiver turns on. I have so I have to turn off the receiver and then continue 5000mAh mode.

  Rrangel,

  If you just reset your receiver and then you have to turn ON HDMI Pass Through.  It can also be beneficial for reference manual STRDH520 to understand what settings are available and how to use them to achieve your desired results.

  Settings HDMI (page 60)

  Control for HDMI [CTRL. HDMI] ON BY DEFAULT - CHANGE to OFF

  Passage of Signal HDMI in [COL. THRU] OFF BY DEFAULT-CHANGE on

• subwoofer

  A subwoofer passive can be used with receiver 7.1 STR-DH520? I have seen a few articles online. He also takes a subwoofer to be installed on the receiver or just connect?

  Thank you for your post and welcome to the forum.

  The sub out on a STR-DH520 is line level only so so that you can run a subwoofer passive you need between a mono amplifier. If you can find an inexpensive stereo amplifier that can be filled may be a way forward. However, any amount you plan on spending for the purchase of an additional amplifier is probably better spent to run an active sub will not only easier to configure it probably also sound better.

• Through HDMI equilizer

  Does anyone know of a type graphic equilizer passage which will connect via HDMI input / output?

  I have a STR-DH520 receiver and it has only options for bass and treble adjustments.

  Thanks in advance for any clarification. Bob

  Hello Bob,

  EQ must be connected to the loop to monitor Strip on an AV receiver to operate. The current range of receivers Sony doesn't have a tape monitor loop. For this reason, it is not possible to connect an equalizer the current module of Sony's AV receivers.

  If my post answered your question, please mark it as an "accepted Solution".

• Help Rex Exp

  Im trying to find an exp reg which will match everything between 2 string matches... The two strings themselves are not a problem, but just between ... I can't use the indicator/m multiline or can I? I've seen using [\s\S], but this doesn't seem to work for me? I never thought of this... So, this is the beginning of what Im after... and it works fine...

  Info = str.match / (%! PS-Adobe-3\.0/);

  This is the end game...

  Info = str.match (/%%EndComments/);

  The only two work and the game is not null...

  Is the closest I've been able to manage myself...

  Info = str.match / (%! PS-Adobe-3\.0[\s\n\r]+.+/);

  But I'll be shot if I can find a way to get the last part to repeat? Is it easy or do I look of string instead methods... Oh btw can you get the offsets of a match exp? Mood swings or what?

  Edit... UM has played a bit longer and now I have it but slooowly is until a bad exp and is there a more specific method to do the same thing...

  Info = str.match / (%! PS-Adobe-3\.0(.+[\s\n\r]+) {0}, %%EndComments/); Get a little happier now...

  Would this be something like this work for you, Mark?

  var str="!PS-Adobe-3.0This is the text I want%EndComments";
  alert(str.match(/Adobe-3.0[^%]*/).toString().substr(9));
  

  Or even this...

  var str="!PS-Adobe-3.0This is the text I want%EndComments!\r\r\r";
  str +="PS-Adobe-3.0This is the second lot of text I want%EndComments";
  var parts = str.match(/Adobe-3.0(.*?)%EndComments/g);
  for(var a=0;a		   

• Open photo of Photos in the Preview app? Need info GPS and maps!

  Hello!

  I write trip review and to see where my photo was taken (in the maps application), and what is digital gps coordinates for each image.

  Search on google - go, I got that via this pic of opening in 'Preview' app.

  But - I have all my pic in Photos app (automatically imported from my iphone to macbook pro Mac OS sierra).

  so, I can export all the photos, I need, in a specific folder and then, from there, open it in the finder and get my info, of course - but looks silly, I think.

  as I already have this pich in Photos - photo can I somehow open directly from Photos Preview app?

  or obtain the gps position open, where this picture is taken in cards programm (not this small window, which is in the Photos, but wide, Maps application) / and obtain the coordinates of the gps directly via the Photos app?

  Thanks in advance.

  Use the media browser in preview - in the open window on the left down - media = == > photos == > Photos

  or even more appropriate is to buy external editors for extension of Photos in the App store ($0.99) and you can view the pictures in preview when using the hotos

  Photo editing Photos for Mac Extensions

  LN

• How to convert pictures from iPhoto?  I need general info and advice.  My library is huge (95 GB).  I am running OSX El Capitan 10.11.6 on iMac.

  How to convert pictures from iPhoto?  I need general info and advice.  I saw the help info but I am very nervous to take on this project, as my library is huge (95GB), organized in several events and albums.  My library is saved (Time Machine SimpleSave HD).  I am running OSX El Capitan 10.11.6 on iMac.

  Have you seen this document?   Updated Photos for OS X - Apple iPhoto support

  https://support.Apple.com/en-GB/HT204655

  Is your iPhoto Library Library on your system drive in the pictures folder? And you have a lot of free space on your system drive? The migration will need additional temporary storage.

  Then drag the iPhoto library icon pictures open to create a new library of Photos of her.

  Your albums appear unchanged in the Photos.  Events will appear as additional albums, because the pictures has no events.  See this link: How Photos handles content and metadata for iPhoto and Aperture - Apple Support

• Siri on mac has the wrong person as "My Info".

  Just finished macOS installation of Sierra and Siri works very well except that he thinks I'm my daughter. When I ask "who am I?", he gets it wrong and shows the map of my daughter. When I ask about me, it shows my card (even marked as "self") as if I was just another contact.

  I checked in the Contacts app and I'm correctly identified on 'my profile', nothing special on the daughter card.

  I can't find a way to change the card associated with 'my info' as you can in settings of Siri on iOS.

  Are you connected to iCloud with only your Apple ID?

• Battery and Wifi info not displayed after updating IOS 10

  After upgrading to IOS 10 I have more information at the top of my home screen line. He comes to the line with WiFi, battery, and other info. I see it if I open an application, only some however. This status being lost, it is difficult to look at the life of the battery.

  How do I turn it back on?

  If it cannot be enabled by the user, then Apple needs to bring him back.

  David

  Hello! You can activate the in your settings. Go to battery and select on the percentage. The other options that are displayed on this bar, you can also turn on in general settings. Make sure that the WIFI is enabled in the settings. I had this happen before. After trying your settings, if you still do not see the bar with all the status restart the device. If it still does not work, you can try to recover the device on iTunes. The last resort would be to call the Apple support. I'll try to fix it in the settings that the lines may be busy.

• iCal 'Get Info' is grey for the blue calendar; Other calendars are very good. Model name: iMac model identifier: iMac9, 1

  iCal 'Get Info' is grey for the blue calendar; The other color calendars are very good.

  I deleted the file 'com.apple.iCal.plist '... No luck.

  Please notify. Thank you, Roger
  

  
  

  
  

  Presentation of the material:

  Model name: iMac

  Model ID: iMac9, 1

  Processor name: Intel Core 2 Duo

  Processor speed: of 2.66 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 6 MB

  Memory: 4 GB

  Bus speed: 1.07 GHz

  Boot ROM version: IM91.008D.B08

  Version of the SCM (System): 1.44f0

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode

• change info student in the school of Apple Manager

  After completing the Setup Wizard in the Manager of the school, I stayed with 468 students and 31 instructors. In the models that I used to download via SFTP information (using Filezilla) I've assigned each student in the class by giving them a grade, the class id and so strong. Each class had several teachers.

  But all that information is lost when I downloaded models. Each class has now that only one instructor, but there is no students in classes. I thought the classes would be assigned automatically based on the tags that the students were given. It goes same for instructors, I manually add instructors in classes, even if I had already done so.

  If I'm looking for some students, however, then I see that the level of appropriate lubricant have been applied. Grade level, class ID, class name, it is apparently not the same. So I have to reassign the correct students to their classes. I convert all IDs students manual, because I can't change whatever it is, when all is related to the SFTP post. Finally, I plugged the students for their correct classes.

  Then I noticed that the wrong password policy has been selected for each student. Although localization at the level each student must have a 4 digit PIN, they now 8 combination of number of letters. And no way to change for the most part, I have to manually change 4-digit. Right?

  Also this manual madness applies also to change the class by student news? I can't change the class to an entire class id?

  When I change an info students or teachers in their 'Individuals' account information, (not correct namespelling) I also delete the old account of their class and have to fill the empty space with up-to-date profile information again.

  Please someone tell me that it is really easy and I've just forgotten a filtering information / in bulk / dynamics of change in the option tables all in school manager!

  So far, I like the promise of the ASM, but I was frustrated by it's steep learning curve (download SFTP problems) and the scarcity in the options.

  TLDR / my real question: is there an option in ASM to filter multiple people, to change the settings in bulk (such as the method of connection setting to 4 digits for one class at a time) and to ensure that when the news about an individual has changed these changes are applied to all tables of data within ASM?

  In response to my own question: I discovered that it is possible to change the password policy and other info to groups of students selected in ASM. I was really happy that I not rehook to SFTP or manually edit appleids 468 students. In looking at 'individuals', you can sort by rank or role, and make a selection of students by using the shift or command options as you normally would. You cannot drag to select well. After you have selected, you can change various settings for your selected group. After this, you can print the new password for your selected group instructions. Nice.