Watch cable TV

Similar Questions

• Configuration of the XBR-65x850c channels - I put the type of signal to the 'cable', but he always comes back to the "antenna".

  I have the TV signal by cable from the TV directly to the output - without cable box.

  Under 'Configuration of the strings' / 'Type of Signal' I choose "cable."

  The works of TV and I watch cable TV.

  I'll be back later in the day and the parameter 'Type of Signal' has changed to 'antenna' and I can see is more channels.

  I change it back and it works until the next time I try to watch TV when I find that it has changed again.

  Someone knows how to keep permanently the setting on "cable"?

  Thank you!

  This problem has been fixed with a recent update.

• Satellite A200 - interfacing with Sky HD box, via the i.Link on my laptop.

  Satellite A200-1VP

  I'm trying to find away to check my laptop DVD, my disk drive hard SKY HD boxes, so I can copy the recorded programs from the HDD to DVD discs from the sky.

  But don't have a HDMI interface port, only the AVI & output VGA, which does not have a digital input, only the other signal output as we understand it.

  So I thought to using the port i.Link (IEEE 1394-a), as it was designed to send DVD date camcorder to the laptop to be registered? wouldn't the camcorder DVD send a digital signal, and if this is the case, shouldn't it work this way? Is there a device or cable on the market that I could use to make the possible interface to do this?

  I have watched cable, through the Internet but can't seem to find a HDMI / i.Link (IEEE 1394-a) lacking USB i.Link (IEEE 1394-a), but seem to be under the impression that the USB 2 is unable to deliver the date at a fast enough speed to make it work...

  Any ideas would help thanks.

  Why don't you talk with your local dealer and experts for this?
  If you do not have matching port on your laptop, you need another external solution.

  Check http://www.pinnaclesys.com/PublicSite/uk/Home/ and all products here.

• STR DN1040 HDMI HDCP issues

  I have a recurring issue with my new receiver STR-DN1040. It works fine for a while and then it stops negotiating devices on my TV HDCP. For example, my PS3 will display a black screen when I turn it on. My TiVo Series 3 displays a screen saying that there is a negotiating HDCP error trying to watch cable channels. The only solution I found is to unplug the receiver from the wall and plug it in again - then it immediately starts working again.

  It produces at least a couple of times a week, and it's extremely frustrating. Looking at a few discussions on here and other websites this is not an uncommon problem.

  I tried tweaking about all the settings that I can think of nothing doesn't. One who seems to have made the most difference is turning off the fast display of the HDMI, but it might just be a coincidence.

  Here's what I connected through my receiver (all with HDMI):

  Apple TV

  Xbox 360

  Wii U

  PlayStation 3

  TiVo Series 3

  Sony BDP-S360 Blu Ray

  My TV is a Sony KDL-46EX710.

  My HDMI outputs receiver / A + B the TV (I have a set of HDMI input upwards for games and one for the TV-movie).

  As you can tell, I love my Sony AV products. I wish just that this receiver has worked reliably for me.

  Is this a known problem and it's something that will be fixed in a future update? I really want to love this receiver (and most of the time I do - when it works!), but every time I turn on the TV and get a HDCP error, I want to throw it out the window.

  Ideas or ideas here would be appreciated.

  Thank you!

  High-bandwidth Digital Content Protection (HDCP) is a system of protection against copying in order to eliminate the ability to capture digital content from the source to the screen. It is designed to protect digital signals when using a DVI Interface (Digital Video) and High-Definition Multimedia Interface (HDMI).

• Dell XPS on MS XP running several windows to include station media TV and internet games offers a pixelated display gradually and freezes

  Dell XPS on MS XP running several windows to include station media TV and internet games offers a pixelated display gradually and freezes. restart clears but reproduces

  I love my Dell and use media station to watch cable TV while playing games on the internet (pogo.com) sometimes I play solitaire spider OEM.  I think that, especially in the afternoon, my image of the desktop will get pixelated (small hyphens in contrasting colors) gradually fill in top to bottom.  Initially, I thought this might be the steganography, but found no references.  then I noticed that the pixelation in contrasting colors began to appear on the screen of the media station into strips about 6-8 rows of red, green and blue and pulsed in time for audio.  do not have audio video storage but this started to happen when Comcast went digital, so there may be a link?  spoke and troubleshoot-done with the line paid expert who suggested Speedfan as a diagnosis for my GPU graphics processing unit.  When I reboot, everything is fine so it happens with increasing frequency.

  Here is a link to the Dell site where you can get a manual that has a few general cleaning instructions as... eliminate dust, etc.
  http://support.Dell.com/support/downloads/index.aspx?c=us&CS=19&l=en&s=DHS

  Here is a link to some general purpose cleaning of ideas to make sure your system is found good circulation:

  http://www.bleepingcomputer.com/tutorials/tutorial118.html

  Even if your system is physically disconnected from the power supply and clean, if you can remove your slot NVIDIA card and reinsert the card safely in the same dwelling, which will ensure that you don't have a loose connection.  Which may require a screwdriver, so if you're not uncomfortable with it, maybe you can find someone to help you.

  Your display NVIDIA GeForce 7300 driver has also passed HIM.

  Your msinfo32/video info says that currently, you have this:

  6.14.12.6658 driver version (it's NVIDIA version 266.58)

  The current version of the driver for the GeForce 7300 is 270.61

  The best way to reinstall the NVIDIA software is to visit NVIDIA support web page and let your system and recommend the best software for your system or that you get the right version of the software on their web page and download the latest package of video driver for your system software and install it yourself.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the link to the support page NVIDIA for the scan:

  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

  Let online to take a look at your video system scanner them and see what he suggests for drivers and consider their analysis if they offer a new pilot.

  Download and install the recommended driver and reboot your system and check the version of the driver installed again.

  If you post the msinfo32/video info once again, we can help you to ensure that the new driver is installed.

  Is not not a audio/videophile, I'm not sure if your codecs required to make day or no MS maybe someone else can help you with this part, but should your video driver update.

• No available boot device - PowerEdge T110 II

  Hello

  My server will not go beyond this screen.  I tried starting and choosing F2 and F11, but always return to the screen.  And it takes forever to get there too.

  No found boot disk?  Should not be able to find one of the hard drives?  Or he tells me that the integrated sata controller is dead?  The server is 2 hours away, so I can't watch cable.

  Here are the specs of the drive: 331-2392: PERC S100 (Embedded SATA Softw are RAID) supports 2 hard drives - RAID 0

  What Miss me?

  Thank you

  Bruce

  Hello

  Bruce in the LMC

  No found boot disk?  Should not be able to find one of the hard drives?  Or he tells me that the integrated sata controller is dead?  The server is 2 hours away, so I can't watch cable.

  All the message tells us is that he could not find a bootable media. The system crossed the boot priority list and did not find whatever it is bootable. I would suggest starting in the BIOS OF THE controller and checking the status of the RAID array.

  Thank you

• Driver for Motorola Set-Top Box QIP6416 to Windows 7

  I would like to take the a/v out of Verizon Set Top Box (QIP6416-2) and use Windows Media Player to watch cable (FIOS) TV using the Line In input for a card CREATIVE Audigy.

  Thank you

  I would like to take the a/v out of Verizon Set Top Box (QIP6416-2) and use Windows Media Player to watch cable (FIOS) TV using the Line In input for a card CREATIVE Audigy.

  Thank you

  Art

  You may be able to find the necessary help in the link provided below.

  http://www.Verizon.com/support/Residential/TV/fiostv/Receivers/User+guides/User+guides.htm#.

  Set up and install.

  http://www.Verizon.com/support/residential/TV/Setup.htm

  Quick Guide to Verizon

  http://www.Verizon.com/support/residential/QuickGuides/index.htm

  If you wait long enough on the installation and install the page, you will get a popup offering help via a chat.

• How to find on what progams share the tuner tv on my computer

  I have a 600with touchsmart a tuner tv with windows xp.  How I found on which programs share my tv tuner?

  How can I connect my cable to the computer to watch cable.  I have an hp touchsmart 600 desktop computer with windows xp

• How I output in 1080 p instead of 1080i TV

  Salvation;

  I have looked over the presets that came with my trial version of Premiere pro and do not see an output for 1080 p with the exception of the Blue Ray parameter, and I don't mean to have this to blue ray, but to watch cable TV.  He's here and I just lack?

  Thank you

  1080 p would be gradual. If you are using the current version of first (e.g.: CC2014 8.2), you can also click the Source of Match. Hope this screenshot helps (example of the 1080p25).

  

• KDF-55wf655 video mode still displayed on the screen

  I have a problem with our kdf-50wf655 where the video mode is always displayed on the screen.  Watching cable TV, it displays a list box "video 7' in the upper left corner. We had this TV for 10 years and this question popped up just for a reason any.

  I tried to watch some of the tv settings and turn them off and who does not.  I also went through other video modes and it does the same thing.  Does anyone else have this problem and fix?

  Hi mcpcp99,

  Welcome to the community of Sony!

  Try resetting the TV to its default settings. You can follow the steps below:

  1 turn on the TV. While holding down the reset on the remote control.

  2. press the POWER button on the TV. (The TV puts off, then power on.)

  3. release the RESET button.

  NOTE: The TV reset Resets all your custom default factory settings.

  Thank you!

  Jerome

  If my post answered your question, please mark it as "accept as a Solution.

• How can I go to watch Apple TV watching television (cable) without changing the remotes?

  How can I go to watch Apple TV watching television (cable) without changing the remotes?

  You can't do that.  The feature that turns on the TV and the entrance to tha ATV is nice, but is not able to remember what the original setting was and go back.

• Satellite U500 - How can I watch the TV without cable antenna

  I just bought my new Toshiba u500 and is fairly new to all this.

  I was watching TV on my laptop, but with an aerial cable... once I got it out the picture disappeared...

  Can someone explain how I can watch TV withou any cables?

  How long is my battery life is supposed to last me if I use the laptop for chech just my email and surf the net?

  I don't know if you know how it works exactly, but if you do not have enough knowledge about all this I recommend you consult your dealer and ask him the same question. I'm sure he'll explain how it works exactly.

  You may want to use antenna DVB - T, but the dealer is the right address for you. They have all the info you need.

• Satellite L300 - can't watch TV using the connection cable cable with Win 7

  Hello

  I have a problem.
  I can't watch movies in my Satellite L300 to my cable TV.

  Hello

  I don't know how you connected the laptop to TV, but generally you may connect the TV to the laptop using an HDMI cable or an s-video cable.
  Of course, this is only possible if one of these ports is supported by the laptop.

  Then, you must use the FN + F5 key combination to switch to the external video output.

• My daughter has an air of ipad and iphone 6 mounted on a tripod. She would like to use his phone to photograph/video while you watch on his ipad (in real time)... is it possible? If so, what adapter or cable is needed?

  My daughter has an air of ipad and iphone 6 mounted on a tripod. She would like to use his phone to photograph/video while you watch on his ipad (in real time)... is it possible? If so, what adapters or cables are needed?

  Hello!

  Unfortunately, this feature is only available with the GoPro cameras.

  And Yes, if all cables already existing for these purposes, it would be kind of a pain to take pictures and do not shake the camera accidentally. Maybe, VSCO camera makers will make such feature in some time in the future. This idea is excellent and innovative. Maybe even Apple will listen to users and make their new iOS 10.

• I am trying to configure my laptop so I can watch a show on my TV with an HDMI cable. It doesn, t work

  I have a Pavilion dv7 laptop.  Windows 7 64-bit.  I am watching a video from my laptop to my tv using a HDMI cable and can't seem to get that issue.  Is there a key to seting it upward?

  Hello

  1. first thing I would check: the cable itself, which is its HDMI version, you may need 1.3 or higher? What is your TV (brand, model)?

  2 with the right cable, try the following steps

  (a) turn off the television and laptop

  ends (b) connecting cable

  (c) turn on the TV menu TV allows to accept PC signals (laptop)

  (d) turn on the laptop, go to display you should see TWO screens (1 and 2), select TV

  Kind regards