WerFault.exe

Similar Questions

• WerFault.exe continues running, using all the CPU, despite being switched off

  Although even I turned off the Microsoft error (running Vista Home Premium) report continues to use all CPU, I read a lot of geek and tech stuff after googling the problem and thought that I had found the answer.  I uninstalled a few programs that I did not, and he was glad that the problem has disappeared.  After one episode a week, he started to reproduce.  Even when I open Explorer and Windows Task Manager just. WerFault.exe executes two threads.  All the answers?  I hope of course!  Thank you

  How is your question about the Windows Update feature?

  I think you'd better post instead in one of these forums:

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/threads

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Recurring Werfault.exe takes 99% CPU as

  Hello world
  I came across a problem today with Werfault.exe. He showed up and quickly took about 100% of my CPU capacity, leaving me very little to work with (Vista) at very low speed. I have high speed internet, 2.3 GHz and 4 GB of RAM.
  I went to Control Panel/System & Maint/Problem Reports and Solution/changing settings / settings advanced and disabled Windows Error Reporting for all on the network (desktop and laptop) and restarted. You know: Werfault.exe showed once again in the Task Manager.
  I went to Windows Update, downloaded everything there was to download (most non-essential), restarted, my friend Werfault.exe returned. Pretty upset had at that time.
  Tried all sorts of other things, none are effective, but you try in the hope that something works.
  Finally, I got back into the Task Manager and noticed, you can highlight an offending exe and basically have using the 'End process' button at the bottom of the page, to the right. As usual, Werfault stood in two lines and share all my processor capacity.
  For about 10 minutes, my CPU was a flexibility again after my action in the Task Manager. Then, the first Werfault came back, followed by "SearchIndexer.exe. I have seen that before - SearchIndexer after a brief period will replace Werfault.exe and we're back to square one.
  Obviously, this approach works only a very short period of time.
  It does not seem just to turn off something without going to the cause of why the 'belle' Werfault.exe arises in the first place.
  I looked at a few sites on the web, but most do not receive further that 'disable Werfault in the controil Panel settings', which I did until I saw it.
  So, I'm stuck. Windows O.S. is suffocating my computer by sending reports of Windows. Makes you think about how stubborn wrote the script for this type of help from Microsoft.
  OK guys from Microsoft, if there is someone who knows how to get rid of the cause, but also a symptom of this error, it must be you. I hope you can help me as soon as possible.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Following the advice of Christmas, I found the root of the problem rather than knock off the symptoms.

  Go to the observer of events (EVENTVWR. MSC in the search bar). You should start the Event Viewer (Local).

  Top of page is "Summary of administrative events" with a series of Types of events. For me, it shows that I had 206 errors in the last hour, 6000 in the last day... and it got worse after that.

  So, I expanded the section 'Error' and found the ad that was originally the most errors. For me, it was pretty far down the list, but he had 192 206 errors in the last hour, so I clicked on 'Application Error'. I double-clicked, and he brought me to a new page.

  The new page is a description of what goes wrong, but what you REALLY need to do is look at the first line of the large gray box. It will tell you: "Application failed BlahBlahBlah.exe" or something. Once you have a name for the author, you can search your own computer for that and see that he is related to or search the Internet.

  For me, my problem was service of nProtect netizen I picked up during the use of the internet in Korea. I guess it was panic now that I'm no longer in Korea. Then I uninstalled the nProtect service and BAM, no more WerFault.exe hogging my resources.

  Seriously guys. Look for the source. Your computer slows down due to the creation of report Windows, but this Windows error reports? Fix THIS, and you did.

• Werfault.exe error message

  I get this message when you try to open the Panel and windows programs. such as the backup and restore: Werfault.exe - Application error - error exception invalid statement - an attempt was made to execute an illegal instruction. (0xc000001d) occurred in the application at location 0x7730b5f1. I can't use the execution of orders, so, how do I fix? It all started when this woman came and put his camera card in my printer and print a photo she had taken. Please help, because I'm considering a format, which I don't want to do unless absolutely necessary. Thanks for your help.

  Hi Eburner,

  Werfault.exe is used to Windows error reporting. This is a feature that allows Microsoft to track and address errors related to Windows features, the operating system and applications. It offers you the opportunity to send data about errors to Microsoft and to receive information on the solutions.

  You can access here Windows error reporting settings: Control Panel > system and Maintenance > Problem Reports and Solutions > change settings > advanced settings

  Method1

  I suggest that you stop and restart the Windows error reporting service on the computer and check later if the problem persists.

  (a) click Start menu and type services.msc in the search box and press ENTER.

  (b) in the service list, navigate to the Windows error reporting service.

  (c) right-click and click Properties now to stop the service and restart it.

  (d) click on apply and OK

  Check if the problem persists.

  Method 2

  If the previous step fails then I suggest that you perform the clean boot procedure to check whether a third-party program installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• solution for substitution of com does not and werFault.exe problems

  I installed i mesh and later he not unhooked with firefox and can now does not start any programs of microsoft office or googlechrome and get error messages inclunding substitution of com does not, the instruction at 0 x 740 referenced memory at 0x740d0320. The memory could not be written. Click on JO to finish the program how to fix this? Another message is the bearer of com does not work

  Hello

  See if that helps you.

  "Difficulty of COM Surrogate has stopped working error in Vista"

  http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/

  "How to stop Werfault.exe.

  http://www.ehow.com/how_5085062_stop-werfaultexe.html

  See you soon.

• Very heavy use of the processor because werfault.exe

  My machine is extremely slow due to werfault.exe.  Manager tasks shows the use of the CPU to 100% all the time.  The processes tab shows 2-3 instances of werfault.exe using all of the CPU resources.  This continues indefinitely and a reboot does not fix it.  The only way I could do my usable computer is by stopping the Windows error reporting service.  However, I fear that this eliminates simply a symptom and not the underlying problem.

  I also met the very high disk activity.  I disable 'Run on a calendar' in the fragmenteur disk (after I did a full defragmentation) and I've also eliminated Super Fetch.  He did reduce significantly the disk activity, but there are always times when the hard drive is busy and I see no reason for this.

  You go to 'Services' to disable werfault.exe.  Click on the Windows button or what it is called in Vista (the thing that replaced the 'Start' button in XP).  Enter 'Admin Tools' in the search box.  Right click on "Services" and then click "Run as Administrator".  After that 'Services' opens, search for "Windows Error Reporting Service".  Double-click it, and then you can stop it and turn it off.

  I'm not having any luck with either.  Now as I type this, there are 2 instances of werfault.exe race and each consuming more than 40% usage.  "Problem reports" and Solutions show nothing.

  It started shortly after I had installed Vista.  I had finished not even install all applications - perhaps began after installing SP2.

  I think that I will reinstall Vista.  If the problem comes back, I'll have to go back to XP.

• werfault.exe, windows does not

  I met some problems recently with the performance of my laptop, virtually overnight. Explorer Windows and internet explore become often does respond not by me simply doing whatever it is in a window and it causes other programs such as Windows Media Player to struggle to work, among other programs (MSN messenger, etc.). I tried to send an error report to get a WerFault.exe - application window error, mention an instruction to memory x.eferenced 0 x 0... Required data has not been placed in memory due to an error of e/s to 0xc. Does anyone have solutions to this problem? Any help is appreciated!

  My laptop set repair today, it seems it there's only a problem with the hard drive and therefore will have to fix. Thanks for the assistance provided in any case!

• 100% use UC associated werfault.exe

  Because I downloaded Vista SP2 about 2 weeks ago, my computer has been incredibly slow.  I ran all the spyware & antimalware - nothing.   Finally checked my CPU speed and I am 100% CPU usage with two threads werfault.exe using about 95%.  I cleaned records too, nothing.

  Hi Scoreboardman,

  Follow the instructions below to start your computer in clean boot mode which may help you to resolve the issue.

  Note: When you perform a clean boot, you temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  Uninstall or update the program that is causing the problem.
  After reviewing the issue, put the computer into Normal mode.

  If you still experience the problem, try to disable error reports. When disable you error reports, werfatult.exe stops working.
  To do this, follow these steps:
  1. Click Start, then Control Panel to open the corresponding window.
  2. click on system and Maintenance.
  3. then, click reports on the problems and Solutions.
  4. now in the left panel of the problem reports and Solutions window click on the settings and then click Advanced settings.
  5. click on disable to disable error reporting.
  Check if you are still having the same problem. Make sure you have re-enabled the service after having checked the question.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Windows Error Reporting service stopped recording of events in the event log, and now when it spawns werfault.exe, the process consumes the CPU until he is killed.

  Windows error reporting service ceased to record events in the event viewer. The last successful entry was 26/03/2010. Since then whenever the service generates Werfault.exe to handle the error, the process seems stuck in a loop of consumer processor, but do nothing. It uses 99% of CPU (80% preferred), is not e/s and number of handles, thread, & working set do not develop.

  Three Windows updates were installed in shortly after the last successful log entry (automatic update is enabled):

  KB915597 def 1.79.702.0 & def 1.79.495.0 both for Windows Defender

  KB980182 for IE 7

  I think that my system is clean, at least Spyware Doctor think it is. I also did some tests Ad-Aware. Windows Defender analyzes every day without error.

  Has anyone else encountered this problem?

  Hi Wannknow,

  It's good information - and thanks for the thanks! You really only need to run an adware or virus (malware) program at the same time. What I would recommend is that you choose an adware program - either "Windows Defender" or "spyware doctor" and disable the other. This can be your root problem, so at this point I turn back on 'report of problems and solutions' and see if you experience the same problem:

  Again, here are the instructions:

  1. open Control Panel. (Press Ctrl-ESC and type 'control' is faster access method).

  2. click on "System and Maintenance" and then click "problem reports and solution."

  3. click on change settings in the left panel of the problem reports and Solutions window.

  4. Select Advanced settings.  In the "for my programs, problem report is: ' select 'off '. Click on CLOSE the

  Hope this helps,

  Steve <> Microsoft partner

• ! 00% CPU use due to Multiple Instances of WerFault.exe running on Vista SP2 computer

  I recently reinstalled Vista (reinstall clean due to the failure of the hard drive to the new hard drive) and SP2 and all updates available. I think WerFault.exe works sporadically (up to 5 instances at a time) using 100% cpu. This makes my system unusable. I end the prossess (s) by using the Task Manager, but they keep restarting. I tried the error report auto disablinf and made many analyses of malware with various reputable antivirus/antispyware programs that have all found nothing sinister. I do not have insalled all programs that I didn't have prior to reintalling Vista. I had never experienced this problem during the four years that I've been running Vista. Any suggestions?

  Werfault.exe is the windows error reporting service. type 'services' in the search from the start menu, right click on the "error reporting service Windows" and choose "Properties". In the drop-down list "Startup type", choose "disabled", then restart your computer.

• WerFault.exe continues to use all CPU, despite Microsoft Error Reporting turned off.

  Although even I turned off the Microsoft error (running Vista Home Premium) report continues to use all CPU, I read a lot of geek and tech stuff after googling the problem and thought that I had found the answer.  I uninstalled a few programs that I did not, and he was glad that the problem has disappeared.  After one episode a week, he started to reproduce. It could be something else to do, but I can't locate the forum who suggested to uninstall programs.   Even when I open Explorer and Windows Task Manager just. WerFault.exe executes two threads.  All the answers?  I hope of course!  Thank you

  When WerFault.exe turns that means that other tools have crashed. Reactivate the WER service and check the item 'Problem and Solution' applications that crashed the last days.
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• WerFault.exe - perl.exe has stopped working

  Hello

  I get a WerFault.exe with a perl.exe has stopped working.

  I want to know who to treat and where exactly in the process leading to it.

  How is that possible?

  Perl.exe help block anti-spam email. If you use Outlook, we suggest a repair an Office application.

  You can also use the System File Checker to see if there are any corrupt system files associated with Perl.exe. For instructions, please see this article: https://support.microsoft.com/en-us/kb/929833.

  Kind regards.

• Error code: WerFault.exe - Application error

  I use Windows 7 and get an error Code

  WerFault.exe - Application error

  The Instruction at 0xfcf9c9fe reference memory 0 x 00000001. The memory could not be written. Click here to put an end to the program.

  How can I fix it?

  
  

  Hi Mel9543,

  ·         When you get this error message?

  Werfault.exe is used to Windows error reporting. This is a feature that allows Microsoft to track and address errors related to Windows features, the operating system and applications. It offers you the opportunity to send data about errors to Microsoft and to receive information on the solutions.

  You can access here Windows error reporting settings: Control Panel > system and Maintenance > Problem Reports and Solutions > change settings > advanced settings

  Try to disable it temporarily and see if this will fix the problem.

  As a temporary solution you can disable the error reporting service: Press Win + R, type services.msc find Windows Error Reporting service in the services list, make a right click on it-> click Properties-> open list "Startup type" and select "Disabled"--> press OK.

  Then check and see if you still get the error werfault.exe on opening the programs.

  Since you have just installed Windows 7, please check you have all your device drivers updated to a version of Windows 7. If you can't do it in normal mode, then go to safe mode and check device manager.

  See the link for update drivers: update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  For a similar question, see the link: http://social.answers.microsoft.com/Forums/en-US/w7programs/thread/ad18ac26-105e-4930-9024-6de26ed55e30

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 WerFault.exe & wermgr.exe Application error

  After recently reinstall Win7 Windows Vista (which has been installed on Windows XP) on my computer began spewing WerFault.exe and wermgr.exe application errors

  I tried everything I installed AVG and scanned it returned without flaws but it becomes serious when I try to download or use automatic updates it Kicks me out or does not apply the changes I made

  "I tried Safe Mode and it does not work and when I ask new programs to install as Windows fixit he returns with an error.

  Extended attributes are incompatible"I'm about to give up with the computer if there is anything I can do please reply with MI awnser about to stop trying

  Hi Alex,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you get an error message.

  This could be due to corruption of system files.

  Try the methods.

  Method 1:

  I suggest you perform a Scan SFC and check if it helps.

  Check the following link below.
  https://support.Microsoft.com/en-us/KB/929833

  Note: Although SFC analysis I recommend that you ensure that there are no applications or programs running on the background.

  Method 2:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software. The Microsoft Security Scanner is a security tool free that provides analysis on demand and helps remove viruses, spyware and other malicious software. It works with your current Antivirus software. See the link to download and run the Analyzer:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Multiple Instances of werfault.exe

  It is common to have 6 instances of werfault.exe runs?

  Hello Tom,

  Thanks for update.

  It seems that the problem is solved.

  However, if re-problem persists, you can run DISM.

  Please do not hesitate to answer, if you have any other concerns about Windows.

  Thank you