We can connect to two cubes using smart view of even excellent tab?

Similar Questions

• I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.

  I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.  I tried all of the obvious solutions.  Windows 7

  Original title: unidentified network

  Hello

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you are having problems with the unidentified network error message.

  Perform the steps from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-connection-shows-that-it-is-connected-but/52e60042-2666-4EAF-80be-193b26db10be

  Answer to us if you are having problems with the unidentified network or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Error when using Smart View install link in the workspace

  Hi all

  We recently definitely use Smart View 11.1.2.5 instead of 11.1.2.1.

  So role the file to our users, we must update the link in the workspace.  I did it, copy the new .exe and file version.xml to our server that hosts the workspace, in the path of file Oracle/Middleware/EPMSystem11R1/common/epmstatic/wspace/SmartView.  I then removed the old files.  Now when I connect to HFM and go to the link, after a period of a few minutes, I get the error "Cannot find a version of the runtime to run this application."

  I tried to restart all of the services, a dead-end.

  No one knows what to do to fix this error?

  Thank you in advance.

  Brian

  Reply to my own post.

  This is a known defect in Smart View 11.1.2.5.  HFM Workspace do not recognize as valid an installation link.

  Thank you.

• connection of two monitor using hdmi cables

  hp Hello Forum

  I want to connect two monitors using two hdmi cables, hdmi to dvi cable and an external graphics card.  The problem is, I don't know where to start? (what to connect to what?) I can do if I have easy to follow instructions or illustrations would be gr8, thanks in advance :-)

  Sorry... I just noticed that we have discussed your configuration before. May I ask if the previously suggested configuration did not work? What prompted the purchase of the USB graphic card?

  Display USB adapters are designed mainly for the non-graphiquement intense... Adding screens for things like spreadsheets, documents word, daytrading, presentations, etc. The display adapter using USB can cause a lower performance than using the native chart AMD Radeon HD 7570 card. I suggest that you avoid using the USB graphic card, if possible. Depending on your selection of available cables, if suggests using one of the following configurations;

  (1) computer > HDMI cable > monitor and the computer > cable DVI > monitor (recommended)

  or

  (2) computer > HDMI cable > monitor and the computer > DVI-HDMI cable > monitor

• The smartwatch can connect with two phones

  I am looking to buy Sony smartwatch, and since I have two android phones, I was wondering if it would be able to view the notifications from two phones?

  See you soon,.

  Dimitar

  Smart Watch can not be connected to two phones at the same time. So it will not be able to view notifications from two phones.

  What are your thoughts on this forum? Let us know by making this short film survey.

• Can my XC-605 can connect to two external monitor.

  Hey, guys. Do you know if XC-605 can connect to the two monitor. One VGA and one DVI. I thank very you much in advance!

  If your model has a discrete video card installed, then the VGA port has been blocked with a plastic cover. The VGA port is not usable when add it on the graphics card is in place because the edge is off.

• Unable to connect to the server with Smart View essbase

  Hello
  
  I'm having trobules connection Smart View to make ad hoc analyses, but perfectly I could establish a connection with planning and navigate web forms in Excel.
  
  The address that I use to connect to Essbase is: http:// < server >: 19000/aps/SmartView and planning url is http:// < server >: 19000/HyperionPlanning/SmartView
  
  I have already used these URLS in another server with the version 11.1.2 but now that I'm trying to connect to a server with v11.1.1.3 I can't. Whenever I connect to planning to see forms a prompt appears with the message saying that "I connect to a server with an earlier version" but I could work perfectly with the forms. When I connect to essbase, I can see the apps but I can't just do any analysis adhoc.
  
  Could someone has an idea of what could happen?
  
  Thanks in advance
  
  Published by: user9143843 on January 13, 2011 04:58

  SmartView 11.1.2 is not compatible with Essbase 11.1.1.3.

  Reference - http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html

  HTH-
  Jasmine.

• Anyone using Smart View 9.3.1 with Hyperion Version 11.1.2?

  We have improved our environment, planning, Essbase, Shared Services EAS Hyperion 9.3.1 and 11.1.2 financial information however, is it possible to always use SmartView 9.3.1 to connect to the new version of essbase and workspace. We use the connection essbase for ad hoc reporting and the connection of the workspace to run the reports that must be run on several excellent tabs (can not export from the workspace to several tabs).
  
  I wanted to check first before you try, because I have not found anything which has addressed this particular issue on the forums.

  I don't think that you checked the answer as being correct.

  HTH-
  Jasmine.

• Cannot submit data using Smart View 11.1.2

  Hi all
  
  I have a 11.1.2 job planning environment windows 2008 (x 64) and I installed just the Smart View through the workspace. I am able to connect to planning and ad hoc analysis Essbase DataForms. But I am not able to present data. Every time I come into some number and say present, it gives off that cells with #MISSING. It's as if we're doing an update. This is the case in the Planning and Essbase.
  
  Suggestions, if there is something I have missed? It cannot be a bug because it's one of the most basic things that Smart View must do.
  
  See you soon,.
  Abhishek

  No, can't submit sample-based either. Looks like a compatibility issue with Office 2002. In the Support Matrix, 2003 and 2007 only one is mentioned.

  See you soon,.
  Abhishek

• Can not see the image using Team Viewer 6 CCTV

  During office hours, I want to CCTV monitor (using my laptop to Windows 7 64-bit) installed in my house. I got to know that the viewer of the team is best freeware for remote access. I've accessed my PC at home (installed XP on it) using Team Viewer 6. instead of the view a gray window appears whenever I try to look at the camera, but I could works perfectly unless by CCTV PC at home

  Hello

  Check the following settings:

  1. optimisation of the quality:

  a. in the menu bar of TeamViewer

  b. click on display

  c. Select quality

  d. click on optimize quality

  2 turn on the feature of "driver":

  a. click the icon on the remote computer's system tray,

  b. click Options,

  c. click 'Show advanced options', scroll down to "advanced network settings" and click on the button install to 'install the monitor driver.

  Adding to the above suggestion, install the latest version of TeamViewer and check if that helps.

• the Smart view diff and Excel add-in

  Hi can someone tell me what would be diffrenace between smartview and excel addin
  explain

  http://looksmarterthanyouare2.blogspot.com/2008/10/Excel-add-in-vs-smart-view-931_11.html

• I'm getting "connection timed out" when I try to connect to a specific Web site. I can connect to the site using Internet Explorer. Help?

  As suggested by Firefox, I've cleared my history and cache. Also, I downloaded and run one of the programs malicious applications recommended Firefox. I also deleted Firefox my firewall and then added it back as suggested by Firefox. I have no problem accessing the site using Internet Explorer.

  HTTPS Everywhere makes it easy for you to move site to a secure connection. It's something that you can yourself on the sites where you are displaying sensitive information, so it automates this for you, but I think that it is not essential.

  If you love the comfort, the extension has a function to create your own rules, as described on https://www.eff.org/https-everywhere/rulesets. It sounds a little complicated...

• My GT5481E can connect to my TV using HDMI?

  SDMI PORT ON IT 7550331

  RE: Windows Vista model GT5481E S/N CGM75 610 00085

  This model is available to connect to the TV with an HDMI cable? Or how to connect to them.
  I wouldn't find HDMI outport on the rear panel of the pc or no possibility to add it to change?
  Help, please.
  Thank you
  Eugene Kim
  [email protected]

  Starting from this reference here (and assuming that it is the correct computer), no, you will not be able to use the default HDMI.
  If your TV allows, you can use VGA and audio cable separated, as described in the links above.

• Since the installation of El Capitan, I can't connect to shared on the network computers. I can see them, but when I try to connect it says connection failed. I can connect directly in Parallels using a shortcut.

  I can't connect to shared network computers. Not a problem already before the update to OS X El Capitan. The computers appear in the Finder under heading Shared, but when I try to connect it says connection failed. However, under Parallels Windows 7 I can properly connect via the shortcut or mapped drive. Any suggestions?

  El Capitan is a bit fussy about safety. Try

  Finder > go > connect to server...

  and enter the address of the server explicitly in the dialog box that appears.

  C.

• can connect you two computers so you can see other people screen

  to be able to see the thing on other computers

  Yes, remote assistance. If you and the person you want to show your screen to have msn, there is a button to request remote assistance tab actions in a message window, it would be the easiest method to use. If not, you can just use it (it should already be on your computer), but the receiving person will activate in the properties of the system, and when you start, you will need to send the key to get.

  The msn is much easier.

  Note that this is a thing in a way, you will see their screen or vice versa, you don't see each other screen at the same time. Because that would be stupid. You would see their screen and on their screen... is your screen!