Weird police in CS4 with 321impact bug

Similar Questions

• How can I reinstall my police in CS4

  I had to reinstall my CS4 with the update of Yosemite.  I had a lot of problem, one being my fonts do not appear in the character/type Panel.  I got them all I have the original CD, but don't know how to import them into the program.

  pankhurm,

  I think that it can fix:

  Open system preferences and go to accessibility. Then select display in the source on the left side list, then check the box transparency reduced.

  It was introduced in this #15 post by TheUlser:

  https://forums.Adobe.com/message/6854594#6854594

  It has been described on this page from Adobe:

  http://capitalmacservice.com/font-preview-working-Illustrator-CS-5-Yosemite-fix/

  It may also depend on the monitor, as shown in the message #29 by Loncar in the same thread.

  Of course, this also affects other things so there can be a downside to it, of course, the influences of transparency reduced the appearance of other things, but so far nobody complained disadvantages.

• If a computer has been reformatted, it would be possible to reinstall cs4 with the initial registration code

  Hello

  I have a suite of master collection cs4 for 1 user install in the computer.

  But that if the fall down and reformatted computer, would it back means I'm not able to reinstall cs4?

  Or would that mean I can't reinstall cs4 with initial registry given by product initially for installation code.

  We hope to receive soon the comments and answers.

  Greatly appreciated.

  Thank you.

  Hey Yuki,

  You can download CS4 from the direct download links available at: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  But make sure you follow the steps mentioned on the page before you start the download.

  You can then use the serial number purchased, you need to activate the software.

• How blackBerry Smartphones are registered with RIM bugs?

  I've seen several messages reminding people that it is a place of community support.

  Fine - then, how a long time BlackBerry user in fact save bug with RIM?

  If this forum is monitored and RIM take notes comments here?

  My main bug is - as I already posted NO supported applications.

  Said is unable to contact the update server... Sorry - but the turf - I want to manage my local applications - you assume I want to upgrade the operating system.

  Then...

  How to raise a bug and ask questions

  (1) is it because I'm in the United Kingdom?

  (2) is it because my BB is on O2 to the United Kingdom

  (3) is it because I use a 8900?

  (4) is it because I'm connected wireless to the Internet?

  It's the standard validation issues that I would task any Quality Assurance team with answering and use in investigating the issue.

  How can so - someone - I raise a bug with RIM?

  Because - to be honest - BusySync gave the facilities that I currently have with the DTM for Mac - sync contacts, better synchronization of calendar that I have seen with this DTM (why don't I still choose the mail on the BB calendar - I can choose that on the Mac!)

  I will try to update my OS - O2 do not seem to make the updates their forwarding sites for RIM and air...

  So - unless I'm using Windows (no thanks!) - I'm totally scuppered re: update of the OS...

  It's hard to be a citizen of class 3rd in this world of the 21st century!

  Thank you very much. I'll see if I can find more information on this... You have my email, so feel free to bug me anytime if you have any other problems.

  But for now, a weird to manage your applications is to disconnect from the Internet, so that BlackBerry Desktop Manager cannot detect the update for your 8900.

• Weird problem dual monitor with change of colors in the image

  I have two monitors, the same brand and type, even the parameters of color and adjustments, and until this image was the same on both of them. Nothing about the monitors or color preferences, I changed, but all of a sudden I started having this weird problem. Example:

  1 here is the screenshot. I have a pure red picture, palettes and layers panel are on the second monitor.

  

  2. I'm starting to drag the window to the other monitor and ALL HOLDING the mouse button (as I said, dragging)

  

  3 and when I release the color mouse suddenly changes.

  

  If I choose window and then drag again color returns to normal. As soon as I release the mouse changes color.

  This only happens on the second monitor.

  I reinstalled the drivers graphics and also re-installed Photoshop CC 2014.

  I also changed the settings so that the picture both monitors say is the same (in double screen under windows) and there is no problem then. If I return to the extended display problems with BUGS. But as soon as I lock the computer, then connect again the problem arises again.

  Any ideas that I have to do or how to fix it?

  Hey there '60 seconds '.

  Are the two video outputs of your the same fate from the back of the monitors themselves? I had this problem some time while creating my quad-monitor put in place with several types of outputs and how it can be frustrating!

  If they are the same outputs, I think you might want to try a lead to ensure that only one you currently use that creates color strange question is not defective.

  I hope this helps!

  Daniel

• Reading/export framework weird jump/stuttering (CS4)

  Hello. I'm really at a loss here. After more research, I came across messages of other people with the same problem on various sites, but no answers or with solutions that did not remedy my situation. But now I have a full video itching to finish and I can't do squat with her.

  My specs:
  Windows XP SP3, Intel Core 2 Quad 3 GHz, 4 GB Ram, nVidia GeForce 9600 GSO; Premiere Pro CS4. Not the most rig for video by far, I know, but I did have problems real editing/export so far.

  The problem:

  I blow me intermittent frame / stuttering on playback and export. In other words, it plays back jumping back between past and future executives.

  I read that it is often due to an incompatibility between the format of the images and the settings of the sequence, and indeed I red especially bar my clips. But I can't imagine what that "inadequacy" he is. My camcorder records 1080 p in AVCHD format at 29.97 FPS, 48 kHz audio. So, when you create the project, I chose preset AVCHD with all these settings, with the exception that I changed audio at 44.1 KHz as the audio is just an overdub of a recording of music, which is at this sampling frequency. However, creating a sequence of test with the EXACT settings still gives a red bar.

  I also read that it may be caused by the lack of processing power or too many effects; but these stutters read and return it in the raw images, even a single clip without effects. I did have this problem with previous projects, more complicated with many effects, which has played and made very well. Only this one has serious problems.

  The weird part is that he doesn't seem to be just a problem with the playback/rendering; If I walk through the items which are stuttering frame-by-frame, or topping one of the clips of problem, these jumps seem to be among the items themselves. Stuttering is relatively uniform; Always happens in the same places, but if I rearrange some things, some of these stutters will disappear or others will emerge elsewhere. Certainly does not seem like a problem related to performance, not to mention a problem that makes no sense.

  Stuttering is so common in export, it ruins the video entirely. Does anyone have an idea what's not here?

  http://blogs.Adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html

  For editing AVCHD material EFFECTIVE you need a quad-core processor (i7 - 2600 k is better) and a MINIMUM of 2 hard drives

  My 3 hard disks are configured as...

  1 - 320Gig Boot Win7 Pro 64 bit and all the program installs

  2 - 320Gig given for Win7 Exchange files and video project files

  When I create a project on the #2 drive, the various work followed by files,.

  so my boot drive is not used for files and media cache folder

  3 - 1Terabyte data for all video files... entry & files (*) of output

  (*) for 4 hard drives, 3 source of all files drive & ride 4 all output files

  .

  Microsoft Search to find out how to redirect your Windows swap file

  http://search.Microsoft.com/search.aspx?mkt=en-us&setlang=en-us

  .

  Try to use only a hard for video editing

  .

  You are a conductor with a stick that you use to point to different parts of the Orchestra... it is like Windows pointing to different parts of the hard disk to clean Windows or load segments of emissions for various functions

  .

  Now, at the same time and with the same hand... while using the wand to direct the Orchestra... to take a bow and play a violin... it would do something with your video file at the same time as all other work

  .

  You as a person cannot do both at the same time with the same hand

  .

  A computer is a LITTLE better, because it allows to switch from one type of task to another very quickly, but not quickly enough for EASY video editing

  .

  You need at LEAST two hard disks (separate readers, never a partition http://forums.adobe.com/thread/650708 for more) Windows (or Mac OS) and software on your drive start-up and video files on a 2nd drive so the boot drive is not slowed down trying to do everything

  .

  I find that the three discs that I use work very well for me, for AVCHD video editing... some people use a 4th disk, so video INPUT files are on disc three and all OUTPUT files are in four in car... I bought only one case of mid-tour instead of a full tower case (my bad... but has had to adapt to the available space on my desk!) so I use three readers who will be adapted

  .

  Depending on your exact hardware (brand motherboard & pregnant make model AND USB2 & brand model AND external disk hard & model) AND the type of video file, you can... or maybe NOT... to be able to use an external USB2 drive for video editing SD (Standard definition)

  .

  Steve Grisetti in Premiere Elements forum http://forums.adobe.com/thread/856208 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433 use USB external references for editing

  .

  A USB3 HDD connected to a motherboard with USB3 is supposed to be fast enough for video editing (I do not have such, so do not know) but eSata there pretty fast data transfer for video editing... I did not use eSata Dock below for reference only, YMMV and all the usual disclaimers...

  .

  http://www.Amazon.com/Thermaltake-BlacX-eSATA-docking-station/DP/B001A4HAFS/ref=cm_cmu_pg _ t

• PS CS4 with CR 5.7, Lightroom 2.7, DNG 5.6 converter all do not recognize 1000 d .cr2

  Like others I have experienced http://forums.Adobe.com/message/3706070#3706070 also cannot open raw files from Canon 1000 d .cr2 even if it is listed as supported in the file Readme of Camera Raw 5.7 http://www.Adobe.com/special/Photoshop/camera_raw/Camera_Raw_5.7_ReadMe.PDF

  I use PS CS 4 with Camera Raw 5.7 on a PowerPC G5 and I have no problem opening of Nikon raw files, say,.

  It seems to be no official response from Adobe how to solve this problem, even if it is not new. What knowledge went out previous decisions? Camera Raw 5.7 supports CS4 on PowerPC or isn't? If not, why this exception is not listed in the documentation?

  In the interest other 1000 d owners who encounter the same problem that I have, seems, who provided one were shooting Raw + jpg there is a possible bug that will corrupt RAW files if you transfer using the 1000 d camera. The symptoms are that the RAW files are about the same size as jpg files when you imported the. This was the case with my files. RAW files should be larger than the jpg's counterpart.

  The solution is to use a RAW compatible card reader to transfer with. or for the future, to shoot only in RAW.

  As RAW import is something control to Adobe via Camera Raw, I can't help to feel their communication with Canon and here in this discussion very like any other concerning also the same problem, as someone who works for Adobe, that is posted here in the forums about this, might have mentioned this bug years ago. No mention outside worked with Canon, so that products Adobe would fully cooperate with the 1000 d camera that Camera Raw supports officially.

• CS4 reveal 3d bug and searching the forum do not work

  I see my results of research (see below), there are 4 hits on "Reveal 3D" but HOW AM I SUPPOSED to NAVIGATE FOR THEM!

  

  The only clickable things are the forum name (take to the top of the main forum NOT the research topic) and the name of the poster (for access to their profile page) um, huh? What I'm missing here? It's a browser thing? (IE 8) I don't understand...

  Anyway, the problem I have is I use my ability to paint CS4 Extended 3D for the first time and am using the surfaces reveal feature to hide the sections of the model so I can paint over some areas. The hide feature works very well. I finished that part of paint and am trying to unmask... or reveal, all. It does not work. I have to lower the advancement of 3D movie and select reveal all, or I use the hotkey combo and nothing works. Here's the weird part: if I select 'Reverse Visible' indeed and turns off what WAS hidden with what is shown (so I don't know the rest of the model is actually still there), but even if I try to reveal all when THIS HALF of the model is displayed, it reverts to the original part unhid I was working on initially (and the hidden originally part rehides). How can I correctly display all at once?

  Thank you.

  Here is a THREAD in the forum comments on research.

  Hunt

• Problem with TOC (Bug?) levels

  Hello!

  IM using layout-> Table of contents to generate the table of contents for my magazine. My pages have essentially two paragraph styles that will be used in the table of contents window. They are Section and Tittle and are defined as style paragraph and well synchronized with the other articles of the journal, im using a book to organize files.

  In the table of contents window a pick for the first style paragraph of article style and add the paragraph include style, he then added section title style to the include paragraph style.

  Im getting

  Tittle1... 3

  Section1

  Tittle2... 4

  Section 2

  Instead of

  Section1

  Tittle1... 3

  Section 2

  Tittle2... 4

  Style of cutting area is at level 1 and box style Tittle is at level 2 in the table of contents window. It make sense to me, when I'm defining paragraph styles for OCD, but is different from what I expected.

  This is a Bug on the CS4 for Windows? Someone at - it a similar problem?

  Thank you

  What is the purpose of positioning of the text and the images taking paragraphs?

  This kind of problem is usually the result of the positioning of the frame. ID looks at the top left of the page and working down before moving to the right. TOC levels are used to define dashes, not the order in which appear the inscriptions.

• IKEv2 with certificates: bug or not?

  Hello

  I am tryting to test the IKEv2 VPN connection, which is the use of certificates for authentication. Customer must be on MAC or iPhone/iPad. Because I have encountered some problems, I looked more community and found a few messages that describe the problem just the same thing I've come across.

  So, before making any programming, I wanted to make sure that IKEv2 VPN can be established, using "clean" OS (without anything other than the new facility). Also, I tried to configure VPN connection through boxes of integrated dialogue OS and/or via Apple-Configurator created VPN profiles. Unfortunately, none of these methods was successful.

  On MAC, trying to establish a VPN connection, I get errors like:

  ...

  The 5 February 10:26:59 132 nesessionmanager [9447]: could not find the VPN enforcement for plugin type com.apple.neplugin.IKEv2\

  The 5 February 10:26:59 132 neagent [9824]: IKEv2 Plugin: ikev2_dns_callback: error-65554\

  ...

  On iOS, a bit different:

  ...

  6 Feb 10:48:49 Gorans-iPhone nesessionmanager [3427] : NESMIKEv2VPNSession [srxapple:B853702D - A36D - 4 D 70-A780-5A28FDE4C449]: received an order of preferences Startup [3681]

  6 Feb 10:48:49 Gorans-iPhone nesessionmanager [3427] : NESMIKEv2VPNSession [srxapple:B853702D - A36D - 4 D 70-A780-5A28FDE4C449]: changed to connecting status

  6 Feb 10:48:49 Gorans-iPhone nesessionmanager [3427] : Plugin com.apple.neplugin.IKEv2 is not a bundle URL

  6 Feb 10:48:49 Gorans-iPhone neagent [4003] : IKEv2 Plugin: ikev2_dns_callback: error-65554

  ...

  Within the community, the same errors are already reported, but it seems that nobody has found a solution for it. If I understand correctly, is not programming question, but OS bug or bug installation, no matter what.

  The question is: why the system cannot find VPN enforcement for the plugint, which seems to be within the OS. Looking through the MAC file system, I am able to find some inIKEv2.vpnplugin/Contents/Info.plist /System/Library/Frameworks/NetworkExtension.framework/Versions/A/Resources/Plug and files, so it seems that the plugin is there, but the question is: is it in the right place, or something is missing?

  On iOS, error is a bit different and points out that the plugin didn't bundle URL. I don't understand the meaning of this error.

  Can anyone help with this? No work around which may help? Is there anyone who could open the support request (feature request, whatever it is called), I'm not able to do? I would appreciate any help with this issue?

  BTW, I reported this problem on El Capitano (latest version), as well as on iOS 9.2.1

  You seem to be triggering a bug:

  https://github.com/Lionheart/openradar-mirror/issues/6082

• My computer is infected with virus/bug I have checkd with Anti virus few records showed infected but could not remove.

  My computer is infected with a virus/bug I have checkd with Anti virus few records showed infected but could not withdraw, step by step programs stoped working, I tried all the things microsoft Web and other webs to run antispy etc, but nothing works programs start, but halfway to display error and stop now even explore stop working, now I had a white windoa screen opens more but I have a lot of data that is important, how to fix it? can anyone help please thanks

  Raz2009,
  If you have a known problem with the virus then I suggest to get an antivirus program that you can boot from and run it without starting Windows.

  Another option would be to format your drive and do a clean install of Windows (this would remove all the data of your drive).  If you have a backup of your data, this is the best course of action.  If you do not have a backup, you can then do a parallel install (This installs XP in a different folder if you don't lose any data). Here is an article on installation options: http://support.microsoft.com/kb/316941
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Beta 4 Toast with button bug

  So I added a button to the message of toast.  Normally without the button, it disappears automatically after 10 seconds, but with a button to 01:30 min before he goes.

  the doc below.

  «The bread will be dismissed after one is invalid preset time-out period.» If the toast includes a button, then the time-out is enabled with the first user intervention, for example, user touching the screen. Meanwhile, if a button is displayed, the user can select it. »

  Anyone have this problem?

  Update: after the msg of toast is showing and if I touch the screen then it will activate the timeout, then he disappears, but if I leave it sit there it won't go away until the very very very long time.

  The behavior you describe seems to be exactly what they were. It's for cases as in the example of "Undo" (see the screenshot) where the user cannot get ready to react instantly.

  Is not what you are watching exactly what describes the text you quoted? If so, this is not a bug as stated in the title of the thread, even if it does not fit what you want it to do.

• How to complete the police (not shadow) with color?

  I've been struggling with this for too long. I can't get the main font color space - it will only fill in the grey area. How isolate and fill the white space of main policies? (Please explain in detail, sorry, I'm new to Illustrator):

  

  I tried a clipping mask (is a little lost there) and filling / race in appearance. If anyone can provide very detailed directions, I would be extremely grateful.

  I did w Hat you explained-, but for some reason any does not apply the color (yellow) - what Miss me?

  

• HTML Editor: are there known with field bugs merges into hyperlinks?

  " I try inserting a merge into a hyperlink field (our contacts have custom subdomains I want to make a link to), which is the syntax: < a href =" http:// < span class = eloquaemail > field_merge1 </span >. website "> "

  However when I test the connection need me a URL that looks like: ' < span class = "eloquaemail" > field_merge1 </span >.» website' in the browser.

  The strange thing is I managed to get this merger of field working in other emails, but when you use exactly the same syntax for email newly uploaded - it breaks.

  Anyone have any idea why this is happening? There are the known bugs with the HTML editor or any workaround that exist?

  Have you added this link? Whenever we send a link with a fusion of field, you must disable the monitoring, otherwise the link appears just as it did in your example, with code fusion instead of the merged data.

  If this isn't the problem, have you checked the obvious candidates first: that the merger of field is correctly implemented, as recipients have contained in the appropriate field in the database, etc.. ? If you want just send test emails to yourself, it is possible that you have not contained in your file? If you have it right in your example, make sure that it is without the quotes in the span for the URL tag.

• Editing in Adobe Reader on IPad Pro, economy to Dropbox, do lines of police no match with signature only lines when send the PDF by email.

  

  Hi claytonw71269328 and Rosinn.

  I want to give you an update on the problem you reported in this forum thread.

  Some iOS with capabilities overview PDF applications have problems displaying text annotations correctly.

  

  The following applications can display text annotations in the original and correct positions.

  • Acrobat Reader for iPhone and iPad
  • Dropbox (for iPhone and iPad)
  • Acrobat Reader DC (for Windows or Mac)
  • Overview of Apple (for Mac)

  However, Apple Mail, iBooks and other iOS applications of third parties who use iOS Apple SDK show text annotations in deformities due to a bug in Apple .

  • Mail (for iPhone and iPad)
  • iBooks (for iPhone and iPad)
  • Google Reader (for iPhone and iPad)
  • Gmail (for iPhone and iPad)
  • Microsoft OneDrive (for iPhone and iPad)

  Here are the screenshots of a PDF document (not an interactive PDF form) with text annotations in various iOS apps on an iPad iOS 9.3.1 running.

  Acrobat Reader for iPhone, iPad

  

  Dropbox

  

  Mail

  

  iBooks

  

  One solution is to open a PDF document with text annotations in Acrobat Reader (desktop and mobile applications).

  • For iPad, see How to open PDF documents in Adobe Acrobat Reader for iOS (iPad version)
  • For iPhone, see How to open PDF documents in Adobe Acrobat Reader for iOS (iPhone version)

  I hope this helps.