WebAuth ISE Central and vWLC 7.4

Similar Questions

• Good to know - configuration of the tuner TV G50 in Central and Eastern Europe

  Today I tried the TV tuner of my new G50, and after 2 hours of configuration it works perfectly. I want to share my experience with you.

  The configuration I used: satellite set-top box connected to an old VCR with cable SCART, VCR is connected to the G50 using the coaxial cable supplied with the computer.

  After the establishment of my country (Hungary) and by specifying the string (38) for my cable box, I got perfect sound but the picture of bluish gray with layer of candy red noise levels. Change of the cable or plug another old VCR, same tuning the VCR output channel (37) does not solve the problem. After an hour of reflection, I changed the parameters of location in the United Kingdom and the image finally transformed into bright colors.

  You know, my friends that the Windows Media Center still think here in Central and Eastern Europe that we still live behind the iron curtains and continue to use former SECAM television systems.

  Happy TV!
  Sandor.

  Hi mate

  Thanks for sharing this information with us! It s very useful!

  > The configuration I used: satellite set-top box connected to an old VCR with cable SCART, VCR is connected to the G50 using the coaxial cable supplied with the computer.
  It seems that you got an answer to your first question posted here in this thread.
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=166350
  This beautiful s

  Once again thank you

• Cisco vWLC and issue of ISE Central Web Authetication

  Hello!

  I have a problem with a central Web authentication wireless. CWA woking fine wired.

  My APs woking FlexConnect mode with local switching. When I connect to the WLAN with CWA, web page with the portal asked to not open, but I see, this redirection works...

  When I try to ping ISE and have an odd result:

  [email protected]/ * /: ~ $ ping 10.10.2.47

  PING 10.10.2.47 (10.10.2.47) 56 (84) bytes of data.

  64 bytes from 10.10.2.47: icmp_seq = 5 ttl = 63 times = 1.45 ms

  64 bytes from 10.10.2.47: icmp_seq = 8 ttl = 63 times = 2.22 ms

  64 bytes from 10.10.2.47: icmp_seq = 10 ttl = 63 times = 1.43 ms

  ^ C

  -10.10.2.47 - ping statistics

  21 packets transmitted, received 3, 85% packet loss, time 20106ms

  RTT min/avg/max/leg = 1.430/1.703/2.223/0.367 ms

  When I change the WIFI open network security or any other method, ping to ISE work very well. Help, please!

  Web Auth (CWA) Centre works different controllers/APs works in mode FlexConnect. Please consult this guide and check if you have a similar setup.

  http://www.Cisco.com/c/en/us/support/docs/security/identity-Services-engine/116087-configure-CWA-WLC-ISE-00.html

  If so, please post screenshots with your configs (ACL redirect, political in ISE and WLC SSD settings).

  In addition, the version of the code you run in your controller and ISE.

  Thank you for evaluating useful messages!

• Webauth ISE comments error

  With the help of web central authentication 802. 1 x on a 3560 at ISE.  I get on the web portal very well and was able to connect with the guest account and change the password.  Now when I get redirected to the portal each time I login I get "your session has expired.  Please log in again".  The ISE error is see as failed authentication comments square: 86017: Session cache entry missing.

  The newspaper of the ISE

  Other features:

  ConfigVersionId = 56, PortalName = DefaultGuestPortal, CPMSessionID = 0A0A084E0000001B4CCB2B1B

  Sessions of authentication switch see the

  ISE-test #sh authentication sessions int fa0/1
  Interface: FastEthernet0/1
  MAC address: 5c26.0a38.a800
  IP address: 172.31.255.15
  Username: 5C-26-0A-38-A8-00
  Status: Authz success
  Area: DATA
  Security policy: must ensure
  State of security: unsecured
  Oper host mode: multi-domain
  Oper control dir: both
  Authorized by: authentication server
  Group VLAN: n/a
  Redirect to URL ACL: ACL-WEBAUTH-REDIRECT
  Redirect URL: https://oranetise01.naismc.com:8443/guestportal/gateway? sessionId = 0A0A084E0000001B4CCB2B1B & action = cwa
  The session timeout: 3600 s (local), remaining: 1324 s
  Delay action: authenticate again
  Idle timeout: 900s (local), remaining: 418 s
  The common Session ID: 0A0A084E0000001B4CCB2B1B
  ACCT Session ID: 0x000001C8
  Handle: 0xC400001C

  Executable methods list:
  The method state
  MAB Authc success
  dot1x does not work

  ----------------------------------------
  Interface: FastEthernet0/1
  MAC address: 0004.f21c.66a9
  IP address: 10.20.0.177
  Username: 00-04-F2-1C-66-A9
  Status: Authz success
  Field: VOICE
  Security policy: must ensure
  State of security: unsecured
  Oper host mode: multi-domain
  Oper control dir: both
  Authorized by: authentication server
  ACL ACS: xACSACLx-IP-PERMIT_ALL_TRAFFIC-4f57e406
  The session timeout: 3600 s (local), remaining: 1253 s
  Delay action: authenticate again
  Idle timeout: N/A
  The common Session ID: 0A0A084E000000161ED6CBD9
  ACCT Session ID: 0x000000F2
  Handle: 0 x 19000017

  Executable methods list:
  The method state
  MAB Authc success
  dot1x does not work

  The session from the browser to the computer ID seems to match the session ID preceding.  I am at a loss.

  David,

  The session ID is generated by the switch then is sent to ISE in the access-request packet. What version of ISE are you on? You can upgrade to ise 1.1.2 because there some difficulties related to the writings of the session. I'm fighting a simliar issue that you said out there, but on the side of posturing. Hope the upgrade solves this problem for you. If you want to set a new session id, you can go to ISE and issue a certificate of authenticity (the session stop) or just bounce the port.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Laptop HP OMEN - 15-J9K19UA: Omen Ops Central and performance HP monitor

  HP Performance Advisor is part of the Suite of the Ops Central HP OMEN; Since the last update (Performace Advisor. 1.8.7826.0), it is no longer present in the suite. Is there a procedure/process to add later in the Ops Central?

  

  Hi D5GR

  Thanks for the reply.

  Analyzer Performance HP automatically updated on execution and do not seem to have a setting to disable the upgrade.

  For this reason, restoration is not an option, it would just upgrade on the first run.

  Also, I don't see the problem here as being the performance Analyzer, but subsequently OMEN Ops Central. The configuration file now points to the wrong directory for the advisor.exe. Why the config is not editable by the end user? Or the continuation of the Ops Central needs a config file to reflect the new location.

  Center Ops Suite config

  LNK0018 = c: Program Files (x 86) \Hewlett-Packard\HP Performance Advisor\Advisor.exe
  APP0018 = HP Performance Advisor
  ARG0018 =
  ICO0018 = c: Program Files (x 86) \Hewlett-Packard\HP Performance Advisor\Advisor.exe
  TIP0018 = Item0318
  RPL0018 =

  Actual location now of performance monitor

  C:\Program Files (x 86) \Hp\HP Performance Advisor\Advisor.exe

  Update 09/07/15:

  I actually solved this first remove the attrbute the Hewlett-Packard folder read-only, and copy the complete HP Performance Advisor file from the HP folder to this location. The icon shows now and the app works very well from there.

  

• Reference Dell Webcam Central and Windows XP (also Windows 7)

  For all the frustrated Dell customers out there who bought Dell computers delivered with Dell Webcam Central, only to have the application stops working with the built-in webcam ("Please plug in a supported webcam"), here is the link to a recent version of the Dell Webcam Central application:

  It is version 1.40.05.  This is the full installation, not an upgrade and includes the "Live!" Cam Avatar Creator software.  I have installed this package on my Inspiron 1012 running Windows XP Home Edition, and it works perfectly.  It is also the same version that shipped with my Studio 1558 running under Windows 7 64-bit.

  I'm not absolutely sure, but I think that the problem is caused when Windows Automatic Updates installs a new integrated version of the webcam driver (this is a Microsoft driver).  The old version of Webcam Central (such as 1.06 or earlier version) does not recognize the updated driver level.

  Don't bother download the 'DellWebcamSW' that Support Dell continues to try to direct me to via "tinyurl.com" (http://ftp.us.dell.com/app/DellWebcamSW.exe) - it is a version older that that delivered with my Inspiron 1012 and therefore will not even install.

  Dell really needs to pull together their support, at least when it comes to software.  They had download me Dell Webcam Central (at least three or four times), they sent me a CD to install the Dell Webcam Central, they even sent me a new hard drive previously imaged.  Downloads and CD always contains the same version that came bundled with my 1012, or even older, even though I told them I needed a newer version, and the new hard drive do not even have the application installed (I sent the new rear drive and kept my old drive).

  And don't bother looking on the site drivers and downloads (whether through the service tag or computer model).  He is not here, for my Inspiron 1012 or my Studio 1558, or for any other model of computer, I looked.  (The Inspiron 1012 list includes even not all the same drivers that requires my computer.)

  Zamolxe,

  The new link for Dell Webcam Central

  Rick

• VLAN and vWLC

  Hi all

  My vWLC is in VLAN 100 and all the APs are in VLAN 101. I need to know, if they join the processes of all the APs at vWLC will be accur normally or should I set up other things related to the tagging VLAN?

  Best regards

  No, I don't have anything accurding to the DHCP Service.

  If the APs and WLC management interface are in the same subnet, then the APs will be able to reach the controller.

  If the access points are in a different subnet, then a sort of mechanism is necessary for the APs to find their controllers.  Manually, each APs can be configured to access a specific WLC.  The most effective method is to use DHCP Option 43.

• Domain name of ISE, certificates and portal comments

  Hello world

  We have a deployment ISE using our internal domain for its FULL domain name (example: ise01.private.local). Now, we want to use for authentication of access as a guest and have noticed that the default redirect URL uses the FULL of the ISE Server domain name.

  It works very well for our business machines that we have our own generated certificates and internal certification authority. As we don't want a certificate, that the errors that occur for our clients, we need to use a public domain FULL name.

  Are we better off by changing the domain name used by the servers of the ISE, or is it possible to change the redirect URL to use a custom domain?

  I've heard suggestions that change the domain name is not supported, but I can't find another way.

  Thank you
  Mark

  Mark,

  You already have a public domain FULL name pointing to your ISE?  If so, let's assume that you authenticate you if you use a CWA.  First creat a new profile authorization, under common tasks, select redirect Web (CWA, DRW, MDM, DK, RPC), choose the authentication method (in this case, CWA) and set the ACL to use.  Just below, select the name of the static host/IP and enter the COMPLETE public domain name that points to your ISE.

  

  From there, you can create a permission policy to reference the profile that you just created.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• The ISE comments and update of Broswer Security Portal

  Hi, last week our assistance service received a constant steam of calls regarding our wireless of comments.  For most people, the problem is that there are browser will not allow them on the portal.  After a bit of investigation, we have established that what happens on devices with the latest browsers - IE11, Firefox 39 + and Chrome.

  OS x and iOS devices and those devices with older browsers are working ok.

  We run ISE 1.1.3.124 which is a certain number of revisions behind so I assume it is the question that 'ignore' safety standards in these new browsers.

  My plan is to upgrade to version 1.2, and then to 1.3 which I had planned to do next month anyway, but I just wanted to see if there is a work around on the ISE, which can be implemented so that the upgrade is made a thoughtful and not rushed.

  Thank you.

  This problem is apparent on several Cisco - ISE and at least first Infrastructure products.

  A couple of threads to discuss and provide workarounds:

  Thread 1

  Thread 2

  ISE 1.3 (or 1.4) will fix it. In addition, ISE 1.2.1 Patch 7.

  Here's the official Cisco ISE Bug ID.

• ISE licenses and profiling service

  Hello

  I tried to find the explanation of the use of the licenses of the ISE, but I'm still not sure about one thing.

  With the license, when the profiling service is enabled; is the number of endpoints consumed by the more license for each endpoint that has been profiled and authenticated or the number will be consumed basic license first?

  A properly authenticated device builds on the basic license.

  A device profile doing the license more.

  A properly authenticated device profile attracts both.

  That's why you need at least as much as more basic or licenses of the Apex.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• Can ISE monitor and alert for status n?

  Hi all

  Can someone tell me if the ISE server can monitor the State of n?  If a n goes done, ISE can send alert by e-mail or SMS?

  Thank you.

  N ° Ce would be a function of a network management system.

  Offer of Cisco in this space would be first Infrastructure. You can also use any number of cheap (and some tools open source) like Nagios or what to do simple up/down controls.

• Renewal of certificates Cisco ISE Admin and EAP

  Hi on board,

  Maybe I'm asking a rather stupid question here, but anyway :)

  Currently, I think about how renew a certificate admin/EAP on a node of the ISE and the effect on the endpoint authentication.

  Here's the thing that I do when I install initially an ISE node

  1.) creation of CSR on ISE (PAN) - CN = $FQDN$ and SAN = 'name of FQDN as well. "

  2.) sign CSR and certificate of bind on the ISE node - done

  Now, after 10 months or two (if the certificate is valid for one year) I want to renew the certificate of admin/EAP ISE.

  Creation of CSR: I can't use the $FQDN$ like CN, because there is still the current certificate (CN must be unique in the store, right?)

  So what to do now? I really need to create a temporary SSC and make the admin/EAP certificate, remove the current certificate, and then create a new CSR? There must be a way better and more important to do nondisruptive.

  How you guys do this in your deployments?

  Thanks again in advance, and sorry if this is a silly question.

  Johannes

  You can install a new certificate on the ISE until he's active, Cisco recommends to install the new certificate before the expiry of the old certificate. This period of overlap between the former certificate expiration date and the new certificate start date gives you time to renew certificates and to plan their installation with little or no downtime. Once the new certificate enters its valid date range, select the EAP or HTTPS protocol. Remember, if you turn on HTTPS, there will be a restart of the service

  Renewal of certificate on Cisco Identity Services Engine Configuration Guide

  http://www.Cisco.com/c/en/us/support/docs/security/identity-Services-engine/116977-TechNote-ISE-CERT-00.html

• Strategy of the ISE, DACL and VLAN change together

  So I had a hard time finding consistency in a policy that changes the VLAN and applies to a DACL. Originally, I discovered that the remarks were causing to ruin. But I can't find any consistency. Can I use vanilla ' oermit all ' DACL to ISE, as well as a change VLAN and it just doesn't work. My AuthZ is very simple... If you are wired_MAB and your point of endpoints in a particular group, then apply a policy that changes the VLAN and applies to a DACL. This seems like it was originally what ISE is supposed to do, but it seems so buggy. Strange thing is that if I change VLAN by itself, it works. But when I add to the DACL does not work either. Anyone have any ideas why this is?

  Your main problem, will probably be with assignment of DACL, which requires the switch to know the ip address of the client, before any list DACL will apply, at least in host multi-auth mode, I know a "bug", where analysis of device does not work yet once you change your local network virtual access initial port to another virtual LAN and try to apply a DACL using the validation of the MAB When this fails, try to check your schedule of ip device, and see if you hit the same "bug" is I've touched before. You should see this device analysis think that your device still has the original investigation period vlan or none at all. Remember that DHCP Snooping is also used to fill the device-tracking table, so make sure you use it also. Other than that, you could try mode closed, but that if them run could not be suitable for your environment.

• Cisco ISE CLI and GUI password expires

  I got Cisco ISE version 1.1 I am facing a problem with the password CLI and GUI, it expires and I can not connect, I do password reset using the DVD of the ISE.

  I naviguer navigate to the CLI of ISE, then perform the following commands:

  conf t

  password policy

  no password-expiration-enable

  and reset the password of admin GUI, using the command:

  # reset-passwd ise admin request

  from the interface of ISE I delete option for the devil admin account after 45 days.

  but after 60 days, the password expire again.

  kindly advise what to check for this question expires.

  Hello Mostafa,

  Yes, the last answer was more towards past-mgmt GUI because in the majority of cases, it happens with the administrator account on the user interface. I need to know if you've restarted the ISE after disabling the expiration of the CLI, because what I read a few weeks in an internal fault which password policy settings are not preserved on cli after restart so just to check could please check current on CLI w settings / help to see the race. in the password policy.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Upgrading ise Cisco and licenses

  I nedd upgrade of version 1.1.2 patch 4 to 1.1.3

  the deployment is distributed so that the shared deployment technique should be used:

  http://www.Cisco.com/en/us/docs/security/ISE/1.1.1/upgrade_guide/upg_dis_dep.html#wp1052969

  the guide is quite difficult to follow as there are has some missing licenses information that can potentially cause downs of service:

  in particular my questions reguarding the guide are:

  -OUR license is registered on the primary node of PAN only-

  (1) main node of PSN deregistration "D": that it will use the license? the inherited (10000 points of termination) or if he loses the license completely and lock the network authentication?

  (2) when the node "B" will be struck out and will become autonomous what happens to its licence? It will be lost? and what will happen to the "D" node when added to node "B"?

  (3) when I move back node "A" (after the upgrade and the record to the node "B") to the previous state of primary PAN, it is said that the license must be reloaded in it was lost when adding it to the node "B"... and in the meantime? No node will not authenticate because the primary node is unlicensed?

  TY

  Giuliano,

  De-registered node will always use its own license, that is, it becomes autonomous box without knowledge or information about anything around her. Assessment or any license you provided with.

  Of license is made by admin active cluster node, depending on its license.

  Take a look on:

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCug04405

  I do not think that license needs to be recharged, but maybe it's just my memory doesn't serve me. I'll check that one again.

  M.