Websites displaying properly since the upgrade to 10.0 FF

Similar Questions

• 3D photo restores do not properly since the upgrade

  I developed an application in labview 2012 and have recently updated until 2014.

  Since this upgrade, I have a problem with my 3d image rendered incorrectly.

  I am attaching the images as it is difficult to describe the problem. There should be 4 of robot arm placed on the corners of a gray box that is placed slightly above the ground. The image with the removed soil that shows the best, but it is obviously incorrect. Remove objects and textures can give better results in some respects, but the question is always present whenever I changed something.

  It seems that parts of models are not rendered or sections are not rendered in the correct order, but I'm not aware of all the properties change this.

  I tried to change the clip plain but documentation is very limited and I doubt that's the problem anyway as the middle of the image which is incorrect, the floor and the ends of the robots never seem to cut.

  I am running Labview Robotics 2014 and using the Robotics Toolbox to generate arms on Windows 7 64 bit with nvidea GeForce GTX 760 graphics card.

  Any help is appreciated.

  Thank you

  Nick

  I experienced similar problems with the rendering window. I feel quite informal and subjective, it is that the render window is something that NEITHER is not updated with the latest improvements in graphics cards, and having developers use real 3D image controls instead.

  I experimentally tested the 3D picture control and I can't see any advantage of the render window of performance compared to the 3D so image my, yet unofficial, impression is that image 3D controls are hardware accelerated now but it is not clearly stated in the documentation for LabVIEW.

  You can put a window on a façade of VI 3D and select in the context menu 'Fit control component' and create a window similar to the rendering window. It requires a little more programming, but you get a lot more flexibility for your application.

  If you are interested, join the Group Vision 3D!

• Since the upgrade to IOS 9.3.1 my Telstra sim displays no Service every time that I reboot.

  Since the upgrade for my iOS 9.3.1 iPad2 my Telstra sim displays no Service every time that I reboot. I contacted Telstra and they sent a signal to the Tower closest to you. However, every time that I reboot I remove the sim card and then reinsert it. I then get a complete service.

  Network settings may be damaged after an update of iOS.

  Tap settings > general > reset > reset network settings

  Then restart your iPad.

• Pe11 complains about the inconsistent display HD 3000 driver since the upgrade to Windows 10

  Hello

  I am running PE11 on a laptop Dell Inspiron N5110 with integrated graphic HD3000 and Nvidia GT525M graphics card. Pe11 is configured to use the integrated graphics (it doesn't seem to work at all with the GT525M).

  Pe11 run fine under Windows 7, but since the upgrade to Windows 10 I get this message when I start PE11:

  

  I can not find BadDrivers.txt anywhere on my system (despite the display of hidden files).  So, how can I resolve this you problem?

  Best regards

  David

  Where did you get the BadDriver.txt file?

  You will certainly find it in the C/ProgramData/Adobe/Premiere elements/11.0

  But make sure that you first install the latest Intel Graphics Driver of

  Download graphic drivers Intel® Windows® 10 [15.40] [4th Gen]

• Could not open the games in the emails of AARP since the upgrade to Windows 8

  I used to be able to open the games of my emails of AARP, but since the upgrade to Windows 8, I can't it is no longer.  I get a message "this page cannot be displayed".  When I click on "Fix connection problem", it tells me that there is no connection problem.  I plugged directly on the website of AARP and still failed to open the games on my computer.  What is Windows 8 to prevent me from opening of the games and how we can solve this problem?

  This message means that the site is having a problem.  There is nothing you can do on your end to fix it, and it is not a problem with Windows 8.

• Since the upgrade to 2015 CC and change my site to a paid site, can my customers is more updated of the site through the browser update. When they try, parts and pieces of the site appear and they can see what it takes to update. It's about to make me los

  Since the upgrade to 2015 CC and change my site to a paid site, can my customers is more updated of the site through the browser update. When they try, parts and pieces of the site appear and they can see what it takes to update. It's about to make me lose my client. Help, please.

  We have identified two questions:

  (1) muse implements a markup bad comment, causing in the edition (IBE) browser to display the page properly. Only, this affects IBE and does not affect the published site. The combination of page that causes the bad markup is still TBD.

  (2) IBE does not account for the bad markup that leads to incorrect DOM, leaving IBE unusable.

  We have a fix for IBE (as BC) who is ready to be tested. We will update this thread when the fix is on.

  Sorry for the inconvenience.

  Jason San Jose

• Since the upgrade to 10.11.4 won't open my app store.

  Since the upgrade to 10.11.4 will not load the app store my mac icon. It opens, but all I get is a spinning wheel.

  Please test after taking each of the steps that you have not already tried it. Stop when the problem is resolved. Back up all data before making any changes.

  Sometimes, the cause of the problem may be an Apple network, whereby failure cases none of the steps below will have no effect. You just have to wait for the failure be fixed. This should rarely, if ever, take more than a few hours.

  Step 1

  Connect to the App Store by selecting Sign In in the Store menu. If you are already connected, disconnect and then reconnect.

  Step 2

  Remove or disable "Little Snitch", or any other third party software like that blocks outbound connections to network, in accordance with the instructions of the developer.

  Step 3

  In the menu bar, select

   ▹ System Preferences... ▹ Network

  If the preferences window is locked, click the lock icon in the lower left corner and enter your password to unlock it. Click the Advanced button, and then select the Proxies tab. If any proxy are selected, make a note of and then deselect them. You need not change the bypass or the FTP settings. Click OK, and then apply. Test. The result may be that you can not connect to any web server. Restore the previous settings if necessary.

  Step 4

  Log off or restart the computer.

  Step 5

  Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  After testing, restart as usual (not in safe mode).

  Step 6

  If possible, connect to a different network and test.

  Step 7

  Reset the NVRAM.

• Mac has been freezing since the upgrade to El Capitan

  My mac froze just (since the upgrade to El Capitan) still today while on the internet. Has written on this subject before and submitted to the reading of the Console application, but there was no response.

  Message on the console of today reads:

  In the menu of Queries/All Messages to the system log:

  29/03/16 12:10:13.234 PM ReportCrash [7149]: call to spindump for pid = 7118 wakeups_rate = 155 duration = 291 because of excessive Awakenings

  The diagnosis and use of Messages:

  29/03/16 12:10:14.222 PM spindump [668]: com.apple.message.domain: com.apple.crashreporter.writereport.wakeups_resource.diag

  com Apple.message.signature: com.apple.WebKit.Plugin.64

  com Apple.message.signature2: UNBUNDLED | 11601 (11601.5.17.1) ((null))

  com Apple.message.signature3: alarm clocks

  com Apple.message.Result: noop

  com Apple.message.summarize: YES

  SenderMachUUID: 63E4F244-A146-3809-8016-6172E1C11CB1

  Any help would be most appreciated.

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the recovery HD immediately after the chime press keys control and R that the Utility Menu appears. Choose disk utility and click on the button continue. Select the withdrawal (usually Macintosh HD) volume entry of the list to one side.  Click first aid button in the toolbar. Hold the button brings up. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click continue.
  6. Download and install updated Combo OS X El Capitan 10.11.4.

• No sound through your desktop since the upgrade to OSX10.11.2

  No sound through your desktop since the upgrade to OSX10.11.2

  There are several possible reasons for the release of its failure. Please take each of the following steps that you have not already tried it. Some may not apply to your model. Stop when the problem is resolved.

  Back up all data before making any changes.

  1. start by the steps recommended in this support article. Do not skip any step. It is the starting point for further efforts fix.

  2 make sure that you have an installation fully updated to Mac OS X.

  3. If you have installed an application called 'Own memory' or any other third party software that is supposed to 'clean' or 'purge' memory automatically, remove it according to the instructions of the developer and restart. You should do this even if the software is not causing the problem, because it is useless.

  4. other third party which has been reported to interfere with an audio software includes the "Boom" and "Samsung Kies". If necessary, uninstall instructions of the developer (not not by dragging something in the trash.)

  5. If a device AirPlay is selected for the audio release of iTunes (or other applications via third party software such as "Wing"), deselect it.

  6. launch the application 'Setting up Audio and MIDI' by entering the first letters of his name in a Spotlight search and by selecting it in the results (it should be at the top). Select output integrated in the list on the left. If the mute boxes are checked, then.

  7. If a red light is visible in the port of audio when its must play, the internal switch is stuck in the position of the digital display. You may be able to release it by inserting and removing of a mini stereo plug of adequate size. If this is not the case, the machine needs to be repaired. Insert any kind of tool in the port can cause damage that is not covered by the warranty.

  If there is no red light, the switch can always be locked in the position of the helmet. Try to clear the same way.

  8 disconnect all devices wired except the keyboard and mouse, as appropriate. If more than one display is connected, unplug all the extra zeros. Restart and test.

  9. If you have a MacBook Air, turn Bluetooth off and restart.

  10 start in safe mode. Do not open a session; Just restart as usual when the login screen appears. When you do, make sure that the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and the sound does not work.

  11. reset the NVRAM.

  12. Reset the SMC.

  13. triple - click anywhere in the line below on this page to select this option:

  /Library/Preferences/Audio

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Move selected item to the trash. You may be prompted for administrator login password. Restart the computer and empty the trash. Re-create your settings in the sound preferences panel.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  14. reinstall OS X after you back up all data.

  15. an appointment of 'Genius' in an Apple store.

• OfficeJet HO 5742: I have HP Officejet 5742 and since the upgrade to Windows 10 I can't scan.

  Since the upgrade to Windows 10 I can't scan. The printer indicates this computer not connected, but I can always copy and print.

  Thank you rb011. I used the print and scan doctor and he pointed me in the right direction. The solution is to uninstall the printer and reinstall the drivers updated from the HP website. Everything is ok now. Thanks again.

• Dell Studio 1737: Availability of Bluetooth absent since the upgrade

  Dell PU705 5 Bluetooth travel mouse button do not interact with the screen since the upgrade to Windows 10. There is no Bluetooth icon in Device Manager. I updated all the drivers and hardware and downloaded all Windows 10 Microsoft updates. Looking for solutions, it seems that many similar problems - for quite a long time - without definitive answers.

  Hello

  Thanks for the update and my apologies for the lack of communication.

  Unfortunately, I could check the Dell website for the same model support ( DELL Studio 1737)that you are using is not compatible with Windows 10.

  Please visit the below mentioned link by Dell.

  "Product not tested for upgrade of Windows 10

  Dell is not stable or develop Windows 10 drivers for this product. "If you choose to upgrade, some features, applications and connected devices may not work as expected."

  http://www.Dell.com/support/home/in/en/indhs1/product-support/product/Studio-1737/diagnose

  Hope this information is useful.

• I use the SAGE software but can't view or print all reports since the upgrade to Windows 7

  I use the SAGE software but can't view or print all reports since the upgrade my laptop to windows 7.

  Is there something in windows 7 that is in conflict with SAGE software and if so is there a download available that will fix it

  It is common for accounting packages to must be run as an administrator (essentially because the companies are too lazy to properly program).

  Try first - then approach wise for assistance.

• Number keys don't work since the upgrade from vista to windows, anyone know why?

  Numbers on my laptop keyboard keys don't work since the upgrade from vista to windows7, anyone know why? Keys of numbers very well work in office and other software for browsers

  See the following troubleshooting steps below thanks Azam K with Microsoft Support:

  Try to activate the numeric keypad and check if it helps, here are the steps:

  1. open on-screen keyboard by clicking theStart button,all programs, Accessories, easy accessand then clickingOn-screen Keyboard.

  2. click onOptions, check thepad box and then clickOK.

  I also suggest you to start the computer using safe mode and check if it works properly, following the steps:

  1 restart your computer if it is running.
  2. tap on the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Boot Options, you can stop tapping.
  4. use the up/down arrow keys to highlight your selection.
  5. select Safe Mode and press ENTER.
  6. you should see loading drivers and wait please.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If it works fine in Safe Mode, then try to perform the audit and the clean boot, here's the link:

  http://support.Microsoft.com/kb/929135

  If it is not working in Mode without failure, then try the System File Checker and see if it helps, here are the steps:

  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. click on continue or provide administrator credentials if prompted.
  3. in the command prompt window, type the following text, and then press ENTER:
  sfc/scannow

  Here is an article that will give you information about Scan SFC:
  http://support.Microsoft.com/kb/936212

  I hope this helps!

  OT

  Change options for accessibility on Windows 7
  Control Panel
  l---> ease of access Center
  I---> make the keyboard easier to use
  I---> uncheck "turn on mouse keys.

• Update panels does not properly since the 2015.2.1

  My sidebar panels does not work properly since the update. Hit the tab key does not hide the sidebar: sidebar remains visible. Also, sometimes I can't access the menu bar, or change view (shift f command).

  On the retina mi Macbook Pro, OS X 10.11 2015.

  I drove back to 6 and are no longer problems. Any suggestions on how to upgrade to the current version without problems?

  Make sure that you are on 6.1.1 the latest stable version.  Help > system information to check your version.  See these instructions if you are not on 6.1.1: http://www.lightroomqueen.com/how-do-i-roll-back-to-lightroom-2015-1-1-or-lightroom-6-1-1/.  6.1.1 LR has some important bug fixes to 6.0 which has affected a large number of people.

  Adobe has apologized for the mess in LR CC 2015.2 / 6.2: update of Lightroom 6.2 Release and apologies, update of Lightroom Import 6.2. So don't waste your time trying to get 6.2.1 work - wait for 6.3 and let others do the beta testing.

• Since the upgrade to 11.0.11, document relative cross links when viewing the PDF in the browser don't work is no longer

  I maintain a web application that contains hundreds of PDF files that contain relative links, among other documents.  The application relies on getting the Base URL of the Adobe Acrobat web plug-in to navigate between different PDF documents while viewing in the browser (the links do not work in a standalone Acrobat window).  Since the upgrade to Adobe Acrobat Reader 11.0.11 last week, these links no longer function (I checked they still work in 11.0.10).  I also have the same problem in Acrobat 10.1.14 (worked in 10.1.13).  I have tried all the other versions.  It seems that updates broke the functionality of our application invoked for the past ten years.  Any help would be greatly appreciated.

  It is a change that seems to work for Adobe Reader 11.0.11 but I can't find any documentation / web post of what he does.

  One would have details of these entries to registry FeatureState?

  HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\Acrobat Reader\11.0\FeatureState

  3836776 = DWORD: 00000000

  I also have Internet< display="" in="" read="" mode="" by="" default="" disabled="">

  HKCU\Software\Adobe\Acrobat Reader\11.0\AVGeneral

  bBrowserDisplayInReadMode = DWORD: 00000000

  For 10.1.14 I found that follows would work, but same as above no documentation or approval from Adobe.

  HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\Acrobat Reader\10.0\FeatureState

  3836774 = DWORD: 00000000