What client can connect to the server ESX 2.5.2?
Asked me to restart a computer virtual running in ESX Server 2.5.2. Y at - it a client vSphere for this or do I need something else? I started with VMWare 4.0.0 if this old box is a bit before my time...
I found what I needed in this reference http://www.vmware.com/pdf/esx25_admin.pdf
Look at page 79 for the overview: using the VMware Management Interface
Then on page 82 for details: using Internet Explorer 6.0 to access the VMware Management Interface
It doesn't seem to work best with Internet Explorer 6. I had no luck with IE7, but don't spend too much time on him.
See you soon
Tags: VMware
Similar Questions
-
Can connect to the server (although very slowly) but unable to connect to the internet
Original title: network connectivity
I have a user who has been connected to the internet through our SBS server. All of a sudden, it can connect to the server (although very slowly) but unable to connect to the internet. The network and sharing shows that it is connected to a public network not by the domain server.
I hooked another computer for network wiring and it worked fine. I changed the wiring, and it still doesn't work.
Any ideas?
Thank you
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it -
VSphere Web Client cannot connect to the server vCenter Single Sign On.
I'm running the virtual appliance of the trial 5.5.0.20400 build 2442330 on ESXi 5.5.0, 2068190
While I try to log on to the Web Client, I get this error. VSphere Web Client cannot connect to the server vCenter Single Sign On.
I put fallow the steps to disable SSO by changing the webclient.properties line add file and ad sso.enabled = false . Then on the vCenter Server Appliance, restart the vSphere client service by typing service vsphere-client restart .
I enclose the reference files.
All ideas will be useful
This answer was simple, all I had to do was remove the # in front of the statement in the file. and SSO has been disabled after the restart of the service.
-
How is the View Client to connect to the server has failed?
Hello
I have already set up the laboratory of Horizon view. But when I was about to connect to VM via View Client, an error message appeared.
Pls check the photos attached. It seems that view Client connected to the server, but the recovery failed sources to the broker. And the average while servers introduced a healthy state in administrator mode.
Step:
1. launch View Client and login entry server IP address.
2. a box will appear that him want to make sure that the server cannot be trusted. Then click on "continue".
3. Enter the credentials, and then click "connect" button
4. the error: "error: invalid server URL.
What happened there? I have worked all day, still can not understand.
No matter which help out me? Thank you.
Step 1:
Step 2:
Step 3:
Don't know if "_" is valid in a FULL domain name, try something else which corresponds to the period of investigation.
Linjo
-
Hello everyone
Is there anyone know how many client can be connected same time on microsoft VPN Server?
Thank you
Original title: VPN Windows Server 2012
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Cisco ASA 5510 - Cisco Client can connect to the VPN but cannot Ping!
Hello
I have an ASA 5510 with the configuration below. I have configure the ASA as vpn server for remote access with cisco vpn client, now my problem is that I can connect but I can not ping.
Config
ciscoasa # sh run
: Saved
:
ASA Version 8.0 (3)
!
ciscoasa hostname
activate the 5QB4svsHoIHxXpF password / encrypted
names of
xxx.xxx.xxx.xxx SAP_router_IP_on_SAP name
xxx.xxx.xxx.xxx ISA_Server_second_external_IP name
xxx.xxx.xxx.xxx name Mail_Server
xxx.xxx.xxx.xxx IncomingIP name
xxx.xxx.xxx.xxx SAP name
xxx.xxx.xxx.xxx Web server name
xxx.xxx.xxx.xxx cms_eservices_projects_sharepointold name
isa_server_outside name 192.168.2.2
!
interface Ethernet0/0
nameif outside
security-level 0
address IP IncomingIP 255.255.255.248
!
interface Ethernet0/1
nameif inside
security-level 100
IP 192.168.2.1 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 100
IP 192.168.1.253 255.255.255.0
management only
!
passwd 123
passive FTP mode
clock timezone IS 2
clock summer-time EEDT recurring last Sun Mar 03:00 last Sun Oct 04:00
TCP_8081 tcp service object-group
EQ port 8081 object
DM_INLINE_TCP_1 tcp service object-group
EQ port 3389 object
port-object eq ftp
port-object eq www
EQ object of the https port
EQ smtp port object
EQ Port pop3 object
port-object eq 3200
port-object eq 3300
port-object eq 3600
port-object eq 3299
port-object eq 3390
EQ port 50000 object
port-object eq 3396
port-object eq 3397
port-object eq 3398
port-object eq imap4
EQ port 587 object
port-object eq 993
port-object eq 8000
EQ port 8443 object
port-object eq telnet
port-object eq 3901
purpose of group TCP_8081
EQ port 1433 object
port-object eq 3391
port-object eq 3399
EQ object of port 8080
EQ port 3128 object
port-object eq 3900
port-object eq 3902
port-object eq 7777
port-object eq 3392
port-object eq 3393
port-object eq 3394
Equalizer object port 3395
port-object eq 92
port-object eq 91
port-object eq 3206
port-object eq 8001
EQ port 8181 object
object-port 7778 eq
port-object eq 8180
port-object 22222 eq
port-object eq 11001
port-object eq 11002
port-object eq 1555
port-object eq 2223
port-object eq 2224
object-group service RDP - tcp
EQ port 3389 object
3901 tcp service object-group
3901 description
port-object eq 3901
object-group service tcp 50000
50000 description
EQ port 50000 object
Enable_Transparent_Tunneling_UDP udp service object-group
port-object eq 4500
access-list connection to SAP Note inside_access_in
inside_access_in to access extended list ip 192.168.2.0 allow 255.255.255.0 host SAP_router_IP_on_SAP
access-list inside_access_in note outgoing VPN - PPTP
inside_access_in list extended access permitted tcp 192.168.2.0 255.255.255.0 any eq pptp
access-list inside_access_in note outgoing VPN - GRE
inside_access_in list extended access allow accord 192.168.2.0 255.255.255.0 any
Comment from inside_access_in-list of access VPN - GRE
inside_access_in list extended access will permit a full
access-list inside_access_in note outgoing VPN - Client IKE
inside_access_in list extended access permitted udp 192.168.2.0 255.255.255.0 any isakmp eq
Comment of access outgoing VPN - IPSecNAT - inside_access_in-list T
inside_access_in list extended access permitted udp 192.168.2.0 255.255.255.0 any eq 4500
Note to inside_access_in of outgoing DNS list access
inside_access_in list extended access udp allowed any any eq field
Note to inside_access_in of outgoing DNS list access
inside_access_in list extended access permit tcp any any eq field
Note to inside_access_in to access list carried forward Ports
inside_access_in list extended access permitted tcp 192.168.2.0 255.255.255.0 any DM_INLINE_TCP_1 object-group
access extensive list ip 172.16.1.0 inside_access_in allow 255.255.255.0 any
outside_access_in of access allowed any ip an extended list
outside_access_in list extended access permit tcp any any eq pptp
outside_access_in list extended access will permit a full
outside_access_in list extended access allowed grateful if any host Mail_Server
outside_access_in list extended access permit tcp any host Mail_Server eq pptp
outside_access_in list extended access allow esp a whole
outside_access_in ah allowed extended access list a whole
outside_access_in list extended access udp allowed any any eq isakmp
outside_access_in list of permitted udp access all all Enable_Transparent_Tunneling_UDP object-group
list of access allowed standard VPN 192.168.2.0 255.255.255.0
corp_vpn to access extended list ip 192.168.2.0 allow 255.255.255.0 172.16.1.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
management of MTU 1500
pool POOL 172.16.1.10 - 172.16.1.20 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 603.bin
don't allow no asdm history
ARP timeout 14400
NAT-control
Global (outside) 2 Mail_Server netmask 255.0.0.0
Global 1 interface (outside)
Global interface (2 inside)
NAT (inside) 0-list of access corp_vpn
NAT (inside) 1 0.0.0.0 0.0.0.0
static (inside, outside) tcp Mail_Server 8001 8001 ISA_Server_second_external_IP netmask 255.255.255.255
static (inside, outside) tcp Mail_Server 8000 ISA_Server_second_external_IP 8000 netmask 255.255.255.255
static (inside, outside) tcp Mail_Server pptp pptp netmask 255.255.255.255 isa_server_outside
public static tcp (indoor, outdoor) Mail_Server smtp smtp isa_server_outside mask 255.255.255.255 subnet
static (inside, outside) tcp 587 Mail_Server isa_server_outside 587 netmask 255.255.255.255
static (inside, outside) tcp Mail_Server 9444 isa_server_outside 9444 netmask 255.255.255.255
static (inside, outside) tcp 9443 Mail_Server 9443 netmask 255.255.255.255 isa_server_outside
static (inside, outside) tcp 3389 3389 netmask 255.255.255.255 isa_server_outside Mail_Server
static (inside, outside) tcp 3390 Mail_Server 3390 netmask 255.255.255.255 isa_server_outside
static (inside, outside) tcp Mail_Server 3901 isa_server_outside 3901 netmask 255.255.255.255
static (inside, outside) tcp SAP 50000 50000 netmask 255.255.255.255 isa_server_outside
static (inside, outside) tcp SAP 3200 3200 netmask 255.255.255.255 isa_server_outside
static (inside, outside) SAP 3299 isa_server_outside 3299 netmask 255.255.255.255 tcp
static (inside, outside) tcp Mail_Server www isa_server_outside www netmask 255.255.255.255
static (inside, outside) tcp Mail_Server https isa_server_outside https netmask 255.255.255.255
static (inside, outside) tcp Mail_Server pop3 pop3 netmask 255.255.255.255 isa_server_outside
static (inside, outside) tcp imap4 Mail_Server imap4 netmask 255.255.255.255 isa_server_outside
static (inside, outside) tcp cms_eservices_projects_sharepointold 9999 9999 netmask 255.255.255.255 isa_server_outside
public static 192.168.2.0 (inside, outside) - corp_vpn access list
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.2.0 255.255.255.0 inside
http 192.168.1.0 255.255.255.0 management
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp - esp-md5-hmac transet
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto-map dynamic dynmap 10 set pfs
Crypto-map dynamic dynmap 10 transform-set ESP-3DES-SHA transet
cryptomap 10 card crypto ipsec-isakmp dynamic dynmap
cryptomap interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
No encryption isakmp nat-traversal
Telnet 192.168.2.0 255.255.255.0 inside
Telnet 192.168.1.0 255.255.255.0 management
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd dns xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx interface inside
dhcpd domain.local domain inside interface
!
a basic threat threat detection
host of statistical threat detection
Statistics-list of access threat detection
Management Server TFTP 192.168.1.123.
internal group mypolicy strategy
mypolicy group policy attributes
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value VPN
Pseudo vpdn password 123
vpdn username attributes
VPN-group-policy mypolicy
type of remote access service
type mypolicy tunnel-group remote access
tunnel-group mypolicy General attributes
address-pool
strategy-group-by default mypolicy
tunnel-group mypolicy ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the pptp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:b8bb19b6cb05cfa9ee125ad7bc5444ac
: end
Thank you very much.
Hello
You probably need
Policy-map global_policy
class inspection_default
inspect the icmp
inspect the icmp error
Your Tunnel of Split and NAT0 configurations seem to.
-Jouni
-
Maxl on the client to connect to the server computer running remote essbase
Hi all
I am able to connect to essbase on a client computer using the link:
http://ts119licalnn.AC.local:9724 / easconsole
However, when I try to connect via MAXL on the client machine, I get the following error...
Essbase MaxL Shell - release 11.1.2 (ESB11.1.2.2.100B2166)
Copyright (c) 2000, 2012, Oracle and/or its affiliates.
All rights reserved.MAXL > connection JDOE JDOE212 on ts119licalnn.ac.local:9724;
ERROR - 103 - Essbase unexpected error 1030818.
Error - 1042017 - network: Timed out before receiving all the data.
ERROR - 1030818 - login failed. Please check if the server and port are correct.
If you receive timeout or handshake failure, please check if you have tried a bitch
CT to secure without keyword secure or clear with the keyword secure port...Is the host name in maxl the same name as the name in the link easconsole? do I need to configure anything (tnsnames.ora) to maxl work?
Thanks in advance.
The essbase server name is ts119licalnn, it is displayed in essbase servers in EA.
By not using not not the default Essbase node ' EssbaseCluster-1', he revealed the port number EAS uses to connect to essbase, in this case, 1443.»
The problem was that I did not have the correct port number, y at - it an easier way to find the correct port number?
See you soon,.
-
ESXi client cannot connect to the server from Suse
I'm putting a directory of a server OpenSuse on Esxi server, but when I try to add a new NFS, I get the error "unable to connect to the NFS server. I got this job in the past, but after restarting the Esxi, the nfs server has become inactive and, as indicated above, trying to mount a new nfs has failed. Two servers can ping each other. Any ideas why the Esxi would be impossible to connect?
NFS server really works on SUSE? Firewall allows NFS server work?
---
MCSA, MCTS, VCP, VMware vExpert 2009
-
linux 4 oracle 10g client to connect to the server window 2003 server, oracle 10g
Hello
I have my 10g oracle installed on windows server 2003 server.
On another system I have oracle 10g client is installed after edition of RedHat enterprise 4.
I want to connect my client to the database server.
I check using oracle universal install in that it shows installed products i.e.
Oracle 10g client is installed on the linex system.
but when I try to write a command like
and it doen't show any enty applications for oracle which is strange.[oracle@satish ~]$ sqlplus$ bash: sqlplus$: command not found [oracle@satish ~]$ tnsping bash: tnsping: command not found
as I am new to linux.
How to overcome this problem.
Thank you
UmeshInclude $ORACLE_HOME/bin in your path (not only $ORACLE_HOME):
export PATH=$PATH:/home/oracle/oracle/product/10.2.0/client_1/bin
Werner
-
WAG-120N and static ip - wireless and wired clients cannot connect to the internet
Greetings,
I use the N WAG-120 AP and switch for 3 computers laptops and 2 Office. Our Department is assigned only a what IP static of our server, as well as a pc can connect to the server and the internet. I use the first lan port of the 120N Wag as a WAN port and I attribute the static IP address, and the subnet, default gateway, and DNS addresses. Connected clients receive an ip address from the DHCP (192.168.1.10x) router, but cannot connect to the internet. How can I configure my router to allow clients to connect?
Thank you in advance!
The default LAN IP of the WAG subnet is 192.168.1.0/255.255.255.0 belongs to 192.168.0.0/255.255.0.0. This means that 192.168.1.0 IP addresses exist side WAN and LAN of the WAG. What makes this configuration completely cannot be routed.
Change the address LAN IP of the WAG to an IP outside the corporate network, for example using IP addresses private 172.16/12, for example to set the address LAN IP 172.16.1.1 with 255.255.255.0 subnet mask.
The alternative would be to use the WAG as a point of easy access only, and not as a router. However, due to the 255.255.0.0 subnet in your network company you will not be able to access the web interface except from an IP address corresponding to the LAN IP address subnet of the WAG. Of course, this does not affect the wireless or wireline customers connected to the WAG...
-
Client cannot connect to the ESX Server
I have 3 Server ESX 3.5 update 2. I can't connect to them using the VI client and I can not navigate to the IP Address of the server. I can telnet to the port 902 and 903 but not 443.
The guests are working well.
When I use the VI client I get customer VI could not establish the initial connection with the server. Details: a connection failure has occurred.
Could someone tell me what command should I enter to start the service 443 or anything else, I need to check?
Thank you
See this KB http://kb.vmware.com/kb/1003561
If you can access SSH to the host in question, reboot pass can fix.
the type of service console:
service mgmt-vmware restart
If this device or any other response was 'useful' or 'proper' Please consider awarding points
-
I have never been able to use creative application of cloud, I have to reinstall every time go. The question is always, it says can not connect to the server. My internet connections has always been. What is the problem.
Thank you
Log, activation, or connection errors. CS5.5 and later, Acrobat DC
https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-
Hi guys,.
I have a big problem to update my CC cloud. It stops at 2% and I don't really know what to do. It is really urgent, and I hope someone is able to solve my problem.
Artur
Hello
Please see cloud creative app: updated installation: stuck at 2% Message 'tries to connect to the server'
Hope that helps!
Kind regards
Sheena
-
Dear professionals
I am trying to connect to connect to the server via the Client view Horizon but when I enter the IP of the server connection I got the error message indicating that
connection to the server was not a valid license key (see attached photo)
everything has been installed and configured correctly, I added the vcenter Server view Portal administrator and I also added new swimming pool inside
See administrator portal, but I don't have the login server license key.
should I really buy the connection to the license key server? is there any version of the elevation of the connection to the server?
Please help me
Thank you
naoufl
Yes you need a license key to use the view of the Horizon, there is a 60-day evaluation license if you register here:
-
I'm putting it on my new website www.mahoganyridgetobago.com
I get the same message that Firefox can't find the server.Hi mahoganyridge.
I am able to view your site perfectly using Firefox 10. I hope that this error has resolved for you. If this isn't the case, I would like to ask if you are able to view other sites - or if it's the only one with a problem?
Maybe you are looking for
-
Listed in a short list of sites from where I want Firefox blocks cookies (doubleclick, for example), following the instructions on https://support.mozilla.com/en-US/kb/Enabling%20and%20disabling%20cookies. However, when I close the browser, the next
-
Apple Mail shows gmail in 2 places...
The left column of Apple Mail shows gmail accounts in 2 places. Under the mailboxes up and then again lower down with folders marked ' staff, recipes, important, deleted, drafts, messages sent messages, travel, work. I REALLY want to get rid of these
-
I installed my new GS116. Low 8 ports all have their del. regardless of the connected cables. High 8 ports have all of the lights. Yet once, wiring makes no difference. Other than return ideas?
-
Hello I have an old Evo D510 with a card mother 07E8h. My processor is a core 2.53 GHz Northwood 533 MHz FSB and 512 KB of L2 cache speed. I can't find any information wheter or not this motherboard supports a more than 533 MHz or 800 MHz FSB speed.
-
Hi guys,. IM writing from the Germany. I just installed Windows 7 on my laptop 1160eg. Everything works great and the system is fast enough. But in my system controls there are a few missing drivers. His exclamation yellow pointing to some components