What data download Capacity Planner

Similar Questions

• Strength of re - download all the data the Capacity Planner tool

  Hello

  I have a situation where a colleague installed Capacity Planner on a site and left on for more than a month before having a capacity planner account in the warehouse of VMWare (optimize.vmware.com).

  This means that the tool has been happily collecting data locally but he not sent to the Web site.

  He obtained his full story last week and made the link to the online store by registering its local database with the site ID. However, it seems that the capacity planner tool has not downloaded all the data it has collected - he made only in the last two weeks, and it doesn't seem it's going to 'catch up' and recover old data.

  I looked in the local Access database and you can see all the old data in there. Question - is it possible to force a re-synchronization of all data in the local database, while the old data are sent to the server? I tried Admin/Options/Modules, enter the work of data synchronization and uncheck everything except export data collection and send data, then manually run this task of data synchronization, but he only made a partial dump of the data.

  If the data have never been sent to VMware.  The data must be in the folder "c:\program files\vmwaer\vmware capacity planner\outbox.

  If the data have been sent, and archive check box has been selected, the data must be in the folder "c:\program files\vmwaer\vmware capacity planner\archive.

  If the data has been sent and the box archive was not checked, then the data will be only at VMware.  You will need to contact vmware to reprocess data.

• Y at - it update Dell Capacity Planner or similar?

  Hello.  I searched for a calculator / planner that will tell me the power requirements of the Dell Poweredge 13 G rack of servers with various configurations.

  I found a copy of the DataCenter Capacity Planner to http://www.dell.com/html/us/products/rack_advisor_new/, that looks like exactly what I want, except that it lists only the old servers.

  Y at - it a more updated version of this somewhere?  Or he was replaced by another tool?

  Thanks for any help.

  (PS. I was going to make this post in the PowerEdge Rack HW forum, but for some reason that I can't create messages in this one).

  Hello.

  The tool you are looking for is called the Dell Energy Smart Solution Advisor (ESSA). See the link: www.dell.com/.../config_calculator. You will also find the Data Center Capacity Planner (DCCP) at the bottom of the same page.

• VMware Capacity Planner: Not enough data.

  Dear friends,

  I have faced a problem with Vmware Capacity Planner. I get the error message no sufficient data not collected. But I can see nominative colleacted under the name of the company. I can view the files downloaded and processed inventory and performance. In addition, the report tab is not functional.

  Please do not advise.

  Thank you

  Pravesh

  CP sends always properly deltas of the inventory of what I have seen in the past.

  If you have added servers and they show OK in the report of missing data, then forcing a complete inventory should do the trick. The thing is that you must activate it in the right place. If you do a MANUAL synchronization, you must select the full inventory of strength under modules. If you wait for the next scheduled synchronization, you do it under scheduled tasks.

  Ignore the suggestion of proxy. If some of the data is how to get there, then internet proxy settings are correct.

  Dave

• Import Performance data in VMware Capacity Planner

  VMware Capacity Planner has the ability to import performance data in data manager or you must collect data from performance via the Capacity Planner software?

  Hello wgmaurerEMC,

  
  

  You can collect data from target of UNIX and Linux machines running the CP shell on each target computer scripts

  rather than run the scripts through the host of collector.

  Please, see page 47 of the CP reference Guide attached on how to implement the manual execution of scripts.

  Best regards

  Lazar

• How to get this capacity planner & what is its requirements?

  Hi friends,

  I'm looking for this product in the world, but its not available anywhere? How can we get this software? Is there a trial version? What is its needs, someone can explain to me please?

  Thank you!

  AFAIK Capacity Planner is only available for VMware partners, and the people using it are asked to take training online as well as a brief review.

  André

• Capacity planner, no data help

  Sorry if this is the wrong place for this topic, but I can't find a specific forum for the capacity planner.

  I installed a collector on a site and registered 20 machines. I registered the database ID in the dashboard. the collector is collecting information regularly and it shows that the data are uploaded. but I waited for 3 days now and the dashboard shows always do not all data.

  am I missing something? where should I start looking?

  Thank you

  Do you not see that the systems when you open the tab 'Select systems' for you're your project in "Administration"-> "my projects"?

  André

• VMware Capacity Planner data report - shows don't not all systems in the dashboard Version 2.7

  I worked on an evaluation with over 1300 machines for a few weeks now. I just ran a VMware capacity Planner data report today and it shows that 37 systems. Anyone else having this problem? I started a Monday SR something else and still have no answer, so I thought I would try the forum first this time.

  Dave Convery

  VMware vExpert 2009

  http://www.dailyhypervisor.com

  Prudent. We do not want to make of this.

  Bill Watterson, "Calvin and Hobbes".

  Try to create a group of man LAN and add the systems and re - run the report.

  Which fixed the problem with a report, I ran...

• Capacity Planner - no report?

  Hi all

  I'm doing my first run with Capacity Planner and I run a CBS for our internal environment as a test.  The collector has worked for several weeks and it seems to work fine (data, logs display the data are synchronized, reports run).  However when I connect to http://optimize.vmware.com I can't generate all reports.  If I open the dashboard of company I see data (lists systems, performance indicators, etc.) and the company status that it y 24 systems to consider.  The 'Reports' tab is dimmed and does not respond to clicks.

  I'm sure that a few step or the configuration is missing, but I can't understand what it is.  If someone could point me in the right direction that would be great.

  Thanks for your time,

  Amanda

  Maybe you should check to define your project... whether the server or desktop.

  Then choose or define the target server that you want to include in the reports.

  (administration-> my project->, and then choose your project)

• Capacity Planner 2.7.2 Linux error

  I have Capacity Planner 2.7.2 installed on the customer's site.  It is installed in a virtual VMware 4.1 computer.  I am so he could collect data from performance on 4 hosts ESXi 4.1.  When you try to perform the inventory or the performance on these 4 servers I received the following error message: "the default shell of connection is not supported.  Can someone tell me what is not set correctly?

  You cannot monitor ESX host because there is no part of the operating system that is supported. You can use the batch ESXtop mode or vcenter (if you have one) to monitor the performance of your host.

• Is it possible to move a Capacity Planner database between partners VMware ID?

  Hello

  I have an installation Capacity Planner, set up by a former partner of VMWare. It is still running and configured to do pretty much what I want to do, so I no need to remove and re-create it. I can not just to create a new company in my dash then stick the database id, he complains as being 'already possessed.

  Can anyone provide a solution to this?

  Mike

  My understanding is no, you can't, you can offer to do the CP using your dashboard of the companies. You can try asking the other company to create an account in this corporate ID and allow you to have access to the data in this way.

  It might also be possible to get the original CP partner to disconnect the collector (ID) and provide you with the collector ID to attach to your new ID of company in your dashboard - never tried so I don't know if it's possible. Most partners are not too to give they collected data of another competitor, so I would not take on a lot of luck of what happens even if it were possible.

• Collector capacity Planner

  Is is possible to assign the same collector to two different customer id without causing problems?

  Hi Rob,

  On the site of VMware Capacity Planner, you can create groups of system assessment - group system.  You can configure the report of the EC to only select the group in the report.

  Looks like you are using a collector to collect data from different location in different time period.  You can also choose what time is best for your report of the CE.

• Capacity Planner tool query

  I have following queries about this tool:

  1 can I use several model material for one scenario for example if I need to develop two types of material saying low and high-end and would like to place the result of the VM, is there an available way to achieve this?

  2. If the server under evaluation receive their IP address of the DHCP server and evaluating servers go down during the assessment and it comes back later with diffferent IP how corelate the previous data?

  3. as a follow-up to Question #2, what happens if the IP remains same. It will be able to collect data from the systems being evaluated?

  4. I need to understand the "Averge industry" in detail. What is the basis of filling it and how he is referred to as "Standardized", without providing details.

  First of all. My experience of the Capacity Planner tool is old, then you want to dubble some offsets verify what I say.

  1. you must decide what systems are low-end and high-end. Then, you make a scenario using the 'high end' group modeled on high-end hardware. Then, obviosly, the Group of low range on a low-end hardware. To my knowledge there is no way for the Capacity Planner automatically determine what are the high or low end systems and plce on different hardware models.

  2 capacity planner will then see that as two different systems, BUT, even if you have a DHCP server based Park (which is not so common actually) server and the server has been down longer the term of the lease to configure the DHCP scope the first thing that the server will ask you when it comes is back the permission to use the last him, called IP address. So if that is not granted to a plaintiff again the server will come with its old IP address in most cases.

  3. Yes

  4. the 'average/standard industrial' is simply statistical. For example if the average of 1000 SQL servers out there shows a specific behavior and your SQL Server performed way differently (uses a lot more resources), then you might want to consider why your implementation is so different. To avoid purchase Super material just to accommodate a messed-up SQL Server when you might be happier with a slower material, or less, if you just set your SQL implementation. That's all.

  / R

• What data should I save MANUALLY before you install as 'NEW iPhone '?

  Hi all

  I get a new iPhone 6 in the bar of genius for various reasons and I'm being advised to do a fresh install of the phone that I understand to be the following:

  1. synchronize with me.com (check to verify that all the settings are checked if I get all the data downloaded from the phone Apple)

  2. set up my multiple (set up gmail accounts must synchronize all synchronized data from google) e-mail accounts

  3. MANUALLY download the apps I need iTunes on the computer I ran my latest backup (mac pro)

  now, the issue seems to be that there is DATA that will not be transferred in this process. and increasingly hate losing data - I run a business so data loss could end up being a major pain.

  as an example there are TEXT messages that are on the phone which are not in iMessage on my laptop as a result of their Exchange with a person on a basis of message text and not on a basis iMessage. I use these texts constantly come into contact with people with whom I work or find an address or remember something that was sent to me in a text message.

  A. anyone know if there are OTHER data elements (other than the apps) that I have to synchronize MANUALLY or to migrate my iPhone newly implemented?

  B. what someone know how I would get to a newly developed iPhone TEXT message data in place?

  (C) what could I be missing here for a smooth transition?

  I'm kind of caught between the proverbial brick and the Anvil because I can not continue to use a phone that is upward at inopportune moments, but as I won't be careless and lose important data that will make problematic things.

  Thank you

  Is your old phone damaged or defective right? Here's what I would do, unless you think that the data on the old phone is actually corrupted.

  Transfer the contents of an iPhone, iPad or iPod touch to a new device - Apple Support

  If the above does not work, you always have the possibility to set-up like New but you risk losing data indeed.

• New material in Capacity Planner

  Hello

  Sorry if these are fundamental questions - his age since I used ability cards!

  I look at is equipment and ability cards models - but all systems are quite old. Do new systems added automatically or is there and easy way for me to add a? For example, I was hoping to use Lenovo X 3650 servers in my assessment of consolidation, but there is no entry of Lenovo, I see. Even former IBM 3650 x models are not suitable.

  No one knows when the capacity planner is updated to include the version 6 of vSphere?

  Finally, for the system settings there are three parameters of the disc for a host ESXi - size, speed and i/o speed, what should be? Am I right in assuming that the size is the size of the storage SAN (in my case 40 to), the speed is the speed of connection (in my case 8 GB FC) and the e/s? (No idea). Or am I wrong?

  Thanks a lot for your help!

  Select your company on the left side, and then go to tools select society project (in the menu bar black). system models.