IV volume + iv tried everything, Please HELP!

Similar Questions

• I have 2 laptops and one desktop. Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help. I use Windows XP

  I have 2 laptops and one desktop.  Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help.  I use Windows XP

  Hi JessaRoy,

  · The computer connected to the network or are they computer autonomous?

  · What is the number and the model of the computer?

  · What is the service pack installed don the computer?

  · What is the full error message with the error code, that's all?

  · What are the steps you tried to solve the problem?

  Try the steps from the link below: to test TCP/IP connections by using the ping and the commands net view: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Webcam not found - tried everything, please help!

  I can't get my webcam to be detected in any program, I've tried so far. I have a laptop ASUS. It has an internal webcam. This webcam, used to work. He says its fine all in Manager devices etc. Just that when I go to use Skype or whatever it is he just does not detect it. Have you tried the pilot - says update latest driver is installed etc...

  I thought that maybe my internal webcam is broken, so I bought a new external webcam, just a generic brand name. It does the same thing. Everything seems fine, he detected, it installed, it, she worked in my device manager, the driver is up to date etc... just says: "no webcam not detected" when I come to use it... I have tried everything that I can think and read other peoples troubleshooting questions etc, still cannot solve this problem...

  Is it a secret "disable webcam" button a hand I could have pushed and forgotten or something? I'm full of ideas... Thanks for any help.

  Hello Rhuben,

  Thank you for your response.

  I appreciate your time.

  I suggest you to update BIOS and drivers from the chipset of this link and check.
  Reference:
  https://www.ASUS.com/support/download/3/336/0/1/LUFmeP8fwFruEdH7/30/

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Please keep us updated.

  Thank you

• Impossible to get Fallout 3 to run Windows 7. Tried everything, please help!

  So I literally disappeared EVERYWHERE and tried EVERYTHING and still not get my FO3 work :/

  I did the d3d9, tried every compatibility, fixed parts of the .ini I was supposed to and even tried the affinity. NOTHING WORKS. It still crashes very quickly once I have created a new game.

  If you have any other suggestions please let me know. I'd really like to play my FO3 :/

  Here is my card if they help:

  OS: Win 7 Home Premium 64-bit
  Model: Dell Inspiron N4110 (laptop)
  Processor: Intel (r) Core i3 - 2310 M CPU @ 2.10 GHz, 2 100 Mhz, 2 Lossnay, 4 logical processors
  RAM: 4 GB
  Graphics card: Intel HD integrated Graphics

  I know, that he should not have to do with my graphics card, because I know people who also have the game works very well with an integrated graphics card. Thanks in advance! ^_^

  
  And please no mods who just copy and paste the same answer to every question... I want to help legitimate working :/

  "I know that he should not have to do with my graphics card, because I know people who also have the game works very well with an integrated graphics card. Thanks in advance! ^_^"

  Just to unravel the terminology. There is no 'card' with integrated graphics. There are
  chips on the motherboard for some, but the graphics card Intel are part of the cpu.
  As with graphics cards, Intel HD graphics card not all are created equal, so if your machine doesn't have the same processor as the 'other' it doesn't have the same onboard graphics.
  You cpu has HD3000 graphics that should be enough run the game, but you have
  starting with some settings and resolution and work your way to the top if the game runs OK.
  In addition, the different laptop models have a different amount of VRAM dedicated, then
  If your model has only 64 MB of VRAM, it is less likely to work the game.
  If your machine is not the same brand and model and does not have the same software
  configuration settings and system as the 'other' it can not be compared accurately.
  Many small things add up to a big difference.

  Describe the crash - lock-up, black screen?
  Screen black accidents are common with FO3, and anything that can be done is to try and
  minimize them. camera comes with the question of four cores, or by using the settings too high.
  It can also be your anti-virus. Try disabling that before launching the game.

  "And please no mods who just copy and paste the same answer to every question...". I want legitimate help that works :/ »
  This is done especially in the absence of details ("my game not start what to do?)
  in the original post.
  You have to start somewhere and the cut and paste is generally these steps which must always be taken. There are no shortcuts to troubleshooting, and assuming that "which can not be she" can lead to more frustration, especially after several hours of stuffing about to find that's all (* headbang *).
  It said that some of the answers cut and paste are not yet on the subject, but it is a
  Forum of the community of civilians, would be nice.

  Ok then.
  -You tried the 'quad cord fix? You don't need with a dual core cpu and use
  may be counterproductive. Like the game runs better on two hearts he can also help
  to disable hyperthreading on the cpu, that two "virtual" cores more equals four.
  -That you have installed the game using Vista sp1 compatibility mode. (Note I said installed)-
  -You have installed the Windows 7 codec pack to solve the problem of ffdshow, or used another
  method.
  -You have installed all Windows updates
  -The game has been patched and you have not yet installed mods.
  -You do not use Anti-aliasing, Bloom, HDR or V-sysnc (which use too many resources for your HD graphics card).
  -Do you have a pagefile (virtual memory) enabled?
  -What parts of the .ini correct you?

  Clean boot is a viable option for troubleshooting software conflicts are always a potential-
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Review the programs that you can run after you start in Windows as a potential
  Thus the conflicts. With minimum specifications, you need minimum stuff running while
  play the game. None of the browsers open, etc.
  Time to clean boot (or just by running msconfig) and clearing the check box next to
  any program in the Startup tab that you don't need to run in the background when loading Windows you can reduce the amount of resources used during the game.
  It may be a permanent framework. There are a lot of software that thinks it's important enough
  to start with Windows, do not...

  For more ideas try the forums Nexus-clicky and list in detail what you have tried,
  or risk all reread the same suggestions.

  You can also find something useful in the Guide to Tweak FO3 - TweakGuides.com
  .

• Windows Vista - unidentified network Local Access only tried everything please help

  Hello

  I have an Acer Aspire M1610 running Windows Vista Home Premium Service Pack 2 and 2 days ago when I turned it on the internet was not working and it says unidentified network Local access only. I use a wired Ethernet connection. I don't know how it happened as before I had used the computer as usual and the Internet worked very well. I did a lot of research and read a few forum posts about this problem and tried a few solutions but non of them worked. I tried the following:
  (1) disable my firewall and anti-virus who didn't work, I turned their back on immediately.

  2) press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type route delete 0.0.0.0 press ENTER.

  Type ipconfig/flushdns press enter

  Restart your computer.

  (3) the internet protocol version 6 clear, disable and enable the thing

  (4) if same Norton software removal tool I had uninstalled the when I got the computer I read that uninstall it by using uninstall windows is not entirely remove it.

  (5) another thing in the command prompt I don't remember exactly what it was, and I can't find the site Web is because I looked so much of.

  (6) I even reset my computer to factory settings and then uninstalled all unnecessary software and trials that come with and used the software again Norton removal tool.

  Does anyone know how to fix this? Any response will be greatly appreciated.

  Thank you

  Hi Alex,

  Have you tried to assign the IP addresses manually?

  I wish that refer you to this article-

  http://support.Microsoft.com/kb/928233/en-us

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Thank you.

• I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

  I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

  Honestly, this sounds like a problem of carrier. Are you able to make/receive calls or send and receive text messages? I would first check with the carrier to make sure that your phone is still set up to use mobile data. Something was accidentally deleted when they merged your bills.

• I just bought first elements13 and I installed it. But whenever I try to get my license number, an error message appears that says that my computer is not connected to the internet. I've tried everything. Help!

  I just bought first elements13 and I installed it. But whenever I try to get my license number, an error message appears that says that my computer is not connected to the internet. I've tried everything. Help!

  Check your hosts among other common problems, sign in, activation or connection errors. CS5.5 and later, Acrobat DC

• 38.0 my laptop is 100% slower. I've tried everything. HELP PLEASE

  I upgraded to 38.0 last night. now my laptop is 100% slower than 37. He can't stay with my typing as it always has. I've NEVER had this type of problem ever until I upgraded to 38.0. I also lost my bookmarks bar. I tried all the suggestions that the help page has to offer. Nothing helps. Everything else on my computer works great internet Explorer, I hate. My internet connection is the same and my McAfee Security Center does not detect any malware or viruses.38.0 has SLOWED to a CRAWL-LITERALLY. SO FRUSTRATED!

  I'm not a computer genius, but I know somethings thereon. I tried everything on your list for help and anything else I could think of to solve the problem... NO CHANCE! IT IS THE ONLY BROWSER THAT I LOVE. I AM BEYOND FRUSTRATED. I NEED FROM MY LAPTOP TO RUN AS ALLOWS IT BECAUSE IT'S MY PERSONAL COMPUTER AND WORK. PLEASE PLEASE PLEASE HELP ME!

  Time for a basic troubleshooting Firefox.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Windows XP SP3 Professional Edition problems with the Live Essentials tried almost EVERYTHING please help...

  I am running Windows XP Professional Edition and have tried almost way possible from almost all of the codes, so that it can install. He always tells me a different code almost as something it must not 'dismantling' MSE. I am not certified has + by all means! But I do not know when you searched for sites Microsoft etc., you are looking for better & learn yourself. But I'm at the point where I say "I wanted I had saved the old Version of the WLE who worked great." Just to give you a clue, which hopefully will help me can govern this list I've done on:

  1. search and read questions from other people who were identical and followed step by step, when I received him seemed to be more common error Code. He said to download update Windows Cleanup Utility and remove everything said Microsoft Live in there. I did this and it just via a different error Code

  2 I tried to download directly the WLE "integer" and install it

  3 I am the admin. and always "Ran under" admin

  4 I watched the system requirements & everything I had was compatible, even if I n "t SQL, but went and downloaded and installed, it

  5 I ran in safe mode, and keep in mind that I do every time a cleaning in the place where there is no trace of even the new WLE Installer, b/c I read learned that you cannot leave this trace.

  6 and to be honest, I do all this work b/c I think WLE possesses one of the in my opinion, best photo library it y a. quick, simple, but still has all of the improvements that I use direct mail and really liked the MS Outlook 07 connector is what I have right now.

  7 I've never seen a free software that is so sensitive that it need to go through all these steps

  -Thoughts on any other reasons to help, I would take even the older edition if I could find it, but as soon as I eliminated and did a cleanup & reinstall my hard drive, it hit me. I forgot to record the show and then, think it is free I'll get it online but it has been updated and I need help which is much smarter than me, I will not STOP until I know what and why. BTW, it is not a problem with a firewall or anything b/c I disabled Norton and am MSE tent which was / is child's play, it's not dirty space, but it does the job and it's great and that's why I want the photo gallery for the least and Sync Mail to Outlook.  As I have said that I have nothing else, I know to do, I even tried on another computer running the exact same OPS than mine. And it's the same way. ??? Please help me to get someone...

  Thank you very much in advance for any help other than that described previously, or if someone from Microsoft could remotely help me if it is possible.

  -CM-

  Hmm. check that you can start the Windows Installer service and it is enabled.

  1. Click Start > run...
  2. Type cmd /K net start MSIServer
  3. Press enter and monitor messages in the window of the console open.

  If the service is started successfully, then download the offline version of the WLE from here and try to install it. Select all items to install because they are dependent on each other.
  Download the new log file, if it fails to install again.

• Printer is no longer detected after installed new router. Tried everything. Help, please!

  I have a Photosmart 2575 printer which has worked well for several years.  It has a wired connection to my router.

  Recently, I installed a new router (sky fiber hub) and now the HP software (and any other software printer/scanner) are unable to detect the printer on my network.  It's strange, because my desktop (wired network connection) and my laptop (wireless network connection) can see the printer and I can install it using the standard features of windows 7.  I can also browse the built-in web server, so I know for sure that my printer is on my network and accessible.

  But despite numerous attempts to make the software HP Solution Center to work I am unable to print/scanning etc from this software.  I tried several different 'fixes' including full level 4 uninstall before reinstalling the software, reset the network settings on the printer, the printer remove everything on the network etc etc but nothing worked.

  I tried to use the printing software HP and doctor Scan, but this does not help.

  I'm totally perplexed by this apparent lack of connectivity.

  Can anyone help, please PLEASE!

  Alan Phillips

  Success in the end, but only after many hours of trawling through forums of HP and Microsoft, and many attempts to make the connection!

  But here's a summary of what I did for someone else with this question: -.

  1. I carefully removed all traces of what to do with my PC HP and unplugged the router of network printer.

  This requires many "level 4" uninstall to clear all installed previous falied and delete everything in the temporary file later: -.

  1. press the Windows key and the letter R
  2. tap folder
  3. press enter or click OK
  4. open the file 7z
  5 open the util folder
  6 open the folder of the ccc
  7. double-click on the Uninstall_L4

  2 using the control Panel_Programs and features, uninstall anything left that could be associated with HP

  3. perform a disk cleanup using Start_Accessories_System Tools_Disk cleaning and repeat this for system files

  4 Follwing the procedure found on the following link to check that the print queue is working, and that all the dependencies are "launched": -.

  Link to the message

  In this thread, there is a sequel of the procedure which requires opening a command prompt in administrator mode and enters the command line carefully

  dependent on the spooler of sc config = RPCSS
  (Note the space after the = not before)

  5 run msconfig.exe on the tab general, click on "selective startup", uncheck "Load Startup items", then on the services tab, hide all microsoft services and unselect all items [remember then to revive and return to a normal startup!]

  6. restart the PC

  7 disable Firewall [remember to activate later]

  8. start Internet Explorer (I had previously used Chrome)

  9 download AIO software from the HP Web site

  10. run and connect to the printer when you are asked (make a note of the IP address of the printer)

  11. the network printer was not found immediately, to do this, click Advanced and enter the IP address of the printer

  12 success - the printer was eventually detected and installed correctly.

• Stuck on Start Up Apple screen logo with 50% progress bar, tried everything. Help, please!

  Hello world. I'd appreciate it really all the advice that you can offer me to help me fix my laptop. I have a mid-2010 Pro 2.4 GHz Core 2 Duo Macbook running OS X Yosemite. A year ago, he started trolling a lot, so replaced the HDD with a Samsung 850 EVO 120 GB SSD internal 2.5 inch SATA III. He works much better since.

  A few days ago, I bought a Google Chromecast and had set up with my MBP. Subsequently, he began trolling and I noticed there are apps in the Launchpad, that I had never downloaded (reader of Google, Gmail, Youtube, etc.). I could not remove these applications or drag them to the trash. Concerned, I decided to back up my files on a USB key and re - install the OS X.

  However, during the priming of the MBP, it is stuck on the Apple logo screen, with the bar never go beyond 50%. (Photo: http://postimg.org/image/66qh6x633/)

  What I tried:

  PHASE 1 (Before reformatting)

  -Safe Mode: Button power button and shift held down. Hit or miss, worked 1-2 times, but when I reboot, is again stuck at the Apple logo.

  -Reinstall OS X: CMD + R; After 15-20 minutes get to OS X utility screen; Reinstalled OS X Yosemite; 7 hours to reinstall - but when the mbp restarts to complete the installation, it is stuck at the Apple logo again.

  -Reformatting: CMD + R; 15-20 minutes get to OS X utility screen (several reboots to work); Select repair for all discs/drives (Samsung SSD, HD Recovery). Exit said that both are very good; Select clear to HD recovery. When this was done, I tried to reinstall OS X Yosemite, but the MBP shuts down suddenly. When I turned on it again, it is returned to be stuck on the loading screen Apple logo. Attempt to restart after 15 +, but same result every time.

  PHASE 2 (After reformatting).

  -Power-> CMD + R = blocked screen Apple logo with 50% progress bar

  -Power-> Option = shows 2 player and free Wi - Fi area (Pic: http://postimg.org/image/58qi2j1vl/); Have you tried all the combinations, but regardless, always gets stuck at the screen of the Apple logo to 50% complete, after an hour, I suddenly hear ' to use English as the main language... ". ", but the screen is still stuck. I left it on 36 hours once and nothing has changed

  -Power-> Shift = error (Pic: http://postimg.org/image/tahklsvy1/); Keep restarting or shows some other error (Pic: http://postimg.org/image/thstc6b59/) and restart. Never crosses.

  Tried other things:

  -Reset PRAM: When restarting MBP, is stuck at the Apple logo screen, 50% progress bar

  -Reset SMC: Stuck on the Apple logo screen for a long time and then the screen turns off, but the laptop is still on. When I press Caps Lock, the indicator light lights up. Also, after some time, I again hear "to use English as...". "even if the screen is off. No matter what I press, it does not wake up to the screen.

  Note:

  -The bottom of the laptop feels hot (maybe), but I do not hear the drive in motion.

  I am trying to save my mbp because I can't get a new one for a few months. Any advice/help is greatly appreciated! Thank you very much!!!

  P.S.: I only am not too computer savvy, please use everyday words words/non-tech, when possible, thank you!

  Remove the SSD and install it in a closed Chamber.  Connect it to the MBP via USB.  It will start?

  Ciao.

• I need information on windows xp, I can't install Itunes. Has anyone dealt with ituneshelper.exe Itunes must be reinstalled Windows 7 error message? I've tried everything. Help, please!

  I have an ipod shuffle (first-generation) OLD. My system is Windows XP service pack 3. Computer behaving badly. If for any reason I can't install ITUNES without the error message 7 missing Itunes helper.exe need to reinstall Itunes. I tried many methods to address them. I can't use my IPOD or Itunes.  Please someon point me in the right direction. Thank you angella

  Hello

  · Brief us with the steps you tried to solve the problem.

  I see many users ITunes with the same concern. According the apple forums, this error is caused if SQLite3.dll is missing.

  For assistance on the issue I suggest you to post your query in the ITunes forum. Link: https://discussions.apple.com/community/itunes/itunes_for_windows

• Flash player does not recognize my password.  I've tried everything!  Help, please?

  I can't update flash player.  It does not recognize my password no matter what I do.  Help, please?

  This link can help you:

  What userid & password should I install Flash Player?

• My new phone is not connecting to iCloud change everything please help

  HI all I got an upgrade to an iPhone 4 s 6

  It arrived today and tonight I wanted to put all of this, I put everything in and he asked if I wanted to use my iCloud backup I said yes and signed,

  He came in saying he has no back up, so I can use iTunes or launch a new phone, I don't want to do it either I want to just connect to my iCloud and move it all around

  what I am doing wrong?

  Help, please

  Thanks in advance

  You made a backup of your iPhone 4S before you exchanged it? Because the iPhone 4s, this is where the backup comes at the beginning.

  See you soon,.

  GB

• How can I get to my gmail when I get an error message, I tried everything nothing helped

  Trying to access my gmail, I get the error that I need to enable cookies. Chrome menu does not have the options listed so impossible to change anything

  You should find an Options button in the '3' drop-down list in the Firefox menu button bar.
  This button is positioned at the right end of the Navigation bar

  You can also press the ALT key, or press F10 to display the Menu bar and go to tools > Options in this way.

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Also check the Cookie exceptions.