Webcam says "no camera device.

Similar Questions

• Satellite Pro L670 - 18F PSK3FE Webcam works become "unknown device".

  The * webcam * on my * Satellite Pro L670 - 18F PSK3FE * who is running * Windows 7 64 - Bit * a well worked until this week. My notifications bar started to say * "unknown USB device" * and when when I went to use the webcam it no longer worked.

  When I disabled the webcam in the BIOS the notification has stopped, but when I turned it on the notification came back again to the top. The unknown device is clearly the webcam.

  I updated my BIOS and tried the system restore.

  I also downloaded the driver for the webcam of http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK and have tried running that - + but it NEVER seems to complete the installation. + I have will continue to try to reload the driver and see if that helps, but from now on, I do not think that the pilot will help.

  If it is just a driver problem, someone could suggest how to get the driver to install really :-(

  I am now at a loss. I'm not sure what to do now. Suggestions?... + Please! +

  Hello

  Unknown device means that the driver is not installed.
  I think that the installation of the webcam driver should fix it.

  As face recognition also use the webcam, I recommend you to uninstall this tool as well as the older version of the software of the webcam.
  Both (or just face recognition) should appear in Control Panel-> software

  Now download both applications to the driver page.
  Start with the installation of the webcam driver:
  (1) unpack the webcam driver package

  (2) the TC30049700N.exe may also be decompressed (right click-> extract here)

  (3) now you should see different files exe, dll, and others attempt to run setup.exe to start the installation. If this does not work, go to Device Manager, mark (webcam) unknown USB device and install the driver pointing to the folder that contains the files of webcam driver. The system should automatically recover dll files.

  (4) restart the laptop and follow with face recognition software.

  Good luck

• pop up saying that a device is connected to my Imac with IP

  My iMac is completely compromised after having an intrusion on my internet router.

  I supported everthing this summer.  I tried to reset my IMac to factory settings.

  A pop up came in September saying that another device is connected to my internet

  connection with an IP address.  I called my provider of intellectual property, and they said it was a

  Xerox printer.  I don't have a Xerox printer.

  I followed all the steps in trying to get rid of malware and successfully, I think, to get rid of

  It is for 1 or 2 days.  But something else is in my system.

  Because I tried to protect my computer.  I'm changing my internet provider

  This week and I would like to hide my IP to my iMac.

  Hide my IP to my iMac when I'm on the internet?

  K

  Depending on your router model, there should be a way of

  disable DHCP.  It is a method used by the router to assign

  IP addresses on your local network when any device attempts

  connect you to it.  You can then manually assign IP addresses to only

  These devices that you want to have access to your router.

  If you haven't already done so, you must also change the password (and also

  username if the router required) to something else and much stronger.

  If it is always the default, with which it was delivered, anyone can understand this.

  In addition, if the router is a network capable wireless as well, you must disable the comments

  access and create stronger passwords.

  Also, make sure that all firewalls is enabled on devices and the

  router.

  As every router is different, you will need to check the manufacturer's instructions

  to make these changes.

• I need to reinstall my audio devices, it says no audio devices in the control panel

  original title: sound devices

  I need to reinstall my audio devices, it says no audio devices in the control panel

  Visit the website of your PC/Laptop manufacturer, search reference number and download then install specific drivers XP audioo. Alternatively, if you have a CD with the drivers that came with your computer, install it from there.

  See you soon,.

  Jerry

• I screwed up trying to install windows on my computer 10 and I XE off installer and now its says "no boot device - insert boot disk and press any key".

  I was just trying to download 10 on my computer windows using boot camp assistant. I answered the questions for windows when you need to respond as what kind of language you use and then I messed up on one of the questions. I didn't know how to go back so I just pressed the red x. When I did that he must get off my computer and when it's done I got a black screen and then it says "No boot device - insert boot disk and press any key" I don't know what he meant by no bootable disk and I was hoping that you guys can help me fix.

  If stop you your Mac and your power it back up and hold down the Alt/Option key, you see a Windows selection? If so try to select and see if the installation will continue.

• Webcam is displayed in devices and printers, but can not get turned on?

  Original title: webcam 270
  Webcam is displayed in devices and printers, but can not get turned on?

  Hello

  ·         What operating system do you use?

  ·         You're using a built-in or external webcam?

  ·         What is the brand and model of the webcam?

  ·         Were there recent changes made on the computer before the show?

  Method 1:

  I suggest you to check in Device Manager if you can detect the webcam. See the link below to open the Device Manager in windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

   

  Method 2:

  Try to update the drivers for the webcam from the manufacturing site and check if it works:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Use the hardware and devices Troubleshooter to fix the problem.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 4:

  I also suggest that you run the Microsoft fixit tool and check if that helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• my computer is saying no audio device, but I had her before

  I got my computer restarted after having a lot of junk removed. Since that my computer says no audio device. the operating system is xp it had sound before appreciated thanks this.help
  SF13

  Hello
  You can try to uninstall and reinstall the sound card drivers and check.
   
  Here are the steps:
  a. click on "Start" and "Control Panel". And then double-click "Administrative Tools" and "Computer management".
   
  b. choose "Device Manager" in the field on the left side of the screen.
   
  c. search for "audio, video and game controllers". Click on the plus sign (+) next to this field. This will develop a list of devices under sound, video and game controllers, which will include your sound card.
   
  d. right-click on your audio driver in the list, and then select "Update Driver".
   
  e. follow the instructions and Windows will automatically search for and install driver updates

• I just formatted my computer from ubuntu and installed Windows xp. And now I have no sound. It says "No. Audio Device.

  Original title: No Audio device

  So I just formatted my computer from ubuntu and Windows xp installed. And now I have no sound. It says "No. Audio Device. My integrated sound card is broken and so I 'card his Creative Labs SB0220.  I search for hours but couln can't find any solution.

  Hi Sannukas0016,

  Follow the suggestions below for a possible solution:

  Method 1: Run the fix it from the link below and check if this can help:

  Diagnose and automatically repair audio playback problems

  http://support.Microsoft.com/mats/NO_SOUND/en-us

  Method 2: You can also try the steps from the link below:

  There is no Audio playback after you install the Sound Blaster Live! Sound card

  http://support.Microsoft.com/kb/313022

  Hope this information helps.

• When I try to use Media player 11 or try to use live food of internet radio, I get nothing. When I search through the settings, I met a screen that says "no audio device".

  Original title: ideas: insert an error code or give a brief description of what you're trying to accomplish or difficult. _

  When I try to use Media player 11 or try to use live food of internet radio, I get nothing.  When I search through the settings, I met a screen that say, 'no audio device '.  I tried to update my card sound and nothing.

  Your help will be greatly appreciated.  If so, ask me questions and I will answer.

  Gary kenny

  theflyingelk

  (Number removed for privacy)
  

  (Email removed for privacy)
  

  Hi gary kenny,.
  1. when the question is is produced?
  2. the issue of 'No audio' intervene on other applications as well?
  3. What is the brand and model of your computer?
   
  Follow the steps and check if they help.
   
  Step 1:
   
  If you have HP and Compaq Windows XP computers, you can follow the steps mentioned in the article.
   
  No Audio in Windows XP device
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01427349&cc=us&DLC=en&LC=en
   
  Step 2:
   
  Or, you can uninstall and reinstall the sound drivers.
   
  a. click on START
  b. click Control Panel.
   
  You should have a few icons to come.
  If you do not, you must make sure that you have enabled the classic view.
   
  Locate the control panel option, it will be on the left side.
  Once activated the classic view
   
  Follow the rest of my instructions.
   
  c. click Device Manager
  d. sounds > search for your sound card (if you are not sure that your sound card is, post options and I'll tell you that one.)
  e. Note description brand / model, double-click on it, go to the tab drivers, note the version.
  f. make a right click on it and UNINSTALL it and restart the computer it will rebuild the driver stack.
  g. go to the manufacturers website and find the latest driver for your card download. (You must know the name of the sound card, if you wrote down from the above info), when you find it download: SAVE IT DO NOT HIT RUN (save it on your desktop for easy access.
  h. open the file that you have saved and right-click on it and select RUN AS ADMINISTRATOR(Now install it.). REBOOT after each installation of driver.
   
  Step 3:
   
  Sound drivers often rollback, so check that the version you just installed is always there. If not, the driver to keep until it sticks, it really shouldn't take more than three times
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• My Sprint HTC Android mobile phone connects with the supplied USB cable, but the computer says 'No HTC Device Connected'

  My Sprint HTC Android mobile phone connects with the USB cable, but the computer says 'No. HTC Device Connected' so I can't sync...

  Hello

  1. do you have HTC Manager installed on the computer?

  2. have you tried it with different USB ports?

  You need the HTC Sync HTC phone Manager software.

  Method 1: Try again with different USB ports and see if that helps.

   

  Method 2: If HTC Sync is installed, if you get the message "no device connected" in HTC Sync, ensure that your phone USB setting is changed to "Charge Only" to "HTC Sync".

  If the methods above do not help, you can contact HTC for additional help.

  Here is the link: http://www.htc.com/us/support/

• computer laptop Lenovo, but a red cross that pop up on the volume button and it s saying no audio device is intall

  I have a computer laptop lenovo, but a red cross that pop up on the volume button and it, s say no audio device is intall

  I want to know how can I solve this problem

  The following link might be worth a visit:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (Win XP / Vista / 7)

• Black screen showing F2 set up and start up F12 on the Vista Start menu and saying "no boot device."

  Original title: Windows Vista has stopped working

  I turn on the computer and Vista will not load.  Black screen that shows set up F2 and F12 boot menu.  Then after a few seconds it says: no boot device.   I know not if I reinstall vista with a disc, then it will be a new installation.  I lose all my files and documents?  Is it possible to recover?

  Hi Ladybel,

  You must contact the Local tech-store and check the hard disk for errors.

• I have hp laptop with built in webcam I went to Device Manager and it not on a day it is next day it not

  I have hp laptop with built in webcam I went to Device Manager and it not on a day it is next day it not

  Hello

  ·         What is the brand and model of your laptop?

  Method 1:

  Try running the fixit from the link next and if it helps: http://support.microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Try to update the drivers for your webcam and check if it helps: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

• Chicony webcam says its locked by another application

  the webcam integrated that came with my portal the way its locked by another application and I can't use it on anything, I can't understand what he's doing and how there to remedy, I got a usb webcam to try and it won't work either, presummable because the other does not, but I know the usb one works because it works on another computer , the only things I have opens when you try to use the webcam is msn and the internet, but I tried with everything closed and still no luck.

  Hello

  You probably have an application that runs at startup to lock the camera
  or who does not correctly release the camera after closing the application.

  =================================================================

  Reboot and then use the clean boot method to see if you can use a process
  elimination to determine the cause (it should be messenger or another program
  using the camera).

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• I tried to back up my hard disk but to halfway through it says I/O device error code: 0x8007045D.

  Original title: windows 7 backup of IO error 0x8007045D

  I tried to back up my hard disk but to halfway through it says I/O device error code: 0x8007045D.  I disabled mcafee to see if it was interfering, but that did not work.   I have an acer aspire laptop with windows 7.  I was not able to save anything.  Does anyone have any suggestions?

  Sheila,

  This can happen if your virus scanner (or another application of heavy disk activity) access to training. You can try running chkdsk in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If you run chkdsk in safe mode and you still have problems of backup, try to perform a clean boot to disable all third-party applications and test support upward:

  http://support.Microsoft.com/kb/929135

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.