Similar Questions

• Getting error: cannot run on the development web server configured

  I installed Visual studio 2012 and IIS 7 on Windows 7 Ultimate version. I get the error message 'Cannot run on the development Web server configured' and 'Impossible to run IIS Express' when I tried to run a web application from VS2012. If anyone knows how to fix it please tell me.

  Hello

  It is not a community forum for VS.

  Try the Visual Studio Forums

  Visual Studio development category:
  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Don

• Web Server Configuration tool fails

  I remove Coldfusion MX 6.1 "works" of Windows XP Professional and installed MX 7. Met an error when installing on the wall of fire problems possible preventing complete installation.
  
  I went to the Web Server Configuration tool to configure IIS. When I clicked on the Add button, I get the following message:
  Could not connect to JRun/ColdFusion servers on host localhost. Possible causes: server not - running performer and fire wall blocking JNDI - restriction in security.properties host.
  
  I have disabled virus protection and Firewall window also well off the coast.
  
  I've reconfigured the jrun.xml and ColdFusion runs on its own server, but I wanted it on IIS for some tests.
  
  Thanks in advance.
  
  Mike
  
  

  > Yes is all three. I ran the two instructions that you gave me and this is the result.

  Finally, we could be something. Follow the link bpurcell.org that I have given above and scroll down to the bottom. You will see a post about Windows XP SP2 and socks.

  Apparently, there's a limit to how many socks open authorized on the operating systems such as Windows XP SP2 and Windows 2003 SP1. If we believe that, then your problem is caused by Windows XP. The default behavior of the wsconfig tool is to analyze all ports in the range of 2900-3000, exceeding of Windows XP SP socks limited.

  A solution would be to run wsconfig with a limited number of ports scanned. Follow these steps and then on the command line:

  C:\CFusionMX7\runtime\jre\bin\java.exe-DWSConfig.PortScanStartPort=2920-DWSConfig.PortScanCount=1-jar C:\CFusionMX7\runtime\lib\wsconfig.jar

• The Web server configuration

  I have Labview 2011 SP1 running under windows XP. We have Microsoft Silverlight 4.1.10329.0 installed by our COMPUTER organization. In the Labview Project Explorer, under Tools-> Options-> Web server application server server Web is grayed out.

  Is there something special I need to update or purchase to activate the Web application server.

  Hi Joseph_Loo

  Have you tried to repair or reinstall LabVIEW?

  Kind regards

• Siebel web server configuration error

  Hello
  I have install siebel 8.2.2 web server (windows server 2012, java7).
  When I run the .bat config on modify port dialog box I get java.lang.StringIndexOutOfBoundsException

  I don't understand where is the problem.
  Can you suggest me something?

  Thank you

  Hello

  Please confirm the version of Siebel that you use. Windows Server 2012 is supported with 8.2.2.3 from, check the Doc ID 1492194.1 to find information on platforms certified for Siebel.

  Thank you

  WSiebel

• Configure the web server and application server deployment hangs in 11.1.2.2

  Hi all

  I want to install Hyperion 11.1.2.2 with Oracle 11.2.0.1 database. I installed all the modules successfully.

  At configuration time, I set up the Foundation Hyperion Essbase, planning and reporting with success.

  But the question, when try to configure HFM and FDM EMP Configurator crashes, in HFM Web server configuration and application Web of FDM configure FDM.

  I installed IIS, Oracle 32-bit and 64-bit, the Clients, and also configured DCOM.

  What comments can you do on this point, if any body faced the same question.

  See you soon,.

  Mady

  Hi all

  We reinstalled hyperion again

  then it works fine.

  Kind regards

  Mady

• How to find the type of Web server is configured for use with ColdFusion

  Hello

  Where can I check to see what kind of server that ColdFusion is configured to run currently? I have an existing CF installation 9.0.1, which I'll be removing and installing CF 9.0.2. During the instalation of the 9.0.2 version I would need to specify the server to use - Server ColdFusion / Apache / IIS etc. My question is, where I see in CF 9.0.1 existing to understand the server that is currently being used.

  Thank you!

  You can use the Web Server Configuration tool. Assuming you are on Windows, the path to start is generally

  Start-online programs-online Adobe-ColdFusion 9 online-online Configuratiol tool for the Web server

  In fact, you can use this tool to add or remove web servers.

• Problem with the server configuration tool Web + APSB07-02

  Recently, I applied the updated connector in APSB07-02. Today, I tried to create a connector to my new cluster CF and get the following error when you use the Web server configuration tool:
  
  "The JRun servers on host 127.0.0.1 must be upgraded to use this version of the Web Server Configuration tool"
  
  FC 7.0.2HF1
  JRun 4 Updater 6
  W2K3 SP1
  
  Is date referring too?

  The article for the hotfix has been updated. Step 7 Installing multiserver in the article also says to the jrun-hotfix - 65311.jar and save in {jrun_root} \servers\lib. This can cause problems if there are already fixes in the {jrun_root} \servers\lib. Step 7 will be changed to have the jrun-hotfix - 65311.jar put in another directory, then change the java.class.path in the {jrun_root}\bin\jvm.config file so that the jar file is at the front of the class resembles the following:}

  Java.class.Path={Path-to-jar}/JRun-Hotfix-65311.jar,{application. Home} / Servers/lib...

• Not possible to activate the scripts on the Web server

  Hello

  I would like to create a page .html for Web with a bit of scripting ESP included - Services because now I understand just this:

  <% for (i=0; i<3; i++) {
    ...some text...
   } %>

  According to this document NOR, I first need to enable scripting:

  To use the script with a Web service, you must enable the feature on the Web of LabVIEW server. In LabVIEW, select the script on the Web Server: Configuration page in the dialog box Options to enable the use of scripts on the Web server.

  I activated the Web server and it works OK. But there is nothing called "Scripting" in the configuration page - and the script is executed (the code is just printed in the form of simple text).

  Anyone know how to activate the ESP script?

  Version: LV 2012.

  Best regards, Jan

  Hi Jan,

  In fact, you use the ESP file instead of a static HTML file.  For example, if we had the static html file:

  Hello world

  This file can be located at something like /MyWebService/HelloWorld.html.

  If I then do something like have a page to say "Hello, Jan" or "Hello, Mark" I could use ESP.  In this case, your code might look like:

  <>

  var xname = form ['name'];

  %>

  Hello, @@xname

  The URL of such a web method is perhaps something like jan/MyWebService/Hellovar/Jan where Jan string literal passed to the terminal of a web method that can resemble

  

  In this example, the string "Jan" is passed to the terminal of the value of the VI.  What implementation of the Web method in the spec to build his signature might look like in /Hellovar /: value.

  So, back to your original question.  You embed not ESP breast and the HTML document.  Instead, you embed HTML inside a document of ESP and the rendering of the document in HTML format when accessing the URL of the Web method.  While the paper you mentioned earlier has an example project in that you can use as a reference

• missing components of the web-based configuration

  Hi all

  I have two controllers cRIO-9074 on my network, both with the OR-RIO 4.0 software installed.  When I open a web browser to display utilities 'OR configuration & monitoring Web-based', a cRIO not show four of the eight tools on the left side of the interface of Silverlight.  Missing the Console Remote File Browser, Web Server Configuration and installed the Configuration Tools.

  I would like for the user of this system be able to download its data files, every day or so using the remote file browser, so this feature would be nice to have. Any ideas?

  Kind regards

  Marvin Perry, DRESSED

  
  

• Turn off NI Application Web Server

  Does anyone know how to turn off the NI Application Web Server.  It's hammering away on a port I need for an application.  I opened up the .ini.default file and considered changing the default port (which is 8080).  Would that result in issues?  What about preventing it from starting up in bootup. I don't see it in my msconfig file.

  You can change the default port by using the Configuration Page of the Web server safely. Read the white paper in the section flags 'Web Services created by LabVIEW' to the location: http://www.ni.com/white-paper/12402/en/

  The white paper says http://: 5353 for the Web server configuration page, but the next Help topic now says http://: 3582 to access the interface: http://zone.ni.com/reference/en-XX/help/371361L-01/lvhowto/ws_enable_web_server/

  Then on the tab of the Web Server Configuration, you can set the port:

  

• Cannot start web server on the executable file

  Hello

  We have a problem with a Web server - we cannot get to initialize the help of nodes of property or the ini on a compiled executable file.

  As part of our application, we are starting the Web server to publish a status page to be read remotely. This works very well when we are running in the development environment and also when we run an executable a PC with installed development environment, however it will not boot on a PC with just the runtime installed.

  I have attached some of the code that functionally does exactly the same thing in our main application. I used this as my Tester code and built in an exe while trying a lot of different things to fix.

  When executing:

  • The code will sit in the while loop until I press stop.
  • Web server: Active Server = FALSE
  • Out error = ERROR No.

  

  In the full application the while loop waits a few seconds before throw an error if the server is not started. In this example, I can let the loop running for awhile without leave. Normally, the boot time is<50ms when="">

  It's the ini file to the executable file:

  [WebTest]
  server.app.propertiesEnabled = True
  Server.OLE.Enabled = True
  server.tcp.serviceName = "My Server computer/VI"
  server.vi.propertiesEnabled = True
  WebServer.Enabled = True
  WebServer.TcpAccess = "' + * '"
  WebServer.ViAccess = "' + * '"
  DebugServerEnabled = False
  DebugServerWaitOnLaunch = False

  And it is the Web server configuration file:

  ErrorLog "$LVSERVER_ROOT/logs/error.log".
  LogLevel 3
  The default server name
  DocumentRoot "$LVSERVER_ROOT /... /.. '. "/ www".
  Listen 8000
  ThreadLimit 10
  TypesConfig "$LVSERVER_ROOT/mime.types»
  DirectoryIndex index.html
  LoadModulePath "$LVSERVER_ROOT/modules '" $LVSERVER_ROOT/LVModules "" $LVSERVER_ROOT /... ".
  LoadModule LVAuth lvauthmodule
  LoadModule LVSnapshot lvsnapshotmodule
  LoadModule LVRFP lvrfpmodule
  LoadModule dir libdirModule
  LoadModule copy libcopyModule

  AddHandler LVAuthHandler
  AddHandler LVSnapshotHandler .snap
  AddHandler LVRFPHandler

  AddHandler dirHandler
  AddHandler copyHandler

  "CustomLog"$LVSERVER_ROOT/logs/access.log"'%%u %t \"%r\ hour' % > s %b.
  KeepAlive on
  KeepAliveTimeout 60
  Timeout 60

  As can side note, anyone tell me where the $LVSERVER_ROOT variable is configured?

  I tried the things:

  • Copy a new default configuration file before the entry into force
  • Writing a predefined file (encoded) before initializing config
  • Definition to root before initializing directory (it actually generates an error because the server is not active...)
  • Set WebServer.Active = TRUE several times inside the while loop
  • Toggle the web server in the ini file

  System:

  • LabVIEW 2010
  • PC with Windows 7 running

  Thanks for any help, because it makes me crazy slow!

  Ben

  Hi Marco, thanks for the reply.

  I have this guide was reviewed previously and had done all that he but a small section who gave me a hint of something to try and I have solved my problem, so thank you!

  If anyone is interested, here's the problem:

  The directive DocumentRoot folder in the config must exist or the Web server cannot be started. So basically, make sure that the file points to a folder that exists!

  This leaves two small annoying problems if - you can't see if the file exists (and then create it) before starting the Web server, because you can not query the path to the folder without the Web server running.

  AND

  You can't really define the configuration programmatically file as parameters from the file are responsible for execution, not on the start Web server.

  The result of this is that the config file and the folder root document should be created (and corresponding of course...) when the executable is built / installed on the system. Not a massive headache, but it means do not forget to put things in the build specification and do not rely on software to do the job at startup

• Activation of scripts on the Web server

  I found this, but cannot locate Scripting on the Web Server: Configuration page

  Activation of scripts on the Web server

  To use the script with a Web service, you must enable the feature on the Web of LabVIEW server. In LabVIEW, select the script on the Web Server: Configuration page in the dialog box Options to enable the use of scripts on the Web server.

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7738

  It seems that scripting is enabled automatically.

• Officejet Pro 8000 A809n Web server password

  I'm trying to change the settings for my HP Officejet Pro 8000 A809n network and the Web server responds with a prompt that displays "the 192.168.1.250:80 of server requires a user name and password.  The server said: printer HP Networking @. "He then a box of user name and password.  I tried admin, Admin, administrator and all the combos for username and password including drafts, but without success.  I followed the instructions to reset the printer several times and had to connect to the USB to re-setup wireless network, but whenever I connect to the web server, it wants a username and password that I've not been given a chance to put?

  I tried 3 different computers, 2 different routers to see if that helped but no luck.

  Computer details:

  HP laptop Pavilion dv6 Windows 7 Home Premium 64-bit

  Dell Windows Vista Business 32-bit Edition desktop reference

  Dell Latitude Laptop Windows Vista Home Premium 32-bit

  Routers:

  Firmware for D - link DI-524 revision D 4.03

  Linksys WRT150N

  Any ideas?

  Thank you!

  David

  Decided to try a more reset using the following instructions:
  1. hold down the power button / stop
  2. press the wireless button twice
  3. press on button cancel three times
  4. release the power button / stop.

  Attached to an ethernet cable and waited for router assign the address. Used the web server configuration wireless SUCCESS!

• Install on laptop 11.1.2.1 get web server error

  I want to install Hyperion Essbase 11.1.2.1 on my laptop I have windowns 7 with 4 GB of ram and a 500 GB hard drive
  
  After the installation I get the following error
  
  Configure the web server has failed
  
  and my diary is followed
  
  (November 6, 2011 12:16:12):-Hyperion Foundation Configuration...
  (November 6, 2011 12:27:51): in case of failure [11 min 39 sec] [WEB] Web server configuration
  
  What is my next step also solve this problem
  
  everything passed!

  It is in the same file of Excel of client tools certification matrix.