WEP or WPA encryption

Similar Questions

• Tecra 8200: How to get the WPA encryption?

  How can I get wpa running on my tecra 8200. I installed Windows XP SP2, but it still doesn't work.

  Where can I download an update of the firmware of WLAN card because it's my last hope...

  Hello

  It depends on the properties of material WLan if you use WPA encryption option.
  You cannot enable this feature by updating the BIOS or the installation of SP2.
  As far as I know, this wireless network card supports only WEP, but not a WPA encryption.

• Atheors 5005 Wlan card cannot connect to WPA encrypted AP

  I'm posting this new thread too thought...

  I'm unable to connect to a wpa encrypted using my satellite pro L20 girlfriends access point / Winxp
  Windows XP will allow me only to choose either 'disabled' or 'WEP' in the tab 'association' of the section advanced properties of wireless connection.
  I downloaded drivers atheros 5005 g (v 4.0.0.14001) and while I can find the access point and the value upward WPA encryption and enter the correct password.
  the device connects to my access point.
  I managed to stay connected with my macbook pro and my toshiba tecra m9 14 c in a few seconds...
  Anyone has any idea what I can do to get this working?

  Hello

  AFAIK the Atheros chip also supports the latest WLAN security standards, including the Wi - Fi Protected Access WPA and WPA2.

  In your case I would update the Wlan driver from this page of Toshiba:
  http://APS.toshiba-tro.de/WLAN/?page=downloads

  This time it s a version 7.6.0

• Changed a WPA encryption. Office connect not wireless, ethernet cable.

  Recently changed encryption wi - fi WEP to WPA, existing home wireless network. Change of wireless connectivity for laptop computer and printer is fine, but the Office will not connect wireless, ethernet cable.

  To your XP computer's wireless adapter supports WPA?  Many as these old maps that were made before that WPA has fully adopted as a protocol.  There are also various types of WPA, not all compatible with each other.

• How can you find your wep or wpa key to go on the internet I have a linksky route

  on the internet, computer wife XP runng had no problem, then when it turned on today that it asks for the wep or wpa key and I don't know what it is.

  Hi WILLIAMBERGEN,

  In a wireless network, the WPA key is a password that protects the network against outside intrusion. If a wireless router is configured with WPA encryption, you need the WPA key for access to the network and to make changes to your network settings

  We will check if the following is useful.

  a. open your web browser. In the address bar, type http://192.168.1.1 and press to enter. It is the default IP of many wireless routers. If this does not load a web page, see the manual of your router to the IP address of the configuration.

  b. on the screen that appears, you will be asked to enter your username and password. If you do not know your user name and password, try the default name of the user and the password of your router.

  c. If you are unable to log in or search for the user name and password of your router, reset the router.

  d. in your router settings, look for a "safety" or "wireless security" tab open this tab and the WPA key should be displayed.

  You can contact the support of router for more information.

• Wireless print server has no WPA encryption

  I have a WPS54GU2 print server which works well on my network wireless for a couple of years.  However, I now have a new wireless router and was advised to use WPA instead of WEP encryption.  OK, so I'll change the encryption on the print server and all will be well... isn't it?  Evil.  The print server has no choice of WPA encryption.  All I get are WEP choices.  Site Web of Linksys shows I should be able to select WPA Personal in the wireless security menu, but he's not here.  Any suggestions?  I guess I can put the entire network to WEP, but I'd rather have the extra if possible security.  Thanks for any help!

  WPS54GU2 print server only support Wep. If you want to use this device set the WEP security on the router.

• WUSB600N & WPA2/WPA encryption?

  HI -.

  I'm setting up a configuration wireless at a friend's House. She bought a Linksys WRT320N Wireless Router & use the WUSB600N USB adapter on old Dell Inspiron 5000, that is running Windows XP.

  For some reason that we could only connect the adapter using WEP encryption - it wouldn't connect to the router using WPA2 or WPA encryption. Can anyone think of a reason why this would be? The WUSB600N adapter is supposed to be capable of WPA2/WPA protocols.

  Regarding the laptop - I think that she is under XP SP2. The operating system would be the issue?

  Although WEP works (its better than nothing)-j' wish to enable WPA or WPA2 encryption.

  Thanks in advance for the help.

  Rob

  What version of Windows XP is installed on your computer? Is it Sp1 or SP2 or Sp3... Most of the version of Windows XP SP2 and SP1 does not support WPA or WPA2 Encryption. So in these you need to update your operating system.

  Wired computer to the router and open IE and then click on "Tools" and click on "Windows Update" and it will download all the latest security patches on your computer from the Microsoft Web site.

• Access wifi with WPA encryption Vista giving "access: Local only.

  I've read many threads on a similar situation. I am convinced that the symptom has many different causes. Nothing I've read solves the problem for me.

  I have toshiba vista laptop and struggled until I've decided to return to the original recovery disk from the manufacturer, reloading everything from scratch. still did not help. The use of WEP encryption works, so I don't know the interface wireless on the laptop works. but it is not acceptable that WEP is such a weak encryption - basically no security. try to use the encryption WPA or WPA2, which does not work for vista. laptop is a few feet from the router, so a lot of signal strength. one other non-Vista computer laptop works well. uninstalled the trial version of mcAfee. updated the drivers and software vista for later. assign an ip address to the laptop, and when it starts up, I see that this address is assigned. Disable all the ipv6. disabled the DHCP broadcast stuff. off the vista firewall.  ipconfig/all is shown below, which seems ok to me. never had Norton or symantic is installed. tried to reset the ip stack. Wired ethernet to the router works. just to get the local access only on the wireless with WPA encryption. The router is quite new netgear WNR2000 and also tried a brand new netgear router multiband with identical results.

  Sure could use some help here.

  Windows IP configuration

  Name of the host...: FamilyComputer
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR5005G Wireless Network adapt
  Physical address.... : 00-16-E3-F2-DE-BB
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv4 address: 192.168.1.99 (Preferred)
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DNS servers...: 192.168.1.1.
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek RTL8139/810 x Family Fast Ethernet NIC
  Physical address.... : 00-1B-24-20-AB-E7
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Hello

  You said that he can connect with WEP but not WPA.

  There is therefore no connection with the router under WPA.

  For as far as the OS is concern that WPA doesn't have a general problem in Win XP SP3, Vista or Win 7.

  Encryption in many cases problems stem from the problem of drivers.

  Quote: "I'm still stuck with a non-working wireless network on my Vista laptop and the place where it is normally used. This means in technical terms.

  For example, there's something special about this wireless source?

  You can try to check the integrity of Vista using the SFC - http://support.microsoft.com/kb/929833

  If I were in that situation, I'll borrow a wireless USB network who knows work and try to make sure that it is not wireless card related problem.

  BTW, have you checked the process that there is no residual "junk" left by the safety test.

  Download it, run it and take a look at changing it running.

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• WiFi M70 satellite connection with WEP or WPA

  Hello
  I have the Satellite M70-164 with an Intel PRO 2200BG wifi adapter with the latest driver for the value.

  My problem is that I can connect only to networks with security (with WEP or WPA), when I try to connect to "open" wifi computer networks never establishes the conection, he said "waits for the network.

  Any help will be appreciated.
  Pedro

  Hello

  Have you checked if this problem occurs with the 2200 BG WLan driver on the site of Intel?
  Please check for this possibility.
  Please follow this link:
  http://downloadfinder.Intel.com/scripts-DF-external/Product_Filter.aspx?ProductID=1637&lang=eng

  Good bye

• Where and how to find the wep or wpa security key?

  I am trying to go to Xbox 360 live. I bought a direct card and it worked fine after that I entered the subscription on the map code. The next day, I was unable to sign. I have tried everything I know, but now he wants my wep or wpa security key. I didn't when I first adding them. I am usuing a wi - fi connection and cannot locate a wep or wpa security key. Can you possibly tell me where to find it?

  Hello

  The WEP or WPA security key is stored on the page of the router. I suggest you to connect on the router's Web page and retrieve the key that could help connect the Xbox.

  If the above mentioned steps article does not help, then it would be better to post the same question in the Xbox forum to get help. We have a dedicated team to help you with such questions.

  Forum Xbox: http://forums.Xbox.com/?XR=shellnav

  Hope the information is useful.

• Change from WEP to WPA

  I would like to know the steps to change the setting from WEP to WPA security, including steps to change the name of the wireless network or SSID if necessary.

  Here's the situation: our home wireless network use WEP as the security or setting Mode. Daughter just bought an Apple Mac, which she is told requires the creation of WPA. I made the change to WPA-Personal as your link educated, but only this change has turned off our ability to operate wireless in our home and internet network. An online chat agent failed to provide aid because of the question of the guarantee, but he suggested that the solution would be satisfied if he could guide me through to change the name of the wireless network or SSID. He didn't explain. What I need are not all and all to managed to get the WEP key WPA change. Thank you for your consideration.

• Photosmart B 209 sees more WIFI network since I moved from WEP to WPA

  My HP Photosmart worked fine until my ISP asked me to change the name of my WIRELESS network (which now includes the symbols underscore) and the type of protection increased from WEP to WPA... Paswword has not changed, it's just the type of protection

  Since then, the printer can't see the WIFI network. I printed a network report and it says that I need to check that the network SSID & printers are the same...

  My former network SSID is: Freebox and it has moved to: FREEBOX_BRUNO_DH.

  Where is - this can be changed on the printer?

  Thanks for your help

  Concerning

  Why your ISP dictates what will be the name of your SSID?   This is not good.   You can make your SSID name all you want, but I wouldn't use your ISP said.   This is YOUR network, do what you want.   Do the SSID and password for you.

• WEP to wpa

  Difficult to change from wep to wpa.
  Can change my wpa wireless router but the laptop comes in place with the computer is not configured to recognize this network.
  Tried to change network to wpa in manage wireless networks, but it does not work either.
  Have a network set to the public.
  Notebook is only 2 years.
  Any ideas.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------

  OK do this without disconnecting the network 1.

  1 Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - you may not be able to remove the current a then not the next.

  2 Control Panel - Network & Sharing Center - left side, click on manage wireless - right click
  your network - network to remove.

  If necessary unplug the network and repeat step 2.

  RESET

  Start - Connect To log on to the network.

  ================================

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  Some of those that cause this problem.

  ------------------------------------

  Are you running Vista SP1 or SP2?

  Start - type in the search box-> WinVer find upstairs and double-click it.

  Rob - bicycle - Mark Twain said it is good.

• WEP to WPA migration / easy deployment to wireless clients tools

  Hello

  I would like to learn all the tools that I could use for the deployment of wireless to wireless clients settings in our local network. I came across some links in Microsoft using Group by AD (GPO) policy, but GPO seems more than one deployment of operating system or applications, have not seen anything that the wireless.

  You know all the tools, Cisco wireless, or even MS GPO management clients if this can be done with easy deployment of WEP to WPA change.

  The tool should deployment SSID, WPA pre-shared key.

  Concerning

  Hello

  MS group policy will do, no problem.

  If you create a new policy for your ad group (or use your default GP) and go to properties-> the Computer Configuration-> Windows settings-> security settings-> wireless-> Create New strategies-> follow all the next, next, next steps and then add the details of your WLAN.

  If you use a separate policy to the default policy, make sure that the policy options you check otherwise default group policy will stop the new parameters being the subject of a push to your ORGANIZATIONAL unit. The next time that the machine joins the domain, the settings will be drawn down and can connect to the WLAN.

  If you use a MS domain is the best way to do it (both with the help of your customer WZC) and no third party tools i.e. Intel etc.

  I hope this helps.

  See you soon

  Carpet

• Satellite C660 freezes when WLan connection to WPA encrypted networks

  Hello everyone

  I have a toshiba satellite C660-A259 (Middle East version).
  The laptop is great, but it has a major problem.
  Whenever I try to connect to WPA / WPA2 networks, laptop computer freezes completely during the connection, dragging me to hard it boot.

  Sometimes it connects to wpa networks then hangs after some time, or with success connects but freezes on stop. However, the laptop connects without problems to networks with WEP encryption, without any security or via ethernet networks.

  The wireless network adapter is Atheros AR9002WB-1NG.
  I tried to update the software for the adapter on your support site, but it did not work, he did the wireless not working not at all, so I used sytem restore to return to normal.

  Please help and thanks :)

  > I tried to update the software for the adapter on your support site, but it did not work, he did the wireless not working not at all, so I used sytem restore to return to normal.
  Can you please tell us what is normal? Is the State of natural plant or perhaps you use your own installation of the OS?