WebCam works on my laptop

Similar Questions

• My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

  My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
  Although of course, the CD-ROM drive worked during the upgrade.
  I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
  PXE - E6i:Media Test Failure, Check Cable
  PXE - MOF: Exit PXE Rom
  During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
  Can someone help me please?
  Best regards
  John

  Besides what abdelhak says:

  The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

  Hope this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Re: Satellite A300 - how can I make the webcam work on Win7

  Hello everyone.

  I had Win Vista installed on this Satellite A300 and it worked well.
  I had no problem at all.

  Then I moved to Win7 and now I'm going through the test of the work of webcam.
  I tried to install all types of drivers, even those for A500, but it would be of no use.

  So, how can I make the webcam work on my A300?

  I've tried everything, even the installation of Ubuntu on this laptop and still it wouldn't work. If this is your interest, I'm under Win7 in Spanish, x 32, Home Edition.

  I really need your help here, please, I beg you, I spent 5 days ago almost try ANYTHING!
  And yet, I get the message after each installation/reboot of the: "the camara web esta disabled o ha Fall.» "Por favor, it check las web camara su configs", which would result in something like "the webcam is disabled or it has failed. Please check the configuration of your webcam. I've been browsing the forum for related issues, but I have not found any solution :(

  Thanks in advance,

  Ozma.

  Hello

  Seems the webcam software has not been installed correctly.
  That Win 7 OS do you use? 32-bit or 64-bit?

  Here you can find Chicony webcam driver for Win 7 64 bit
  http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091026100013.zip

  and here you can find Chicony webcam driver for Win 7 32 bit
  http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091023184836.zip

  Good luck

• Integrated webcam works rendered graphic not fail on Satellite P200D PSPBQE

  Good evening

  Model: Satellite P200D
  Modelnumber: PSPBQE-019002FR

  The WebCam built into the laptop (pilot: Chicony for Windows Vista 1.7.148.0720) never works properly.
  MSN I 'don' t see the WebCam and software companion says "rendering failed".
  From the beginning and before you install the Webcam software randomized behavior and it is very unpleasant.

  It is impossible that I'd be the only one with this problem.
  There only seems to be a bug in the hardware.
  So does anyone have a solution?

  Christos thanks and Merry Christmas on the forum

  Hello

  Can you please use the search option on this forum and put the webcam msn search terms. You will find a few interesting discussions on built in webcam and its use with different messengers.

  At a first check this one

  Good bye

• Webcam worked perfectly, the next day, image display is very dark

  Hello. I recently bought a HP Pavilion dv6 - 6113cl 2 days ago. The webcam worked perfectly with beautiful hd quality and nice lighting. I have nothing else than a window updates. some downloads. Now when I go on Skype or youcam. The display of the webcam is very dark. I have the brightness and it comes it more bright, but nothing like the quality as it was initially. I tried the update of drivers, uninstalling and reinstalling. Nothing seemed to work. This laptop is only 3 days old.

  I FOUND A SOLUTION!

  (1) go your CyberLink YouCam program

  2) go into your settings where you can change your brightness, contrast, etc. My YouCam is VIDEO ENHANCEMENT

  3) click on ADVANCED

  4) search for WHITE BALANCE and there will be a check box at the end which is not checked, CHECK IT

  (5) FIXED SOLUTION!

• Webcam works niet

  laptop MSI (webcam works niet?)

  Hello

  If you need help in your native language, see this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  On the top of this page click v (English) in the United States and set on your tongue.

  I hope this helps.

• Webcam works does not in my dell n5110

  It comes to my webcam on dell n5110. This problem has a bit of history. So far, the story is like this:

  The webcam worked perfectly for about a year. I have not used for about a month and then when I try to use Dell Webcam central application showed webcam not detected error. I tried other software like Skype and other chat tools webcam online, but the result was the same. Then I posted a similar message on this forum looking for an answer. People were really helpful and they gave me different types of tips and methods to try.

  I tried all. It was not all devices under imaging devices in Device Manager. There is no unknown devices listed either.

  I used dell troubleshooting tools both online and offline, they all said that there is no such device on your laptop. They did not have a clue on a webcam.

  I have re installed Dell webcam central software. But nothing has changed. I also removed all the usb devices on Device Manager and let them to be reinstalled. Yet, there is nothing.

  They advised me to Flash the bios. I tried, but the application was released showing "cannot Flash the bios to the same version. I tried to load the default settings in the bios.

  Then I removed the front panel of the laptop and unplugged and plugged cable connection webcam from the top as they said, it may be a bad connection. However, he did not a difference.

  Days like this and a few days later, when I turned on my lap, a new notification of pilot plant appeared and the USB device has been installed. And Yes, this is the driver for the webcam. Webcam was working fine. I ran the test on the application dell several times and webcam passed between them all the time. It was just like new. But it was not consistent. Webcam disappear suddenly as in the first case, leaving no clue as to what happened and then came back in the same way as before. I don't know what caused the web cam to do. This happened several times.

  Now, it's the history of the problem.

  • He worked like that for about three months. And now the webcam didn't go back a month. I think on the replacement of the webcam. The question is whether it will solve my problem?
  • What are the symptoms of a hardware failure? Only, I checked the connection of the cable to the module of webcam. Can there be a bad connection at the other end of the cable?

  Also, I believe that the network of microphones is also in the webcam module. It worked very well, even when the webcam was missing. And it still works very well.

  • Webcam and microphone two separate units or they come together?
  • The connection of microphone array goes through the same cable from the webcam? If this is the case, the possibility of a failure of the webcam because of the bad connection may be cancelled?

  A lot of questions. I waiting for your good advice.

  Thank you

  Hi pavan_m4,

  Thank you for your patience and all the troubleshooting steps to solve the problem. I suspect it is the hardware problem. Given that the camera worked after the new update of driver, try to restore the system to factory State. Back up the data before you restore the computer. Please click on the link for Windows 7 PC Restore:

  http://Dell.to/15DfFoj

  In case the problem persists even after PC Restore, you can consider replacing the Webcam. Camera and microphone cable are integrated and it is a single cable.

• 40.0 Firefox works fine on laptop with Windows 10. Horrible on my desk. What gives?

  My wife's cell phone was the upgrade of Windows 10. 40.0 Firefox works fine on the laptop. I have a desktop PC newer than the laptop, which also has the upgrade of Windows 10 which is four years. I still have problems with the bar doesn't show is not the X to close and no reduction in title or maximize buttons. If I go to full screen I get the title bar, but it's on my tab bar. Pages on the desktop do not render correctly. Part of the page is missing. I uninstalled and reinstalled 40,0 3 times, same problem. Why it would work on a laptop five year old and not on a desktop years? It is not sensible. I guess 40.0 is a work in progress?

  I made an update of Firefox. Problem solved.

• How to access my webcam on a computer laptop g72-c55dx

  I have a webcam hp on my laptop G72 - C555DX how can I access it. With a new HDD complicate or make it difficult?

  Hello

  If you haven't already, download and install Cyberlink YouCam from the following link.

  http://ftp.HP.com/pub/SoftPaq/sp54001-54500/sp54246.exe

  Kind regards

  DP - K

• I changed my apple ID password. I restarted my computer and my iphone. My new password works with my laptop, but not my iphone.

  I changed my apple ID password. I restarted my laptop and my iphone. My new password works on my laptop but not on my iphone, I can't update my applications.

  iowaoma wrote:

  I changed my apple ID password. I restarted my laptop and my iphone. My new password works on my laptop but not on my iphone, I can't update my applications.

  Apps are tied to apple id and password that was used to download/purchase it.

  Try your old password and see if you can update or not.

• T400 built-in webcam work under linux?

  Hello

  Does anyone know wehther T400 integrated webcam working under linux or not?

  Thank you

  I use a Y410 with OpenSUSE11.0, it supports my webcam, very good and better than Windows...

  As you said nothing about the linux distribution that you are using, I suggest you go to OpenSUSE11.0 and I hope that your webcam should work fine...

  Hope this helps you pal...

  The webcam software used in open SUSE11.0,'s 'CHEESE', it should be available for other distributions as well...

• Satellite P200-13Z - how to make webcam work?

  Help, please.
  I've had this machine for 2 months and cannot find out how to make the webcam works.
  I've been in Device Manager that says that the cam doesn't work and I have the right drivers. What should I do now?

  Hello

  At first, I think you have Satellite L30 and not wx30. Am I right about that?

  Sorry my friend, but how to help if you didn't write what webcam you want to use. At this point, I can just read to you by s manuals you have with your cam and make sure that it is installed correctly.

  You have installed an application for the use of the webcam or you try to use it with a messaging like MSN, ICQ or Skype?

• SSD works with my laptop

  The laptop I have is only a 125 GB SSD hard drive. I got it in 2012 on Christmas day, the hard disk is almost full. I want to upgrade to a HD 1 TB in size, I found some online. I wonder that it would work with my laptop? Please let me know

  https://www.Google.com/shopping/product/16928822856760932460?q=1TB+MacBook+Pro+S SD + end + 2012 espv = 2 & biw = 1280 & bih = 629 & bav...

  OR

  https://www.Google.com/shopping/product/2461939494845446997?q=1TB+MacBook+Pro+SS J + end + 2012 espv = 2 & biw = 1280 & bih = 629 & bav =...

  If none of these works will let me know/direct me to one that will work with my laptop

  INFO:

  13 "retina Display

  2.5 GHZ

  8 GB 1600 MHz DDR3

  Intel Graphics 4000 1536 MB

  Series # C0 * R53

  The two links are the same blade SSD. The later a (more expensive) incudes and closure that allows you to use the blade SSD to the computer through the USB port connected pregnant.

  The speaker make it easy to clone the existing to the new SSD, test the new cloned SSSD, and then make the Exchange.

  Here's the video of OWC to make the Exchange.

  http://eShop.MacSales.com/installvideos/macbookpro_13_retinadisplay_late12_unibo dy_ssd.

  For the future, not it's desktop Mac Pro forum.

• Microsoft Silverlight, Flash Player etc. are installed, but do not seem to work on my laptop

  Microsoft Silverlight, Flash Player etc. are installed, but do not seem to work on my laptop Pavilion dv6. What should I do to him? Have no idea of computers!

  Moved from feedback

  Original title: System Update updates microsoft windows

  Hello

  I suggest you check out the link uninstall Silverlight completely and re-install:

  Uninstall previous versions of Silverlight on Windows

  http://www.Microsoft.com/getSilverlight/get-started/install/uninstall-win.aspx

  Also check out the link to install Microsoft Silverlight:

  Download Microsoft Silverlight

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  If the problem is not resolved, please answer and we will be happy to help you.

• mouse Pro m5769 it can work on a laptop

  The oldest is Pro mouse model M 5769 with USB cord have an option for execution on a PC?  Specifically, a Dell 15r.  Thank you!

  Hello

  Unfortunately, Apple pro mouse m5769 does not work with dell laptop or desktop.

  For more information, you can contact apple.

  It will be useful.