Weird error in Console after reboot ESX 4.1

Similar Questions

• Impossible to mistake panic Kernel MOUNT after reboot ESX host...

  I built three ESX host without problem and then I rebooted one of them and got the following error: any ideas?

  Unable to mount: Kernel Panic: VFS: unable to mount root FS 00:00

  kernel 0xC0100000, data 0xc038d00 s .bss 0xc0443380

  the other two hosts works fine?

  is perhaps a controller failure: could you try to reinstall ESX default to do so and see if he do the same?

  If you are sure that this is not a breaking test HW following this link http://vikashkumarroy.blogspot.com/2008/09/how-to-fix-unable-to-mount-root-fs.html

  HTH

  \aleph0

  ____________________________

  http://virtualaleph.blogspot.com/

  http://vmusergroupitalia.blogspot.com/ (in Italian)

  ###############

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

• ESXi 5.5 build 2456374 is unable to reconnect to the vcenter after reboot

  Hello

  Have been hitting my head against it for the past few weeks. A host that has worked very well to a previous 5.5 build fails to reconnect to the vcenter after reboot once upgraded to build the 2456374. This also happens to the newly built guest. When a reconnection is started manually, it produces up to 80% (data of the host processing), then dies with a "general system error: internal error. I tried to remove the vpxa account, resetting the config network via the console, Cup NIC of the vswitch, removal of additional interfaces vkernel. The network via the console configuration reset allows me to reconfigure the net and tie vcenter and complete the host host configuration. However, as soon as I restart the host, is no longer, it reconnects to vcenter and I'm back where I started.

  Unfortunately, this is not a 100% event. If I rebuild a host enough times, one of the new buildings will finally works correctly.

  any ideas on how to solve this problem would be appreciated.

  Elmārs

  QUESTION REOLVED!

  Ok. so that was the easy part. Open a folder with vmware to identify the cause for this. After much digging, friction, pull hair, we found a clue in the hostd.log on the ESXi host.

  2015-04 - T 02, 04: 49:05.481Z [23381 B 70 error 'Hostsvc.NetworkProvider' user opID=HB-host-185064@917-1d029f4d-d2 = vpxuser] an error occurred during extraction of stack instance configuration: incompatible value of ccalgo for the Netstack instance: defaultTcpipStack.

  In my network performance test I did recently, I have significantly improved network iSCSI performance from the cubes NewReno network congestion control algorithm. For each of these hosts, as part of the installation procedure I now set the control algorithm of congestion on cube through the web interface. Finally, it is a little bug with that VMware believed fixed. Is not.

  To confirm doubling you encounter this problem, connect to the host (ssh or remote cli) and run the following command:

  list of esxcli ip network netstack

  You should get a message saying that there is an inconsistency in the netstack configuration.

  To fix, run the following command:

  esxcli network ip put netstack defaultTcpipStack cubic n - c

  the netstack from above list command should now display detailed information and will now be able to connect to vcenter.

  If I understand correctly, an article will be published on this in the near future.

• WebLogic Admin server fails to start after reboot

  Hi gurus,
  
  WebLogic Admin server starts after a reboot of the server. Note that weblogic has graciously stopped before restarting.
  
  Also note that the following files have been accidentally deleted after reboot (but I don't think that that should cause a problem..):
  / opt/Shared/Apps/Hyperion/Oracle/middleware/user_projects/Domains/EPMSystem/Servers/adminserver/Data/Store/default/_WLS_ADMINSERVER000000. DAT
  / opt/Shared/Apps/Hyperion/Oracle/middleware/user_projects/Domains/EPMSystem/Servers/adminserver/Data/Store/Diagnostics/WLS_DIAGNOSTICS000000. DAT
  
  
  Looking at the AdminServer.log:
  
  
  * # < 11 October 2012 11:27:53 CEST > < critical > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969273846 > < BEA-000386 > < server subsystem failed. Reason: java.lang.AssertionError: weblogic.management.provider.EditFailedException: *.
  java.lang.AssertionError: weblogic.management.provider.EditFailedException:
  to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON. < init > (DomainRuntimeServiceMBeanImpl.java:79)
  to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON.getInstance (DomainRuntimeServiceMBeanImpl.java:68)
  at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
  at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
  to weblogic.management.deploy.internal.DeploymentManagerImpl. < init > (DeploymentManagerImpl.java:83)
  at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
  at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:233)
  at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:155)
  at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:27)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  Caused by: weblogic.management.provider.EditFailedException:
  at weblogic.management.provider.internal.EditAccessImpl.ensureBeanTreeLoaded(EditAccessImpl.java:1754)
  at weblogic.management.provider.internal.EditAccessImpl.getCurrentDomainBean(EditAccessImpl.java:241)
  to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON. < init > (DomainRuntimeServiceMBeanImpl.java:76)
  to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON.getInstance (DomainRuntimeServiceMBeanImpl.java:68)
  at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
  at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
  to weblogic.management.deploy.internal.DeploymentManagerImpl. < init > (DeploymentManagerImpl.java:83)
  at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
  at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:233)
  at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:155)
  at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:27)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  Caused by: org.xml.sax.SAXParseException: premature end of file.
  at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:195)
  at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.fatalError(ErrorHandlerWrapper.java:174)
  at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:388)
  at com.sun.org.apache.xerces.internal.impl.XMLScanner.reportFatalError(XMLScanner.java:1414)
  to com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$ PrologDriver.next (XMLDocumentScannerImpl.java:1059)
  at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648)
  at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScannerImpl.java:140)
  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:511)
  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:808)
  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737)
  at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
  at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:235)
  at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:284)
  at weblogic.xml.jaxp.RegistryDocumentBuilder.parse(RegistryDocumentBuilder.java:163)
  at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
  at weblogic.management.provider.internal.ConfigReader.convert(ConfigReader.java:106)
  to weblogic.management.provider.internal.ConfigReader. < init > (ConfigReader.java:70)
  to weblogic.management.provider.internal.ConfigReader. < init > (ConfigReader.java:64)
  at weblogic.management.provider.internal.EditAccessImpl.loadBeanTree(EditAccessImpl.java:1917)
  at weblogic.management.provider.internal.EditAccessImpl.loadBeanTreeFromPending(EditAccessImpl.java:1807)
  at weblogic.management.provider.internal.EditAccessImpl.ensureBeanTreeLoaded(EditAccessImpl.java:1740)
  at weblogic.management.provider.internal.EditAccessImpl.getCurrentDomainBean(EditAccessImpl.java:241)
  to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON. < init > (DomainRuntimeServiceMBeanImpl.java:76)
  to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON.getInstance (DomainRuntimeServiceMBeanImpl.java:68)
  at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
  at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
  to weblogic.management.deploy.internal.DeploymentManagerImpl. < init > (DeploymentManagerImpl.java:81)
  at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
  at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:232)
  at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:154)
  at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:26)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  
  
  # < 11 October 2012 11:27:54 AM EDT > < opinion > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274051 > < BEA-000365 > < changed failed State Server >
  # < 11 October 2012 11:27:54 AM EDT > < error > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274053 > < BEA-000383 > < is not an essential service. The server will shut down >
  # < 11 October 2012 11:27:54 AM EDT > < opinion > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274069 > < BEA-000365 > < server status changed to FORCE_SHUTTING_DOWN >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JMX > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274138 > < BEA-149513 > < JMX Connector Server stopped at service: jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.domainruntime. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JMX > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274140 > < BEA-149513 > < JMX Connector Server stopped at service: jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.edit. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JMX > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274141 > < BEA-149513 > < JMX Connector Server stopped at service: jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.runtime. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < WebService > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274146 > < BEA-220028 > < Web Service reliable agents are suspended. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < WebService > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274153 > < BEA-220029 > < Web Service reliable agents are shut down. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < MessagingBridge > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274318 > < BEA-200001 > < messaging bridge has shut down successfully. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JMS > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274426 > < BEA-040308 > < service JMS suspends >.
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JMS > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274506 > < BEA-040107 > < 8 cancelled by default connection factories. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JMS > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274510 > < BEA-040015 > < stop JMS is done >.
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JDBC > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274530 > < BEA-001144 > < Force suspending the JDBC service. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JDBC > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274536 > < BEA-001146 > < Force suspend the JDBC service finished >.
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JDBC > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274538 > < BEA-001147 > < JDBC service stop. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JDBC > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274552 > < BEA-001149 > < stopping the completed JDBC service >.
  # < 11 October 2012 11:27:54 AM EDT > < Info > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274694 > < BEA-000236 > < stop run > discussions.
  .....
  
  
  Kindly guide me with this. Thank you!
  
  Published by: Kent Pawar. October 11, 2012 08:51

  It is:

  Caused by: weblogic.management.provider.EditFailedException:

  A likely reason may be a few changes in the config.xml file. If you have a previous backup of the config.xml file, then try to replace the config.xml file, and then restart the server.
  Another reason for this exception maybe it were completely a few changes to the configuration through the administration Console that were not activated and the server administrator has been restarted. According to this scenario, weblogic will create a dir /pendig and have a config.xml file is created with the changes unchecked.

  a solution of workaround that you can try to restore the management server:

  Under domain dir.
  \pending directory - take backup and delete the directory.

  Under Dir Admin Server:
  data\store - take backup and delete the directory.

  Thank you
  Sandeep

• Ping IP of ESXi host fails after reboot? Newbie

  VMWare ESXi 4.0.0 ReleaseBuild 171294 - HP ProLiant DL360 G4

  The server turned craps so we got a used that even make and model and shared disks.  Now we cannot connect with the customer and we cannot ping, ping times out.  When we ping from the console we get inconsistent results, can ping ok, the first IP addy and then fails on the second ping, or it connects to the second IP addy, but fails to ping first that it resolve the hostname constantly.  We stopped and started the management network and Management Agents a couple of times but no joy.

  I have the Articles KB 1008446 ping to the ESXi host IP fails after reboot, 1003490 restart the Management Agents on an ESX or ESXi Server and 1003677 Tech Support Mode of emergency support.

  What must we do to recover the server to an operational state? If there is other information needed to help us please let me know.

  And, what distro and version is ESXi 4.0.0 inspires?  I read that it is Redhat, but I couldn't find the version.

  I have worked with Soloris, Linux and Aix over the years, so I am comfortable working from the cmd line if need be.

  Thank you

  ESXi is not Linux. The VMkernel is VMware. The small console that runs the VMkernel is busybox. ESX has a VM management based on RedHat 5, but here again the VMkernel is all VMware.

  I would check that the embedded NICs are working properly. Start with a linux rescue disk and test.

  If all extracted would reset the system configuration from the yellow Console screen. Your configuration will be lost, but your machines virtual etc. will be OK. You will need to add to the inventory.

• Not ready external hard drives after reboot

  You have a weird question, or perhaps I should say one on that I can't find something. I've dealt with it for years and finally had enough of it. Rarely, I restart my Mac, do not need, is not something that happens often. But on the question.

  I have an iMac of 2015, internal SSD, or merge, I suppose, and a couple of external hard drives attached. Both are 4TB readers, by USB (for backups) and FireWire (for data, applications, iTunes library, photos, etc.). Both work perfectly during normal use.

  The question is when I reboot. My hunch is that these external drives are not fill their mental health checks / faster the drive internal system files, and when the OS is logged in, all the stuff on my external drives (in this case, my iTunes library) is not found. Of course, everything I do is point iTunes to the external drive and everything is fine (well, that and tell him where to find my wallpaper because it doesn't by default mountain landscape photo!).

  So I'm wondering - is there a way to delay the start of the BONE or the final control until external drives are online? Not a huge problem, but why not. I'm tired of fixing stuff when I reboot. Or else, is something to not configured right and the cause? Hmm.

  What do you say?

  Try to connect the external disk after reboot completed if he could climb.

• Can't use Firefox once after reboot my Mac, then he won't.

  After reboot or a total, followed by the setting stop running, I get use of Firefox. Once I close out of it, I can't hire back in.
  I checked and updated Firefox, no help. I am currently running Yosemite on my Mac.

  I tried a Force Quit on Firefox. Notice that the small point under the Firefox icon is missing. So, I then clicked on the Firefox icon and it has jumped up and down. Alto! I can now engage Firefox without having to restart my computer. So does that mean Firefox did not leave on its own? And why all of a sudden start. Inquiring minds. If with that I seem to be OK once more. How weird.

• RunDLL error 5510 series after uninstall

  After an unsuccessful attempt of my parents to install a photosmart printer 5510 on their acer aspire 7741-6426 laptop with Windows 7 OS. I uninstalled both the printer and the software that goes with it by using the uninstall tool, each is came up with, then used the windows installer to remove the update from hp and a help which have been posted in the window file programs and features. after reboot I was greeted with a window "RunDLL" declaring "There was a problem starting C:\Program HP Photosmart HP 5510 series\bin\HPStatusBL.dll" I ran since the removal tool for all in one printers (gr_uninst.exe) 4 times. error continues. Although I intend to reinstall this printer I would like to start with a clean slate.

  Help, please!

  Hi Heroboy2000,

  Follow the steps outlined in the document below to install the printer in Windows 7.

  Installation of the software of the printer in Windows 7 for a USB cable connection

• Computer is weird errors. Error code 0 x 80000000000000

  Original title: computer is weird errors.

  So yesterday after going back to school, I came to find my laptop does not, I always leave switch it on with the lid open, but the screen didn't light so I started down, power then started upward, after I logged in, I noticed was really slow and things were non-stop gel after 1 minute of freezing Task Manager appears finally (CTR + SHIFT + ESC) and the svchost.exe microsoft occupies 250 000 K of memory, which is not normal for my computer. I completed the process in the Task Manager and my computer stopped freezing and slow. I try to start Skype and it starts but it will not register, after clicking on the journal it just stays there with something loading wheel and nothing happens (I tried to reinstall, get the same thing). So I skip it and stay away from Skype for the day, 20 minutes later, the computer starts slow and freeze again, check the Task Manager, svchost.exe, 250, 000 K + from memory, I finished, return to normal and it just keeps repeating, and I'm sick of it. What could be wrong? To go from normal to these problems, while that the computer has not been used? I checked the event viewer windows logs and found a few errors of law when the freeze happens and I found a few errors, this could be what is mess up my computer?

  I have ESET Smart Security, would be - this firewall is blocking some of the windows .exe that makes clog? Any help much appreciated.
  Update, when I opened my computer hangs for a bit of Skype and Skype is not even trying to log in, when I check the application logs, it has errors with the SkypeUpdate.
  Here are the errors.
  (There are about 10 of them, exactly the same thing)

  Log name: System

  Source: atapi

  Date: 14/02/2012 18:58:16

  Event ID: 11

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: Echo

  Description:

  The driver has detected an error on \Device\Ide\IdePort0 controller.

  The event XML:

   

     

      11

      2

      0

      0 x 80000000000000

     

      186345

      System

      ECHO

     

   

   

      \Device\Ide\IdePort0

      0000100001000000000000000B0004C002000000850100C00000000000000000000000000000000000000000000000000000000004100000

   
  And also this error
  Log name: Application

  Source: Microsoft-Windows-WMI

  Date: 14/02/2012 18:42:25

  Event ID: 10

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: Echo

  Description:

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  The event XML:

   

     

      10

      0

      2

      0

      0

      0 x 80000000000000

     

      7790

     

     

      Application

      ECHO

     

   

   

      ./root/CIMV2

      SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99

      0 x 80041003

   

  Hello

  You did any hardware or software changes before the show?

  Method 1
  I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  SFC scanner.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3
  I also suggest you to scan virus online.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: When you run the antivirus online scan, you may lose some data which are affected by the virus. Microsoft is responsible for the loss of this data.

  Additional information:
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx

  Optimize Windows Vista for better performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• Bug in Vista without response: the icons of the Office Keep disappear after reboot - have to manually make it visible each time that

  Vista!

  Bug again issue: Vista Desktop Icons keep disappearing in the course and more !

  Out of nowhere, my desktop icons disappear after reboot. When I reboot, they appear for about a second and then they are gone .

  I have to manually select the view desktop items box every time after a reboot . I tried a clean reboot but nothing. By coincidence, the sidebar keep appearing EVERY TIME that I reboot my unchecking it displayed when it restarts.

  Y at - it a fix for this bug that continues to make my office disappear and make me manually make them visible?

  Help!

  Hi ad391970,

   

  The reason for updates make changes on the computer would be some conflicting third-party programs or there might be a corruption in the Windows Update components.

  I suggest that you try to install updates by disabling the third-party program conflict and check if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Perform the check and the clean boot if you have the problem.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  If the step above does not resolve the issue updates suggest that you try to reset the component of windows update and check if it works.

  Check out the link below to find out how to reset the windows component update

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If the step above does not resolve the question suggests that you check in a new user account if you are faced with a similar question. If a face similar to a new user account which means your other user account has been corrupted.

  See the link below for screw a corrupt user profile.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Hope this information is useful.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue screen error: 116 windows7 freeze & reboot

  original title: windows7 freezes & restarts unexpectedly

  IAM using windows7 ultimate, when iam entering or optimize windows mediacenter and games, system freezes and restarts after reboot it displays an error message such as,

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  More information about the problem:

  BCCode: 116

  BCP1: 84F69118

  BCP2: 8E0189B0

  BCP3: 00000000

  BCP4: 00000002

  OS version: 6_1_7600

  Service Pack: 0_0

  Product: 256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\052910-21075-01.dmp

  C:\Users\Rajashekar\AppData\Local\Temp\WER-42557-0.SysData.XML

  Read our privacy statement online:

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our privacy...

  Please tell me how to fix this problem...?

  Hello

  References to Vista also apply to Windows 7.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Missing/crushed configuration after reboot - Weblogic 12.1.3

  When you change the configuration of weblogic through the web console, the new configuration is lost after reboot. We detected this behavior when you change the data source options and we have even lost of deployments. It seems that weblogic isn't save the config.xml file and others where the configuration is made persistent or may be crushed?

  We use centOS with stand-alone weblogic configuration and vertical cluster vwmware and docker image machine.

  Anyone with the same problem?

  Hello

  According to Oracle Note WebLogic Server: more recent Configuration changes back rolled after a reboot of the Server Admin (Doc ID 1479592.1), you must remove the directory ' {DOMAIN_HOME} / servers/domain_bak/config_bak "then try to start the server

• Can not connect to vcenter after reboot

  Hello VMware,

  I can not connect to vcenter after reboot with the error «Failed to connect to the Vmware research service»

  

  I tried to follow below doc but no help.

  http://www.myvmwareblog.com/2012/11/28/lookupservicesdk-SSL-certificate-verification-failed/

  I tried to play with the Vcenter screen underneath, but no luck.

  
  

  To resolve this problem, replace the VCSA IP with hostname VCSA in the search service configuration file, ls_url.txt file.

  To replace the VCSA IP address with the host VCSA name in the ls_url.txt file:

  1. Connect to the VCSA via ssh under the root user
  2. Go to the directory/etc/vmware-sso using the command:

     CD/etc/vmware-sso

  3. Make a backup copy of the file ls_url.txt using the command:

     CP ls_url.txt ls_url.txt.bak

  4. Open the file ls_url.txt using a text editor
  5. Replace the VCSA IP address with the host name of the VCSA. For example:

     https:// Lookupservice/XXXXXXXXXX/sdk

     Where XXXXXX is the host name of the VCSA.

     Note: It is usually the host name of the domain the VCSA FULL name. Make sure it matches the common name (CN) in the certificate name.

  6. Restart the VCSA services by running the command:

     restart the /etc/init.d/VMware-vpxd
     restart the /etc/init.d/VMware-SSO
     restart the /etc/init.d/VMware-InventoryService

     Or

     Restart the VCSA.

  Alternatively, you can use this workaround to regenerate the certificates for the vCenter Server Appliance.To to regenerate the certificates for the vCenter Server Appliance:

  1. Temporarily change the IP address of the vCenter Server Appliance to a different IP address, not used
  2. Restart the vCenter Server Appliance
  3. Change the IP address of the vCenter Server Appliance to the originating IP address
  4. Restart the vCenter Server Appliance
  5. Connect to vCenter Server Appliance, https://vcenterserveripmanagement Web page: 5480
  6. Click the Administration tab, and then select Yes to certificate enabled regeneration
  7. Click send to save the changes
  8. Restart the vCenter Server Appliance

• Install PRE &amp; PSE V12 fails repeatedly even after reboot

  I have a working installation of

  • 5.3 Lightromm
  • Photoshop elements V11
  • First Elements V11

  on a PC running Windows 7 SP1.

  After the purchase of a new licenses of PSE & PRE V12 succesfully downloaded and unpacked all the files.

  but Setup process fails even after reboot and recovery point.

  

  Hello

  Please try to install the software with a new administrator account. A new local administrative account can exclude network strategies, corrupt profiles and configure administrative accounts: http://windows.microsoft.com/en-us/windows/create-user-account#create-user-account=windows-7

  If the error continues to appear, restart Windows in modified mode, and try again to install 12 elements: http://helpx.adobe.com/x-productkb/global/restart-windows-modified-mode-windows.html

  Concerning

  O´Neill_SG1

• El Capitan keyboard does not not after reboot

  I have a Macbook Pro 13 inch with OS X El Capitan 10.11.6

  After one of the recent improvements, I met a problem, if I take my mac, the keyboard and the trackpad to respond enough lag (if I constantly try to move the cursor, he'll have a time and then for like half an hour it will completely stop responding and after this the other repeats). It only happens after reboot and only on the login screen. So if I put my mac to sleep and then wake up, everything will work perfectly. Same thing if I managed somehow to connect, once the keyboard and trackpad respond correctly. The only button that works fine after reboot is the power button, but it doesn't help much, because it charges does not solve the problem somehow: as soon as the user selection screen, keyboard and mouse stops responding again (or should I say "start answering from time to time").

  I saw lots of questions here on the keyboard does not not after waking up, but as you can see, this isn't my situation.

  Try again in Safe Mode.

  Start up all by holding down the SHIFT key. It takes five minutes longer because it is a disk first aid on the way up, and you MUST provide your user name and password, even if you normally the automatic connection.