Webcam compatibility question

Similar Questions

• WebCam-processor questions

  Hello HP... I have two questions

  Why my webcam can capture image (1.3 MP MAX) but before I fix my cell phone to the service center it (5MP MAX)
  and for the second question, could you tell me what is the core i3, Lossnay how does have... I checked my cell phone there just 1 Core... It is therefore a 100% CPU usage when I open a program
  here my laptop spec:

  Product name: HP 1000 Notebook PC

  Product number: F2D09PA #AR6

  Operating system: Windows 7 Home Premium 64-bit

  Processor: Intel (r) Core i3 - 3110 M CPU @ 2.40 GHz

  RAM: 2 Slot A-DATA Technology 1x2GB 1600 MHz

  Graphics card: Intel (r) Graphics 4000 HD (total mem about 768)

  I trust you... i'be waiting for your answer
  Thank you and sorry for my bad English

  Hey Dali99GRT,

  The process that you are talking about is a little paradoxical to understand. The system idle process reports how idle the CPU is. In your explanation the processor uses 1 to 10% of its capacity, so this isn't the cause of your slow performance. Here is an article that explains it thus: why is the System Idle process hogging all the resources?.

  I hope this helps answer your question.

• HP Deskjet 3055a: HP 301XL COMPATIBILITY QUESTION

  Hello

  I have a question about the compatibility between my printer and an ink cartridge. I'm hoping to buy a cartridge of ink HP 301XL Tri-Colour of this store: http://www.argos.ie/static/Product/partNumber/1384677/c_1/1%7Ccategory_root%7COffice%2C+PCs+and+phon...

  I wonder if it will be compatible with my HP 3055a Deskjet printer. The website says that the cartridge is compatible with HP Deskjet 3050, it means its compatible with the 3055 has?

  Also, what I have to buy a black cartridge to print colors black or is this included in the Tricolor cartridge?

  Thanks in advance.

  Hello

  You must always black ink cartridges even all 3 colors preferred a good amount of mixture will give all colors from black to white.

  Kind regards.

• WebCam compatibility

  Is van back WebCam question than quiero instalar y no me los reconoce (NOT compatible son)

  • Genius VideoCAM GF112
  • Perfect choice PC-320241
  Hago what?
  Please select your language in the drop-down list at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below: 

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace:
  

  http://support.Microsoft.com/common/international.aspx

• HP Pavilion p7 - 1227c: GDDR5 graphics compatibility question card XFX Radeon R9 380 4GB with HP Pavilion p7 - 127c?

  I bought this Radeon R9 380 4 GB from Ebay and installed it in my computer, but it won't work. Turn fans of the graphics card but the PC screen remains black. I contacted the seller who said that the video card has been tested prior to shipment and that it may be a compatibility issue with my PC. I know that this graphics card has a PCI Express 3.0 interface 16 x so that my PC has a PCI Express 2.0, but I don't think that this could be a problem.

  Do you know if there is a problem of compatibility between the graphics card XFX Radeon R9 380 4 GB of GDDR5 memory and the HP Pavilion p7 - 127C?

  Note: I move the power supply to 650W.

  @Astyx, welcome to the forum.

  You are right that the PCIe 3.0 is backward compatible with PCIe 2.0.  However, your problem is the motherboard.  The Radeon card requires UEFI in the motherboard instead of a Legacy BIOS. The BIOS may not be walking in the UEFI.  PCIe 3.0 cards requiring UEFI will not work in any other location.  HP didn't start using UEFI until mid-October 2012.  The latest maps to exploit without UEFI are the GTX 660/670.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Satellite A300 - 1 L 0 - display compatibility question

  Hello!

  One of my friends got a Toshiba Satellite A300 - 1 L 0 Notebook with broken screen.
  On Ebay that he was lucky to get a laptop Toshiba A300-1HP, which is optically identical to his book and regarding the roadmap Toshiba product has almost the same technique except the Core 2 duo model, ATI HD 3xxx model specifications and the size of HARD drive, as far as I can tell. The screen has the same features on the product sheet.

  More on ebay, there are "universal" sold screens for satellite A300 - meaning if you type "Satellite A300 Display" didn't it specify which A300 model you have.

  What you mean?
  Are the poster at least "Pin Compatible" or why it has an engineer / engineer use a different layout of the pins on the same box for laptop?
  The A300 has more motherboards even?

  Thank you!!!

  Hello

  I guess that all screens for a Satellite A300 series should be compatible with the unique Satellite A300 model.
  All laptops Satellite A300 was equipped with a TFT 15,4 "billboard and it is the most important fact. You must use this display TFT 15,4 "Panel.

  The resolution may be different and will not affect the display compatibility because the graphics card is able to support different resolutions.

• C: 1050 1050c C6074A 0B 0006 EMod compatibility Question

  I have a client with a probable error of EMod, customer is a few hours away from the office, it is not practical to stop for the diagnosis.

  I remember reading an article online about compatibility EMod seven or eight years and I think it says the only available at HP EMod is part C6074B the Firmware and the memory should be replaced if the new EMod version has been installed in the printer C6074A.  I hope someone can check this for me.

  I suspect that HP sells is even more the EMod for this machine, they dropped officially supported in 2006.

  I also recall that in the case of this error message of leakage cable replacement and transport is also recommended. (Belt too if the cart is replaced).

  Overall I informed my contact as the reclassification to a T1500 and using the October 2015 DesignJet trade / trade Up Program would be my recommendation, because although I have difficulty the 1050c there are other components that may fail due to age, (System of Tube and Station Service), and if I had to replace all of the parts needed to put the machine in "New condition" that they could spend as much as a new machine would cost.

  The C6074B is the model most and the main card will fit in the chassis of C6074A, but the back cover will line up for the EIO housing and housing will be available.  0B 0006 is usually the Kiss to death on the C6074A, unless it's one of the machines later of the C6074A that came with the fuse as the model liked.  15% of a tips maybe the fuse.  Yes, you will need firmware that corresponds to the Commission of 'B' and the memory chips which are not the same as 'A' memory of Council.  My only different recommendation of yours would be to recommend the T520 which is much less expensive and more looks to plug its former c. 1050

• Video card compatibility question

  I need to replace my video card ATI Radeon HD 4850 (GDDR3) for my HP Pavilion Elite.

  I have 2 questions:

  (1) a graphics card with GDDR5 memory would be compatible with my motherboard and a computer?  (my current graphics card is GDDR3)

  (2) PCI Express 3.0 would be compatible?  (my current graphics card is PCI Express 2)

  Thank you.

  Motherboard:

  Tip: PEGATRON CORPORATION TRUCKEE 1.04
  The bus clock: 133 megahertz
  BIOS: American Megatrends Inc. 5.22 10/12/2009

  System:

  HP-Pavilion, AW020AV - ABA e9280t

  Windows 7 pro 64-bit

  Processor:

  3.33 GHz Intel Core i7 975 processor
  cache of 64 kilobytes main memory
  cache 256 KB secondary memory
  memory tertiary cache 8192 KB
  64-bit ready
  Multi-core (4 total)
  Hyper-thread (8 total)

  12 GB of Ram (I think than DDR3)

  dim13 wrote:
  

  I need to replace my video card ATI Radeon HD 4850 (GDDR3) for my HP Pavilion Elite.

  I have 2 questions:

  (1) a graphics card with GDDR5 memory would be compatible with my motherboard and a computer?  (my current graphics card is GDDR3) Yes. The video memory is on the video card and is not a problem.

  (2) PCI Express 3.0 would be compatible?  (my current graphics card is PCI Express 2)

  It is also an answer yes because PCI Express 3.0 is a compatible specification down.

  Thank you.

  Motherboard:

  Tip: PEGATRON CORPORATION TRUCKEE 1.04
  The bus clock: 133 megahertz
  BIOS: American Megatrends Inc. 5.22 10/12/2009

  System:

  HP-Pavilion, AW020AV - ABA e9280t

  Windows 7 pro 64-bit

  Processor:

  3.33 GHz Intel Core i7 975 processor
  cache of 64 kilobytes main memory
  cache 256 KB secondary memory
  memory tertiary cache 8192 KB
  64-bit ready
  Multi-core (4 total)
  Hyper-thread (8 total)

  12 GB of Ram (I think than DDR3)

• Installation of LabVIEW Runtime Engine 2016 compatibility questions...?

  Hi, I have just a quick question...

  I just download LabVIEW Runtime Engine 2016 in a PC at work. I need to run a VI in this PC that has a few executables 2015 VI for the moment. My question is, if I install the runtime from 2016:

  • Will there be any problems with executable files that have been compiled with the version of LabVIEW 2015?
  • Or these VI is fully compatible with Runtime 2016?

  Thank you in advance to all!

  JLuna wrote:

  I just download LabVIEW Runtime Engine 2016 in a PC at work. I need to run a VI in this PC that has a few executables 2015 VI for the moment.

  I guess 'the PC' has already the LabVIEW 2015 engine run. It is still necessary to run the executables of 2015. You must install the engine LabVIEW 2016 run if you also want to run executables built with LabVIEW 2016. Both the run-time engine can be installed at the same time.

  In order to run screws, you need the LabVIEW Development System. LabVIEW 2016 can generally open, recompile, and run screws LabVIEW 2015 (and many old versions, Details).

• Webcam compatibility issue-

  I have a quickcam Logitech V-UAP41, I connected it to my computer but my computer says that it will not work with the operating system.  Is there a patch or download it, that I can use to make this webcam work on my new computer?

  Hi DarkBolt500,
  I suggest that you try to think below:
  Logitech support
  hope this helps
  B Eddie

• Logitech Webcam C525 question.

  Just installed above webcam and associated software.  When I try to perform any action on the opening page, I get the following error message: "Launcher_Main.exe has stopped working" and the page is automatically closed.  As this seems to be a Windows message, thought I would ask for help here first.

  Hi Ray,

  Please contact the Microsoft Community.

  I only refer to troubleshooting of Logitech because this could help you resolve your problem faster-

  http://Logitech-en-AMR.custhelp.com/app/answers/list/section/Troubleshoot/CRID/405/lt_product_id/7794/tabs/1, 3,2,4, 5/cl/we, fr

  We know if that helps.

• Compatibility question

  The Sony XYST1M micro is compatible with the Sony PJ710 camcorder? Can it be connected with a cable?

  Hi gmarkovich,

  Yes, the ECMXYST1M micro is compatible with the HDRPJ710 camcorder. But you will need to attach the microphone on the support of VCT55LH and to connect the two devices via a cable to use. The foot of the microphone will not directly adapt to the shoe of the camcorder, that's why you need the support.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Power Supply compatibility question

  Hello!

  Tomorrow, my new Dell XPS 8700 arrived. I opted for the internal model with 8 GB of RAM and 1 TB HD, Intel i7 4790.

  In the meantime, I ordered a few updates - specifically a 128 GB mSATA drive, an extra 1 TB internal HD and a Gigabyte GTX 960 overclockee edition.

  Currently, I have concerns that the stock power supply may not be up to the task - and am shopping around just in case. I met one at an incredible price, and have two questions for anyone here with experience in this field:

  (1) Will Dell installed standard power supply handle additions above?

  (2) if not, is compatible with the machine down and architecture Haswell?

  www.TigerDirect.com/.../Item-details.asp

  Thanks a lot in advance for any help!

  Welcome to the club of 8700 XPS!

  XPS 8700 OEM power will be well with a GTX 960.  No reason to spend, even if you add the mSATA and an additional HARD drive or two.

  The mSATA reader will probably less than 5 extra watts, and the HDD is maybe 10 watts max.

  And, insofar as this power supply, it seems that it is done by abderrazak, and is not a manufacturer that I heard a lot about.

  http://www.TomsHardware.com/Forum/351015-28-will-andyson-make-good

  I stick to Seasonic, some of the highest in Corsair or Silverstone, and their research before investing.

• Satellite C870 - 11G - AC power adapter compatibility question

  I have a C870 - 11G.

  It uses power adapter part no PA3917U-1ACA, who recently became damaged when someone tripping over the cable and it bends the end that connects to the laptop.

  I used to have a Toshiba C660D-10W a few years ago and the power for this laptop adapter you still, even part no PA3714E-1AC3,.

  Does anyone know if this is compatible with my C870?
  It seems to fit but I wanted to try it incase it damage the battery or something.

  Any advice will be greatly appreciated.

  On the first picture you can see the values:
  * 19V * (v) * 3.42A* (Ampere)
  On the second picture, you can find the same values.

  If two adapters providing the same volt Ampere and should be compatible.

• Compatibility question: replace GeForce 9500GS

  My video card from nvidia geforce 9500gs finally gave up after having done non-stop noise during 3 days. The fan stopped turning tonight and now I need a new video card for my Hp Pavilion Elite m9510. I'm about to make a purchase online for a PNY GEforce gt440 I wanted to just confirm that it works very well with current 350 Watt power supply or please feel free to make suggestions for other cards. a big thank you in advance, Al

  Hello

  Unless you're ready to replace your power supply, the GT 440 is probably your best bet.