Webcam and keyboard help with dv6-3008so

Similar Questions

• repair and spare parts for dv6-3008so

  I dv6-3008so and plastic base case broke around the hinge of the right hand. There are also other places where he broke the plastic on the laptop.  Is it possible to replace the parts of the casing of the laptop? and where I could get it done in Copenhagen to the Denmark?

  Hello

  1. please check part (if any) in this Book:

  h10032.www1.HP.com/CTG/manual/c01859609.PDF

  2 you can find phone number (for your country or the nearest location) in the following list:

  http://welcome.HP.com/country/W1/en/support.html

  Kind regards.

• The chain is be ignored and need help with why?

  Hi all.

  I hope again with help from the community.

  There is a chain created (code below) and it runs with success - at least she built MOST of the tables.

  The problem is: the last three tables all rely on the same condition and only two of them pass.

  The code below, step 4, steps 5 and 6 are all dependent on the success of step 3.

  When work for this string is executed, all stages of execution fails with the exception of step 5.

  The interesting thing (to me at least), is that regardless of the generation of the table is step 5 fails.  For example, in the code below prog_Y is attributed to step 5 and it fails.  If I swap prog_Y to step_4 and prog_X to step_5, step_5 still does not work.  Same result if prog_Z is listed as step 5.  While steps 4 and 6 to run correctly.

  Further info in job run lists of details: table or view does not exist.  However, I confirmed the procs behind programs every summer executed successfully and the tables exist.

  I tried several things to get more information: change the numbers.dropping/redefining step leaving down the chain and redefine, retype the steps and rules.

  Help, please.  Suggestions of why this step 5 may be at fault or where to find more information is super useful.

  Thank you very much

  Fritz

  When the string is executed partially

  /* 1. Create the string * /.

  BEGIN

  () dbms_scheduler.create_chain

  CHAIN_NAME = > 'dgr_cmpl_chain ',.

  RULE_SET_NAME = > null,

  EVALUATION_INTERVAL = > null,

  Comments = > 'Chain that loads tables of degree completion.');

  END;

  /* 2. Define the steps of the string * /.

  BEGIN

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_1".

  program name = > 'prog_intrmdt_1');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_2"

  program name = > 'prog_intrmdt_2');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_3"

  program name = > 'prog_base');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_4"

  program name = > 'prog_X');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_5"

  program name = > 'prog_Y');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_6"

  program name = > 'prog_Z');

  END;

  /* 3. Add rules * /.

  BEGIN

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > 'TRUE ',.

  action = > 'START step_1. "

  nom_regle = > 'rule_1. "

  Comments = > 'String degree start.');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_1 succeeded."

  action = > 'START step_2. "

  nom_regle = > "rule_2");

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_2 succeeded."

  action = > 'START step_3 ',.

  nom_regle = > 'rule_3');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_3 succeeded."

  action = > 'START step_4 ',.

  nom_regle = > 'rule_4');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_3 succeeded."

  action = > 'START step_5 ',.

  nom_regle = > 'rule_5');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_3 succeeded."

  action = > 'START step_6 ',.

  nom_regle = > 'rule_6');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > ' completed and full of step_5 step_4 and end step_6 "

  action = > "END."

  nom_regle = > 'rule_7');

  END;

  /*

  */

  /* 4. Select the string * /.

  BEGIN

  DBMS_SCHEDULER. SELECT ("dgr_cmpl_chain");

  END;

  /* 5. Create a job that points to the string. */

  / * Wizard of work used to create jobs * /.

  Thanks a lot for your suggestions.  Very grateful.

  Looks like this may have been a self-inflicted error.

  There were a few other errors which confuse this explanation.  But today, this seems to be the most likely case.

  The END condition was initially step completed 6.  Turns, then step 3 successful, all the steps 4, 5 and 6 began at the same time.  Well, step 6 was shorter than the 5 step execution time.  So step 6 would end, and the end to trigger the end of the string before step 5.

  This worked constantly since the END condition has been updated in order to assess the steps, 4, 5 and 6.

  Fritz

• Making the ear of corn and need help with the ball.

  I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:

  

  

  

  I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.

  Tank,

  You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).

  Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.

  I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...

  You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."

  Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:

  

  

  

  

  

  If the above consists of:

  Three roads closed, 8 points each, with ordinary linear degrees

  Three mixtures of open path with three anchor points for each key path

  Six paths closed for shadows / highlights, with 19 points in total

  Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.

  Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.

  JET

• CS 6, bridge and ACR-help with missing features

  Hello

  I have learned through acr and CS 6 videos. The videos were created by Piet van den Eynde, he uses an Apple Mac, I have a Windows based pc, but I don't think that's the problem.

  While it is in raw, it has option to switch between the open photo and one before and after when editing in Raw. There is also a Radial filter then the graduated filter also, I don't have in my version.

  The versions are the same, why this option is not available in my program, I have the full version, I can't find any setting in the preferences for these options.

  Help, please!

  The video tutorial was created using Photoshop CC (creative cloud). The features that you are looking for our new features that are available only in Camera Raw when running under the CC version. While the new versions of Camera Raw will run with Photoshop CS6, the new features that have been added to Camera Raw since the introduction of the version of creative cloud will be unavailable.

• What is the 'Live' page and need help with the data merge

  Hello

  Im very new to indesign naked with me. Im trying to merge data (need to create a fusion template?) and what I understand is that I need to be on the page 'Live '. Someone on the forum suggested this...

  There are two ways to set up the model of fusion. You can put your placholders on the master page or on the live page. If the placehlders are on the master page, only the frame (s) with placeholders, as well as other grouped objects, will be duplicated. On the live page, ID will try to duplictate EVERYTHING on the page, so you must be very careful about installation and sizing of objects.

  I want to be on the LIVE page... How can I do this? Got any other sort but can't get several records for the life of me to come.

  Thank you for your help adavance

  It is the opposite of multiple records per page. Make x copies of a single record on a page, put x sets of organized placeholders as you want on the page. A good way to do it is with Edit > step and repeat after you set up the left superior set. Now merge as one record per page.

• I'm new construction sites and need help with boxes of zoom

  I'm currently building a website with a shopping cart, before getting to the basket I'd like to see an option for expansion of each element. They see the regular image and then if I could add a button they can click to view a larger image. Unfortunately I do not have the Web site on a server at this time. Any help you can give me would be appreciated. Thanks in advance.

  Try this:

  http://ALT-Web.com/demos/jQuery-disjointed-image-gallery.shtml

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• new to pl/sql and need help with the procedure

  Hello, I got two personnel and BONUS tables which are not bound by constraints
  
  STAFF
  ID_NUMBER HIREDATE SALARY BONUS
  ---------------------- ------------------------- ---------------------- ----------------------
  100020 12 MAY 03 13600
  100021 4 NOVEMBER 01 30000
  100022 8 APRIL 02 28000
  100023 8 APRIL 02 24000
  
  BONUS
  
  PERCENTAGE MORE_THAN_YEARS
  ---------------------- ----------------------
  0.1-3
  5 0.15
  0.3 7
  9 0.45
  0.5-12
  
  
  I am trying to create a procedure that would calculate bonus based on years of employment according to the bonus table.
  If employees sysdate-hiredate is greater than 5, it is salary*0.15%...
  I created this procedure, but I am stuck here.
  
  I calculated the duration of employment for each soldier using the slider in a loop, but I don't know how to get the bonus Board values and connect with each other.
  Please help me!
  
  create or replace
  procedure bonus_staff
  as
  cursor c1 is select * personnel;
  good true;
  Start
  FOR ITEM IN C1
  LOOP
  good: = FLOOR (months_BETWEEN(SYSDATE,ITEM.hiredate)/12) *.
  personal update
  set bonus = good
  where id_number = ITEM.id_number;
  When exit c1% notfound;
  end loop;
  end;
  /
  
  Thanks in advance...

  personal update
  set bonus = (select percentage
  bonus of
  where more_than_years = (select max (more_than_years)
  bonus of
  where more_than_years<=>
  )
  /

  You can do this in pure SQL, which operates on a game, so no PL/SQL is necessary.

  ----------
  Sybrand Bakker
  Senior Oracle DBA

• I have HP Deskjet 3050 a all-in-One Printer - J611g and need help with printing, please?

  I just bought the HP Deskjet 3050 all-in-one printer-J611g a. The manual has shown to do the printer double-sided printing odd pages then only print even pages only, and it works very well for one page on one side of the sheet. However, when I want to print two pages on one side of the paper and another of two pages on another aspect of the sheet, print the odd pages or even pages only just does not work! Ditto to print more than one PowerPoint presentation on one side of the page, if I click on print the odd pages only, then the printer will display the odd number of powerpoint slide instead of print odd number. I used to have another printer HP Officejet and never had any problems with two-sided printing. This printer comes with the function double-sided printeing at all?  If so, how can I do duplex printing?

  Thank you very much!

  This is a limitation of the software that you use and how the HP printers recognize the incoming files. When compress you multiple pages on a single "page" this page is actually two pages, with even and odd numbers. It is therefore difficult for the software to determine the page numbers 'odd' and 'even' when printing, because it is no longer applicable to the relevant pages, but the format in which they are being printed.

  I hope this information is useful!

• Updated software and need help with what to buy

  I am a professional wedding/portrait photographer who uses photoshop cs3 with some additional photography actions in Photoshop.  I have lightroom also but that you not him have not used in years. I think it's lightroom 1. I shoot both first and JPEG. I'm interested in some other photoshop actions that require me to use Lightroom 4 or later or Adobe csmera gross. I also know my photoshop is very old, but it's not my priority to replace. My question is that if I get Lightroom which should buy Lightroom 4 and a higher?  And can I edit raw files in Lightroom 4 or higher, or do I also Adobe camera raw?  In addition, what are the links to purchase programs and are is only a compensation per month thing?  Thank you!!

  Adobe Camera Raw is a plug-in for Photoshop and Photoshop Elements. All the technology that is in the plug in Camera Raw is integrated in the Lightroom program. Lightroom does not use plug in Camera Raw, because he didn't need it. But the technology is precisely the same thing. So I do not know you can say that Camera Raw is better or worse than Lightroom because they use the same technology.

  For buying Lightroom 4 or 5 of Lightroom, you will need to find a dealer that has the version that is available. Adobe sells only Lightroom 6, the last standalone and Lightroom CC 2015, which is the version of the subscription. Programs are basically the same, although Lightroom CC has received some updates of features that are not available in Lightroom 6. The subscription creative cloud is really a good because not only that you get all the features of Lightroom and updates frequently, but you also have the latest version of Photoshop with all the features it offers. Photoshop and Lightroom together make a powerful combination, especially for the professional photographer. And if you're still using Photoshop CS3, I think you would find that there are huge advantages to have the latest version of Photoshop.

• new and need help with the value $ in a sale

  I have just come across this product and h

  Ave fall in love with. question: how to format

  from field pays $ 0.00 in

  the number field instead of only 18

  all free used is appreciated

  Define the display pattern for the numeric field to num {($z9.99)} to display as $18.00 18...

  Thank you

  Srini

• IM GOING CRAZY AND NEED HELP WITH ADOBE 9.3

  I tried to uninstall adobe 9.3, but when I do I get this message: the component you are trying to use is on a network resourse which is not available.  Click OK to try again. or enter and replacing the path to the folder containing the installation package 'AcroRead.msi' in the box below.

  I have

  I tried to reinstall, uninstall, find the folder... nothing. I'm a pc at home, and I'm not addicted to any network... Please help me! I'm about to start online courses and have a pdf program that works lmao

  You can try the Microsoft install Cleanup Utilitiy: http://majorgeeks.com/download.php?det=4459

• How can I make my second screen a monitor? New versions wiped my preferences and do help with no help.

  I am trying to use my second screen as a monitor size for editing. All my old layouts have been lost in systems and subsequent updates. It was a simple task made now lost in the options. How to do this task once simple?

  @

  Edit/Preferences... this tab:

  

  Neil

• I have a logitech zoom webcam and also skyoe, Skype does not recognize the web cam and I get an error box, why?

  My webcam logitech research... I see myself but when my family made a video call to me I can't see them and they can't see me, but I can speak for them. We have all webcams and their work with another family member, but mine does not. Why Skype does not detect my webcam?

  POgrady,

  Hello and thanks for your message.  You mention that your webcam works, but the problem is with Skype.  Most likely, you will need get the appropriate Skype settings.  I've linked the support page for Skype so that you can ask them on the required parameters, etc.
  https://support.Skype.com/
  Please let us know if this information did or didn't help you get your problem is resolved.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Need help with the port forwarding for a XBox remote Streaming

  I have a router R6200v2 and need help with port forwarding.

  I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere

  http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/

  I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.

  Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?

  Hi @varxtis,

  You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.

  1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)

  2. Select the type of service (TCP, UDP or both)

  3 entry 5050 times a start external Port and external endpoints.

  4. Select the IP address of your XBOX.

  5. Select apply.

  6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.

  Kind regards

  Dexter

  The community team