Webcam not found - tried everything, please help!

Similar Questions

• I have 2 laptops and one desktop. Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help. I use Windows XP

  I have 2 laptops and one desktop.  Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help.  I use Windows XP

  Hi JessaRoy,

  · The computer connected to the network or are they computer autonomous?

  · What is the number and the model of the computer?

  · What is the service pack installed don the computer?

  · What is the full error message with the error code, that's all?

  · What are the steps you tried to solve the problem?

  Try the steps from the link below: to test TCP/IP connections by using the ping and the commands net view: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Impossible to get Fallout 3 to run Windows 7. Tried everything, please help!

  So I literally disappeared EVERYWHERE and tried EVERYTHING and still not get my FO3 work :/

  I did the d3d9, tried every compatibility, fixed parts of the .ini I was supposed to and even tried the affinity. NOTHING WORKS. It still crashes very quickly once I have created a new game.

  If you have any other suggestions please let me know. I'd really like to play my FO3 :/

  Here is my card if they help:

  OS: Win 7 Home Premium 64-bit
  Model: Dell Inspiron N4110 (laptop)
  Processor: Intel (r) Core i3 - 2310 M CPU @ 2.10 GHz, 2 100 Mhz, 2 Lossnay, 4 logical processors
  RAM: 4 GB
  Graphics card: Intel HD integrated Graphics

  I know, that he should not have to do with my graphics card, because I know people who also have the game works very well with an integrated graphics card. Thanks in advance! ^_^

  
  And please no mods who just copy and paste the same answer to every question... I want to help legitimate working :/

  "I know that he should not have to do with my graphics card, because I know people who also have the game works very well with an integrated graphics card. Thanks in advance! ^_^"

  Just to unravel the terminology. There is no 'card' with integrated graphics. There are
  chips on the motherboard for some, but the graphics card Intel are part of the cpu.
  As with graphics cards, Intel HD graphics card not all are created equal, so if your machine doesn't have the same processor as the 'other' it doesn't have the same onboard graphics.
  You cpu has HD3000 graphics that should be enough run the game, but you have
  starting with some settings and resolution and work your way to the top if the game runs OK.
  In addition, the different laptop models have a different amount of VRAM dedicated, then
  If your model has only 64 MB of VRAM, it is less likely to work the game.
  If your machine is not the same brand and model and does not have the same software
  configuration settings and system as the 'other' it can not be compared accurately.
  Many small things add up to a big difference.

  Describe the crash - lock-up, black screen?
  Screen black accidents are common with FO3, and anything that can be done is to try and
  minimize them. camera comes with the question of four cores, or by using the settings too high.
  It can also be your anti-virus. Try disabling that before launching the game.

  "And please no mods who just copy and paste the same answer to every question...". I want legitimate help that works :/ »
  This is done especially in the absence of details ("my game not start what to do?)
  in the original post.
  You have to start somewhere and the cut and paste is generally these steps which must always be taken. There are no shortcuts to troubleshooting, and assuming that "which can not be she" can lead to more frustration, especially after several hours of stuffing about to find that's all (* headbang *).
  It said that some of the answers cut and paste are not yet on the subject, but it is a
  Forum of the community of civilians, would be nice.

  Ok then.
  -You tried the 'quad cord fix? You don't need with a dual core cpu and use
  may be counterproductive. Like the game runs better on two hearts he can also help
  to disable hyperthreading on the cpu, that two "virtual" cores more equals four.
  -That you have installed the game using Vista sp1 compatibility mode. (Note I said installed)-
  -You have installed the Windows 7 codec pack to solve the problem of ffdshow, or used another
  method.
  -You have installed all Windows updates
  -The game has been patched and you have not yet installed mods.
  -You do not use Anti-aliasing, Bloom, HDR or V-sysnc (which use too many resources for your HD graphics card).
  -Do you have a pagefile (virtual memory) enabled?
  -What parts of the .ini correct you?

  Clean boot is a viable option for troubleshooting software conflicts are always a potential-
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Review the programs that you can run after you start in Windows as a potential
  Thus the conflicts. With minimum specifications, you need minimum stuff running while
  play the game. None of the browsers open, etc.
  Time to clean boot (or just by running msconfig) and clearing the check box next to
  any program in the Startup tab that you don't need to run in the background when loading Windows you can reduce the amount of resources used during the game.
  It may be a permanent framework. There are a lot of software that thinks it's important enough
  to start with Windows, do not...

  For more ideas try the forums Nexus-clicky and list in detail what you have tried,
  or risk all reread the same suggestions.

  You can also find something useful in the Guide to Tweak FO3 - TweakGuides.com
  .

• IV volume + iv tried everything, Please HELP!

  IV TRIED EVERYTHING BUT MY LAPTOP HAS NOT EITHER VOLUME! I WOULD LIKE TO HAVE SUITABLE ANSWERS. THIS JUST HAPPENED TODAY BEFORE IT WAS FINE!

  Hi Kathleenhiggins,

  ·         What version of Windows are you using?

  ·         Is it the limited issue only with Internet Explorer?

  ·         What are the troubleshooting steps you have already tried?

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  In the meantime you can view the below article for help.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Reply with more information about the issue so that we can help you better.

• Windows Vista - unidentified network Local Access only tried everything please help

  Hello

  I have an Acer Aspire M1610 running Windows Vista Home Premium Service Pack 2 and 2 days ago when I turned it on the internet was not working and it says unidentified network Local access only. I use a wired Ethernet connection. I don't know how it happened as before I had used the computer as usual and the Internet worked very well. I did a lot of research and read a few forum posts about this problem and tried a few solutions but non of them worked. I tried the following:
  (1) disable my firewall and anti-virus who didn't work, I turned their back on immediately.

  2) press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type route delete 0.0.0.0 press ENTER.

  Type ipconfig/flushdns press enter

  Restart your computer.

  (3) the internet protocol version 6 clear, disable and enable the thing

  (4) if same Norton software removal tool I had uninstalled the when I got the computer I read that uninstall it by using uninstall windows is not entirely remove it.

  (5) another thing in the command prompt I don't remember exactly what it was, and I can't find the site Web is because I looked so much of.

  (6) I even reset my computer to factory settings and then uninstalled all unnecessary software and trials that come with and used the software again Norton removal tool.

  Does anyone know how to fix this? Any response will be greatly appreciated.

  Thank you

  Hi Alex,

  Have you tried to assign the IP addresses manually?

  I wish that refer you to this article-

  http://support.Microsoft.com/kb/928233/en-us

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Thank you.

• I am trying to install the service Pack 2 or 3... they are all two generate error message: EXPECTED VERSION OF THE PRODUCT NOT FOUND... Help, please. Thank you.

  I am trying to install the service Pack 2 or 3... they are all two generate error message: EXPECTED VERSION OF THE PRODUCT NOT FOUND... Help, please. Thank you.

  George in San Diego

  Assuming that Windows XP has been reinstalled just for some reason any...

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Help my Lenovo G550 Webcam not found

  Help my Lenovo G550 Webcam not found

  It was working fine last night and I went this morning etil did not work!

  Help her bed to the ive tried caraa drivers

  Press fn + ESC to activate it.

• I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

  I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

  Honestly, this sounds like a problem of carrier. Are you able to make/receive calls or send and receive text messages? I would first check with the carrier to make sure that your phone is still set up to use mobile data. Something was accidentally deleted when they merged your bills.

• Windows95 CD-ROM - game Need for DCC Speed-No. pieces found - can not install the game - please help. ___

  Windows 95 CD-CD-ROM-game Need for DCC Speed-No. pieces found - can not install the game - please help.

  ------------------

• I just bought first elements13 and I installed it. But whenever I try to get my license number, an error message appears that says that my computer is not connected to the internet. I've tried everything. Help!

  I just bought first elements13 and I installed it. But whenever I try to get my license number, an error message appears that says that my computer is not connected to the internet. I've tried everything. Help!

  Check your hosts among other common problems, sign in, activation or connection errors. CS5.5 and later, Acrobat DC

• Internal drive not found, trying to reinsert the hard drive Alienware R4

  I had a few problems leading to myself for buying a new drive hard drive for this reason "internal drive not found, try to reinstall the hard disk.

  I did a test of Epse and found that the hard drive had problems.

  so I went out and bought a new, replaced the old and the new and always with the same error "internal drive not found, trying to reinsert the hard drive."

  I ran the test Epse, there is no problem with anything, it was a successful test. So why am I still unable to cross the screen?...

  Anyone have by chance any suggestions as to why it is continue to happen? Can I get a helping hand please? :/

  OK, I think I'm making progress.

  I changed my starting uefi to legacy, now I'm on the screen of windows install! Woohoo

  one problem, I don't have a windows installation cd or anything, I have to buy windows 7?

  or is there something I can do to restore my original?...

• built-in webcam not found in the Device Manager, Samsung r710 laptop, windows 7

  I have a laptop Samsung R710, who settled with Windows 7. The laptop came with a built-in webcam. I was not able to get a piece of software to recognize the camera. I did a system restore. Updated the drivers. Visited the Samsung website for updates. When I opened the Device Manager to see the drivers for the webcam, webcam not found in Device Manager.

  Any help to fix this would be greatly appreciated.

  Thank you, I must admit to thinking in the same direction you... buy a separate camera or wait until he is more under warranty and have a quick look at the wiring around the hinge.

• my computer HP G62 laptop won't let me connect to this subject says not found user profile can help you

  my computer HP G62 laptop won't let me connect to this subject says not found user profile can help you

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• Hello! A few days ago, I, disabled Photoshop subscription (CC of Lightroom and Photoshop CC) Act in accordance with your instructions, I have not be enabled. Please help solve the problem.

  Hello! A few days ago, I, disabled Photoshop subscription (CC of Lightroom and Photoshop CC) Act in accordance with your instructions, I have not be enabled. Please help solve the problem?

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• I went to Adobe Creative cloud to install Bridge. I pressed the button download next to the bridge and my creative cloud now says "update installation...". "but the sequence is at 0% and will not get above. Please help me, thanks

  I went to Adobe Creative cloud to install Bridge. I pressed the button download next to the bridge and my creative cloud now says "update installation...". "but the sequence is at 0% and will not get above. Please help me thank you all

  Hello

  Please quit Setup and then exit the creative application of cloud.

  After that, restart the machine.

  Let us know if that helps.

  Kind regards

  Bani