WEP to WPA migration / easy deployment to wireless clients tools

Similar Questions

• WPA-wireless - laptop upgrade from WEP to WPA

  I have an old laptop Toshiba Tecra9000 XP and want to use it on my home wireless network.  Monitoring uses WPA security and the tecra has only WEP.   How and what I update. I was going to start with service pack 3, since mine has service pack 2.  But if SP2 can use WPA, I would prefer that.

  Although SP2 does support WPA, you sure you're not referring to WPA2?  SP3 supports WPA2 or you can get an update for XP SP2 here WPA2:

  "Description of the update of the Wireless Client for Windows XP with Service Pack 2"
    <>http://support.Microsoft.com/kb/917021/ >

  HTH,
  JW

• WPA Migration mode

  We have Cisco Aironet 1130AGs. We'll get our network to WPA, but now it's all WEP. I would like to implement WPA Migration mode on all of our access points so accessible to WEP and WPA, clients but I have problems of implementation. Someone at - it a step by step guide for this?

  Thank you

  Scott

  Hi Scott,.

  track orders for this configuration:

  ap1200# configure terminal 

  ap1200(config)# configure interface dot11radio 0 

  ap1200(config-if)# ssid migrate 

  ap1200(config-ssid)# authentication open 

  ap1200(config-ssid)# authentication network-eap adam 

  ap1200(config-ssid)# authentication key-management wpa optional 

  ap1200(config-ssid)# wpa-psk ascii batmobile65 

  ap1200(config-ssid)# end 

  ap1200(config-if)# encryption mode cipher tkip wep128 

  ap1200(config-if)# encryption key 3 size 128 12345678901234567890123456 transmit-key 

  ap1200(config-if)# end More in this link: http://www.cisco.com/en/US/docs/wireless/access_point/12.2_11_JA/configuration/guide/s11auth_ps430_TSD_Products_Configuration_Guide_Chapter.html#wp1040844 

  Regards.

• How can you find your wep or wpa key to go on the internet I have a linksky route

  on the internet, computer wife XP runng had no problem, then when it turned on today that it asks for the wep or wpa key and I don't know what it is.

  Hi WILLIAMBERGEN,

  In a wireless network, the WPA key is a password that protects the network against outside intrusion. If a wireless router is configured with WPA encryption, you need the WPA key for access to the network and to make changes to your network settings

  We will check if the following is useful.

  a. open your web browser. In the address bar, type http://192.168.1.1 and press to enter. It is the default IP of many wireless routers. If this does not load a web page, see the manual of your router to the IP address of the configuration.

  b. on the screen that appears, you will be asked to enter your username and password. If you do not know your user name and password, try the default name of the user and the password of your router.

  c. If you are unable to log in or search for the user name and password of your router, reset the router.

  d. in your router settings, look for a "safety" or "wireless security" tab open this tab and the WPA key should be displayed.

  You can contact the support of router for more information.

• Change from WEP to WPA

  I would like to know the steps to change the setting from WEP to WPA security, including steps to change the name of the wireless network or SSID if necessary.

  Here's the situation: our home wireless network use WEP as the security or setting Mode. Daughter just bought an Apple Mac, which she is told requires the creation of WPA. I made the change to WPA-Personal as your link educated, but only this change has turned off our ability to operate wireless in our home and internet network. An online chat agent failed to provide aid because of the question of the guarantee, but he suggested that the solution would be satisfied if he could guide me through to change the name of the wireless network or SSID. He didn't explain. What I need are not all and all to managed to get the WEP key WPA change. Thank you for your consideration.

• Photosmart B 209 sees more WIFI network since I moved from WEP to WPA

  My HP Photosmart worked fine until my ISP asked me to change the name of my WIRELESS network (which now includes the symbols underscore) and the type of protection increased from WEP to WPA... Paswword has not changed, it's just the type of protection

  Since then, the printer can't see the WIFI network. I printed a network report and it says that I need to check that the network SSID & printers are the same...

  My former network SSID is: Freebox and it has moved to: FREEBOX_BRUNO_DH.

  Where is - this can be changed on the printer?

  Thanks for your help

  Concerning

  Why your ISP dictates what will be the name of your SSID?   This is not good.   You can make your SSID name all you want, but I wouldn't use your ISP said.   This is YOUR network, do what you want.   Do the SSID and password for you.

• WEP to wpa

  Difficult to change from wep to wpa.
  Can change my wpa wireless router but the laptop comes in place with the computer is not configured to recognize this network.
  Tried to change network to wpa in manage wireless networks, but it does not work either.
  Have a network set to the public.
  Notebook is only 2 years.
  Any ideas.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------

  OK do this without disconnecting the network 1.

  1 Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - you may not be able to remove the current a then not the next.

  2 Control Panel - Network & Sharing Center - left side, click on manage wireless - right click
  your network - network to remove.

  If necessary unplug the network and repeat step 2.

  RESET

  Start - Connect To log on to the network.

  ================================

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  Some of those that cause this problem.

  ------------------------------------

  Are you running Vista SP1 or SP2?

  Start - type in the search box-> WinVer find upstairs and double-click it.

  Rob - bicycle - Mark Twain said it is good.

• WiFi M70 satellite connection with WEP or WPA

  Hello
  I have the Satellite M70-164 with an Intel PRO 2200BG wifi adapter with the latest driver for the value.

  My problem is that I can connect only to networks with security (with WEP or WPA), when I try to connect to "open" wifi computer networks never establishes the conection, he said "waits for the network.

  Any help will be appreciated.
  Pedro

  Hello

  Have you checked if this problem occurs with the 2200 BG WLan driver on the site of Intel?
  Please check for this possibility.
  Please follow this link:
  http://downloadfinder.Intel.com/scripts-DF-external/Product_Filter.aspx?ProductID=1637&lang=eng

  Good bye

• Where and how to find the wep or wpa security key?

  I am trying to go to Xbox 360 live. I bought a direct card and it worked fine after that I entered the subscription on the map code. The next day, I was unable to sign. I have tried everything I know, but now he wants my wep or wpa security key. I didn't when I first adding them. I am usuing a wi - fi connection and cannot locate a wep or wpa security key. Can you possibly tell me where to find it?

  Hello

  The WEP or WPA security key is stored on the page of the router. I suggest you to connect on the router's Web page and retrieve the key that could help connect the Xbox.

  If the above mentioned steps article does not help, then it would be better to post the same question in the Xbox forum to get help. We have a dedicated team to help you with such questions.

  Forum Xbox: http://forums.Xbox.com/?XR=shellnav

  Hope the information is useful.

• Wireless clients cannot 'see' the P1102w printer

  I have a printer HP LaserJet P1102w of professional set up and connected to the router wireless BT Voyager 2500V. If other computers are connected by a wire to the router, they can print and they can reach the printer over the network (tested using the ping command).

  However, if they are connected to the router as a wireless clients, they cannot find the printer in the network. If I use the ping command to test the connection, then the command indicates that the destination is unreachable. They can 'see' and connect to each other, but the printer seems inaccessible.

  Any suggestions? Thank you.

  Wireless clients have network cads Intel (R) Wireless WiFi Link 4965AGN (802.11n), the computer operating system is Windows Vista (32-bit and 64-bit). Firewall is turned off. Encryption WPA - PSK with TKIP data encriptación is used. MAC filtering is disabled.

  You have access to the configuration of the router?  Check if "AP Isolation" is enabled.   It is a feature of the router that isolates wired to the wireless clients.

  Of course, there is no point because your problem is the reverse, however, it may be interesting to play with.  Let's start there.

• Location of the Wireless Client

  Someobody told me that the Cisco wireless control system has a way of determining the physical location of wireless clients. Is it true for this and if so where can I find more information? I have big plans for this kind of instalation.

  It's true, but only if they are taller than 4'11 "...

  just a joke!

  Start your search here:

  http://www.Cisco.com/en/us/products/HW/wireless/products_category_buyers_guide.html#http :// www.cisco.com/en/US/products/hw/wireless/products_category_buyers_guide.html?linkpos=4#number_4

  The accuracy of the location & performance will depend very much of your deployment of AP

• Wireless clients cannot connect to the wired client

  So, I have a server connected to the router via Ethernet, a laptop computer connected by WiFi and desktop also connected via Ethernet. The laptop used to connect to the server, but all of a sudden it no longer, and yet the Office can always connect to the server.

  I have encountered this problem before and disable SIP ALG solved the problem, SIP ALG is always off and wireless isolation is disabled for all my wireless networks, in fact before the occurrence of the issue, no changes to the router configuration. I have also excluded the firewall of the server causing problems as the issue continues to perform with her at sea, even with the laptop because it is the same with any wireless client.

  I use the version of the firmware V1.0.0.90_1.0.90, my server is running CentOS 7 and my laptop and desktop running Windows 10 Pro.

  For anyone else having this problem: I solved by powercycling (power off, wait 10 seconds and turn back on) the router.

• wireless client cannot see wired - WAG320N

  Hello

  my modem/router WAG320N works fine but the wireless client cannot see wired and vice versa. they are in the same network (192.168.0.), using the same 255.255.255.0 mask, same workgroup firewall and Yes to enable all packages in and out. IP addresses are DHCP form.

  Internet sharing works fine, but when im trying to play any game on LAN wireless clients peuvent see their car but not wired. when im trying to client ping wireless from a wired machine it does not either.

  What is intresting in a DHCP reservation or the ARP table (in router configuration) I can see cable and wireless customers. but still they do not see each other.

  help pls!

  Hi again,

  I went to PC World and they exchanged this WAG320N to another. but this time I went to ASUS RT - N16 and so far all is working correctly. I know its missing adsl modem but got usb 2 and a print server.

  Sorry cisco...

  thx for your help guys!

• WAP300N: Wireless clients are isolated from my local network?

  WAP300N is an AP, but how can we separate wireless clients who come from the WAP300 on my local network? o option NAT or IP isolation?

  This access point is not an isolation wireless feature. Even if that were the case it would only isolate wireless devices connected to each other not the LAN.

  It's something that your router will have to manage. There are several ways to do this for an example of insulation VLAN or subnet isolation.

• E2500 and e4500 maximun of wireless clients

  Hello

  I'm looking for a wireless in-home solution, however I could not see the maximum of clients wireless for an e2500or an e4500 on technical data sheets

  Kindly let me know what is the maximum amount of wireless clients that support these devices

  Thank you

  Hello. I found this information on the website linksys KB:

  3 How many computers can I connect to my router Linksys E2500?

  The Linksys router is capable of four 4 connections using an Ethernet cable and 32 computers wireless or wired devices.

  Source: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=6af0fc7147664d2eaef47a2189a1ffce_E2500_FAQs.xml&pi...

  And I think it's the same thing with the EA4500 router.