Watts speaker

On the HP 1010 p7 I used speakers who had subwoofer because my monitor has no internalspeakers.  Total Watts is 200.  Is it too.  My monitor would turns blue, and I could not log on.  I have to unplug and wait a whike.  The monitor is HP 2311 x.

Maggie

The power of the speakers maybe isn't the problem.  I suspect it's the proximity to the monitor, it is what is causing the monitor to act weird.  Try to move the speakers further away from the screen.

Tags: HP Desktops

Similar Questions

  • Satellite L650 - 1 k 2 - How many watts are the speakers?

    I got the l650 1 k 2 with "Toshiba Bass Enhanced Sound System puts Dolby® Audio advanced" but how many watts are the speakers?

    Hi mate

    There is no details about watt speaker.
    I found just the notice that it's stereo speakers

  • {a} speaker on a clean install, XPS 410 - Spware Possible problems / Malware *.

    I recently did a clean install on my XPS 410 due to blue screen problems when you set up a wireless network in my house.  Everything seemed to go well--is something that I did several times on multiple computers, this one included.  But this time my speaker system (Dell A525 30 Watt stereo speakers with subwoofer 2.1) obviously caused a problem.  I have the drivers for all my devices on my external hard drive, and they are labeled.  The driver for the loaded speaker system but was still yellow in Device Manager.  I also kept getting the message directly after loading windows: "entry point procedure LocalizeString is not found in the dynamic library STLang.dll."  I could click OK and continue. Slowly.  I looked on the net and find it is quite frequent - everyone seems to have a way to heal, but there are always strings, and none of them work in all cases.  One thing all agreed terms of sound equipment.  And it was the only yellow marked item, I had.  In fact, he showed in device as Manager: "SigmaTel High Definition Audio CODEC".

    I became exasperated to the point I disconnected the sound system and removed from the room!  I have attached an old Dell speaker system and it worked for a few sounds and then stopped.  Finally, I removed the original system, as shown just on top, using Add/Remove programs.  After the message has disappeared so I am sure it was the problem.  Then, when I couldn't others in work, I decided to restore to the point just before I removed this system 'SigmaTel '.  Fake!  Of course, he came back as did the error message and I have been unable to get these old speakers installed no matter how hard I tried!  (I don't have the driver for that precisely, but the required system to come with something that didn't work).  Again, I tried to uninstall the SigmaTel program but it wouldn't let me!  It would take me to a Web site that was of no use to me.

    In its current form, I spilled the system restore point and the SigmaTel is gone as is the error message.  But I have no system of his work on my 410.

    Any ideas out there?  I was a member of this community almost since the first day and have had excellent results in the past.  I bet that someone knows how to help me.  (Anyone remember Denny Denham?  I know he's not there to help more. Always wondered what happened to him.)

    Thanks in advance.  Bessie

    It is up to you, but analysts on sites like SpywareInfoForums, SpywareHammer, Bleeping Computer, Geeks to go, The technical support Forumsand MalwareRemoval Forums, in contrast to support tech OEM and other forums, are trained to stay with you to the resolution and to remove their tools (assuming that yields of poster for tracking) so that they do not remain on the system to help you "trouble." They probably perform you analyses to one or two who will spot (hopefully) corresponding to this registry entry. After that, they will give you a registry file that you can download and double-click to merge with your registry. This should solve the problem. We have used to do this free individual support here, but Dell abandoned a year ago.

    I wish you luck for any route you choose to take.

    Kind regards

    Bugbatter

  • speaker to ear iPhone 6 seems very small

    speaker to ear iPhone 6 seems very small

    Hey Chief Nir.

    From what you describe, the sound of the receiver seems low for you. Let's go over some troubleshooting to get smooth it.

    Start by taking a look at your receiver if something blocks or if it needs to be cleaned. Read the article below for more details and additional details to help solve this problem for you.

    If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone
    https://support.Apple.com/en-us/HT203800

    Take care!

  • Does anyone else have a problem with the left speaker is much lower than the right?

    Any source that I use the left speaker is much lower than the left. If I put my finger on the right I can feel the pressure of air pushed but not by the left. Is it an iPhone defective 7?

    Hello, TopDog16!

    Welcome to congratulations on getting a new iPhone and Apple support communities 7.  From what I see in your post, you have any questions on the stereo speakers in your new iPhone.  I would be happy to help you with that!

    Indeed, your iPhone has holes on both right and left sides on the lower edge (on each side of the connector of the Lightning).  The holes on the right are only speaker on this edge of the phone, however.  The other speaker in the pair is at the top of the phone, where the cut is, just above the screen.  Check here to see if sound comes out.

    This page has a large diagram of the iPhone of 7 speakers (in the section entitled "Buttons and external connectors"): iPhone 7 - technical specifications

    Have a great rest of your week!

  • Apple Watch can play music through its built-in speaker?

    I do a decent amount of race and the latter I ran with my phone and just play music on the built-in speaker. It's nice to not have to helmet bouncing around and it feels safer because you can hear the traffic and so on.

    When first announced, I was under the impression, given that a built-in speakerphone, you'd be able to play the music stored on the watch through said pregnant. I haven't seen all the posts about this and now think that it is false.

    So that you can?

    Obviously, the quality and the volume would be questionable, but still, I feel that it would be nice to have the option. Thank you!

    Hello

    It is not possible to play music from the playlist synchronized via the loudspeaker on Apple Watch.

    On the contrary, your watch can be coupled with a Bluetooth headset to listen to music when you run.

    More information:

    Listen to music on your Apple Watch - Apple Support

    Use the Bluetooth with your Apple Watch - Apple Support Accessories

  • I dropped the cream cheese in my speaker

    I dropped my phone down speaker in my bagel and penetrated my speaker of cream cheese and now the sound is muffled and I can barely hear at full volume.

    There is no way to clean that. Try to introduce something to remove the cheese would only push it more later in, or if you've tried some type of liquid, it would be still worse. I suggest make you an appointment at the Apple store nearest Genius Bar, explain the situation and they can explain your options. It would be more than likely one out-of-warranty replacement. Good luck.

  • Mini Mac, microphone, speaker?

    The Mac mini has a speaker and microphone, so it begs to play your playlist?

    It has a very small internal speaker. It generates very low quality and is really intended to alert sounds.

    It doesn't have a microphone.

    You can get a USB mic and plug the PC speakers with 3.5 mm.

    You can also use a headset with a single 3.5 mm plug that has headphones and a microphone lke who came with iPhones before the iPhone 7

    You can also get a USB webcam, since those who have microphones built-in

  • iOS 10 no sound from the speaker of the ear or EarPods

    After update of iOS 10 (in 6 s iPhone and 5s) I have a problem then to make or receive calls. Most of the time it is no sound from the speaker of the ear or EarPods and I have to press the speaker during calls to listening. To get back what I have my iPhone and open it again. This seems to happen after that I used once the EarPods.

    Be aware that I have consume EarPods in 90% of my calls and iOS 9 I had no problem at all.

    Hello Billy78GR,

    Thank you for using communities of Apple Support. It is my understanding that you met the receiver and headphone audio problems after update to iOS 10. I know that it is extremely important to be able to hear others during calls. I'm happy to help you to get this resolved with you.

    First of all, I recommend you restart. This can solve many unexpected behaviours. Follow the steps below to restart.

    1. Press and hold the sleep/wake button until the Red slider appears.
    2. Drag the slider to turn off your device completely off.
    3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

    Restart your iPhone, iPad or iPod touch

    As you use the headphones on most of your calls, I recommend checking and removal of dust or debris from the helmet. If the problem persists, please refer to the additional steps in the link below.
    If you do not hear a person, a call or a voice message or if the sound is not clear on your iPhone

    Have a great day!

  • Why is there no applications that will automatically speak incoming iMessages or SMS?

    For any activity that see a person check iMessage or SMS during the travel (car, bike, etc.) and the obvious fact that users don't care what laws are passed (they can and will text while driving)

    You would think there would be a wide variety of applications in the app store that would speak your messages for you. I know of one, called drivesafe.ly who don't/does that, but can't stand Apple.

    Now, I know, Apple does not open upward is iMessage API for third-party applications, and I know that you can try a few things to that accessibility - however these aren't real replacements for an application that would simply speak a text Message you receive. From what I hear, Apple will allow, in iOS10, third-party applications interact with iMessage, I hope for one you'd see more of these types of applications. You wouldn't think that would be a proactive feature and save lives, that apple might want to push for development? I know that it would be safer and even more convenient.

    What are your thoughts?

    Siri read your new messages.

  • Why am I not able to speak to Siri in two languages?

    Things are different in my mother tongue.

    Siri can speak one language at a time if you want to change the language, you can make that throw the settings > general > siri

  • No Volume control on the speaker Airplay of Apple TV app?

    Apple TV is set to the output on the AirPort Express.

    You can control the Volume of airport exit holding the Center button on the remote airport until the menu is displayed at the top, in selecting the speakers tab, scrolling to the airport, then using left/right button that moves the green light and makes the audio output to the optical connector upper or lower the airport.

    However the sound volume bar does not respond when you do exactly the same thing in the Apple TV iOS remote control application.

    Y at - it a trick to make react?

    Is this a bug or a coding error?

    Logically, the application should be able to control all the menus/submenus of the Apple TV.

    Apple TV output to a specified volume. The volume is controlled by your TV, speaker bar, amplifier, etc. Siri distance includes an IR remote, which can usually be trained to control the volume of the TV, but the iOS app can only output IR I don't have an airport, but probably it outputs to a volume determined in the same way, and you control the volume either at the level of the amp/speaker, or to the source if you play from iTunes.

    TT2

  • iTunes will not play with Bluetooth speaker

    I use iTunes on a system Windows 10 12.4.3.1. My computer is associated with a high fidelity of iLuv speaker. Audio is not iTunes plays through the speaker very well, but iTunes wants to play through my laptop speakers. I disabled them even, but again, it won't play via Bluetooth speaker. I also changed my reading settings in Live Audio iTunes, which seemed to work for others, but it doesn't change anything for me.

    What bit system you have?

    64, maybe try to download this - iTunes 12.1.3 for Windows (64-bit-for older video cards)

    32, maybe try to download this - Download iTunes 12.1.3 for Windows (32 bit)

  • I need to be in touch with an agent who speaks french. Please this is my imail address important * @ *.

    I need to be in touch with an agent who speaks french. Please it's important my address imail - * @ *.

    < personal information under the direction of the host >

    There is no agent of Apple here. It's just a Forum user to only. Try the Apple Support here: official Apple Support

  • iPhone 6 s the ear speaker volume is low

    iPhone 6 s the ear speaker volume is low, I turned the volume all the way to the top and there is still no improvement and the volume of the phone's normal when on a call by speaker and earpods. Problem volume level is only known when using the earphone.

    Hello

    Follow the steps here:

    If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone - Apple Support

Maybe you are looking for

  • My address bar doesn't have AutoComplete. Windows XP and it worked but not now. How to start the AutoComplete?

    My computer crashed and it was restored. I am running Windows XP and I do not re - install Firefox Aurora after the computer has been restored with the new motherboard and HDs. All my software works, but the AutoComplete is not the case. Firefox reme

  • Office Pro 8610: auto reply will not work

    Help, please. Ive read all the possible solutions on this post about auto answer does not, have to press on accept in order to receive faxes. I tried everything, check the fax line, changing all the distinctive rings, stop and disconnect all then res

  • Bad script ScriptLoader messages

    The message below is part of a series that I have to close it before that Firefox opens. All started about 4 days ago. I think it has something to do with Evernote. I was watching on my phone and I captured a Web page to save into Evernote. The Evern

  • 2 updates repeatedly offered via Windows update

    Original title: latest Windows updates I have updates Windows automatically happening and for the past 5 days there are 2 updates to install and I'm sure they are the same 2 every night. It's as if the computer has entered a loop with these updates.

  • PIX support IPsec over UDP or TCP

    Series 500 firewall Cisco PIX support IPsec over UDP or TCP so that the secure tunnel VPN IPsec can go through the PAT and NAT. If so, how to configure it? THX Concerning Jeffrey