What are the ports SATA of the notebook HP Pavilion DV6, model LZ495E

Hi all

I used the HP Pavilion DV6-6152er, model LZ495E #ACB

Laptop got Toshiba MK5061GSYN with Serial ATA 3.0 Gb/s hard drive

This phone has on chipset HM65, who have SATA2 and SATA3 ports

My question what is port (speed) that comminicated on the hard drive?

I know that dvd writer connected to the SATA2 (3.0 Gb/s)

I want to upgrade, install wiith SSD SATA3 (6.0 GB/s)

Concerning

Advertisement

Hello

You can check it out yourself using the following tool:

http://www.cpuid.com/downloads/PC-Wizard/2014.2.13-Setup.exe

When executing the program, look under the heading "number of disk controller. It will show you the speed as indicated:

Kind regards.

Tags: Notebooks

Similar Questions

  • HP HDX X18T - 1200 CTO Premium: what are the ports on the HP HDX X18T notebook PC - 1200 CTO Premium

    What are the different ports on the HP HDX X18T-1200 CTO Premium Notebook PC ?

    USB 2.0 port and which is 3.0?

    USB 3.0 will have a blue Center tab or a "SS" logo next to it, or both.

  • What are the security risks to open port 80 on workstations?

    Hi all

    in our environment, there is an application that opens port 80 on workstations when it is installed, but it is not allowed on preimeter FW

    could you please tell what are the security risks for leaving port 80, opened on the workstations? or it is considered to be safe unless it is not allowed on the preimeter FW?

    Thank you & best regards

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.technet.Microsoft.com/forums/en-us/home

    http://social.msdn.Microsoft.com/forums/en-us/home

  • What are the ports used by the Cisco VPN Client?

    Hello

    I need to open my outgoing traffic on my firewall to allow two interns (LAN) Cisco VPN Client to connect to their Internet virtual private network.

    I already opened the port 500/UDP, but they are not able to connect. If I open all outgoing ports, they can connect.

    What are the ports used by the Cisco VPN Client?

    Thank you

    You need to open:

    UDP 500

    ESP protocol

    You must also open the UDP 4500 port (if using NAT - T).

    In addition, if the clients are connecting to a VPN 3000 Concentrator series and it is configured for all other options of NAT-transparency, corresponding ports must be open. By default:

    1. If using IPSec over TCP 10000, then open TCP 10000.

    2. If using IPSec over UDP 10000, open UDP 1000.

  • Cisco VPN Client - what are the ports I need to open the 1841?

    Hello. As it says on the Tin really, what are the ports I need to allow my access on our 1841 list to allow the Cisco VPN client on through it?

    Ta

    UDP 500 (isakmp)

    UDP 4500 (nat - t)

    Protocol ESP 50

  • What are the default ports in the firewall of the ESX ESX Server groups

    Hi all

    Greetings to all!

    <! [endif] > <! [if gte mso 9] >

    I'm new to vmware. I have some experience in Linux. I need to work with EXES

    Firewall. Can someone help me with firewall ESX.

    Suppose for example, that if I need to block some ports or open a

    port to a particular network. (Clamping server)

    And I would like to know what groups of ports in ESX

    Server and what are the default ports

    ESX Server available groups

    While the physical switches have ports to which you can connect, virtual switches have groups of ports. The types of Group 3 port are machine virtual port group, port console and vmkernel service groups

    Méhul

    PS: If you find answers correct or useful, please consider giving points!

  • What are the ports need to be open?

    I'll put up my fmis to stream video through rtmp and http.

    I'm on a network locked.

    What are the ports must be opened to allow people outside the network access to the rtmp/http stream?

    Am I correct to say the only port 80 and 1935?

    Yes... 80 and 1935 is what you need for RTMP and HTTP Proxy downloads connections. If you want to use RTMPS, you must also open 443.

    If you want to be able to use the administration service and the administration console, you must also open 1111

  • What are the different ports used by BTA?

    Having recently had 'fun' to getting a load agent working in our secure local network, I was wondering if someone could clarify what are the different ports to/from?

    I am aware of the following:

    9001 actually mentioned when you configure a load agent
    1099 mentioned when you configure a data collector
    1098 -? necessary for the agent to load (I would hazard a guess to this also being the collector of linked data)
    4444 -? necessary for the agent to load
    7071 -? necessary for the agent to load

    I had also the following ports was told by looking at similar issues (but they didn't need opening in my recent exercise):

    7073
    8083
    8088

    I also suggested that information added to the knowledge base article (Doc - ID: 787226.1) because they may need to open on the firewall.

    Ian

    Oracle.port.RMI = 4444
    Oracle.port.http = 8088
    Oracle.port.empstart = 9001
    Oracle.port.uil2 = 7071
    oracle.port.dataCollector = 7073
    Oracle.port.WebService = 8083
    Oracle.port.JNDI.rmi = 1098
    Oracle.port.JNDI = 1099
    Oracle.port.HTTPS = 8433

    You can change the ports

    - \EmpAppServer\server\default\conf\oracle.propertie

    The following ports are used between load tests of Oracle for Server Web Applications and the Machine of the Agent itself:

    * 9001 (the agent communication port)
    * 1099 (Datacollector Comunication Port)
    * 8088 (for running scripts OpenScript)

    Concerning

    Alex

  • I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

    I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

    Anything can be corrupted on your MacBook Pro, but from what you say, it seems that the cable drive/SSD/flash memory/SATA hard was seriously damaged. Him "question mark" means that your Mac is unable to find any bootable device, meaning that it does not yet detect your OS X drive.

    You should make a backup of your files (if you can still do it) and take the Mac at the Apple Store or dealer to get a diagnosis. There may be several damaged parts.

  • Re: What are the properties of the SSD used in Tecra R10

    Hello

    Does anyone know what are the features of the ssd drive?
    128GB but what manufacturer? I need all the features of the SSD for the Tecra R10.

    Thanks for your help ;)

    Hello

    I have found these details:
    The SSD drive that was installed in the Tecra R10 - 10J is a
    -128 GB SSD
    -10 MB buffer size
    -SATA interface
    -Size (mm) 9.5 mm
    -Weight 66g (Max)

    That s all I can say about this SSD hard drive

  • Reinstall XP on Portege R600 - what are the necessary drivers?

    Hello

    I am plan to reinstall windows, since something (a driver/program/idontknowwhat) seem to access my hard drive at random times (often), which means that ever, it stops turning and still makes noise. It was already the case (but a little less than now) with preinstalled system, even with wdfrgmgr.exe disabled and without using a swap file on the hard drive, so since I don't know what are the causes (is - anyone here know?) and since it seems impossible to upgrade to an SSD, I'll just install a clean winXP install only necessary basic stuff (especially not all control panels).

    I would like to know what drivers from the Web site are essential and those that are not.
    I'll definitely install base drivers common Module, driver Display Driver LAN, HDD Protection Utility, Power Saver, his Driver, Touch Pad Driver, Webcam Driver, Wireless LAN Driver (Intel).
    I will not install (but maintaining install files on my disc for emergencies) acoustic silencer, Assist, Bluetooth Monitor, controls, cooling running Diagnostic tool, DVD player, Management Console, password, PC, PC monitor diagnostic, tool utility utility boot memory SD SD utilities, security help, SSD Alert, power utility Touchpad utility , USB Sleep & charge utility, utility zoom. I'm missing something essential (and obviously not in name) by installing is not it?

    * Now my other question: which with other drivers? I don't know what they are doing here is so my doubts since the following drivers: *.

    (1) pilot 3 G and 3 G RF power control utility: is this necessary if I never use it, or do not install the power utility will lose power (thus reducing my battery life?)

    (2) Intel Active Management Technology and Intel Matrix Storage Manager: is it necessary that the machine works correctly? I can't find the right information anywhere.

    (3) chipset utility: I am surprised it is not called driver... it is some control panel I don't need or is it actually a driver?

    (4) ConfigFree, hotkey wireless and Wireless Manager: my wireless internet will work without it?

    (5) display device Exchange & Hotkey utilities for display devices: these do what exactly?

    (6) microphone effect: is it only the echo canceller or also a necessary micro driver?

    (7) mobile Extension: what is it exactly?

    (8) trusted Platform Module: is it necessary to install this if I am not using any other explicitly related function?

    (9) public services: this product contains all I need to install the drivers? Or is it just a bunch of utilities like his name?

    Thanks in advance!
    Peter

    (1) you have not need drivers 3 G, if you do not use 3 G

    (2) Yes, you need to install these devices from Intel, they are important.

    (3) the Chipset driver is probably the most important of all drivers. Toshiba common modules is also very important. You must install these two before anything else.

    (4) Yes, we must still work. You can install the keyboard shortcut, so you can enable or disable Wifi on and outside

    (5) you need to install these, they support some features of the Fn key, so you can use an external monitor, etc...

    (6) I don't think that you will need. If you encounter problems with microphone, install

    (7) install the Mobile Extensions if you have a Port Replicator.

    (8) If you do not use the TPM encryption, simply disable it in the BIOS

    (9) you must install the utilities, so you can change the hardware settings within Windows.

  • What are the options I have to 'in' sound on a new iMac?

    What are the options I have to 'in' sound on a new iMac?

    Almost all recent Macs I've seen have a Line In port which can either accept a stereo 3.5 mm to RCA, stereo input analog line or a Mini-TosLink digital connection for S/PDIF (2 channels).  If you need more audio input or need to enter that is not as intensive machine - you will need to invest in an audio interface.

  • Qosmio F10-122: what are the pinouts of D-Terminal to connect the digital TV via HDMI

    I have the D-Terminal cable SCART, but this only works in analog (PAL) resolution.
    What are the pinouts of D-Terminal on nVidia FX Go5700 of GeForce to connect to a digital TV via HDMI and use higher resolutions?

    The F10 does not support HDMI port. It supports only the output port component.

    I've goggled a bit and found that you can use a HDMI adapter component
    There are also some adapters that support the resolution of the computer of the 1920 x 1200 px and 60 hertz
    So, you can connect this device to a monitor with HDMI port.

    Google for adapter * Gefen component and HDMI *.

    Good bye

  • What is the difference between AXIEM and EMSIght? What are the benefits of AXIEM by EMSight if any?

    I wonder what are the differences between AXIEM and EMSight. Are associated with application? One is better than the other? Please explain.

    AWR estimated AXIEM most powerful plan EM Simulator around.   AXIEM is at the center of continuous research and improvement, while EMSight is only worked on if revealed serious flaws.  Here is a summary of the differences:

    Mesh

    • EMSight must mesh the nearest grid drivers using rectangles.  This causes the mesh to have more elements mesh when there are small and large geometries.  The grid should be small enough to capture the small geometry but then causes large geometries to mesh more.   In addition, angled or curved structures causes inefficiencies mesh.

    • AXIEM STS forms, rather than a grid.  In addition, the mesh can be rectangle or triangle.   This allows a much more efficient mesh.   AXIEM generally have a much more efficient

    • AXIEM contains the ability to process forms to clean geometries that cause inefficiencies of the mesh.  EMSight does not have this feature.

    • AXIEM can forms thick metal mesh, EMSight can not, and user must make approximations when thick metal will change coupling (loss is recorded properly with the thickness of the metal)

    Ports

    • The ports are for the most part similar, but parasites due on AXIEM ports are less.  In addition, the AXIEM has a side wall, thus the effects of not move of the terms of reference of the edge of the line are a lot less AXIEM in.

    • Ports can be added to most any place in geometry with AXIEM.  For EMSight, the ports are usually only added outside the geometry and have limitations to the aircraft on either side of the reference speaker.

    Problem solvers

    • EMSight does not have a low frequency Solver.  Stop low-frequency and then extrapolate to DC.  This usually works well, but you must take into account if the extrapolation is accurate.  AXIEM presents both a low and high frequency Solver so will do better in a low frequencies generally much better in DC.

    • Solver of EMSight scales O (n) ^ 2 for memory and O (n) ^ 3 for the moment.   It has a special algorithm to break the question of memory, but the question of time is the killer.  AXIEM has a direct Solver which scales in the same way and an iterative Solver which will scale O (nlogn).   In other words, AXIEM can solve a lot of bigger problems than EMSight.

    • Several AXIEM processes are multithreaded as EMSight.

    Speaker

    • EMSight is inside a perfect driver side wall.   This works well if you the circuit is in the same cavity.  If not, you must know the rules of them on to the forms of space of the flanks and how that much to extend the port could reference planes.   AXIEM is not here.   AXIEM does not currently have to simulate a perfect driver side wall.

    I don't know that I missed a few aspects of the tools.   From the point of view of the AWR that AXIEM is the tool of choice, except in a few cases have been EMSight may be required.

  • What are the network requirements for the remote server of the Panel?

    What are the network requirements for the remote server of the Panel?

    I tried for awhile now to set up a Control Board.  I can connect to my remote panel of computers from other computers on my local network but nowhere else.

    Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.

    When I try to connect with the Operate > Connect to... remote control, I get this error message:

    "Connection to Server remote panel...".
    "Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.

    I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi.  Is there some network settings or firewall I'm not seting?  Would it be my server or the router or the private network?

    My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile.  Is it still feasible?

    As he Turners on my router had to be put in place so that my Port is in the rage of transfer.  Also I had to disable DHCP.  Without that you cannot host behind a router.

    These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2

Maybe you are looking for


HashFlare